intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH i-g-t v5 1/4] lib: add igt_dummyload
Date: Fri, 11 Nov 2016 17:16:52 +0100	[thread overview]
Message-ID: <20161111161652.yucobtlspgf3lulu@phenom.ffwll.local> (raw)
In-Reply-To: <1478886073-9479-2-git-send-email-abdiel.janulgue@linux.intel.com>

On Fri, Nov 11, 2016 at 07:41:10PM +0200, Abdiel Janulgue wrote:
> A lot of igt testcases need some GPU workload to make sure a race
> window is big enough. Unfortunately having a fixed amount of
> workload leads to spurious test failures or overtly long runtimes
> on some fast/slow platforms. This library contains functionality
> to submit GPU workloads that should consume exactly a specific
> amount of time.
> 
> v2 : Add recursive batch feature from Chris
> v3 : Drop auto-tuned stuff. Add bo dependecy to recursive batch
>      by adding a dummy reloc to the bo as suggested by Ville.
> v4:  Fix dependency reloc as write instead of read (Ville).
>      Fix wrong handling of batchbuffer start on ILK causing
>      test failure
> 
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
> ---
>  lib/Makefile.sources |   2 +
>  lib/igt.h            |   1 +
>  lib/igt_dummyload.c  | 276 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  lib/igt_dummyload.h  |  42 ++++++++

Did you check that your new docs do show up in the generated
documentation? Iirc you need to edit some xml under docs/.
-Daniel

>  4 files changed, 321 insertions(+)
>  create mode 100644 lib/igt_dummyload.c
>  create mode 100644 lib/igt_dummyload.h
> 
> diff --git a/lib/Makefile.sources b/lib/Makefile.sources
> index e8e277b..7fc5ec2 100644
> --- a/lib/Makefile.sources
> +++ b/lib/Makefile.sources
> @@ -75,6 +75,8 @@ lib_source_list =	 	\
>  	igt_draw.h		\
>  	igt_pm.c		\
>  	igt_pm.h		\
> +	igt_dummyload.c		\
> +	igt_dummyload.h		\
>  	uwildmat/uwildmat.h	\
>  	uwildmat/uwildmat.c	\
>  	$(NULL)
> diff --git a/lib/igt.h b/lib/igt.h
> index d751f24..a0028d5 100644
> --- a/lib/igt.h
> +++ b/lib/igt.h
> @@ -32,6 +32,7 @@
>  #include "igt_core.h"
>  #include "igt_debugfs.h"
>  #include "igt_draw.h"
> +#include "igt_dummyload.h"
>  #include "igt_fb.h"
>  #include "igt_gt.h"
>  #include "igt_kms.h"
> diff --git a/lib/igt_dummyload.c b/lib/igt_dummyload.c
> new file mode 100644
> index 0000000..b934fd5
> --- /dev/null
> +++ b/lib/igt_dummyload.c
> @@ -0,0 +1,276 @@
> +/*
> + * Copyright © 2016 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#include "igt.h"
> +#include "igt_dummyload.h"
> +#include <time.h>
> +#include <signal.h>
> +#include <sys/syscall.h>
> +
> +/**
> + * SECTION:igt_dummyload
> + * @short_description: Library for submitting GPU workloads
> + * @title: Dummyload
> + * @include: igt.h
> + *
> + * A lot of igt testcases need some GPU workload to make sure a race window is
> + * big enough. Unfortunately having a fixed amount of workload leads to
> + * spurious test failures or overtly long runtimes on some fast/slow platforms.
> + * This library contains functionality to submit GPU workloads that should
> + * consume exactly a specific amount of time.
