From: Daniel Vetter <daniel@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
"Sun, Yi" <yi.sun@intel.com>
Subject: Re: Updated -next
Date: Tue, 12 Jun 2012 10:37:51 +0200 [thread overview]
Message-ID: <20120612083751.GA5188@phenom.ffwll.local> (raw)
In-Reply-To: <20120604205914.GD29760@phenom.ffwll.local>
Hi Dave,
rc2 is out the door so I've figured I'll annoy you with the first -next
pull request for 3.6 already. Highlights:
- new wait_rendring_timeout interface (Ben)
- l3 cache remapping and error uevent support (Ben)
- even more infoframes work from Paulo
- gen4 hotplug rework from Chris
- prep work to make Laurent Pincharts original mode constification for
connector->mode_fixup possible
QA reported a few new bugs this time around, but no regressions afact. For
3.5 the only thing I'm aware of is the edp vdd dmesg spam Linus originally
reported - it looks like that might have been introduced in 3.5. But
somehow my brain is routinely offline when I work on that issue, so things
seem to take forever (and atm I'm at patch v4 for that little problem).
Yours, Daniel
The following changes since commit 63bc620b45af8c743ac291c8725933278c712692:
radeon: add radeon prime vmap support. (2012-05-31 14:14:01 +0100)
are available in the git repository at:
git://people.freedesktop.org/~danvet/drm-intel tags/drm-intel-next-2012-06-04
for you to fetch changes up to 1523c310b3ed964b71a8db16f70c3bc21cc0642e:
drm/i915: add min freq control to debugfs (2012-06-04 21:34:47 +0200)
----------------------------------------------------------------
Ben Widawsky (8):
drm/i915: timeout parameter for seqno wait
drm/i915: improve i915_wait_request_begin trace
drm/i915: wait render timeout ioctl
drm/i915: s/i915_wait_request/i915_wait_seqno/g
drm/i915: Dynamic Parity Detection handling
drm/i915: enable parity error interrupts
drm/i915: remap l3 on hw init
drm/i915: l3 parity sysfs interface
Chris Wilson (6):
drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq
drm/i915: Inspect the right status bits for DP/HDMI hotplug on gen4
drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4x
drm/i915/hdmi: Query the live connector status bit for G4x
drm/i915/dp: For consistency use the DP hotplug synonyms
drm/i915/hdmi: Fix reg values for g4x_hdmi_connected
Daniel Vetter (14):
drm/i915: clarify preferred sdvo input mode code
drm/i915: don't silently ignore sdvo mode_set failures
drm/i915: there's no cxsr on ilk
drm/i915: reuse the sdvo tv clock adjustment in ilk mode_set
drm/i915: s/mdelay/msleep/ in the sdvo detect function
drm/i915: ivybridge_handle_parity_error should be static
drm/i915: initialize the parity work only once
drm/i915: simplify sysfs setup code
Merge remote-tracking branch 'airlied/drm-prime-vmap' into drm-intel-next-queued
drm/i915: clarify IBX dp workaround
drm/i915: extract object active state flushing code
drm/i915: compute the target_clock for edp directly
drm/i915: adjusted_mode->clock in the dp mode_fixup
drm/i915: don't chnage the original mode in dp_mode_fixup
Jesse Barnes (1):
drm/i915: add min freq control to debugfs
Paulo Zanoni (11):
drm/i915: add set_infoframes to struct intel_hdmi
drm/i915: properly alternate between DVI and HDMI
drm/i915: only set the HDMI port on the DIP once
drm/i915: enable DIP before enabling each InfoFrame
drm/i915: don't wait for vblank while writing InfoFrames
drm/i915: explicitly disable the DIPs we're not using
drm/i915: disable DIP while changing the port
drm/i915: don't write 0 to DIP control at HDMI init
drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI
drm/i915: remove comment about HSW HDMI DIPs
drm/i915: add some barriers when changing DIPs
drivers/gpu/drm/i915/i915_debugfs.c | 66 +++++++
drivers/gpu/drm/i915/i915_dma.c | 1 +
drivers/gpu/drm/i915/i915_drv.h | 11 +-
drivers/gpu/drm/i915/i915_gem.c | 242 +++++++++++++++++++----
drivers/gpu/drm/i915/i915_irq.c | 171 ++++++++++++-----
drivers/gpu/drm/i915/i915_reg.h | 56 +++++-
drivers/gpu/drm/i915/i915_sysfs.c | 127 +++++++++++-
drivers/gpu/drm/i915/i915_trace.h | 28 ++-
drivers/gpu/drm/i915/intel_ddi.c | 3 +-
drivers/gpu/drm/i915/intel_display.c | 47 ++---
drivers/gpu/drm/i915/intel_dp.c | 53 +++---
drivers/gpu/drm/i915/intel_drv.h | 9 +-
drivers/gpu/drm/i915/intel_hdmi.c | 318 +++++++++++++++++++++++++------
drivers/gpu/drm/i915/intel_overlay.c | 4 +-
drivers/gpu/drm/i915/intel_panel.c | 2 +-
drivers/gpu/drm/i915/intel_ringbuffer.c | 16 +-
drivers/gpu/drm/i915/intel_sdvo.c | 56 ++++--
include/drm/i915_drm.h | 10 +
18 files changed, 965 insertions(+), 255 deletions(-)
--
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48
next prev parent reply other threads:[~2012-06-12 8:36 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-04 20:59 Updated -next Daniel Vetter
2012-06-12 8:37 ` Daniel Vetter [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-07-22 14:33 updated -next Daniel Vetter
2012-06-21 8:25 Updated -next Daniel Vetter
2012-05-06 19:09 Daniel Vetter
2012-04-21 16:40 Daniel Vetter
2012-04-23 7:39 ` Daniel Vetter
2012-04-23 7:40 ` Sun, Yi
2012-04-27 11:45 ` Daniel Vetter
2012-04-27 13:44 ` Daniel Vetter
2012-04-05 9:45 Daniel Vetter
2012-04-09 16:19 ` Daniel Vetter
2012-04-10 2:09 ` Sun, Yi
2012-04-11 3:20 ` Sun, Yi
2012-04-11 7:54 ` Paul Menzel
2012-04-11 8:24 ` Sun, Yi
2012-04-11 9:45 ` Paul Menzel
2012-03-23 10:03 Daniel Vetter
2012-03-29 7:38 ` Sun, Yi
2012-03-01 20:59 Daniel Vetter
2012-03-08 8:10 ` Sun, Yi
2012-03-18 21:20 ` Daniel Vetter
2012-02-16 17:27 updated -next Daniel Vetter
2012-02-17 17:56 ` Jesse Barnes
2012-02-21 7:45 ` Sun, Yi
2012-02-07 22:59 Daniel Vetter
2012-01-20 10:10 Updated -next Daniel Vetter
2012-01-21 4:15 ` Sun, Yi
2012-01-21 14:12 ` Daniel Vetter
2012-01-21 19:45 ` Alan W. Irwin
2012-01-31 9:07 ` Jin, Gordon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120612083751.GA5188@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=yi.sun@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).