From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [PATCH v2 19/22] drm/i915/rkl: Add DPLL4 support
Date: Mon, 4 May 2020 15:52:24 -0700 [thread overview]
Message-ID: <20200504225227.464666-20-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20200504225227.464666-1-matthew.d.roper@intel.com>
Rocket Lake has a third DPLL (called 'DPLL4') that must be used to
enable a third display. Unlike EHL's variant of DPLL4, the RKL variant
behaves the same as DPLL0/1. And despite its name, the DPLL4 registers
are offset as if it were DPLL2, so no extra offset handling is needed
either.
Bspec: 49202
Bspec: 49443
Bspec: 50288
Bspec: 50289
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 28 +++++++++++++++++--
1 file changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index b45185b80bec..196d9eb3a77b 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3506,13 +3506,19 @@ static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
return false;
}
- if (IS_ELKHARTLAKE(dev_priv) && port != PORT_A)
+ if (IS_ROCKETLAKE(dev_priv)) {
dpll_mask =
BIT(DPLL_ID_EHL_DPLL4) |
BIT(DPLL_ID_ICL_DPLL1) |
BIT(DPLL_ID_ICL_DPLL0);
- else
+ } else if (IS_ELKHARTLAKE(dev_priv) && port != PORT_A) {
+ dpll_mask =
+ BIT(DPLL_ID_EHL_DPLL4) |
+ BIT(DPLL_ID_ICL_DPLL1) |
+ BIT(DPLL_ID_ICL_DPLL0);
+ } else {
dpll_mask = BIT(DPLL_ID_ICL_DPLL1) | BIT(DPLL_ID_ICL_DPLL0);
+ }
port_dpll->pll = intel_find_shared_dpll(state, crtc,
&port_dpll->hw_state,
@@ -4275,6 +4281,20 @@ static const struct intel_dpll_mgr tgl_pll_mgr = {
.dump_hw_state = icl_dump_hw_state,
};
+static const struct dpll_info rkl_plls[] = {
+ { "DPLL 0", &combo_pll_funcs, DPLL_ID_ICL_DPLL0, 0 },
+ { "DPLL 1", &combo_pll_funcs, DPLL_ID_ICL_DPLL1, 0 },
+ { "DPLL 4", &combo_pll_funcs, DPLL_ID_EHL_DPLL4, 0 },
+ { },
+};
+
+static const struct intel_dpll_mgr rkl_pll_mgr = {
+ .dpll_info = rkl_plls,
+ .get_dplls = icl_get_dplls,
+ .put_dplls = icl_put_dplls,
+ .dump_hw_state = icl_dump_hw_state,
+};
+
/**
* intel_shared_dpll_init - Initialize shared DPLLs
* @dev: drm device
@@ -4288,7 +4308,9 @@ void intel_shared_dpll_init(struct drm_device *dev)
const struct dpll_info *dpll_info;
int i;
- if (INTEL_GEN(dev_priv) >= 12)
+ if (IS_ROCKETLAKE(dev_priv))
+ dpll_mgr = &rkl_pll_mgr;
+ else if (INTEL_GEN(dev_priv) >= 12)
dpll_mgr = &tgl_pll_mgr;
else if (IS_ELKHARTLAKE(dev_priv))
dpll_mgr = &ehl_pll_mgr;
--
2.24.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-05-04 22:53 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-04 22:52 [Intel-gfx] [PATCH v2 00/22] Introduce Rocket Lake Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 01/22] drm/i915/rkl: Add RKL platform info and PCI ids Matt Roper
2020-05-07 11:18 ` Srivatsa, Anusha
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 02/22] x86/gpu: add RKL stolen memory support Matt Roper
2020-05-06 11:51 ` Srivatsa, Anusha
2020-05-19 23:57 ` Lucas De Marchi
2020-05-20 9:30 ` Borislav Petkov
2020-05-20 17:49 ` Lucas De Marchi
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 03/22] drm/i915/rkl: Re-use TGL GuC/HuC firmware Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 04/22] drm/i915/rkl: Load DMC firmware for Rocket Lake Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 05/22] drm/i915/rkl: Add PCH support Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 06/22] drm/i915/rkl: Update memory bandwidth parameters Matt Roper
2020-05-07 12:24 ` Ville Syrjälä
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 07/22] drm/i915/rkl: Limit number of universal planes to 5 Matt Roper
2020-05-07 12:10 ` Ville Syrjälä
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 08/22] drm/i915/rkl: Add power well support Matt Roper
2020-05-05 4:50 ` Anshuman Gupta
2020-05-05 14:39 ` Matt Roper
2020-05-05 16:09 ` Imre Deak
2020-05-06 12:13 ` Anshuman Gupta
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 09/22] drm/i915/rkl: Program BW_BUDDY0 registers instead of BW_BUDDY1/2 Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 10/22] drm/i915/rkl: RKL only uses PHY_MISC for PHY's A and B Matt Roper
2020-05-06 13:49 ` Srivatsa, Anusha
2020-05-06 16:49 ` Matt Roper
2020-05-07 11:22 ` Srivatsa, Anusha
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 11/22] drm/i915/rkl: Handle new DPCLKA_CFGCR0 layout Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 12/22] drm/i915/rkl: Check proper SDEISR bits for TC1 and TC2 outputs Matt Roper
2020-05-07 11:38 ` Srivatsa, Anusha
2020-05-07 11:59 ` Ville Syrjälä
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 13/22] drm/i915/rkl: Setup ports/phys Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 14/22] drm/i915/rkl: provide port/phy mapping for vbt Matt Roper
2020-05-07 12:04 ` Ville Syrjälä
2020-05-07 18:05 ` Matt Roper
2020-05-08 9:44 ` Ville Syrjälä
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 15/22] drm/i915/rkl: Add DDC pin mapping Matt Roper
2020-05-06 9:19 ` Srivatsa, Anusha
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 16/22] drm/i915/rkl: Don't try to access transcoder D Matt Roper
2020-05-06 20:34 ` Matt Roper
2020-05-06 21:21 ` [Intel-gfx] [PATCH v3 " Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 17/22] drm/i915/rkl: Don't try to read out DSI transcoders Matt Roper
2020-05-07 11:58 ` Ville Syrjälä
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 18/22] drm/i915/rkl: Handle comp master/slave relationships for PHYs Matt Roper
2020-05-06 9:20 ` Srivatsa, Anusha
2020-05-04 22:52 ` Matt Roper [this message]
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 20/22] drm/i915/rkl: Handle HTI Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 21/22] drm/i915/rkl: Disable PSR2 Matt Roper
2020-05-04 22:52 ` [Intel-gfx] [PATCH v2 22/22] drm/i915/rkl: Add initial workarounds Matt Roper
2020-05-04 23:10 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce Rocket Lake (rev4) Patchwork
2020-05-04 23:33 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-05-05 13:35 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-05-06 22:31 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce Rocket Lake (rev5) Patchwork
2020-05-06 22:55 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-05-07 2:12 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200504225227.464666-20-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lucas.demarchi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).