intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Egbert Eich <eich@suse.de>
To: intel-gfx@lists.freedesktop.org
Cc: Egbert Eich <eich@suse.de>, Daniel Vetter <daniel.vetter@intel.com>
Subject: [PATCH 1/7] drm/i915: Add HPD IRQ storm detection (v5)
Date: Tue, 16 Apr 2013 13:36:54 +0200	[thread overview]
Message-ID: <1366112220-7638-1-git-send-email-eich@suse.de> (raw)
In-Reply-To: <20130416113458.GD17947@debian>

Add a hotplug IRQ storm detection (triggered when a hotplug interrupt
fires more than 5 times / sec).
Rationale:
Despite of the many attempts to fix the problem with noisy hotplug
interrupt lines we are still seeing systems which have issues:
Once cause of noise seems to be bad routing of the hotplug line
on the board: cross talk from other signals seems to cause erronous
hotplug interrupts. This has been documented as an erratum for the
the i945GM chipset and thus hotplug support was disabled for this
chipset model but others seem to have this problem, too.

We have seen this issue on a G35 motherboard for example:
Even different motherboards of the same model seem to behave
differently: while some only see only around 10-100 interrupts/s
others seem to see 5k or more.
We've also observed a dependency on the selected video mode.

Also on certain laptops interrupt noise seems to occur duing
battery charging when the battery is at a certain charge levels.

Thus we add a simple algorithm here that detects an 'interrupt storm'
condition.

v2: Fixed comment.
v3: Reordered drm_i915_private: moved hpd state tracking to hotplug work stuff.
v4: Followed by Jesse Barnes to use a time_..() macro.
v5: Fixed coding style as suggested by Jani Nikula.

Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_drv.h |  9 ++++++
 drivers/gpu/drm/i915/i915_irq.c | 69 ++++++++++++++++++++++++++++++++++-------
 2 files changed, 66 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 44fca0b..83fc1a6 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -929,6 +929,15 @@ typedef struct drm_i915_private {
 
 	struct work_struct hotplug_work;
 	bool enable_hotplug_processing;
+	struct {
+		unsigned long hpd_last_jiffies;
+		int hpd_cnt;
+		enum {
+			HPD_ENABLED = 0,
+			HPD_DISABLED = 1,
+			HPD_MARK_DISABLED = 2
+		} hpd_mark;
+	} hpd_stats[HPD_NUM_PINS];
 
 	int num_pch_pll;
 	int num_plane;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 4c5bdd0..71fc238 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -582,6 +582,40 @@ static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
 	queue_work(dev_priv->wq, &dev_priv->rps.work);
 }
 
+#define HPD_STORM_DETECT_PERIOD 1000
+#define HPD_STORM_THRESHOLD 5
+
+static inline void hotplug_irq_storm_detect(struct drm_device *dev,
+					    u32 hotplug_trigger,
+					    const u32 *hpd)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	unsigned long irqflags;
+	int i;
+
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+
+	for (i = 1; i < HPD_NUM_PINS; i++) {
+		if (!(hpd[i] & hotplug_trigger) ||
+		    dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED)
+			continue;
+
+		if (!time_in_range(jiffies, dev_priv->hpd_stats[i].hpd_last_jiffies,
+				   dev_priv->hpd_stats[i].hpd_last_jiffies
+				   + msecs_to_jiffies(HPD_STORM_DETECT_PERIOD))) {
+			dev_priv->hpd_stats[i].hpd_last_jiffies = jiffies;
+			dev_priv->hpd_stats[i].hpd_cnt = 0;
+		} else if (dev_priv->hpd_stats[i].hpd_cnt > HPD_STORM_THRESHOLD) {
+			dev_priv->hpd_stats[i].hpd_mark = HPD_MARK_DISABLED;
+			DRM_DEBUG_KMS("HPD interrupt storm detected on PIN %d\n", i);
+		} else {
+			dev_priv->hpd_stats[i].hpd_cnt++;
+		}
+	}
+
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+}
+
 static void gmbus_irq_handler(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -650,13 +684,15 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 		/* Consume port.  Then clear IIR or we'll miss events */
 		if (iir & I915_DISPLAY_PORT_INTERRUPT) {
 			u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
+			u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
 
 			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
 					 hotplug_status);
-			if (hotplug_status & HOTPLUG_INT_STATUS_I915)
+			if (hotplug_trigger) {
+				hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_status_i915);
 				queue_work(dev_priv->wq,
 					   &dev_priv->hotplug_work);
-
+			}
 			I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
 			I915_READ(PORT_HOTPLUG_STAT);
 		}
@@ -680,10 +716,12 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int pipe;
+	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
 
-	if (pch_iir & SDE_HOTPLUG_MASK)
+	if (hotplug_trigger) {
+		hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_ibx);
 		queue_work(dev_priv->wq, &dev_priv->hotplug_work);
-
+	}
 	if (pch_iir & SDE_AUDIO_POWER_MASK)
 		DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
 				 (pch_iir & SDE_AUDIO_POWER_MASK) >>
@@ -726,10 +764,12 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int pipe;
+	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
 
-	if (pch_iir & SDE_HOTPLUG_MASK_CPT)
+	if (hotplug_trigger) {
+		hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_cpt);
 		queue_work(dev_priv->wq, &dev_priv->hotplug_work);
-
+	}
 	if (pch_iir & SDE_AUDIO_POWER_MASK_CPT)
 		DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
 				 (pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
@@ -2607,13 +2647,15 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
 		if ((I915_HAS_HOTPLUG(dev)) &&
 		    (iir & I915_DISPLAY_PORT_INTERRUPT)) {
 			u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
+			u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
 
