Kernel-hardening Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 00/22] add support for Clang LTO
@ 2020-06-24 20:31 Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 01/22] objtool: use sh_info to find the base for .rela sections Sami Tolvanen
                   ` (25 more replies)
  0 siblings, 26 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

This patch series adds support for building x86_64 and arm64 kernels
with Clang's Link Time Optimization (LTO).

In addition to performance, the primary motivation for LTO is to allow
Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
Pixel devices have shipped with LTO+CFI kernels since 2018.

Most of the patches are build system changes for handling LLVM bitcode,
which Clang produces with LTO instead of ELF object files, postponing
ELF processing until a later stage, and ensuring initcall ordering.

Note that first objtool patch in the series is already in linux-next,
but as it's needed with LTO, I'm including it also here to make testing
easier.

Sami Tolvanen (22):
  objtool: use sh_info to find the base for .rela sections
  kbuild: add support for Clang LTO
  kbuild: lto: fix module versioning
  kbuild: lto: fix recordmcount
  kbuild: lto: postpone objtool
  kbuild: lto: limit inlining
  kbuild: lto: merge module sections
  kbuild: lto: remove duplicate dependencies from .mod files
  init: lto: ensure initcall ordering
  init: lto: fix PREL32 relocations
  pci: lto: fix PREL32 relocations
  modpost: lto: strip .lto from module names
  scripts/mod: disable LTO for empty.c
  efi/libstub: disable LTO
  drivers/misc/lkdtm: disable LTO for rodata.o
  arm64: export CC_USING_PATCHABLE_FUNCTION_ENTRY
  arm64: vdso: disable LTO
  arm64: allow LTO_CLANG and THINLTO to be selected
  x86, vdso: disable LTO only for vDSO
  x86, ftrace: disable recordmcount for ftrace_make_nop
  x86, relocs: Ignore L4_PAGE_OFFSET relocations
  x86, build: allow LTO_CLANG and THINLTO to be selected

 .gitignore                            |   1 +
 Makefile                              |  27 ++-
 arch/Kconfig                          |  65 +++++++
 arch/arm64/Kconfig                    |   2 +
 arch/arm64/Makefile                   |   1 +
 arch/arm64/kernel/vdso/Makefile       |   4 +-
 arch/x86/Kconfig                      |   2 +
 arch/x86/Makefile                     |   5 +
 arch/x86/entry/vdso/Makefile          |   5 +-
 arch/x86/kernel/ftrace.c              |   1 +
 arch/x86/tools/relocs.c               |   1 +
 drivers/firmware/efi/libstub/Makefile |   2 +
 drivers/misc/lkdtm/Makefile           |   1 +
 include/asm-generic/vmlinux.lds.h     |  12 +-
 include/linux/compiler-clang.h        |   4 +
 include/linux/compiler.h              |   2 +-
 include/linux/compiler_types.h        |   4 +
 include/linux/init.h                  |  78 +++++++-
 include/linux/pci.h                   |  15 +-
 kernel/trace/ftrace.c                 |   1 +
 lib/Kconfig.debug                     |   2 +-
 scripts/Makefile.build                |  55 +++++-
 scripts/Makefile.lib                  |   6 +-
 scripts/Makefile.modfinal             |  40 +++-
 scripts/Makefile.modpost              |  26 ++-
 scripts/generate_initcall_order.pl    | 270 ++++++++++++++++++++++++++
 scripts/link-vmlinux.sh               | 100 +++++++++-
 scripts/mod/Makefile                  |   1 +
 scripts/mod/modpost.c                 |  16 +-
 scripts/mod/modpost.h                 |   9 +
 scripts/mod/sumversion.c              |   6 +-
 scripts/module-lto.lds                |  26 +++
 scripts/recordmcount.c                |   3 +-
 tools/objtool/elf.c                   |   2 +-
 34 files changed, 737 insertions(+), 58 deletions(-)
 create mode 100755 scripts/generate_initcall_order.pl
 create mode 100644 scripts/module-lto.lds


base-commit: 26e122e97a3d0390ebec389347f64f3730fdf48f
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 01/22] objtool: use sh_info to find the base for .rela sections
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 02/22] kbuild: add support for Clang LTO Sami Tolvanen
                   ` (24 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen, Josh Poimboeuf

ELF doesn't require .rela section names to match the base section. Use
the section index in sh_info to find the section instead of looking it
up by name.