> + */
> +
> +#define NSEC_PER_SEC 1000000000L
> +
> +#define gettid() syscall(__NR_gettid)
> +#define sigev_notify_thread_id _sigev_un._tid
> +
> +#define LOCAL_I915_EXEC_BSD_SHIFT      (13)
> +#define LOCAL_I915_EXEC_BSD_MASK       (3 << LOCAL_I915_EXEC_BSD_SHIFT)
> +
> +#define ENGINE_MASK  (I915_EXEC_RING_MASK | LOCAL_I915_EXEC_BSD_MASK)
> +
> +static void
> +fill_object(struct drm_i915_gem_exec_object2 *obj, uint32_t gem_handle,
> +	    struct drm_i915_gem_relocation_entry *relocs, uint32_t count)
> +{
> +	memset(obj, 0, sizeof(*obj));
> +	obj->handle = gem_handle;
> +	obj->relocation_count = count;
> +	obj->relocs_ptr = (uintptr_t)relocs;
> +}
> +
> +static void
> +fill_reloc(struct drm_i915_gem_relocation_entry *reloc,
> +	   uint32_t gem_handle, uint32_t offset,
> +	   uint32_t read_domains, uint32_t write_domains)
> +{
> +	reloc->target_handle = gem_handle;
> +	reloc->delta = 0;
> +	reloc->offset = offset * sizeof(uint32_t);
> +	reloc->presumed_offset = 0;
> +	reloc->read_domains = read_domains;
> +	reloc->write_domain = write_domains;
> +}
> +
> +
> +static uint32_t *batch;
> +
> +static uint32_t emit_recursive_batch(int fd, int engine, unsigned dep_handle)
> +{
> +	const int gen = intel_gen(intel_get_drm_devid(fd));
> +	struct drm_i915_gem_exec_object2 obj[2];
> +	struct drm_i915_gem_relocation_entry relocs[2];
> +	struct drm_i915_gem_execbuffer2 execbuf;
> +	unsigned engines[16];
> +	unsigned nengine, handle;
> +	int i = 0, reloc_count = 0, buf_count = 0;
> +
> +	buf_count = 0;
> +	nengine = 0;
> +	if (engine < 0) {
> +		for_each_engine(fd, engine)
> +			if (engine)
> +				engines[nengine++] = engine;
> +	} else {
> +		igt_require(gem_has_ring(fd, engine));
> +		engines[nengine++] = engine;
> +	}
> +	igt_require(nengine);
> +
> +	memset(&execbuf, 0, sizeof(execbuf));
> +	memset(obj, 0, sizeof(obj));
> +	memset(relocs, 0, sizeof(relocs));
> +
> +	execbuf.buffers_ptr = (uintptr_t) obj;
> +	handle = gem_create(fd, 4096);
> +	batch = gem_mmap__gtt(fd, handle, 4096, PROT_WRITE);
> +	gem_set_domain(fd, handle,
> +			I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
> +
> +	if (nengine == 1 && dep_handle > 0) {
> +		/* dummy write to dependency */
> +		fill_object(&obj[buf_count], dep_handle, NULL, 0);
> +		buf_count++;
> +
> +		fill_reloc(&relocs[reloc_count], dep_handle, i,
> +			   I915_GEM_DOMAIN_RENDER,
> +			   I915_GEM_DOMAIN_RENDER);
> +		batch[i++] = 0; /* reloc */
> +		reloc_count++;
> +		batch[i++] = MI_NOOP;
> +	}
> +
> +	if (gen >= 8) {
> +		batch[i++] = MI_BATCH_BUFFER_START | 1 << 8 | 1;
> +		/* recurse */
> +		fill_reloc(&relocs[reloc_count], handle, i,
> +			   I915_GEM_DOMAIN_COMMAND, 0);
> +		batch[i++] = 0;
> +		batch[i++] = 0;
> +	} else if (gen >= 6) {
> +		batch[i++] = MI_BATCH_BUFFER_START | 1 << 8;
> +		/* recurse */
> +		fill_reloc(&relocs[reloc_count], handle, i,
> +			   I915_GEM_DOMAIN_COMMAND, 0);
> +		batch[i++] = 0;
> +	} else {
> +		batch[i++] = MI_BATCH_BUFFER_START | 2 << 6 |
> +			((gen < 4) ? 1 : 0);
> +		/* recurse */
> +		fill_reloc(&relocs[reloc_count], handle, i,