 			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
 				  hotplug_status);
-			if (hotplug_status & HOTPLUG_INT_STATUS_I915)
+			if (hotplug_trigger) {
+				hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_status_i915);
 				queue_work(dev_priv->wq,
 					   &dev_priv->hotplug_work);
-
+			}
 			I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
 			POSTING_READ(PORT_HOTPLUG_STAT);
 		}
@@ -2840,15 +2882,18 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 		/* Consume port.  Then clear IIR or we'll miss events */
 		if (iir & I915_DISPLAY_PORT_INTERRUPT) {
 			u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
+			u32 hotplug_trigger = hotplug_status & (IS_G4X(dev) ?
+								  HOTPLUG_INT_STATUS_G4X :
+								  HOTPLUG_INT_STATUS_I965);
 
 			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
 				  hotplug_status);
-			if (hotplug_status & (IS_G4X(dev) ?
-					      HOTPLUG_INT_STATUS_G4X :
-					      HOTPLUG_INT_STATUS_I965))
+			if (hotplug_trigger) {
+				hotplug_irq_storm_detect(dev, hotplug_trigger,
+							 IS_G4X(dev) ? hpd_status_gen4 : hpd_status_i965);
 				queue_work(dev_priv->wq,
 					   &dev_priv->hotplug_work);
-
+			}
 			I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
 			I915_READ(PORT_HOTPLUG_STAT);
 		}
-- 
1.8.1.4

  reply	other threads:[~2013-04-16 11:37 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-09  9:24 [PATCH v3 0/7] Add HPD interrupt storm detection Egbert Eich
2013-04-09  9:24 ` [PATCH v3 1/7] drm/i915: Add HPD IRQ storm detection (v4) Egbert Eich
2013-04-11  9:32   ` Jani Nikula
2013-04-11 10:46     ` Daniel Vetter
2013-04-16  9:50     ` Egbert Eich
2013-04-16 11:34     ` Egbert Eich
2013-04-16 11:36       ` Egbert Eich [this message]
2013-04-16 11:36         ` [PATCH 2/7] drm/i915: (re)init HPD interrupt storm statistics Egbert Eich
2013-04-16 11:36         ` [PATCH 3/7] drm/i915: Mask out the HPD irq bits before setting them individually Egbert Eich
2013-04-16 11:36         ` [PATCH 4/7] drm/i915: Disable HPD interrupt on pin when irq storm is detected (v3) Egbert Eich
2013-04-16 11:36         ` [PATCH 5/7] drm/i915: Add Reenable Timer to turn Hotplug Detection back on (v4) Egbert Eich
2013-04-16 18:07           ` Daniel Vetter
2013-04-16 20:22             ` Egbert Eich
2013-04-16 20:26               ` Daniel Vetter
2013-04-16 11:36         ` [PATCH 6/7] drm/i915: Add bit field to record which pins have received HPD events (v3) Egbert Eich
2013-04-16 11:37         ` [PATCH 7/7] drm/i915: Only reprobe display on encoder which has received an HPD event (v2) Egbert Eich
2013-04-09  9:24 ` [PATCH v3 2/7] drm/i915: (re)init HPD interrupt storm statistics Egbert Eich
2013-04-11  9:54   ` Jani Nikula
2013-04-09  9:24 ` [PATCH v3 3/7] drm/i915: Mask out the HPD irq bits before setting them individually Egbert Eich
2013-04-11  9:56   ` Jani Nikula
2013-04-09  9:24 ` [PATCH v3 4/7] drm/i915: Disable HPD interrupt on pin when irq storm is detected (v2) Egbert Eich
2013-04-11 10:13   ` Jani Nikula
2013-04-11 13:25     ` [PATCH v3] drm/i915: Disable HPD interrupt on pin when irq storm is detected (v3) Egbert Eich
2013-04-11 14:20       ` Jani Nikula
2013-04-09  9:24 ` [PATCH v3 5/7] drm/i915: Add Reenable Timer to turn Hotplug Detection back on (v3) Egbert Eich
2013-04-11 10:44   ` Jani Nikula
2013-04-11 13:10     ` Egbert Eich
2013-04-11 14:48       ` Jani Nikula
2013-04-11 13:28     ` [PATCH v4] drm/i915: Add Reenable Timer to turn Hotplug Detection back on (v4) Egbert Eich
2013-04-11 14:30       ` Jani Nikula
2013-04-09  9:24 ` [PATCH v3 6/7] drm/i915: Add bit field to record which pins have received HPD events (v2) Egbert Eich
2013-04-11 13:21   ` Jani Nikula
2013-04-11 13:34     ` Egbert Eich
2013-04-11 13:57     ` [PATCH v3] drm/i915: Add bit field to record which pins have received HPD events (v3) Egbert Eich
2013-04-11 14:03       ` [PATCH v3 Update] " Egbert Eich
2013-04-11 15:00         ` Jani Nikula
2013-04-09  9:24 ` [PATCH v3 7/7] drm/i915: Only reprobe display on encoder which has received an HPD event Egbert Eich
2013-04-11 13:35   ` Jani Nikula
     [not found] <Message-ID: <87wqs9nqbb.fsf@intel.com>
2013-04-11 14:00 ` [PATCH v2] drm/i915: Only reprobe display on encoder which has received an HPD event (v2) Egbert Eich
2013-04-11 15:06   ` Jani Nikula
2013-04-23 12:26     ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1366112220-7638-1-git-send-email-eich@suse.de \
    --to=eich@suse.de \
    --cc=daniel.vetter@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).