kernel-hardening.lists.openwall.com archive mirror
 help / color / mirror / Atom feed
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
To: linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
	netdev@vger.kernel.org
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>,
	"René van Dorst" <opensource@vdorst.com>,
	"Ralf Baechle" <ralf@linux-mips.org>,
	"Paul Burton" <paul.burton@mips.com>,
	"James Hogan" <jhogan@kernel.org>,
	linux-mips@linux-mips.org, "Samuel Neves" <sneves@dei.uc.pt>,
	"Jean-Philippe Aumasson" <jeanphilippe.aumasson@gmail.com>,
	"Andy Lutomirski" <luto@kernel.org>,
	"Greg KH" <gregkh@linuxfoundation.org>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Linus Torvalds" <torvalds@linux-foundation.org>,
	kernel-hardening@lists.openwall.com
Subject: [PATCH net-next v9 06/19] zinc: ChaCha20 MIPS32r2 implementation
Date: Fri, 22 Mar 2019 01:11:09 -0600	[thread overview]
Message-ID: <20190322071122.6677-7-Jason@zx2c4.com> (raw)
In-Reply-To: <20190322071122.6677-1-Jason@zx2c4.com>

This MIPS32r2 implementation comes from René van Dorst and me and
results in a nice speedup on the usual OpenWRT targets.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Co-developed-by: René van Dorst <opensource@vdorst.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Samuel Neves <sneves@dei.uc.pt>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-crypto@vger.kernel.org
---
 lib/zinc/Makefile                      |   2 +
 lib/zinc/chacha20/chacha20-mips-glue.c |  27 ++
 lib/zinc/chacha20/chacha20-mips.S      | 424 +++++++++++++++++++++++++
 lib/zinc/chacha20/chacha20.c           |   2 +
 4 files changed, 455 insertions(+)
 create mode 100644 lib/zinc/chacha20/chacha20-mips-glue.c
 create mode 100644 lib/zinc/chacha20/chacha20-mips.S

diff --git a/lib/zinc/Makefile b/lib/zinc/Makefile
index 841029072542..213e305b699d 100644
--- a/lib/zinc/Makefile
+++ b/lib/zinc/Makefile
@@ -6,6 +6,8 @@ zinc_chacha20-y := chacha20/chacha20.o
 zinc_chacha20-$(CONFIG_ZINC_ARCH_X86_64) += chacha20/chacha20-x86_64.o
 zinc_chacha20-$(CONFIG_ZINC_ARCH_ARM) += chacha20/chacha20-arm.o chacha20/chacha20-unrolled-arm.o
 zinc_chacha20-$(CONFIG_ZINC_ARCH_ARM64) += chacha20/chacha20-arm64.o
+zinc_chacha20-$(CONFIG_ZINC_ARCH_MIPS) += chacha20/chacha20-mips.o
+AFLAGS_chacha20-mips.o += -O2 # This is required to fill the branch delay slots
 perlasm-targets += chacha20/chacha20-x86_64.S chacha20/chacha20-arm.S chacha20/chacha20-arm64.S
 obj-$(CONFIG_ZINC_CHACHA20) += zinc_chacha20.o
 
diff --git a/lib/zinc/chacha20/chacha20-mips-glue.c b/lib/zinc/chacha20/chacha20-mips-glue.c
new file mode 100644
index 000000000000..96ce01e2c133
--- /dev/null
+++ b/lib/zinc/chacha20/chacha20-mips-glue.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ */
+
+asmlinkage void chacha20_mips(u32 state[16], u8 *out, const u8 *in,
+			      const size_t len);
+static bool *const chacha20_nobs[] __initconst = { };
+static void __init chacha20_fpu_init(void)
+{
+}
+
+static inline bool chacha20_arch(struct chacha20_ctx *ctx, u8 *dst,
+				 const u8 *src, size_t len,
+				 simd_context_t *simd_context)
+{
+	chacha20_mips(ctx->state, dst, src, len);
+	return true;
+}
+
+static inline bool hchacha20_arch(u32 derived_key[CHACHA20_KEY_WORDS],
+				  const u8 nonce[HCHACHA20_NONCE_SIZE],
+				  const u8 key[HCHACHA20_KEY_SIZE],
+				  simd_context_t *simd_context)
+{
+	return false;
+}
diff --git a/lib/zinc/chacha20/chacha20-mips.S b/lib/zinc/chacha20/chacha20-mips.S
new file mode 100644
index 000000000000..a81e02db95e7
--- /dev/null
+++ b/lib/zinc/chacha20/chacha20-mips.S
@@ -0,0 +1,424 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2016-2018 René van Dorst <opensource@vdorst.com>. All Rights Reserved.