LLD, for example, generates a .rela section that doesn't match the base
section name when we merge sections in a linker script for a binary
compiled with -ffunction-sections.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 tools/objtool/elf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c
index 84225679f96d..c1ba92abaa03 100644
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -502,7 +502,7 @@ static int read_relas(struct elf *elf)
 		if (sec->sh.sh_type != SHT_RELA)
 			continue;
 
-		sec->base = find_section_by_name(elf, sec->name + 5);
+		sec->base = find_section_by_index(elf, sec->sh.sh_info);
 		if (!sec->base) {
 			WARN("can't find base section for rela section %s",
 			     sec->name);
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 02/22] kbuild: add support for Clang LTO
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 01/22] objtool: use sh_info to find the base for .rela sections Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:53   ` Nick Desaulniers
  2020-06-25  2:26   ` Nathan Chancellor
  2020-06-24 20:31 ` [PATCH 03/22] kbuild: lto: fix module versioning Sami Tolvanen
                   ` (23 subsequent siblings)
  25 siblings, 2 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

This change adds build system support for Clang's Link Time
Optimization (LTO). With -flto, instead of ELF object files, Clang
produces LLVM bitcode, which is compiled into native code at link
time, allowing the final binary to be optimized globally. For more
details, see:

  https://llvm.org/docs/LinkTimeOptimization.html

The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
which defaults to LTO being disabled. To use LTO, the architecture
must select ARCH_SUPPORTS_LTO_CLANG and support:

  - compiling with Clang,
  - compiling inline assembly with Clang's integrated assembler,
  - and linking with LLD.

While using full LTO results in the best runtime performance, the
compilation is not scalable in time or memory. CONFIG_THINLTO
enables ThinLTO, which allows parallel optimization and faster
incremental builds. ThinLTO is used by default if the architecture
also selects ARCH_SUPPORTS_THINLTO:

  https://clang.llvm.org/docs/ThinLTO.html

To enable LTO, LLVM tools must be used to handle bitcode files. The
easiest way is to pass the LLVM=1 option to make:

  $ make LLVM=1 defconfig
  $ scripts/config -e LTO_CLANG
  $ make LLVM=1

Alternatively, at least the following LLVM tools must be used:

  CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm

To prepare for LTO support with other compilers, common parts are
gated behind the CONFIG_LTO option, and LTO can be disabled for
specific files by filtering out CC_FLAGS_LTO.

Note that support for DYNAMIC_FTRACE and MODVERSIONS are added in
follow-up patches.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 Makefile                          | 16 ++++++++
 arch/Kconfig                      | 66 +++++++++++++++++++++++++++++++
 include/asm-generic/vmlinux.lds.h | 11 ++++--
 scripts/Makefile.build            |  9 ++++-
 scripts/Makefile.modfinal         |  9 ++++-
 scripts/Makefile.modpost          | 24 ++++++++++-
 scripts/link-vmlinux.sh           | 32 +++++++++++----
 7 files changed, 151 insertions(+), 16 deletions(-)

diff --git a/Makefile b/Makefile
index ac2c61c37a73..0c7fe6fb2143 100644
--- a/Makefile
+++ b/Makefile
@@ -886,6 +886,22 @@ KBUILD_CFLAGS	+= $(CC_FLAGS_SCS)
 export CC_FLAGS_SCS
 endif
 
+ifdef CONFIG_LTO_CLANG
+ifdef CONFIG_THINLTO
+CC_FLAGS_LTO_CLANG := -flto=thin $(call cc-option, -fsplit-lto-unit)
+KBUILD_LDFLAGS	+= --thinlto-cache-dir=.thinlto-cache
+else
+CC_FLAGS_LTO_CLANG := -flto
+endif
+CC_FLAGS_LTO_CLANG += -fvisibility=default
+endif
+
+ifdef CONFIG_LTO
+CC_FLAGS_LTO	:= $(CC_FLAGS_LTO_CLANG)
+KBUILD_CFLAGS	+= $(CC_FLAGS_LTO)
+export CC_FLAGS_LTO
+endif
+
 # arch Makefile may override CC so keep this after arch Makefile is included
 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 
diff --git a/arch/Kconfig b/arch/Kconfig
index 8cc35dc556c7..e00b122293f8 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -552,6 +552,72 @@ config SHADOW_CALL_STACK
 	  reading and writing arbitrary memory may be able to locate them
 	  and hijack control flow by modifying the stacks.
 
