Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 07/81] drm/i915/hdmi: convert to encoder->disable/enable
Date: Wed, 11 Jul 2012 16:27:50 +0200
Message-ID: <1342016944-23395-8-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1342016944-23395-1-git-send-email-daniel.vetter@ffwll.ch>

I've picked hdmi as the first encoder to convert because it's rather
simple:
- no cloning possible
- no differences between prepare/commit and dpms off/on switching.

A few changes are required to do so:
- Split up the dpms code into an enable/disable function and wire it
  up with the intel encoder.
- Noop out the existing encoder prepare/commit functions used by the
  crtc helper - our crtc enable/disable code now calls back into the
  encoder enable/disable code at the right spot.
- Create new helper functions to handle dpms changes.
- Add intel_encoder->connectors_active to better track dpms state. Atm
  this is unused, but it will be useful to correctly disable the
  entire display pipe for cloned configurations. Also note that for
  now this is only useful in the dpms code - thanks to the crtc
  helper's dpms confusion across a modeset operation we can't (yet)
  rely on this having a sensible value in all circumstances.
- Rip out the encoder helper dpms callback, if this is still getting
  called somewhere we have a bug. The slight issue with that is that
  the crtc helper abuses dpms off to disable unused functions. Hence
  we also need to implement a default encoder disable function to do
  just that with the new encoder->disable callback.
- Note that we drop the cpt modeset verification in the commit
  callback, too. The right place to do this would be in the crtc's
  enable function, _after_ all the encoders are set up. But because
  not all encoders are converted yet, we can't do that. Hence disable
  this check temporarily as a minor concession to bisectability.

v2: Squash the dpms mode to only the supported values -
connector->dpms is for internal tracking only, we can hence avoid
needless state-changes a bit whithout causing harm.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_ddi.c     |   28 +++++---
 drivers/gpu/drm/i915/intel_display.c |   49 +++++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |    8 ++-
 drivers/gpu/drm/i915/intel_hdmi.c    |  126 +++++++++++++++++++++++-----------
 4 files changed, 160 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 933c748..fd60f48 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -738,21 +738,16 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
 	intel_hdmi->set_infoframes(encoder, adjusted_mode);
 }
 
-void intel_ddi_dpms(struct drm_encoder *encoder, int mode)
+void intel_enable_ddi(struct intel_encoder *encoder)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
 	int port = intel_hdmi->ddi_port;
 	u32 temp;
 
 	temp = I915_READ(DDI_BUF_CTL(port));
-
-	if (mode != DRM_MODE_DPMS_ON) {
-		temp &= ~DDI_BUF_CTL_ENABLE;
-	} else {
-		temp |= DDI_BUF_CTL_ENABLE;
-	}
+	temp |= DDI_BUF_CTL_ENABLE;
 
 	/* Enable DDI_BUF_CTL. In HDMI/DVI mode, the port width,
 	 * and swing/emphasis values are ignored so nothing special needs
@@ -761,3 +756,18 @@ void intel_ddi_dpms(struct drm_encoder *encoder, int mode)
 	I915_WRITE(DDI_BUF_CTL(port),
 			temp);
 }
+
+void intel_disable_ddi(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	int port = intel_hdmi->ddi_port;
+	u32 temp;
+
+	temp = I915_READ(DDI_BUF_CTL(port));
+	temp &= ~DDI_BUF_CTL_ENABLE;
+
+	I915_WRITE(DDI_BUF_CTL(port),
+			temp);
+}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 1ea3776..1a201b2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3542,6 +3542,17 @@ void intel_encoder_commit(struct drm_encoder *encoder)
 		intel_cpt_verify_modeset(dev, intel_crtc->pipe);
 }
 
+void intel_encoder_noop(struct drm_encoder *encoder)
+{
+}
+
+void intel_encoder_disable(struct drm_encoder *encoder)
+{
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+
+	intel_encoder->disable(intel_encoder);
+}
+
 void intel_encoder_destroy(struct drm_encoder *encoder)
 {
 	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
@@ -3550,6 +3561,44 @@ void intel_encoder_destroy(struct drm_encoder *encoder)
 	kfree(intel_encoder);
 }
 