+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ */
+
+#define MASK_U32		0x3c
+#define CHACHA20_BLOCK_SIZE	64
+#define STACK_SIZE		32
+
+#define X0	$t0
+#define X1	$t1
+#define X2	$t2
+#define X3	$t3
+#define X4	$t4
+#define X5	$t5
+#define X6	$t6
+#define X7	$t7
+#define X8	$t8
+#define X9	$t9
+#define X10	$v1
+#define X11	$s6
+#define X12	$s5
+#define X13	$s4
+#define X14	$s3
+#define X15	$s2
+/* Use regs which are overwritten on exit for Tx so we don't leak clear data. */
+#define T0	$s1
+#define T1	$s0
+#define T(n)	T ## n
+#define X(n)	X ## n
+
+/* Input arguments */
+#define STATE		$a0
+#define OUT		$a1
+#define IN		$a2
+#define BYTES		$a3
+
+/* Output argument */
+/* NONCE[0] is kept in a register and not in memory.
+ * We don't want to touch original value in memory.
+ * Must be incremented every loop iteration.
+ */
+#define NONCE_0		$v0
+
+/* SAVED_X and SAVED_CA are set in the jump table.
+ * Use regs which are overwritten on exit else we don't leak clear data.
+ * They are used to handling the last bytes which are not multiple of 4.
+ */
+#define SAVED_X		X15
+#define SAVED_CA	$s7
+
+#define IS_UNALIGNED	$s7
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+#define MSB 0
+#define LSB 3
+#define ROTx rotl
+#define ROTR(n) rotr n, 24
+#define	CPU_TO_LE32(n) \
+	wsbh	n; \
+	rotr	n, 16;
+#else
+#define MSB 3
+#define LSB 0
+#define ROTx rotr
+#define CPU_TO_LE32(n)
+#define ROTR(n)
+#endif
+
+#define FOR_EACH_WORD(x) \
+	x( 0); \
+	x( 1); \
+	x( 2); \
+	x( 3); \
+	x( 4); \
+	x( 5); \
+	x( 6); \
+	x( 7); \
+	x( 8); \
+	x( 9); \
+	x(10); \
+	x(11); \
+	x(12); \
+	x(13); \
+	x(14); \
+	x(15);
+
+#define FOR_EACH_WORD_REV(x) \
+	x(15); \
+	x(14); \
+	x(13); \
+	x(12); \
+	x(11); \
+	x(10); \
+	x( 9); \
+	x( 8); \
+	x( 7); \
+	x( 6); \
+	x( 5); \
+	x( 4); \
+	x( 3); \
+	x( 2); \
+	x( 1); \
+	x( 0);
+
+#define PLUS_ONE_0	 1
+#define PLUS_ONE_1	 2
+#define PLUS_ONE_2	 3
+#define PLUS_ONE_3	 4
+#define PLUS_ONE_4	 5
+#define PLUS_ONE_5	 6
+#define PLUS_ONE_6	 7
+#define PLUS_ONE_7	 8
+#define PLUS_ONE_8	 9
+#define PLUS_ONE_9	10
+#define PLUS_ONE_10	11
+#define PLUS_ONE_11	12
+#define PLUS_ONE_12	13
+#define PLUS_ONE_13	14
+#define PLUS_ONE_14	15
+#define PLUS_ONE_15	16
+#define PLUS_ONE(x)	PLUS_ONE_ ## x
+#define _CONCAT3(a,b,c)	a ## b ## c
+#define CONCAT3(a,b,c)	_CONCAT3(a,b,c)
+
+#define STORE_UNALIGNED(x) \
+CONCAT3(.Lchacha20_mips_xor_unaligned_, PLUS_ONE(x), _b: ;) \
+	.if (x != 12); \
+		lw	T0, (x*4)(STATE); \
+	.endif; \
+	lwl	T1, (x*4)+MSB ## (IN); \
+	lwr	T1, (x*4)+LSB ## (IN); \
+	.if (x == 12); \
+		addu	X ## x, NONCE_0; \
+	.else; \
+		addu	X ## x, T0; \
+	.endif; \
+	CPU_TO_LE32(X ## x); \
+	xor	X ## x, T1; \
+	swl	X ## x, (x*4)+MSB ## (OUT); \
+	swr	X ## x, (x*4)+LSB ## (OUT);
+
+#define STORE_ALIGNED(x) \
+CONCAT3(.Lchacha20_mips_xor_aligned_, PLUS_ONE(x), _b: ;) \
+	.if (x != 12); \
+		lw	T0, (x*4)(STATE); \
+	.endif; \
+	lw	T1, (x*4) ## (IN); \
+	.if (x == 12); \
+		addu	X ## x, NONCE_0; \
+	.else; \
+		addu	X ## x, T0; \
+	.endif; \
+	CPU_TO_LE32(X ## x); \
+	xor	X ## x, T1; \
+	sw	X ## x, (x*4) ## (OUT);
+
+/* Jump table macro.
