intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH] drm/i915: Force state->modeset=true when distrust_bios_wm==true
Date: Wed, 12 Feb 2020 17:01:02 +0200	[thread overview]
Message-ID: <20200212150102.7600-1-ville.syrjala@linux.intel.com> (raw)

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Currently when we load the driver we set distrust_bios_wm=true, which
will cause active_pipe_changes to get flagged even when we're not
toggling any pipes on/off. The reason being that we want to fully
redistribute the dbuf among the active pipes and ignore whatever
state the firmware left behind.

Unfortunately when the code flags active_pipe_changes it doesn't
set state->modeset to true, which means the hardware dbuf state
won't actually get updated. Hence the hardware and software
states go out of sync, which can result in planes trying to use a
disabled dbuf slice. Suprisingly that only seems to corrupt the
display rather than making the whole display engine keel over.

Let's fix this for now by flagging state->modeset whenever
distrust_bios_wm is set.

Eventually we'll likely want to rip out all of this mess and
introduce proper statye tracking for dbuf. But that requires
more work. Toss in a FIXME to that effect.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: ff2cd8635e41 ("drm/i915: Correctly map DBUF slices to pipes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 61ba1f2256a0..9e4f99ae81fb 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -15027,6 +15027,20 @@ static int intel_atomic_check(struct drm_device *dev,
 	if (new_cdclk_state && new_cdclk_state->force_min_cdclk_changed)
 		any_ms = true;
 
+	/*
+	 * distrust_bios_wm will force a full dbuf recomputation
+	 * but the hardware state will only get updated accordingly
+	 * if state->modeset==true. Hence distrust_bios_wm==true &&
+	 * state->modeset==false is an invalid combination which
+	 * would cause the hardware and software dbuf state to get
+	 * out of sync. We must prevent that.
+	 *
+	 * FIXME clean up this mess and introduce better
+	 * state tracking for dbuf.
+	 */
+	if (dev_priv->wm.distrust_bios_wm)
+		any_ms = true;
+
 	if (any_ms) {
 		ret = intel_modeset_checks(state);
 		if (ret)
-- 
2.24.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2020-02-12 15:01 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-12 15:01 Ville Syrjala [this message]
2020-02-12 15:20 ` [Intel-gfx] [PATCH] drm/i915: Force state->modeset=true when distrust_bios_wm==true Lisovskiy, Stanislav
2020-02-13  3:42 ` [Intel-gfx] ✓ Fi.CI.BAT: success for " Patchwork
2020-02-13 12:53 ` [Intel-gfx] [PATCH] " Jani Nikula
2020-02-16 11:58 ` [Intel-gfx] ✓ Fi.CI.IGT: success for " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200212150102.7600-1-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).