> +			   I915_GEM_DOMAIN_COMMAND, 0);
> +		batch[i++] = 0;
> +		if (gen < 4)
> +			relocs[reloc_count].delta = 1;
> +	}
> +	reloc_count++;
> +
> +	fill_object(&obj[buf_count], handle, relocs, reloc_count);
> +	buf_count++;
> +
> +	for (i = 0; i < nengine; i++) {
> +		execbuf.flags &= ~ENGINE_MASK;
> +		execbuf.flags = engines[i];
> +		execbuf.buffer_count = buf_count;
> +		gem_execbuf(fd, &execbuf);
> +	}
> +
> +	return handle;
> +}
> +
> +static void sigiter(int sig, siginfo_t *info, void *arg)
> +{
> +	*batch = MI_BATCH_BUFFER_END;
> +	__sync_synchronize();
> +}
> +
> +static timer_t setup_batch_exit_timer(int64_t ns)
> +{
> +	timer_t timer;
> +	struct sigevent sev;
> +	struct sigaction act;
> +	struct itimerspec its;
> +
> +	memset(&sev, 0, sizeof(sev));
> +	sev.sigev_notify = SIGEV_SIGNAL | SIGEV_THREAD_ID;
> +	sev.sigev_notify_thread_id = gettid();
> +	sev.sigev_signo = SIGRTMIN + 1;
> +	igt_assert(timer_create(CLOCK_MONOTONIC, &sev, &timer) == 0);
> +	igt_assert(timer > 0);
> +
> +	memset(&act, 0, sizeof(act));
> +	act.sa_sigaction = sigiter;
> +	act.sa_flags = SA_SIGINFO;
> +	igt_assert(sigaction(SIGRTMIN + 1, &act, NULL) == 0);
> +
> +	memset(&its, 0, sizeof(its));
> +	its.it_value.tv_sec = ns / NSEC_PER_SEC;
> +	its.it_value.tv_nsec = ns % NSEC_PER_SEC;
> +	igt_assert(timer_settime(timer, 0, &its, NULL) == 0);
> +
> +	return timer;
> +}
> +
> +/**
> + * igt_spin_batch:
> + * @fd: open i915 drm file descriptor
> + * @ns: amount of time in nanoseconds the batch executes after terminating.
> + *      If value is less than 0, execute batch forever.
> + * @engine: Ring to execute batch OR'd with execbuf flags. If value is less
> + *          than 0, execute on all available rings.
> + * @dep_handle: handle to a buffer object dependency. If greater than 0, add a
> + *              relocation entry to this buffer within the batch.
> + *
> + * Start a recursive batch on a ring that terminates after an exact amount
> + * of time has elapsed. Immediately returns a #igt_spin_t that contains the
> + * batch's handle that can be waited upon. The returned structure must be passed to
> + * igt_post_spin_batch() for post-processing.
> + *
> + * Returns:
> + * Structure with helper internal state for igt_post_spin_batch().
> + */
> +igt_spin_t igt_spin_batch(int fd, int64_t ns, int engine, unsigned dep_handle)
> +{
> +	timer_t timer;
> +	uint32_t handle = emit_recursive_batch(fd, engine, dep_handle);
> +	int64_t wait_timeout = 0;
> +	igt_assert_eq(gem_wait(fd, handle, &wait_timeout), -ETIME);
> +
> +	if (ns < 1) {
> +		if (ns == 0) {
> +			*batch = MI_BATCH_BUFFER_END;
> +			__sync_synchronize();
> +			return (igt_spin_t){ handle, batch, 0};
> +		}
> +		return (igt_spin_t){ handle, batch, 0 };
> +	}
> +	timer = setup_batch_exit_timer(ns);
> +
> +	return (igt_spin_t){ handle, batch, timer };
> +}
> +
> +/**
> + * igt_post_spin_batch:
> + * @fd: open i915 drm file descriptor
> + * @arg: spin batch state from igt_spin_batch()
> + *
> + * This function does the necessary post-processing after starting a recursive
> + * batch with igt_spin_batch().