+/* Simple dpms helper for encodres with just one connector, no cloning and only
+ * one kind of off state. It clamps all !ON modes to fully OFF and changes the
+ * state of the entire output pipe. */
+void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
+{
+	if (mode == DRM_MODE_DPMS_ON) {
+		encoder->connectors_active = true;
+
+		intel_crtc_dpms(encoder->base.crtc, DRM_MODE_DPMS_ON);
+	} else {
+		encoder->connectors_active = false;
+
+		intel_crtc_dpms(encoder->base.crtc, DRM_MODE_DPMS_OFF);
+	}
+}
+
+/* Even simpler default implementation, if there's really no special case to
+ * consider. */
+void intel_connector_dpms(struct drm_connector *connector, int mode)
+{
+	struct intel_encoder *encoder = intel_attached_encoder(connector);
+
+	/* All the simple cases only support two dpms states. */
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	if (encoder->base.crtc)
+		intel_encoder_dpms(encoder, mode);
+	else
+		encoder->connectors_active = false;
+}
+
 static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
 				  struct drm_display_mode *mode,
 				  struct drm_display_mode *adjusted_mode)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 4ac2373..16680e5 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -152,6 +152,7 @@ struct intel_encoder {
 	struct drm_encoder base;
 	int type;
 	bool needs_tv_clock;
+	bool connectors_active;
 	void (*hot_plug)(struct intel_encoder *);
 	void (*enable)(struct intel_encoder *);
 	void (*disable)(struct intel_encoder *);
@@ -395,7 +396,11 @@ extern enum drm_connector_status intel_panel_detect(struct drm_device *dev);
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
 extern void intel_encoder_prepare(struct drm_encoder *encoder);
 extern void intel_encoder_commit(struct drm_encoder *encoder);
+extern void intel_encoder_noop(struct drm_encoder *encoder);
+extern void intel_encoder_disable(struct drm_encoder *encoder);
 extern void intel_encoder_destroy(struct drm_encoder *encoder);
+extern void intel_encoder_dpms(struct intel_encoder *encoder, int mode);
+extern void intel_connector_dpms(struct drm_connector *, int mode);
 
 static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector)
 {
@@ -504,7 +509,8 @@ extern void intel_disable_gt_powersave(struct drm_device *dev);
 extern void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv);
 extern void ironlake_teardown_rc6(struct drm_device *dev);
 
-extern void intel_ddi_dpms(struct drm_encoder *encoder, int mode);
+extern void intel_enable_ddi(struct intel_encoder *encoder);
+extern void intel_disable_ddi(struct intel_encoder *encoder);
 extern void intel_ddi_mode_set(struct drm_encoder *encoder,
 				struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 5b2c88c..188399f 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -601,11 +601,11 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder,
 	intel_hdmi->set_infoframes(encoder, adjusted_mode);
 }
 
-static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
+static void intel_enable_hdmi(struct intel_encoder *encoder)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
 	u32 temp;
 	u32 enable_bits = SDVO_ENABLE;
 
@@ -617,31 +617,12 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
 	/* HW workaround for IBX, we need to move the port to transcoder A
 	 * before disabling it. */
 	if (HAS_PCH_IBX(dev)) {
-		struct drm_crtc *crtc = encoder->crtc;
+		struct drm_crtc *crtc = encoder->base.crtc;
 		int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1;
 
