intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Chris Wilson <chris@chris-wilson.co.uk>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 2/2] drm/i915: Prefer CRTC 'active' rather than 'enabled' during WM computations
Date: Fri,  7 Dec 2012 10:43:25 +0000	[thread overview]
Message-ID: <1354877005-31477-2-git-send-email-chris@chris-wilson.co.uk> (raw)
In-Reply-To: <1354877005-31477-1-git-send-email-chris@chris-wilson.co.uk>

Only the intel_crtc->active is accurate at the point where we wish to
perform WM computations, so use it instead of crtc->enabled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_pm.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 3eb21fa..07e0a2f 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -405,7 +405,7 @@ void intel_update_fbc(struct drm_device *dev)
 	 *   - going to an unsupported config (interlace, pixel multiply, etc.)
 	 */
 	list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
-		if (tmp_crtc->enabled &&
+		if (to_intel_crtc(tmp_crtc)->active &&
 		    !to_intel_crtc(tmp_crtc)->primary_disabled &&
 		    tmp_crtc->fb) {
 			if (crtc) {
@@ -995,7 +995,7 @@ static struct drm_crtc *single_enabled_crtc(struct drm_device *dev)
 	struct drm_crtc *crtc, *enabled = NULL;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		if (crtc->enabled && crtc->fb) {
+		if (to_intel_crtc(crtc)->active && crtc->fb) {
 			if (enabled)
 				return NULL;
 			enabled = crtc;
@@ -1089,7 +1089,7 @@ static bool g4x_compute_wm0(struct drm_device *dev,
 	int entries, tlb_miss;
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
-	if (crtc->fb == NULL || !crtc->enabled) {
+	if (crtc->fb == NULL || !to_intel_crtc(crtc)->active) {
 		*cursor_wm = cursor->guard_size;
 		*plane_wm = display->guard_size;
 		return false;
@@ -1218,7 +1218,7 @@ static bool vlv_compute_drain_latency(struct drm_device *dev,
 	int entries;
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
-	if (crtc->fb == NULL || !crtc->enabled)
+	if (crtc->fb == NULL || !to_intel_crtc(crtc)->active)
 		return false;
 
 	clock = crtc->mode.clock;	/* VESA DOT Clock */
@@ -1479,7 +1479,7 @@ static void i9xx_update_wm(struct drm_device *dev)
 
 	fifo_size = dev_priv->display.get_fifo_size(dev, 0);
 	crtc = intel_get_crtc_for_plane(dev, 0);
-	if (crtc->enabled && crtc->fb) {
+	if (to_intel_crtc(crtc)->active && crtc->fb) {
 		int cpp = crtc->fb->bits_per_pixel / 8;
 		if (IS_GEN2(dev))
 			cpp = 4;
@@ -1493,7 +1493,7 @@ static void i9xx_update_wm(struct drm_device *dev)
 
 	fifo_size = dev_priv->display.get_fifo_size(dev, 1);
 	crtc = intel_get_crtc_for_plane(dev, 1);
-	if (crtc->enabled && crtc->fb) {
+	if (to_intel_crtc(crtc)->active && crtc->fb) {
 		int cpp = crtc->fb->bits_per_pixel / 8;
 		if (IS_GEN2(dev))
 			cpp = 4;
@@ -2047,7 +2047,7 @@ sandybridge_compute_sprite_wm(struct drm_device *dev, int plane,
 	int entries, tlb_miss;
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
-	if (crtc->fb == NULL || !crtc->enabled) {
+	if (crtc->fb == NULL || !to_intel_crtc(crtc)->active) {
 		*sprite_wm = display->guard_size;
 		return false;
 	}
-- 
1.7.10.4

  reply	other threads:[~2012-12-07 10:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-07 10:43 [PATCH 1/2] drm/i915: Clear self-refresh watermarks when disabled Chris Wilson
2012-12-07 10:43 ` Chris Wilson [this message]
2012-12-10 20:58   ` [PATCH 2/2] drm/i915: Prefer CRTC 'active' rather than 'enabled' during WM computations Jesse Barnes
2012-12-17 11:39     ` Daniel Vetter
2012-12-10 20:57 ` [PATCH 1/2] drm/i915: Clear self-refresh watermarks when disabled Jesse Barnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1354877005-31477-2-git-send-email-chris@chris-wilson.co.uk \
    --to=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).