> + */
> +void igt_post_spin_batch(int fd, igt_spin_t arg)
> +{
> +	if (arg.handle == 0)
> +		return;
> +
> +	if (arg.timer > 0)
> +		timer_delete(arg.timer);
> +
> +	gem_close(fd, arg.handle);
> +	munmap(arg.batch, 4096);
> +}
> +
> +
> +/**
> + * igt_spin_batch_wait:
> + * @fd: open i915 drm file descriptor
> + * @ns: amount of time in nanoseconds the batch executes after terminating.
> + *      If value is less than 0, execute batch forever.
> + * @engine: ring to execute batch OR'd with execbuf flags. If value is less
> + *          than 0, execute on all available rings.
> + * @dep_handle: handle to a buffer object dependency. If greater than 0, include
> + *              this buffer on the wait dependency
> + *
> + * This is similar to igt_spin_batch(), but waits on the recursive batch to finish
> + * instead of returning right away. The function also does the necessary
> + * post-processing automatically if set to timeout.
> + */
> +void igt_spin_batch_wait(int fd, int64_t ns, int engine, unsigned dep_handle)
> +{
> +	igt_spin_t spin = igt_spin_batch(fd, ns, engine, dep_handle);
> +	int64_t wait_timeout = ns + (0.5 * NSEC_PER_SEC);
> +	igt_assert_eq(gem_wait(fd, spin.handle, &wait_timeout), 0);
> +
> +	igt_post_spin_batch(fd, spin);
> +}
> diff --git a/lib/igt_dummyload.h b/lib/igt_dummyload.h
> new file mode 100644
> index 0000000..79ead2c
> --- /dev/null
> +++ b/lib/igt_dummyload.h
> @@ -0,0 +1,42 @@
> +/*
> + * Copyright © 2016 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#ifndef __IGT_DUMMYLOAD_H__
> +#define __IGT_DUMMYLOAD_H__
> +
> +typedef struct igt_spin {
> +	unsigned handle;
> +	uint32_t *batch;
> +	timer_t timer;
> +} igt_spin_t;
> +
> +
> +igt_spin_t igt_spin_batch(int fd, int64_t ns, int engine, unsigned dep_handle);
> +
> +void igt_post_spin_batch(int fd, igt_spin_t arg);
> +
> +void igt_spin_batch_wait(int fd, int64_t ns, int engine, unsigned dep_handle);
> +
> +
> +#endif /* __IGT_DUMMYLOAD_H__ */
> -- 
> 2.7.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-11-11 16:16 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-11 17:41 i-g-t dummyload/spin batch v5 Abdiel Janulgue
2016-11-11 17:41 ` [PATCH i-g-t v5 1/4] lib: add igt_dummyload Abdiel Janulgue
2016-11-11 16:16   ` Daniel Vetter [this message]
2016-11-14 18:24     ` (no subject) Abdiel Janulgue
2016-11-14 18:24       ` [i-g-t PATCH v6 1/4] lib: add igt_dummyload Abdiel Janulgue
2016-11-15 10:59         ` Tomeu Vizoso
2016-11-15 11:08           ` Tomeu Vizoso
2016-11-15 14:21           ` Abdiel Janulgue
2016-11-14 18:24       ` [i-g-t PATCH v6 2/4] igt/gem_wait: Use new igt_spin_batch Abdiel Janulgue
2016-11-14 18:24       ` [i-g-t PATCH v6 3/4] igt/kms_flip: " Abdiel Janulgue
2016-11-14 18:24       ` [i-g-t PATCH v6 4/4] igt/kms_busy.c: " Abdiel Janulgue
2016-11-15  8:45         ` Tomeu Vizoso
2016-11-15 13:19           ` Abdiel Janulgue
2016-11-11 17:41 ` [PATCH i-g-t v5 2/4] igt/gem_wait: " Abdiel Janulgue
2016-11-11 17:41 ` [PATCH i-g-t v5 3/4] igt/kms_flip: " Abdiel Janulgue
2016-11-11 17:41 ` [PATCH i-g-t v5 4/4] igt/kms_busy.c: " Abdiel Janulgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161111161652.yucobtlspgf3lulu@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=abdiel.janulgue@linux.intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).