-		if (mode != DRM_MODE_DPMS_ON) {
-			if (temp & SDVO_PIPE_B_SELECT) {
-				temp &= ~SDVO_PIPE_B_SELECT;
-				I915_WRITE(intel_hdmi->sdvox_reg, temp);
-				POSTING_READ(intel_hdmi->sdvox_reg);
-
-				/* Again we need to write this twice. */
-				I915_WRITE(intel_hdmi->sdvox_reg, temp);
-				POSTING_READ(intel_hdmi->sdvox_reg);
-
-				/* Transcoder selection bits only update
-				 * effectively on vblank. */
-				if (crtc)
-					intel_wait_for_vblank(dev, pipe);
-				else
-					msleep(50);
-			}
-		} else {
-			/* Restore the transcoder select bit. */
-			if (pipe == PIPE_B)
-				enable_bits |= SDVO_PIPE_B_SELECT;
-		}
+		/* Restore the transcoder select bit. */
+		if (pipe == PIPE_B)
+			enable_bits |= SDVO_PIPE_B_SELECT;
 	}
 
 	/* HW workaround, need to toggle enable bit off and on for 12bpc, but
@@ -652,12 +633,67 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
 		POSTING_READ(intel_hdmi->sdvox_reg);
 	}
 
-	if (mode != DRM_MODE_DPMS_ON) {
-		temp &= ~enable_bits;
-	} else {
-		temp |= enable_bits;
+	temp |= enable_bits;
+
+	I915_WRITE(intel_hdmi->sdvox_reg, temp);
+	POSTING_READ(intel_hdmi->sdvox_reg);
+
+	/* HW workaround, need to write this twice for issue that may result
+	 * in first write getting masked.
+	 */
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(intel_hdmi->sdvox_reg, temp);
+		POSTING_READ(intel_hdmi->sdvox_reg);
+	}
+}
+
+static void intel_disable_hdmi(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	u32 temp;
+	u32 enable_bits = SDVO_ENABLE;
+
+	if (intel_hdmi->has_audio)
+		enable_bits |= SDVO_AUDIO_ENABLE;
+
+	temp = I915_READ(intel_hdmi->sdvox_reg);
+
+	/* HW workaround for IBX, we need to move the port to transcoder A
+	 * before disabling it. */
+	if (HAS_PCH_IBX(dev)) {
+		struct drm_crtc *crtc = encoder->base.crtc;
+		int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1;
+
+		if (temp & SDVO_PIPE_B_SELECT) {
+			temp &= ~SDVO_PIPE_B_SELECT;
+			I915_WRITE(intel_hdmi->sdvox_reg, temp);
+			POSTING_READ(intel_hdmi->sdvox_reg);
+
+			/* Again we need to write this twice. */
+			I915_WRITE(intel_hdmi->sdvox_reg, temp);
+			POSTING_READ(intel_hdmi->sdvox_reg);
+
+			/* Transcoder selection bits only update
+			 * effectively on vblank. */
+			if (crtc)
+				intel_wait_for_vblank(dev, pipe);
+			else
+				msleep(50);
+		}
 	}
 
+	/* HW workaround, need to toggle enable bit off and on for 12bpc, but
+	 * we do this anyway which shows more stable in testing.
+	 */
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(intel_hdmi->sdvox_reg, temp & ~SDVO_ENABLE);
+		POSTING_READ(intel_hdmi->sdvox_reg);
+	}
+
+	temp &= ~enable_bits;
+
 	I915_WRITE(intel_hdmi->sdvox_reg, temp);
 	POSTING_READ(intel_hdmi->sdvox_reg);
 
@@ -849,23 +885,23 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
 }
 
 static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs_hsw = {
-	.dpms = intel_ddi_dpms,
 	.mode_fixup = intel_hdmi_mode_fixup,
-	.prepare = intel_encoder_prepare,
+	.prepare = intel_encoder_noop,
 	.mode_set = intel_ddi_mode_set,
-	.commit = intel_encoder_commit,
+	.commit = intel_encoder_noop,
+	.disable = intel_encoder_disable,
 };
 
 static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = {
-	.dpms = intel_hdmi_dpms,
 	.mode_fixup = intel_hdmi_mode_fixup,
-	.prepare = intel_encoder_prepare,
+	.prepare = intel_encoder_noop,
 	.mode_set = intel_hdmi_mode_set,
-	.commit = intel_encoder_commit,
+	.commit = intel_encoder_noop,
+	.disable = intel_encoder_disable,
 };
 
 static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_connector_dpms,
 	.detect = intel_hdmi_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_hdmi_set_property,
@@ -987,10 +1023,18 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 		intel_hdmi->set_infoframes = cpt_set_infoframes;
 	}
 
