Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Chris Wilson <chris@chris-wilson.co.uk>
To: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Subject: [Intel-gfx] [PATCH 2/4] drm/i915/gt: Lift stop_ring() to reset_prepare
Date: Fri, 15 Jan 2021 08:19:06 +0000
Message-ID: <20210115081908.29494-2-chris@chris-wilson.co.uk> (raw)
In-Reply-To: <20210115081908.29494-1-chris@chris-wilson.co.uk>

Push the sleeping stop_ring() out of the reset resume function to reset
prepare; we are not allowed to sleep in the former.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 .../gpu/drm/i915/gt/intel_ring_submission.c   | 97 +++++++------------
 1 file changed, 36 insertions(+), 61 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_ring_submission.c b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
index 8d0964d2d597..44159595d909 100644
--- a/drivers/gpu/drm/i915/gt/intel_ring_submission.c
+++ b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
@@ -157,21 +157,6 @@ static void ring_setup_status_page(struct intel_engine_cs *engine)
 	flush_cs_tlb(engine);
 }
 
-static bool stop_ring(struct intel_engine_cs *engine)
-{
-	intel_engine_stop_cs(engine);
-
-	ENGINE_WRITE(engine, RING_HEAD, ENGINE_READ(engine, RING_TAIL));
-
-	ENGINE_WRITE(engine, RING_HEAD, 0);
-	ENGINE_WRITE(engine, RING_TAIL, 0);
-
-	/* The ring must be empty before it is disabled */
-	ENGINE_WRITE(engine, RING_CTL, 0);
-
-	return (ENGINE_READ(engine, RING_HEAD) & HEAD_ADDR) == 0;
-}
-
 static struct i915_address_space *vm_alias(struct i915_address_space *vm)
 {
 	if (i915_is_ggtt(vm))
@@ -213,31 +198,6 @@ static int xcs_resume(struct intel_engine_cs *engine)
 
 	intel_uncore_forcewake_get(engine->uncore, FORCEWAKE_ALL);
 
-	/* WaClearRingBufHeadRegAtInit:ctg,elk */
-	if (!stop_ring(engine)) {
-		/* G45 ring initialization often fails to reset head to zero */
-		drm_dbg(&dev_priv->drm, "%s head not reset to zero "
-			"ctl %08x head %08x tail %08x start %08x\n",
-			engine->name,
-			ENGINE_READ(engine, RING_CTL),
-			ENGINE_READ(engine, RING_HEAD),
-			ENGINE_READ(engine, RING_TAIL),
-			ENGINE_READ(engine, RING_START));
-
-		if (!stop_ring(engine)) {
-			drm_err(&dev_priv->drm,
-				"failed to set %s head to zero "
-				"ctl %08x head %08x tail %08x start %08x\n",
-				engine->name,
-				ENGINE_READ(engine, RING_CTL),
-				ENGINE_READ(engine, RING_HEAD),
-				ENGINE_READ(engine, RING_TAIL),
-				ENGINE_READ(engine, RING_START));
-			ret = -EIO;
-			goto out;
-		}
-	}
-
 	if (HWS_NEEDS_PHYSICAL(dev_priv))
 		ring_setup_phys_status_page(engine);
 	else
@@ -339,11 +299,21 @@ static void xcs_sanitize(struct intel_engine_cs *engine)
 	clflush_cache_range(engine->status_page.addr, PAGE_SIZE);
 }
 
+static bool stop_ring(struct intel_engine_cs *engine)
+{
+	ENGINE_WRITE_FW(engine, RING_HEAD, ENGINE_READ_FW(engine, RING_TAIL));
+
+	ENGINE_WRITE_FW(engine, RING_HEAD, 0);
+	ENGINE_WRITE_FW(engine, RING_TAIL, 0);
+
+	/* The ring must be empty before it is disabled */
+	ENGINE_WRITE_FW(engine, RING_CTL, 0);
+
+	return (ENGINE_READ_FW(engine, RING_HEAD) & HEAD_ADDR) == 0;
+}
+
 static void reset_prepare(struct intel_engine_cs *engine)
 {
-	struct intel_uncore *uncore = engine->uncore;
-	const u32 base = engine->mmio_base;
-
 	/*
 	 * We stop engines, otherwise we might get failed reset and a
 	 * dead gpu (on elk). Also as modern gpu as kbl can suffer
@@ -355,30 +325,35 @@ static void reset_prepare(struct intel_engine_cs *engine)
 	 * WaKBLVECSSemaphoreWaitPoll:kbl (on ALL_ENGINES)
 	 *
 	 * WaMediaResetMainRingCleanup:ctg,elk (presumably)
+	 * WaClearRingBufHeadRegAtInit:ctg,elk
 	 *
 	 * FIXME: Wa for more modern gens needs to be validated
 	 */
 	ENGINE_TRACE(engine, "\n");
+	intel_engine_stop_cs(engine);
 
-	if (intel_engine_stop_cs(engine))
-		ENGINE_TRACE(engine, "timed out on STOP_RING\n");
+	if (!stop_ring(engine)) {
+		/* G45 ring initialization often fails to reset head to zero */
+		drm_dbg(&engine->i915->drm,
+			"%s head not reset to zero "
+			"ctl %08x head %08x tail %08x start %08x\n",
+			engine->name,
+			ENGINE_READ_FW(engine, RING_CTL),
+			ENGINE_READ_FW(engine, RING_HEAD),
+			ENGINE_READ_FW(engine, RING_TAIL),
+			ENGINE_READ_FW(engine, RING_START));
+	}
 
-	intel_uncore_write_fw(uncore,
-			      RING_HEAD(base),
-			      intel_uncore_read_fw(uncore, RING_TAIL(base)));
-	intel_uncore_posting_read_fw(uncore, RING_HEAD(base)); /* paranoia */
-
-	intel_uncore_write_fw(uncore, RING_HEAD(base), 0);
-	intel_uncore_write_fw(uncore, RING_TAIL(base), 0);
-	intel_uncore_posting_read_fw(uncore, RING_TAIL(base));
-
-	/* The ring must be empty before it is disabled */
-	intel_uncore_write_fw(uncore, RING_CTL(base), 0);
-
-	/* Check acts as a post */
-	if (intel_uncore_read_fw(uncore, RING_HEAD(base)))
-		ENGINE_TRACE(engine, "ring head [%x] not parked\n",
-			     intel_uncore_read_fw(uncore, RING_HEAD(base)));
+	if (!stop_ring(engine)) {
+		drm_err(&engine->i915->drm,
+			"failed to set %s head to zero "
+			"ctl %08x head %08x tail %08x start %08x\n",
+			engine->name,
+			ENGINE_READ_FW(engine, RING_CTL),
+			ENGINE_READ_FW(engine, RING_HEAD),
+			ENGINE_READ_FW(engine, RING_TAIL),
+			ENGINE_READ_FW(engine, RING_START));
+	}
 }
 
 static void reset_rewind(struct intel_engine_cs *engine, bool stalled)
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <mika.kuoppala@linux.intel.com>
2021-01-15  8:19 ` [Intel-gfx] [PATCH 1/4] drm/i915/selftests: Prepare the selftests for engine resets with ring submission Chris Wilson
2021-01-15  8:19   ` Chris Wilson [this message]
2021-01-15  8:19   ` [Intel-gfx] [PATCH 3/4] drm/i915/gt: Pull ring submission resume under its caller forcewake Chris Wilson
2021-01-15  8:19   ` [Intel-gfx] [PATCH 4/4] drm/i915: Mark per-engine-reset as supported on gen7 Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210115081908.29494-2-chris@chris-wilson.co.uk \
    --to=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git