+config LTO
+	bool
+
+config ARCH_SUPPORTS_LTO_CLANG
+	bool
+	help
+	  An architecture should select this option if it supports:
+	  - compiling with Clang,
+	  - compiling inline assembly with Clang's integrated assembler,
+	  - and linking with LLD.
+
+config ARCH_SUPPORTS_THINLTO
+	bool
+	help
+	  An architecture should select this option if it supports Clang's
+	  ThinLTO.
+
+config THINLTO
+	bool "Clang ThinLTO"
+	depends on LTO_CLANG && ARCH_SUPPORTS_THINLTO
+	default y
+	help
+	  This option enables Clang's ThinLTO, which allows for parallel
+	  optimization and faster incremental compiles. More information
+	  can be found from Clang's documentation:
+
+	    https://clang.llvm.org/docs/ThinLTO.html
+
+choice
+	prompt "Link Time Optimization (LTO)"
+	default LTO_NONE
+	help
+	  This option enables Link Time Optimization (LTO), which allows the
+	  compiler to optimize binaries globally.
+
+	  If unsure, select LTO_NONE.
+
+config LTO_NONE
+	bool "None"
+
+config LTO_CLANG
+	bool "Clang's Link Time Optimization (EXPERIMENTAL)"
+	depends on CC_IS_CLANG && CLANG_VERSION >= 110000 && LD_IS_LLD
+	depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
+	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
+	depends on ARCH_SUPPORTS_LTO_CLANG
+	depends on !FTRACE_MCOUNT_RECORD
+	depends on !KASAN
+	depends on !MODVERSIONS
+	select LTO
+	help
+          This option enables Clang's Link Time Optimization (LTO), which
+          allows the compiler to optimize the kernel globally. If you enable
+          this option, the compiler generates LLVM bitcode instead of ELF
+          object files, and the actual compilation from bitcode happens at
+          the LTO link step, which may take several minutes depending on the
+          kernel configuration. More information can be found from LLVM's
+          documentation:
+
+	    https://llvm.org/docs/LinkTimeOptimization.html
+
+	  To select this option, you also need to use LLVM tools to handle
+	  the bitcode by passing LLVM=1 to make.
+
+endchoice
+
 config HAVE_ARCH_WITHIN_STACK_FRAMES
 	bool
 	help
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index db600ef218d7..78079000c05a 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -89,15 +89,18 @@
  * .data. We don't want to pull in .data..other sections, which Linux
  * has defined. Same for text and bss.
  *
+ * With LTO_CLANG, the linker also splits sections by default, so we need
+ * these macros to combine the sections during the final link.
+ *
  * RODATA_MAIN is not used because existing code already defines .rodata.x
  * sections to be brought in with rodata.
  */
-#ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
+#if defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || defined(CONFIG_LTO_CLANG)
 #define TEXT_MAIN .text .text.[0-9a-zA-Z_]*
-#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..LPBX*
+#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..L* .data..compoundliteral*
 #define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]*
-#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]*
-#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]*
+#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]* .rodata..L*
+#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]* .bss..compoundliteral*
 #define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]*
 #else
 #define TEXT_MAIN .text
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 2e8810b7e5ed..f307e708a1b7 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -108,7 +108,7 @@ endif
 # ---------------------------------------------------------------------------
 
 quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
-      cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS), $(c_flags)) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
+      cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS) $(CC_FLAGS_LTO), $(c_flags)) -fverbose-asm -S -o $@ $<
 
 $(obj)/%.s: $(src)/%.c FORCE
 	$(call if_changed_dep,cc_s_c)
@@ -424,8 +424,15 @@ $(obj)/lib.a: $(lib-y) FORCE
 # Do not replace $(filter %.o,^) with $(real-prereqs). When a single object
 # module is turned into a multi object module, $^ will contain header file
 # dependencies recorded in the .*.cmd file.
+ifdef CONFIG_LTO_CLANG
+quiet_cmd_link_multi-m = AR [M]  $@
+cmd_link_multi-m =						\
+	rm -f $@; 						\
+	$(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(filter %.o,$^)
+else
 quiet_cmd_link_multi-m = LD [M]  $@
       cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^)
+endif
 