-	if (IS_HASWELL(dev))
-		drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs_hsw);
-	else
-		drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs);
+	if (IS_HASWELL(dev)) {
+		intel_encoder->enable = intel_enable_ddi;
+		intel_encoder->disable = intel_disable_ddi;
+		drm_encoder_helper_add(&intel_encoder->base,
+				       &intel_hdmi_helper_funcs_hsw);
+	} else {
+		intel_encoder->enable = intel_enable_hdmi;
+		intel_encoder->disable = intel_disable_hdmi;
+		drm_encoder_helper_add(&intel_encoder->base,
+				       &intel_hdmi_helper_funcs);
+	}
+
 
 	intel_hdmi_add_properties(intel_hdmi, connector);
 
-- 
1.7.7.6

  parent reply index

Thread overview: 107+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-11 14:27 [PATCH 00/81] modeset rework Daniel Vetter
2012-07-11 14:27 ` [PATCH 01/81] drm/i915: add crtc->enable/disable vfuncs insted of dpms Daniel Vetter
2012-07-11 14:27 ` [PATCH 02/81] drm/i915: rip out crtc prepare/commit indirection Daniel Vetter
2012-07-12 14:44   ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 03/81] drm/i915: add direct encoder disable/enable infrastructure Daniel Vetter
2012-07-11 14:27 ` [PATCH 04/81] drm/i915: add missing gen2 pipe A quirk entries Daniel Vetter
2012-07-11 14:27 ` [PATCH 05/81] drm/i915: rip out the overlay pipe A workaround Daniel Vetter
2012-07-11 14:27 ` [PATCH 06/81] drm/i915: prepare load-detect pipe code for dpms changes Daniel Vetter
2012-07-11 14:27 ` Daniel Vetter [this message]
2012-07-11 14:27 ` [PATCH 08/81] drm/i915/tv: convert to encoder enable/disable Daniel Vetter
2012-07-11 14:27 ` [PATCH 09/81] drm/i915/lvds: ditch ->prepare special case Daniel Vetter
2012-07-22 14:52   ` Daniel Vetter
2012-07-22 16:32     ` Takashi Iwai
2012-07-22 19:20       ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 10/81] drm/i915/lvds: convert to encoder disable/enable Daniel Vetter
2012-07-11 14:27 ` [PATCH 11/81] drm/i915/dp: " Daniel Vetter
2012-07-11 14:27 ` [PATCH 12/81] drm/i915: create VLV_DSIPLAY_BASE #define Daniel Vetter
2012-07-20 12:07   ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 13/81] drm/i915: group ADPA #defines together Daniel Vetter
2012-07-12 13:06   ` Paulo Zanoni
2012-07-11 14:27 ` [PATCH 14/81] drm/i915: add inte_crt->adpa_reg Daniel Vetter
2012-07-20 11:56   ` Chris Wilson
2012-07-20 12:09   ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 15/81] drm/i915/crt: convert to encoder disable/enable Daniel Vetter
2012-07-11 14:27 ` [PATCH 16/81] drm/i915/sdvo: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 17/81] drm/i915: simplify dvo dpms interface Daniel Vetter
2012-07-11 14:28 ` [PATCH 18/81] drm/i915/dvo: convert to encoder disable/enable Daniel Vetter
2012-07-11 14:28 ` [PATCH 19/81] drm/i915: simplify possible_clones computation Daniel Vetter
2012-07-12 18:10   ` Paulo Zanoni
2012-07-12 18:47     ` Daniel Vetter
2012-07-12 18:08       ` [PATCH] " Daniel Vetter
2012-07-12 19:48         ` Paulo Zanoni
2012-07-11 14:28 ` [PATCH 20/81] drm/i915: add port parameter to intel_hdmi_init Daniel Vetter
2012-07-12 18:19   ` [PATCH] " Daniel Vetter
2012-07-12 19:49     ` Paulo Zanoni
2012-07-17  8:43       ` Daniel Vetter