+ * Used for setup and handling the last bytes, which are not multiple of 4.
+ * X15 is free to store Xn
+ * Every jumptable entry must be equal in size.
+ */
+#define JMPTBL_ALIGNED(x) \
+.Lchacha20_mips_jmptbl_aligned_ ## x: ; \
+	.set	noreorder; \
+	b	.Lchacha20_mips_xor_aligned_ ## x ## _b; \
+	.if (x == 12); \
+		addu	SAVED_X, X ## x, NONCE_0; \
+	.else; \
+		addu	SAVED_X, X ## x, SAVED_CA; \
+	.endif; \
+	.set	reorder
+
+#define JMPTBL_UNALIGNED(x) \
+.Lchacha20_mips_jmptbl_unaligned_ ## x: ; \
+	.set	noreorder; \
+	b	.Lchacha20_mips_xor_unaligned_ ## x ## _b; \
+	.if (x == 12); \
+		addu	SAVED_X, X ## x, NONCE_0; \
+	.else; \
+		addu	SAVED_X, X ## x, SAVED_CA; \
+	.endif; \
+	.set	reorder
+
+#define AXR(A, B, C, D,  K, L, M, N,  V, W, Y, Z,  S) \
+	addu	X(A), X(K); \
+	addu	X(B), X(L); \
+	addu	X(C), X(M); \
+	addu	X(D), X(N); \
+	xor	X(V), X(A); \
+	xor	X(W), X(B); \
+	xor	X(Y), X(C); \
+	xor	X(Z), X(D); \
+	rotl	X(V), S;    \
+	rotl	X(W), S;    \
+	rotl	X(Y), S;    \
+	rotl	X(Z), S;
+
+.text
+.set	reorder
+.set	noat
+.globl	chacha20_mips
+.ent	chacha20_mips
+chacha20_mips:
+	.frame	$sp, STACK_SIZE, $ra
+
+	addiu	$sp, -STACK_SIZE
+
+	/* Return bytes = 0. */
+	beqz	BYTES, .Lchacha20_mips_end
+
+	lw	NONCE_0, 48(STATE)
+
+	/* Save s0-s7 */
+	sw	$s0,  0($sp)
+	sw	$s1,  4($sp)
+	sw	$s2,  8($sp)
+	sw	$s3, 12($sp)
+	sw	$s4, 16($sp)
+	sw	$s5, 20($sp)
+	sw	$s6, 24($sp)
+	sw	$s7, 28($sp)
+
+	/* Test IN or OUT is unaligned.
