From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v6 02/11] drm/i915: Remove hw.mode
Date: Wed, 15 Jul 2020 15:42:13 -0700 [thread overview]
Message-ID: <20200715224222.7557-2-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20200715224222.7557-1-manasi.d.navare@intel.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The members in hw.mode can be used from adjusted_mode as well,
use that when available.
Some places that use hw.mode can be converted to use adjusted_mode
as well.
v2:
* Manual rebase (Manasi)
* remove the use of pipe_mode defined in patch 3 (Manasi)
v3:
* Rebase on drm-tip (Manasi)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 29 ++++++++++---------
.../drm/i915/display/intel_display_types.h | 2 +-
drivers/gpu/drm/i915/display/intel_dvo.c | 2 +-
drivers/gpu/drm/i915/display/intel_sdvo.c | 16 ++++------
4 files changed, 23 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 729ec6e0d43a..8652a7c6bf11 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -8892,9 +8892,6 @@ static void intel_get_pipe_src_size(struct intel_crtc *crtc,
tmp = intel_de_read(dev_priv, PIPESRC(crtc->pipe));
pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
-
- pipe_config->hw.mode.vdisplay = pipe_config->pipe_src_h;
- pipe_config->hw.mode.hdisplay = pipe_config->pipe_src_w;
}
void intel_mode_from_pipe_config(struct drm_display_mode *mode,
@@ -13079,7 +13076,7 @@ static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config,
intel_dump_dp_vsc_sdp(dev_priv, &pipe_config->infoframes.vsc);
drm_dbg_kms(&dev_priv->drm, "requested mode:\n");
- drm_mode_debug_printmodeline(&pipe_config->hw.mode);
+ drm_mode_debug_printmodeline(&pipe_config->uapi.mode);
drm_dbg_kms(&dev_priv->drm, "adjusted mode:\n");
drm_mode_debug_printmodeline(&pipe_config->hw.adjusted_mode);
intel_dump_crtc_timings(dev_priv, &pipe_config->hw.adjusted_mode);
@@ -13221,17 +13218,17 @@ intel_crtc_copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)
{
crtc_state->hw.enable = crtc_state->uapi.enable;
crtc_state->hw.active = crtc_state->uapi.active;
- crtc_state->hw.mode = crtc_state->uapi.mode;
crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode;
intel_crtc_copy_uapi_to_hw_state_nomodeset(crtc_state);
}
-static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state)
+static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state,
+ struct drm_display_mode *user_mode)
{
crtc_state->uapi.enable = crtc_state->hw.enable;
crtc_state->uapi.active = crtc_state->hw.active;
drm_WARN_ON(crtc_state->uapi.crtc->dev,
- drm_atomic_set_mode_for_crtc(&crtc_state->uapi, &crtc_state->hw.mode) < 0);
+ drm_atomic_set_mode_for_crtc(&crtc_state->uapi, user_mode) < 0);
crtc_state->uapi.adjusted_mode = crtc_state->hw.adjusted_mode;
@@ -13277,6 +13274,10 @@ intel_crtc_prepare_cleared_state(struct intel_crtc_state *crtc_state)
memcpy(crtc_state, saved_state, sizeof(*crtc_state));
kfree(saved_state);
+ /* Clear I915_MODE_FLAG_INHERITED */
+ crtc_state->uapi.mode.private_flags = 0;
+ crtc_state->uapi.adjusted_mode.private_flags = 0;
+
intel_crtc_copy_uapi_to_hw_state(crtc_state);
return 0;
@@ -13324,7 +13325,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
* computation to clearly distinguish it from the adjusted mode, which
* can be changed by the connectors in the below retry loop.