2012-07-11 14:28 ` [PATCH 21/81] drm/i915: convert dpms functions of dvo/sdvo/crt Daniel Vetter
2012-07-11 14:28 ` [PATCH 22/81] drm/i915: rip out encoder->disable/enable checks Daniel Vetter
2012-07-11 14:28 ` [PATCH 23/81] drm/i915: clean up encoder_prepare/commit Daniel Vetter
2012-07-11 14:28 ` [PATCH 24/81] drm/fb helper: don't call drm_crtc_helper_set_config Daniel Vetter
2012-07-18 15:49   ` Daniel Vetter
2012-07-18 15:50     ` Daniel Vetter
2012-07-20  1:17       ` Dave Airlie
2012-07-11 14:28 ` [PATCH 25/81] drm: remove the list_head from drm_mode_set Daniel Vetter
2012-07-20  1:23   ` Dave Airlie
2012-07-11 14:28 ` [PATCH 26/81] drm/i915: copy&paste drm_crtc_helper_set_config Daniel Vetter
2012-07-11 14:28 ` [PATCH 27/81] drm/i915: call set_base directly Daniel Vetter
2012-07-11 14:28 ` [PATCH 28/81] drm/i915: inline intel_best_encoder Daniel Vetter
2012-07-11 14:28 ` [PATCH 29/81] drm/i915: copy&paste drm_crtc_helper_set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 30/81] drm/i915: simplify intel_crtc_prepare_encoders Daniel Vetter
2012-07-11 14:28 ` [PATCH 31/81] drm/i915: rip out encoder->prepare/commit Daniel Vetter
2012-07-11 14:28 ` [PATCH 32/81] drm/i915: call crtc functions directly Daniel Vetter
2012-07-11 14:28 ` [PATCH 33/81] drm/i915: WARN when trying to enabled an unused crtc Daniel Vetter
2012-07-11 14:28 ` [PATCH 34/81] drm/i915: Add interfaces to read out encoder/connector hw state Daniel Vetter
2012-07-11 14:28 ` [PATCH 35/81] drm/i915/dp: implement get_hw_state Daniel Vetter
2012-07-11 14:28 ` [PATCH 36/81] drm/i915/hdmi: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 37/81] drm/i915/tv: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 38/81] drm/i915/lvds: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 39/81] drm/i915/crt: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 40/81] drm/i915/sdvo: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 41/81] drm/i915/dvo: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 42/81] drm/i915: read out the modeset hw state at load and resume time Daniel Vetter
2012-07-11 14:28 ` [PATCH 43/81] drm/i915: check connector hw/sw state Daniel Vetter
2012-07-11 14:28 ` [PATCH 44/81] drm/i915: rip out intel_crtc->dpms_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 45/81] drm/i915: rip out intel_dp->dpms_mode Daniel Vetter
2012-07-26 18:06   ` Paulo Zanoni
2012-07-11 14:28 ` [PATCH 46/81] drm/i915: ensure the force pipe A quirk is actually followed Daniel Vetter
2012-07-11 14:28 ` [PATCH 47/81] drm/i915: introduce struct intel_set_config Daniel Vetter
2012-07-11 14:28 ` [PATCH 48/81] drm/i915: extract modeset config save/restore code Daniel Vetter
2012-07-11 14:28 ` [PATCH 49/81] drm/i915: extract intel_set_config_compute_mode_changes Daniel Vetter
2012-07-11 14:28 ` [PATCH 50/81] drm/i915: extract intel_set_config_update_output_state Daniel Vetter
2012-07-11 14:28 ` [PATCH 51/81] drm/i915: implement crtc helper semantics relied upon by the fb helper Daniel Vetter
2012-07-11 14:28 ` [PATCH 52/81] drm/i915: don't update the fb base if there is no fb Daniel Vetter
2012-07-11 14:28 ` [PATCH 53/81] drm/i915: convert pointless error checks in set_config to BUGs Daniel Vetter
