Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Chris Wilson <chris@chris-wilson.co.uk>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915: Scale ring, rather than ia, frequency on Haswell
Date: Wed, 10 Apr 2013 20:22:23 +0100
Message-ID: <1365621743-2761-1-git-send-email-chris@chris-wilson.co.uk> (raw)

Haswell introduces a separate frequency domain for the ring (uncore). So
where we used to increase the CPU (IA) clock with GPU busyness, we now
need to scale the ring frequency directly instead. As the ring limits
our memory bandwidth, it is vital for performance that when the GPU is
busy, we increase the frequency of the ring to increase the available
memory bandwidth.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_debugfs.c |    7 +++++--
 drivers/gpu/drm/i915/i915_reg.h     |    4 ++++
 drivers/gpu/drm/i915/intel_pm.c     |   39 ++++++++++++++++++++++-------------
 3 files changed, 34 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 7da45aa..6220d97 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1357,7 +1357,7 @@ static int i915_ring_freq_table(struct seq_file *m, void *unused)
 	if (ret)
 		return ret;
 
-	seq_printf(m, "GPU freq (MHz)\tEffective CPU freq (MHz)\n");
+	seq_printf(m, "GPU freq (MHz)\tEffective CPU freq (MHz)\tEffective Ring freq (MHz)\n");
 
 	for (gpu_freq = dev_priv->rps.min_delay;
 	     gpu_freq <= dev_priv->rps.max_delay;
@@ -1366,7 +1366,10 @@ static int i915_ring_freq_table(struct seq_file *m, void *unused)
 		sandybridge_pcode_read(dev_priv,
 				       GEN6_PCODE_READ_MIN_FREQ_TABLE,
 				       &ia_freq);
-		seq_printf(m, "%d\t\t%d\n", gpu_freq * GT_FREQUENCY_MULTIPLIER, ia_freq * 100);
+		seq_printf(m, "%d\t\t%d\t\t\t\t%d\n",
+			   gpu_freq * GT_FREQUENCY_MULTIPLIER,
+			   ((ia_freq >> 0) & 0xff) * 100,
+			   ((ia_freq >> 8) & 0xff) * 100);
 	}
 
 	mutex_unlock(&dev_priv->rps.hw_lock);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e0fc070..077d40f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1210,6 +1210,9 @@
 
 #define MCHBAR_MIRROR_BASE_SNB	0x140000
 
+/* Memory controller frequency in MCHBAR for Haswell (possible SNB+) */
+#define DCLK 0x5e04
+
 /** 915-945 and GM965 MCH register controlling DRAM channel access */
 #define DCC			0x10200
 #define DCC_ADDRESSING_MODE_SINGLE_CHANNEL		(0 << 0)
@@ -4390,6 +4393,7 @@
 #define   GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
 #define GEN6_PCODE_DATA				0x138128
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
+#define   GEN6_PCODE_FREQ_RING_RATIO_SHIFT	16
 
 #define VLV_IOSF_DOORBELL_REQ			0x182100
 #define   IOSF_DEVFN_SHIFT			24
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index baea4fc..59c3443 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2684,8 +2684,8 @@ static void gen6_update_ring_freq(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int min_freq = 15;
-	int gpu_freq;
-	unsigned int ia_freq, max_ia_freq;
+	unsigned int gpu_freq;
+	unsigned int max_ia_freq, max_ring_freq;
 	int scaling_factor = 180;
 
 	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
@@ -2701,6 +2701,10 @@ static void gen6_update_ring_freq(struct drm_device *dev)
 	/* Convert from kHz to MHz */
 	max_ia_freq /= 1000;
 
+	max_ring_freq = I915_READ(MCHBAR_MIRROR_BASE_SNB + DCLK);
+	/* convert DDR frequency from units of 133.3MHz to bandwidth */
+	max_ring_freq = (2 * 4 * max_ring_freq + 2)/ 3;
+
 	/*
 	 * For each potential GPU frequency, load a ring frequency we'd like
 	 * to use for memory access.  We do this by specifying the IA frequency
@@ -2709,21 +2713,28 @@ static void gen6_update_ring_freq(struct drm_device *dev)
 	for (gpu_freq = dev_priv->rps.max_delay; gpu_freq >= dev_priv->rps.min_delay;
 	     gpu_freq--) {
 		int diff = dev_priv->rps.max_delay - gpu_freq;
-
-		/*
-		 * For GPU frequencies less than 750MHz, just use the lowest
-		 * ring freq.
-		 */
-		if (gpu_freq < min_freq)
-			ia_freq = 800;
-		else
-			ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
-		ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
-		ia_freq <<= GEN6_PCODE_FREQ_IA_RATIO_SHIFT;
+		unsigned int ia_freq = 0, ring_freq = 0;
+
+		if (IS_HASWELL(dev)) {
+			ring_freq = (gpu_freq * 5 + 1) / 2;
+			ring_freq = max(max_ring_freq, gpu_freq);
+		} else {
+			/*
+			 * For GPU frequencies less than 750MHz,
+			 * just use the lowest ring freq.
+			 */
+			if (gpu_freq < min_freq)
+				ia_freq = 800;
+			else
+				ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
+			ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
+		}
 
 		sandybridge_pcode_write(dev_priv,
 					GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
-					ia_freq | gpu_freq);
+					ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT |
+					ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT |
+					gpu_freq);
 	}
 }
 
-- 
1.7.10.4

             reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-10 19:22 Chris Wilson [this message]
2013-04-10 19:45 ` Chris Wilson
2013-04-10 20:08   ` Daniel Vetter
2013-04-10 21:41   ` Jesse Barnes
2013-04-10 21:53     ` Chris Wilson
2013-04-12 18:10     ` Chris Wilson
2013-04-16  7:34       ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1365621743-2761-1-git-send-email-chris@chris-wilson.co.uk \
    --to=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git