*/
- drm_mode_get_hv_timing(&pipe_config->hw.mode,
+ drm_mode_get_hv_timing(&pipe_config->hw.adjusted_mode,
&pipe_config->pipe_src_w,
&pipe_config->pipe_src_h);
@@ -18461,15 +18462,11 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
int min_cdclk = 0;
if (crtc_state->hw.active) {
- struct drm_display_mode *mode = &crtc_state->hw.mode;
+ struct drm_display_mode mode;
intel_mode_from_pipe_config(&crtc_state->hw.adjusted_mode,
crtc_state);
- *mode = crtc_state->hw.adjusted_mode;
- mode->hdisplay = crtc_state->pipe_src_w;
- mode->vdisplay = crtc_state->pipe_src_h;
-
/*
* The initial mode needs to be set in order to keep
* the atomic core happy. It wants a valid mode if the
@@ -18481,11 +18478,15 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
*/
crtc_state->inherited = true;
+ mode = crtc_state->hw.adjusted_mode;
+ mode.hdisplay = crtc_state->pipe_src_w;
+ mode.vdisplay = crtc_state->pipe_src_h;
+
intel_crtc_compute_pixel_rate(crtc_state);
intel_crtc_update_active_timings(crtc_state);
- intel_crtc_copy_hw_to_uapi_state(crtc_state);
+ intel_crtc_copy_hw_to_uapi_state(crtc_state, &mode);
}
for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index e8f809161c75..f1e29d9a75d0 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -807,7 +807,7 @@ struct intel_crtc_state {
struct {
bool active, enable;
struct drm_property_blob *degamma_lut, *gamma_lut, *ctm;
- struct drm_display_mode mode, adjusted_mode;
+ struct drm_display_mode adjusted_mode;
} hw;
/**
diff --git a/drivers/gpu/drm/i915/display/intel_dvo.c b/drivers/gpu/drm/i915/display/intel_dvo.c
index 307ed8ae9a19..0b9bf1fec0f4 100644
--- a/drivers/gpu/drm/i915/display/intel_dvo.c
+++ b/drivers/gpu/drm/i915/display/intel_dvo.c
@@ -209,7 +209,7 @@ static void intel_enable_dvo(struct intel_atomic_state *state,
u32 temp = intel_de_read(dev_priv, dvo_reg);
intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
- &pipe_config->hw.mode,
+ &pipe_config->hw.adjusted_mode,
&pipe_config->hw.adjusted_mode);
intel_de_write(dev_priv, dvo_reg, temp | DVO_ENABLE);
diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
index 2da4388e1540..8b78ae0c39a0 100644
--- a/drivers/gpu/drm/i915/display/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
@@ -1223,7 +1223,6 @@ intel_sdvo_set_output_timings_from_mode(struct intel_sdvo *intel_sdvo,
static bool
intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo,
struct intel_sdvo_connector *intel_sdvo_connector,
- const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct intel_sdvo_dtd input_dtd;
@@ -1234,9 +1233,9 @@ intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo,
if (!intel_sdvo_create_preferred_input_timing(intel_sdvo,
intel_sdvo_connector,
- mode->clock / 10,
- mode->hdisplay,
- mode->vdisplay))
+ adjusted_mode->clock / 10,
+ adjusted_mode->hdisplay,
+ adjusted_mode->vdisplay))
return false;
if (!intel_sdvo_get_preferred_input_timing(intel_sdvo,
@@ -1308,7 +1307,6 @@ static int intel_sdvo_compute_config(struct intel_encoder *encoder,
struct intel_sdvo_connector *intel_sdvo_connector =
to_intel_sdvo_connector(conn_state->connector);
struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
- struct drm_display_mode *mode = &pipe_config->hw.mode;
DRM_DEBUG_KMS("forcing bpc to 8 for SDVO\n");
pipe_config->pipe_bpp = 8*3;
@@ -1324,12 +1322,12 @@ static int intel_sdvo_compute_config(struct intel_encoder *encoder,
* the sequence to do it. Oh well.
*/
if (IS_TV(intel_sdvo_connector)) {
- if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo, mode))
+ if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo,
+ adjusted_mode))
return -EINVAL;
(void) intel_sdvo_get_preferred_input_mode(intel_sdvo,
intel_sdvo_connector,
- mode,
adjusted_mode);
pipe_config->sdvo_tv_clock = true;
} else if (IS_LVDS(intel_sdvo_connector)) {
@@ -1339,7 +1337,6 @@ static int intel_sdvo_compute_config(struct intel_encoder *encoder,
(void) intel_sdvo_get_preferred_input_mode(intel_sdvo,
intel_sdvo_connector,
- mode,
adjusted_mode);
}
@@ -1458,7 +1455,6 @@ static void intel_sdvo_pre_enable(struct intel_atomic_state *state,
to_intel_sdvo_connector_state(conn_state);
const struct intel_sdvo_connector *intel_sdvo_connector =
to_intel_sdvo_connector(conn_state->connector);
- const struct drm_display_mode *mode = &crtc_state->hw.mode;
struct intel_sdvo *intel_sdvo = to_sdvo(intel_encoder);
u32 sdvox;
struct intel_sdvo_in_out_map in_out;
@@ -1491,7 +1487,7 @@ static void intel_sdvo_pre_enable(struct intel_atomic_state *state,
intel_sdvo_get_dtd_from_mode(&output_dtd,
intel_sdvo_connector->base.panel.fixed_mode);
else
- intel_sdvo_get_dtd_from_mode(&output_dtd, mode);
+ intel_sdvo_get_dtd_from_mode(&output_dtd, adjusted_mode);
if (!intel_sdvo_set_output_timing(intel_sdvo, &output_dtd))