+	 * IS_UNALIGNED = ( IN | OUT ) & 0x00000003
+	 */
+	or	IS_UNALIGNED, IN, OUT
+	andi	IS_UNALIGNED, 0x3
+
+	/* Set number of rounds */
+	li	$at, 20
+
+	b	.Lchacha20_rounds_start
+
+.align 4
+.Loop_chacha20_rounds:
+	addiu	IN,  CHACHA20_BLOCK_SIZE
+	addiu	OUT, CHACHA20_BLOCK_SIZE
+	addiu	NONCE_0, 1
+
+.Lchacha20_rounds_start:
+	lw	X0,  0(STATE)
+	lw	X1,  4(STATE)
+	lw	X2,  8(STATE)
+	lw	X3,  12(STATE)
+
+	lw	X4,  16(STATE)
+	lw	X5,  20(STATE)
+	lw	X6,  24(STATE)
+	lw	X7,  28(STATE)
+	lw	X8,  32(STATE)
+	lw	X9,  36(STATE)
+	lw	X10, 40(STATE)
+	lw	X11, 44(STATE)
+
+	move	X12, NONCE_0
+	lw	X13, 52(STATE)
+	lw	X14, 56(STATE)
+	lw	X15, 60(STATE)
+
+.Loop_chacha20_xor_rounds:
+	addiu	$at, -2
+	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15, 16);
+	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7, 12);
+	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15,  8);
+	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7,  7);
+	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14, 16);
+	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4, 12);
+	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14,  8);
+	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4,  7);
+	bnez	$at, .Loop_chacha20_xor_rounds
+
+	addiu	BYTES, -(CHACHA20_BLOCK_SIZE)
+
+	/* Is data src/dst unaligned? Jump */
+	bnez	IS_UNALIGNED, .Loop_chacha20_unaligned
+
+	/* Set number rounds here to fill delayslot. */
+	li	$at, 20
+
+	/* BYTES < 0, it has no full block. */
+	bltz	BYTES, .Lchacha20_mips_no_full_block_aligned
+
+	FOR_EACH_WORD_REV(STORE_ALIGNED)
+
+	/* BYTES > 0? Loop again. */
+	bgtz	BYTES, .Loop_chacha20_rounds
+
+	/* Place this here to fill delay slot */
+	addiu	NONCE_0, 1
+
+	/* BYTES < 0? Handle last bytes */
+	bltz	BYTES, .Lchacha20_mips_xor_bytes
+
+.Lchacha20_mips_xor_done:
+	/* Restore used registers */
+	lw	$s0,  0($sp)
+	lw	$s1,  4($sp)
+	lw	$s2,  8($sp)
+	lw	$s3, 12($sp)
+	lw	$s4, 16($sp)
+	lw	$s5, 20($sp)
+	lw	$s6, 24($sp)
+	lw	$s7, 28($sp)
+
+	/* Write NONCE_0 back to right location in state */
+	sw	NONCE_0, 48(STATE)
+
+.Lchacha20_mips_end:
+	addiu	$sp, STACK_SIZE
+	jr	$ra
+
+.Lchacha20_mips_no_full_block_aligned:
+	/* Restore the offset on BYTES */
+	addiu	BYTES, CHACHA20_BLOCK_SIZE
+
+	/* Get number of full WORDS */
+	andi	$at, BYTES, MASK_U32
+
+	/* Load upper half of jump table addr */
+	lui	T0, %hi(.Lchacha20_mips_jmptbl_aligned_0)
+
+	/* Calculate lower half jump table offset */
+	ins	T0, $at, 1, 6
+
+	/* Add offset to STATE */
+	addu	T1, STATE, $at
+
+	/* Add lower half jump table addr */
+	addiu	T0, %lo(.Lchacha20_mips_jmptbl_aligned_0)
+
+	/* Read value from STATE */
+	lw	SAVED_CA, 0(T1)
+
+	/* Store remaining bytecounter as negative value */
+	subu	BYTES, $at, BYTES
+
+	jr	T0
+
+	/* Jump table */
+	FOR_EACH_WORD(JMPTBL_ALIGNED)
+
+
+.Loop_chacha20_unaligned:
+	/* Set number rounds here to fill delayslot. */
+	li	$at, 20
+
+	/* BYTES > 0, it has no full block. */
+	bltz	BYTES, .Lchacha20_mips_no_full_block_unaligned
+
+	FOR_EACH_WORD_REV(STORE_UNALIGNED)
+
+	/* BYTES > 0? Loop again. */
+	bgtz	BYTES, .Loop_chacha20_rounds
+
+	/* Write NONCE_0 back to right location in state */
+	sw	NONCE_0, 48(STATE)
+
+	.set noreorder
+	/* Fall through to byte handling */
+	bgez	BYTES, .Lchacha20_mips_xor_done
+.Lchacha20_mips_xor_unaligned_0_b:
+.Lchacha20_mips_xor_aligned_0_b:
+	/* Place this here to fill delay slot */
+	addiu	NONCE_0, 1
+	.set reorder
+
+.Lchacha20_mips_xor_bytes:
+	addu	IN, $at
+	addu	OUT, $at
+	/* First byte */
+	lbu	T1, 0(IN)
+	addiu	$at, BYTES, 1
+	CPU_TO_LE32(SAVED_X)
+	ROTR(SAVED_X)
+	xor	T1, SAVED_X
+	sb	T1, 0(OUT)
+	beqz	$at, .Lchacha20_mips_xor_done
+	/* Second byte */
+	lbu	T1, 1(IN)
+	addiu	$at, BYTES, 2
+	ROTx	SAVED_X, 8
+	xor	T1, SAVED_X
+	sb	T1, 1(OUT)
+	beqz	$at, .Lchacha20_mips_xor_done
+	/* Third byte */
+	lbu	T1, 2(IN)
