intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>, Ross Zwisler <zwisler@google.com>
Subject: [Intel-gfx] [PATCH v2] drm/i915/psr: Force PSR probe only after full initialization
Date: Fri, 14 Feb 2020 10:13:46 -0800	[thread overview]
Message-ID: <20200214181346.9957-1-jose.souza@intel.com> (raw)
In-Reply-To: <20200214015038.122913-1-jose.souza@intel.com>

Commit 60c6a14b489b ("drm/i915/display: Force the state compute phase
once to enable PSR") was forcing the state compute too earlier
causing errors because not everything was initialized, so here
moving to i915_driver_register() when everything is ready and driver
is registering into the rest of the system.

Also fixing the place where it disarm the force probe as during the
atomic check phase errors could happen like the ones due locking and
it would cause PSR to never be enabled if that happens.
Leaving the disarm to the atomic commit phase, intel_psr_enable() or
intel_psr_update() will be called even if the current state do not
allow PSR to be enabled.

v2: Check if intel_dp is null in intel_psr_force_mode_changed_set()

Fixes: 60c6a14b489b ("drm/i915/display: Force the state compute phase once to enable PSR")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151
Reported-by: Ross Zwisler <zwisler@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/display/intel_psr.c | 18 ++++++++++++++++--
 drivers/gpu/drm/i915/display/intel_psr.h |  1 +
 drivers/gpu/drm/i915/i915_drv.c          |  3 +++
 drivers/gpu/drm/i915/i915_drv.h          |  2 +-
 4 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index b4942b6445ae..35bafd281deb 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -936,6 +936,8 @@ void intel_psr_enable(struct intel_dp *intel_dp,
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 
+	intel_psr_force_mode_changed_set(intel_dp, false);
+
 	if (!crtc_state->has_psr)
 		return;
 
@@ -1096,6 +1098,8 @@ void intel_psr_update(struct intel_dp *intel_dp,
 	struct i915_psr *psr = &dev_priv->psr;
 	bool enable, psr2_enable;
 
+	intel_psr_force_mode_changed_set(intel_dp, false);
+
 	if (!CAN_PSR(dev_priv) || READ_ONCE(psr->dp) != intel_dp)
 		return;
 
@@ -1629,7 +1633,7 @@ void intel_psr_atomic_check(struct drm_connector *connector,
 	struct drm_crtc_state *crtc_state;
 
 	if (!CAN_PSR(dev_priv) || !new_state->crtc ||
-	    dev_priv->psr.initially_probed)
+	    !dev_priv->psr.force_mode_changed)
 		return;
 
 	intel_connector = to_intel_connector(connector);
@@ -1640,5 +1644,15 @@ void intel_psr_atomic_check(struct drm_connector *connector,
 	crtc_state = drm_atomic_get_new_crtc_state(new_state->state,
 						   new_state->crtc);
 	crtc_state->mode_changed = true;
-	dev_priv->psr.initially_probed = true;
+}
+
+void intel_psr_force_mode_changed_set(struct intel_dp *intel_dp, bool set)
+{
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+	if (!CAN_PSR(dev_priv) || !intel_dp || !intel_dp_is_edp(intel_dp) ||
+	    intel_dp != dev_priv->psr.dp)
+		return;
+
+	dev_priv->psr.force_mode_changed = set;
 }
diff --git a/drivers/gpu/drm/i915/display/intel_psr.h b/drivers/gpu/drm/i915/display/intel_psr.h
index c58a1d438808..27a70468e2b9 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.h
+++ b/drivers/gpu/drm/i915/display/intel_psr.h
@@ -40,5 +40,6 @@ bool intel_psr_enabled(struct intel_dp *intel_dp);
 void intel_psr_atomic_check(struct drm_connector *connector,
 			    struct drm_connector_state *old_state,
 			    struct drm_connector_state *new_state);
+void intel_psr_force_mode_changed_set(struct intel_dp *intel_dp, bool set);
 
 #endif /* __INTEL_PSR_H__ */
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 72826e36b165..31fbd034ff82 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -56,6 +56,7 @@
 #include "display/intel_hotplug.h"
 #include "display/intel_overlay.h"
 #include "display/intel_pipe_crc.h"
+#include "display/intel_psr.h"
 #include "display/intel_sprite.h"
 #include "display/intel_vga.h"
 
@@ -1348,6 +1349,8 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 
 	intel_audio_init(dev_priv);
 
+	intel_psr_force_mode_changed_set(dev_priv->psr.dp, true);
+
 	/*
 	 * Some ports require correctly set-up hpd registers for detection to
 	 * work properly (leading to ghost connected connector status), e.g. VGA
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index da509d9b8895..773f35015174 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -505,7 +505,7 @@ struct i915_psr {
 	bool dc3co_enabled;
 	u32 dc3co_exit_delay;
 	struct delayed_work dc3co_work;
-	bool initially_probed;
+	bool force_mode_changed;
 };
 
 #define QUIRK_LVDS_SSC_DISABLE (1<<1)
-- 
2.25.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-02-14 18:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-14  1:50 [Intel-gfx] [PATCH] drm/i915/psr: Force PSR probe only after full initialization José Roberto de Souza
2020-02-14  2:21 ` [Intel-gfx] ✗ Fi.CI.BAT: failure for " Patchwork
2020-02-14 18:13 ` José Roberto de Souza [this message]
2020-02-14 18:25   ` [Intel-gfx] [PATCH v2] " Ross Zwisler
2020-02-14 18:14 ` [Intel-gfx] [PATCH] " Ross Zwisler
2020-02-14 23:03 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915/psr: Force PSR probe only after full initialization (rev3) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214181346.9957-1-jose.souza@intel.com \
    --to=jose.souza@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=zwisler@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).