2012-07-11 14:28 ` [PATCH 54/81] drm/i915: don't save all the encoder/crtc state in set_config Daniel Vetter
2012-07-11 14:28 ` [PATCH 55/81] drm/i915: stage modeset output changes Daniel Vetter
2012-07-11 14:28 ` [PATCH 56/81] drm/i915: push crtc->fb update into pipe_set_base Daniel Vetter
2012-07-11 14:28 ` [PATCH 57/81] drm/i915: remove crtc disabling special case Daniel Vetter
2012-07-11 14:28 ` [PATCH 58/81] drm/i915: move output commit and crtc disabling into set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 59/81] drm/i915: extract adjusted mode computation Daniel Vetter
2012-07-11 14:28 ` [PATCH 60/81] drm/i915: use staged outuput config in tv->mode_fixup Daniel Vetter
2012-07-11 14:28 ` [PATCH 61/81] drm/i915: use staged outuput config in lvds->mode_fixup Daniel Vetter
2012-07-11 14:28 ` [PATCH 62/81] drm/i915: compute masks of crtcs affected in set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 63/81] drm/i915: implement new set_mode code flow Daniel Vetter
2012-07-11 14:28 ` [PATCH 64/81] drm/i915: push commit_output_state past crtc disabling Daniel Vetter
2012-07-11 14:28 ` [PATCH 65/81] drm/i915: s/intel_encoder_disable/intel_encoder_noop Daniel Vetter
2012-07-11 14:28 ` [PATCH 66/81] drm/i915: kill a few unused things in dev_priv Daniel Vetter
2012-07-11 14:28 ` [PATCH 67/81] drm/i915: WARN if the pipe won't turn off Daniel Vetter
2012-07-11 14:28 ` [PATCH 68/81] drm/i915: switch the load detect code to the staged modeset config Daniel Vetter
2012-07-11 14:28 ` [PATCH 69/81] drm/i915: push commit_output_state past the crtc/encoder preparing Daniel Vetter
2012-07-11 16:02   ` [PATCH] " Daniel Vetter
2012-07-11 14:28 ` [PATCH 70/81] drm/i915: disable all crtcs at suspend time Daniel Vetter
2012-07-11 14:28 ` [PATCH 71/81] drm/i915: add tons of modeset state checks Daniel Vetter
2012-07-11 17:46   ` [PATCH] " Daniel Vetter
2012-07-11 14:28 ` [PATCH 72/81] drm/i915: extract ironlake_fdi_pll_disable Daniel Vetter
2012-07-11 14:28 ` [PATCH 73/81] drm/i915: rip out intel_disable_pch_ports Daniel Vetter
2012-07-11 14:28 ` [PATCH 74/81] drm/i915: don't disable fdi links harder in ilk_crtc_enable Daniel Vetter
2012-07-11 14:28 ` [PATCH 75/81] drm/i915: don't call dpms funcs after set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 76/81] drm/i915: update dpms property in set_mode Daniel Vetter
2012-07-11 14:29 ` [PATCH 77/81] drm/i915: add encoder->pre_enable/post_disable Daniel Vetter
2012-07-11 14:29 ` [PATCH 78/81] drm/i915: clean up the cpu edp pll special case Daniel Vetter
2012-07-11 14:29 ` [PATCH 79/81] drm/i915: robustify edp_pll_on/off Daniel Vetter
2012-07-11 17:47   ` [PATCH] " Daniel Vetter
2012-07-11 14:29 ` [PATCH 80/81] drm/i915: rip out dp port enabling cludges^Wchecks Daniel Vetter
2012-07-11 14:38 ` [PATCH 81/81] drm/i915: disable the cpu edp port after the cpu pipe Daniel Vetter
2012-07-15 13:13 ` [PATCH 00/81] modeset rework Chris Wilson
2012-07-15 14:57   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1342016944-23395-8-git-send-email-daniel.vetter@ffwll.ch \
    --to=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git