+	ROTx	SAVED_X, 8
+	xor	T1, SAVED_X
+	sb	T1, 2(OUT)
+	b	.Lchacha20_mips_xor_done
+
+.Lchacha20_mips_no_full_block_unaligned:
+	/* Restore the offset on BYTES */
+	addiu	BYTES, CHACHA20_BLOCK_SIZE
+
+	/* Get number of full WORDS */
+	andi	$at, BYTES, MASK_U32
+
+	/* Load upper half of jump table addr */
+	lui	T0, %hi(.Lchacha20_mips_jmptbl_unaligned_0)
+
+	/* Calculate lower half jump table offset */
+	ins	T0, $at, 1, 6
+
+	/* Add offset to STATE */
+	addu	T1, STATE, $at
+
+	/* Add lower half jump table addr */
+	addiu	T0, %lo(.Lchacha20_mips_jmptbl_unaligned_0)
+
+	/* Read value from STATE */
+	lw	SAVED_CA, 0(T1)
+
+	/* Store remaining bytecounter as negative value */
+	subu	BYTES, $at, BYTES
+
+	jr	T0
+
+	/* Jump table */
+	FOR_EACH_WORD(JMPTBL_UNALIGNED)
+.end chacha20_mips
+.set at
diff --git a/lib/zinc/chacha20/chacha20.c b/lib/zinc/chacha20/chacha20.c
index d4e6316eb5a3..8061d25bf396 100644
--- a/lib/zinc/chacha20/chacha20.c
+++ b/lib/zinc/chacha20/chacha20.c
@@ -20,6 +20,8 @@
 #include "chacha20-x86_64-glue.c"
 #elif defined(CONFIG_ZINC_ARCH_ARM) || defined(CONFIG_ZINC_ARCH_ARM64)
 #include "chacha20-arm-glue.c"
+#elif defined(CONFIG_ZINC_ARCH_MIPS)
+#include "chacha20-mips-glue.c"
 #else
 static bool *const chacha20_nobs[] __initconst = { };
 static void __init chacha20_fpu_init(void)
-- 
2.21.0

  parent reply	other threads:[~2019-03-22  7:11 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190322071122.6677-1-Jason@zx2c4.com>
2019-03-22  7:11 ` [PATCH net-next v9 02/19] zinc: introduce minimal cryptography library Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 03/19] zinc: ChaCha20 generic C implementation and selftest Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 04/19] zinc: ChaCha20 x86_64 implementation Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 05/19] zinc: ChaCha20 ARM and ARM64 implementations Jason A. Donenfeld
2019-03-22 23:17   ` Stefan Agner
2019-03-22  7:11 ` Jason A. Donenfeld [this message]
2019-03-22  7:11 ` [PATCH net-next v9 07/19] zinc: Poly1305 generic C implementations and selftest Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 08/19] zinc: Poly1305 x86_64 implementation Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 09/19] zinc: Poly1305 ARM and ARM64 implementations Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 10/19] zinc: Poly1305 MIPS64 and MIPS32r2 implementations Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 11/19] zinc: ChaCha20Poly1305 construction and selftest Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 12/19] zinc: BLAKE2s generic C implementation " Jason A. Donenfeld
2019-03-26 17:38   ` Eric Biggers
2019-03-22  7:11 ` [PATCH net-next v9 13/19] zinc: BLAKE2s x86_64 implementation Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 14/19] zinc: Curve25519 generic C implementations and selftest Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 15/19] zinc: Curve25519 x86_64 implementation Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 16/19] zinc: import Bernstein and Schwabe's Curve25519 ARM implementation Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 17/19] zinc: " Jason A. Donenfeld
2019-03-22  7:11 ` [PATCH net-next v9 18/19] security/keys: rewrite big_key crypto to use Zinc Jason A. Donenfeld

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190322071122.6677-7-Jason@zx2c4.com \
    --to=jason@zx2c4.com \
    --cc=akpm@linux-foundation.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jeanphilippe.aumasson@gmail.com \
    --cc=jhogan@kernel.org \
    --cc=kernel-hardening@lists.openwall.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=luto@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=opensource@vdorst.com \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=sneves@dei.uc.pt \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).