Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 3/6] drm/i915: don't save/restor ADPA for kms
Date: Wed, 17 Oct 2012 18:49:00 -0300
Message-ID: <CA+gsUGR3cnTgUtYBRcr1Scj4f5Gaz0rn_HNb=Tckb4qw6Viuvg@mail.gmail.com> (raw)
In-Reply-To: <1349978908-7687-4-git-send-email-daniel.vetter@ffwll.ch>

Hi

2012/10/11 Daniel Vetter <daniel.vetter@ffwll.ch>:
> We now no longer rely on this.
>
> This is step 1 on a long journey to rid us of the save/restore
> madness, which tends to lightly paper over many issues, and cause
> tons of bad things itself ...
>
> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> ---
>  drivers/gpu/drm/i915/i915_suspend.c | 26 +++++++++++++-------------
>  1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
> index 4776ccf..6e398a8 100644
> --- a/drivers/gpu/drm/i915/i915_suspend.c
> +++ b/drivers/gpu/drm/i915/i915_suspend.c
> @@ -395,6 +395,13 @@ static void i915_save_modeset_reg(struct drm_device *dev)
>                 break;
>         }
>
> +       /* CRT state */
> +       if (HAS_PCH_SPLIT(dev)) {
> +               dev_priv->saveADPA = I915_READ(PCH_ADPA);
> +       } else {
> +               dev_priv->saveADPA = I915_READ(ADPA);
> +       }
> +

My OCD is telling me to ask you to remove '}' and '{' here (yes, I
know, they're here because of copy/paste).

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

>         return;
>  }
>
> @@ -601,6 +608,12 @@ static void i915_restore_modeset_reg(struct drm_device *dev)
>         if (IS_GEN2(dev))
>                 I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
>
> +       /* CRT state */
> +       if (HAS_PCH_SPLIT(dev))
> +               I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
> +       else
> +               I915_WRITE(ADPA, dev_priv->saveADPA);
> +
>         return;
>  }
>
> @@ -615,13 +628,6 @@ static void i915_save_display(struct drm_device *dev)
>         /* Don't save them in KMS mode */
>         i915_save_modeset_reg(dev);
>
> -       /* CRT state */
> -       if (HAS_PCH_SPLIT(dev)) {
> -               dev_priv->saveADPA = I915_READ(PCH_ADPA);
> -       } else {
> -               dev_priv->saveADPA = I915_READ(ADPA);
> -       }
> -
>         /* LVDS state */
>         if (HAS_PCH_SPLIT(dev)) {
>                 dev_priv->savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
> @@ -719,12 +725,6 @@ static void i915_restore_display(struct drm_device *dev)
>         /* Don't restore them in KMS mode */
>         i915_restore_modeset_reg(dev);
>
> -       /* CRT state */
> -       if (HAS_PCH_SPLIT(dev))
> -               I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
> -       else
> -               I915_WRITE(ADPA, dev_priv->saveADPA);
> -
>         /* LVDS state */
>         if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
>                 I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
> --
> 1.7.11.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Paulo Zanoni

  reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-11 18:08 [PATCH 0/6] reduce register save/restoring accross suspend/resume Daniel Vetter
2012-10-11 18:08 ` [PATCH 1/6] drm/i915/crt: don't set HOTPLUG bits on !PCH Daniel Vetter
2012-10-12  2:47   ` Paulo Zanoni
2012-10-12  8:45     ` Daniel Vetter
2012-10-12 17:17       ` Paulo Zanoni
2012-10-12 17:26         ` Daniel Vetter
2012-10-17 21:31           ` Paulo Zanoni
2012-10-11 18:08 ` [PATCH 2/6] drm/i915/crt: explicitly set up HOTPLUG_BITS on resume Daniel Vetter
2012-10-17 21:42   ` Paulo Zanoni
2012-10-11 18:08 ` [PATCH 3/6] drm/i915: don't save/restor ADPA for kms Daniel Vetter
2012-10-17 21:49   ` Paulo Zanoni [this message]
2012-10-18 12:34     ` Daniel Vetter
2012-10-11 18:08 ` [PATCH 4/6] drm/i915: don't save/restore DP regs " Daniel Vetter
2012-10-11 18:08 ` [PATCH 5/6] drm/i915: don't save/restore irq " Daniel Vetter
2012-10-11 18:08 ` [PATCH 6/6] drm/i915: don't save/restore HWS_PGA reg " Daniel Vetter
2012-10-17  9:32   ` [PATCH 1/3] drm/i915: don't save/restore DP regs " Daniel Vetter
2012-10-17  9:32     ` [PATCH 2/3] drm/i915: don't save/restore irq " Daniel Vetter
2012-10-17  9:32     ` [PATCH 3/3] drm/i915: don't save/restore HWS_PGA reg " Daniel Vetter
2012-10-17 19:52     ` [PATCH 1/3] drm/i915: don't save/restore DP regs " Paulo Zanoni
2012-10-17 20:39       ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CA+gsUGR3cnTgUtYBRcr1Scj4f5Gaz0rn_HNb=Tckb4qw6Viuvg@mail.gmail.com' \
    --to=przanoni@gmail.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git