Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: "Gupta, Anshuman" <anshuman.gupta@intel.com>
To: "Nikula, Jani" <jani.nikula@intel.com>,
	Chris Wilson <chris@chris-wilson.co.uk>,
	"intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>
Cc: Sean Paul <seanpaul@chromium.org>,
	Chris Wilson <chris@chris-wilson.co.uk>
Subject: Re: [Intel-gfx] [PATCH] drm/i915/display: Set error value before returning in intel_hdcp*_disable()
Date: Fri, 15 Jan 2021 12:08:44 +0000
Message-ID: <c33ab4b0726544a8b5780018ced09758@intel.com> (raw)
In-Reply-To: <87bldqpjxi.fsf@intel.com>



> -----Original Message-----
> From: Jani Nikula <jani.nikula@intel.com>
> Sent: Friday, January 15, 2021 4:05 PM
> To: Chris Wilson <chris@chris-wilson.co.uk>; intel-gfx@lists.freedesktop.org
> Cc: Chris Wilson <chris@chris-wilson.co.uk>; C, Ramalingam
> <ramalingam.c@intel.com>; Shankar, Uma <uma.shankar@intel.com>;
> Gupta, Anshuman <anshuman.gupta@intel.com>; Sean Paul
> <seanpaul@chromium.org>
> Subject: Re: [PATCH] drm/i915/display: Set error value before returning in
> intel_hdcp*_disable()
> 
> On Fri, 15 Jan 2021, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> > drivers/gpu/drm/i915/display/intel_hdcp.c:886 _intel_hdcp_disable()
> error: uninitialized symbol 'ret'.
> > drivers/gpu/drm/i915/display/intel_hdcp.c:1951 _intel_hdcp2_disable()
> error: uninitialized symbol 'ret'.
> >
> > Given the comment that this error reflects the status of all
> > connectors within this MST topology, I opted to use -EBUSY to indicate
> > not all were ready.
> >
> > Fixes: 2a743b7b8a8b ("drm/i915/hdcp: Configure HDCP1.4 MST steram
> > encryption status")
> > Fixes: 899c8762f981 ("drm/i915/hdcp: Configure HDCP2.2 MST steram
> > encryption status")
> > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > Cc: Ramalingam C <ramalingam.c@intel.com>
> > Cc: Uma Shankar <uma.shankar@intel.com>
> > Cc: Anshuman Gupta <anshuman.gupta@intel.com>
> > Cc: Sean Paul <seanpaul@chromium.org>
> > Cc: Jani Nikula <jani.nikula@intel.com>
> 
> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> 
> > ---
> >  drivers/gpu/drm/i915/display/intel_hdcp.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c
> > b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > index db8dff2eeb0a..2be4822b91a0 100644
> > --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > @@ -883,7 +883,7 @@ static int _intel_hdcp_disable(struct
> intel_connector *connector)
> >  	 * until it disabled HDCP encryption for all connectors in MST
> topology.
> >  	 */
> >  	if (dig_port->num_hdcp_streams > 0)
> > -		return ret;
> > +		return -EBUSY;
Please return 0  as a fix to static analysis warning, It is not an error. 
Above condition will only true for MST case, so it always was returning return value from stream_encryption().

Thanks,
Anshuman Gupta.
> >
> >  	hdcp->hdcp_encrypted = false;
> >  	intel_de_write(dev_priv, HDCP_CONF(dev_priv, cpu_transcoder,
> port),
> > 0); @@ -1948,7 +1948,7 @@ static int _intel_hdcp2_disable(struct
> intel_connector *connector)
> >  	}
> >
> >  	if (dig_port->num_hdcp_streams > 0)
> > -		return ret;
> > +		return -EBUSY;
> >
> >  	ret = hdcp2_disable_encryption(connector);
> 
> --
> Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-15  9:20 Chris Wilson
2021-01-15 10:35 ` Jani Nikula
2021-01-15 12:08   ` Gupta, Anshuman [this message]
2021-01-15 14:06     ` Gupta, Anshuman
2021-01-15 11:01 ` [Intel-gfx] ✓ Fi.CI.BAT: success for " Patchwork
2021-01-15 12:15 ` [Intel-gfx] [PATCH v2] drm/i915/display: Set return " Chris Wilson
2021-01-15 15:51 ` [Intel-gfx] ✗ Fi.CI.IGT: failure for drm/i915/display: Set error " Patchwork
2021-01-15 16:42 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/display: Set error value before returning in intel_hdcp*_disable() (rev2) Patchwork
2021-01-15 22:56 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c33ab4b0726544a8b5780018ced09758@intel.com \
    --to=anshuman.gupta@intel.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=seanpaul@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git