 $(multi-used-m): FORCE
 	$(call if_changed,link_multi-m)
diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index 411c1e600e7d..1005b147abd0 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -6,6 +6,7 @@
 PHONY := __modfinal
 __modfinal:
 
+include $(objtree)/include/config/auto.conf
 include $(srctree)/scripts/Kbuild.include
 
 # for c_flags
@@ -29,6 +30,12 @@ quiet_cmd_cc_o_c = CC [M]  $@
 
 ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
 
+ifdef CONFIG_LTO_CLANG
+# With CONFIG_LTO_CLANG, reuse the object file we compiled for modpost to
+# avoid a second slow LTO link
+prelink-ext := .lto
+endif
+
 quiet_cmd_ld_ko_o = LD [M]  $@
       cmd_ld_ko_o =                                                     \
 	$(LD) -r $(KBUILD_LDFLAGS)					\
@@ -37,7 +44,7 @@ quiet_cmd_ld_ko_o = LD [M]  $@
 		-o $@ $(filter %.o, $^);				\
 	$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
 
-$(modules): %.ko: %.o %.mod.o $(KBUILD_LDS_MODULE) FORCE
+$(modules): %.ko: %$(prelink-ext).o %.mod.o $(KBUILD_LDS_MODULE) FORCE
 	+$(call if_changed,ld_ko_o)
 
 targets += $(modules) $(modules:.ko=.mod.o)
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 3651cbf6ad49..9ced8aecd579 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -102,12 +102,32 @@ $(input-symdump):
 	@echo >&2 'WARNING: Symbol version dump "$@" is missing.'
 	@echo >&2 '         Modules may not have dependencies or modversions.'
 
+ifdef CONFIG_LTO_CLANG
+# With CONFIG_LTO_CLANG, .o files might be LLVM bitcode, so we need to run
+# LTO to compile them into native code before running modpost
+prelink-ext = .lto
+
+quiet_cmd_cc_lto_link_modules = LTO [M] $@
+cmd_cc_lto_link_modules =						\
+	$(LD) $(ld_flags) -r -o $@					\
+		--whole-archive $(filter-out FORCE,$^)
+
+%.lto.o: %.o FORCE
+	$(call if_changed,cc_lto_link_modules)
+
+PHONY += FORCE
+FORCE:
+
+endif
+
+modules := $(sort $(shell cat $(MODORDER)))
+
 # Read out modules.order to pass in modpost.
 # Otherwise, allmodconfig would fail with "Argument list too long".
 quiet_cmd_modpost = MODPOST $@
-      cmd_modpost = sed 's/ko$$/o/' $< | $(MODPOST) -T -
+      cmd_modpost = sed 's/\.ko$$/$(prelink-ext)\.o/' $< | $(MODPOST) -T -
 
-$(output-symdump): $(MODORDER) $(input-symdump) FORCE
+$(output-symdump): $(MODORDER) $(input-symdump) $(modules:.ko=$(prelink-ext).o) FORCE
 	$(call if_changed,modpost)
 
 targets += $(output-symdump)
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 92dd745906f4..a681b3b6722e 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -52,6 +52,14 @@ modpost_link()
 		${KBUILD_VMLINUX_LIBS}				\
 		--end-group"
 
+	if [ -n "${CONFIG_LTO_CLANG}" ]; then
+		# This might take a while, so indicate that we're doing
+		# an LTO link
+		info LTO ${1}
+	else
+		info LD ${1}
+	fi
+
 	${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${objects}
 }
 
@@ -99,13 +107,22 @@ vmlinux_link()
 	fi
 
 	if [ "${SRCARCH}" != "um" ]; then
-		objects="--whole-archive			\
-			${KBUILD_VMLINUX_OBJS}			\
-			--no-whole-archive			\
-			--start-group				\
-			${KBUILD_VMLINUX_LIBS}			\
-			--end-group				\
-			${@}"
+		if [ -n "${CONFIG_LTO_CLANG}" ]; then
+			# Use vmlinux.o instead of performing the slow LTO
+			# link again.
+			objects="--whole-archive		\
+				vmlinux.o 			\
+				--no-whole-archive		\
+				${@}"
+		else
+			objects="--whole-archive		\
+				${KBUILD_VMLINUX_OBJS}		\
+				--no-whole-archive		\
+				--start-group			\
+				${KBUILD_VMLINUX_LIBS}		\
+				--end-group			\
+				${@}"
+		fi
 