drm_info(&dev_priv->drm,
"Setting output timings on %s failed\n",
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-07-15 22:40 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 22:42 [Intel-gfx] [PATCH v6 01/11] HAX to make DSC work on the icelake test system Manasi Navare
2020-07-15 22:42 ` Manasi Navare [this message]
2020-08-17 7:26 ` [Intel-gfx] [PATCH v6 02/11] drm/i915: Remove hw.mode Manna, Animesh
2020-09-03 17:49 ` Ville Syrjälä
2020-09-03 18:04 ` Navare, Manasi
2020-09-03 18:40 ` Ville Syrjälä
2020-09-07 12:35 ` Ville Syrjälä
2020-09-14 18:32 ` Navare, Manasi
2020-09-14 18:52 ` Ville Syrjälä
2020-09-21 21:01 ` Navare, Manasi
2020-09-22 10:19 ` Ville Syrjälä
2020-09-22 18:52 ` Navare, Manasi
2020-09-23 14:54 ` Navare, Manasi
2020-07-15 22:42 ` [Intel-gfx] [PATCH v6 03/11] drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder split Manasi Navare
2020-08-10 12:38 ` Maarten Lankhorst
2020-08-17 7:32 ` Manna, Animesh
2020-09-03 17:54 ` Ville Syrjälä
2020-09-14 18:45 ` Navare, Manasi
2020-09-14 18:48 ` Ville Syrjälä
2020-07-15 22:42 ` [Intel-gfx] [PATCH v6 04/11] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3 Manasi Navare
2020-08-10 12:40 ` Maarten Lankhorst
2020-08-21 9:41 ` Manna, Animesh
2020-08-21 21:51 ` Navare, Manasi
2020-09-07 11:20 ` Ville Syrjälä
2020-09-14 19:00 ` Navare, Manasi
2020-09-14 19:17 ` Ville Syrjälä
2020-09-14 19:38 ` Navare, Manasi
2020-09-14 19:47 ` Ville Syrjälä
2020-09-15 23:03 ` Navare, Manasi
2020-09-17 12:20 ` Ville Syrjälä
2020-09-23 5:46 ` Navare, Manasi
2020-09-23 9:57 ` Ville Syrjälä
2020-07-15 22:42 ` [Intel-gfx] [PATCH v6 05/11] drm/i915: Try to make bigjoiner work in atomic check Manasi Navare
2020-08-21 10:16 ` Manna, Animesh
2020-08-21 18:22 ` Navare, Manasi
2020-09-03 18:38 ` Ville Syrjälä
2020-09-23 22:58 ` Navare, Manasi
2020-07-15 22:42 ` [Intel-gfx] [PATCH v6 06/11] drm/i915: Enable big joiner support in enable and disable sequences Manasi Navare
2020-07-16 19:27 ` Manasi Navare
2020-08-10 12:45 ` Maarten Lankhorst
2020-08-10 23:04 ` Navare, Manasi
2020-07-16 21:12 ` [Intel-gfx] [PATCH v7 " Manasi Navare
2020-08-10 23:28 ` [Intel-gfx] [PATCH v8 " Manasi Navare
2020-08-27 23:35 ` Navare, Manasi
2020-08-28 6:26 ` Maarten Lankhorst
2020-07-15 22:42 ` [Intel-gfx] [PATCH v6 07/11] drm/i915: Make hardware readout work on i915 Manasi Navare
2020-07-15 22:42 ` [Intel-gfx] [PATCH v6 08/11] drm/i915: Link planes in a bigjoiner configuration, v3 Manasi Navare
2020-09-03 19:19 ` Ville Syrjälä
2020-09-14 19:14 ` Navare, Manasi
2020-09-14 19:20 ` Ville Syrjälä
2020-09-14 19:27 ` Navare, Manasi
2020-09-14 19:34 ` Ville Syrjälä
2020-09-14 19:45 ` Navare, Manasi
2020-09-14 20:05 ` Ville Syrjälä
2020-09-15 22:40 ` Navare, Manasi
2020-07-15 22:42 ` [Intel-gfx] [PATCH v6 09/11] drm/i915: Add bigjoiner aware plane clipping checks Manasi Navare
2020-07-15 22:42 ` [Intel-gfx] [PATCH v6 10/11] drm/i915: Add intel_update_bigjoiner handling Manasi Navare
2020-08-24 22:15 ` Navare, Manasi
2020-09-03 19:23 ` Ville Syrjälä
2020-09-14 19:21 ` Navare, Manasi
2020-09-21 21:18 ` Navare, Manasi
2020-09-22 10:27 ` Ville Syrjälä
2020-09-22 18:54 ` Navare, Manasi
2020-07-15 22:42 ` [Intel-gfx] [PATCH v6 11/11] drm/i915: Add debugfs dumping for bigjoiner, v3 Manasi Navare
2020-08-10 12:47 ` Maarten Lankhorst
2020-07-15 22:50 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [v6,01/11] HAX to make DSC work on the icelake test system Patchwork
2020-07-15 22:51 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-07-15 23:12 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-07-16 5:48 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-07-16 21:53 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [v6,01/11] HAX to make DSC work on the icelake test system (rev2) Patchwork
2020-07-16 21:54 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-07-16 22:14 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-07-17 1:04 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-08-10 23:47 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [v6,01/11] HAX to make DSC work on the icelake test system (rev3) Patchwork
2020-08-10 23:48 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-08-11 0:09 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2020-08-11 18:33 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [v6,01/11] HAX to make DSC work on the icelake test system (rev4) Patchwork
2020-08-11 18:35 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-08-11 18:56 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-08-11 20:15 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200715224222.7557-2-manasi.d.navare@intel.com \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).