 		${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux}	\
 			${strip_debug#-Wl,}			\
@@ -270,7 +287,6 @@ fi;
 ${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1
 
 #link vmlinux.o
-info LD vmlinux.o
 modpost_link vmlinux.o
 objtool_link vmlinux.o
 
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 03/22] kbuild: lto: fix module versioning
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 01/22] objtool: use sh_info to find the base for .rela sections Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 02/22] kbuild: add support for Clang LTO Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 04/22] kbuild: lto: fix recordmcount Sami Tolvanen
                   ` (22 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 .gitignore               |  1 +
 Makefile                 |  3 ++-
 arch/Kconfig             |  1 -
 scripts/Makefile.build   | 33 +++++++++++++++++++++++++++++++--
 scripts/Makefile.modpost |  2 ++
 scripts/link-vmlinux.sh  | 25 ++++++++++++++++++++++++-
 6 files changed, 60 insertions(+), 5 deletions(-)

diff --git a/.gitignore b/.gitignore
index 87b9dd8a163b..51b02c2f2826 100644
--- a/.gitignore
+++ b/.gitignore
@@ -41,6 +41,7 @@
 *.so.dbg
 *.su
 *.symtypes
+*.symversions
 *.tab.[ch]
 *.tar
 *.xz
diff --git a/Makefile b/Makefile
index 0c7fe6fb2143..161ad0d1f77f 100644
--- a/Makefile
+++ b/Makefile
@@ -1793,7 +1793,8 @@ clean: $(clean-dirs)
 		-o -name '.tmp_*.o.*' \
 		-o -name '*.c.[012]*.*' \
 		-o -name '*.ll' \
-		-o -name '*.gcno' \) -type f -print | xargs rm -f
+		-o -name '*.gcno' \
+		-o -name '*.*.symversions' \) -type f -print | xargs rm -f
 
 # Generate tags for editors
 # ---------------------------------------------------------------------------
diff --git a/arch/Kconfig b/arch/Kconfig
index e00b122293f8..87488fe1e6b8 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -600,7 +600,6 @@ config LTO_CLANG
 	depends on ARCH_SUPPORTS_LTO_CLANG
 	depends on !FTRACE_MCOUNT_RECORD
 	depends on !KASAN
-	depends on !MODVERSIONS
 	select LTO
 	help
           This option enables Clang's Link Time Optimization (LTO), which
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index f307e708a1b7..5c0bbb6ddfcf 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -163,6 +163,15 @@ ifdef CONFIG_MODVERSIONS
 #   the actual value of the checksum generated by genksyms
 # o remove .tmp_<file>.o to <file>.o
 
+ifdef CONFIG_LTO_CLANG
+# Generate .o.symversions files for each .o with exported symbols, and link these
+# to the kernel and/or modules at the end.
+cmd_modversions_c =								\
+	if $(NM) $@ 2>/dev/null | grep -q __ksymtab; then			\
+		$(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
+		    > $@.symversions;						\
+	fi;
+else
 cmd_modversions_c =								\
 	if $(OBJDUMP) -h $@ | grep -q __ksymtab; then				\
 		$(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
@@ -174,6 +183,7 @@ cmd_modversions_c =								\
 		rm -f $(@D)/.tmp_$(@F:.o=.ver);					\
 	fi
 endif
+endif
 
 ifdef CONFIG_FTRACE_MCOUNT_RECORD
 ifndef CC_USING_RECORD_MCOUNT
@@ -389,6 +399,18 @@ $(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
 $(subdir-builtin): $(obj)/%/built-in.a: $(obj)/% ;
 $(subdir-modorder): $(obj)/%/modules.order: $(obj)/% ;
 
+# combine symversions for later processing
+quiet_cmd_update_lto_symversions = SYMVER  $@
+ifeq ($(CONFIG_LTO_CLANG) $(CONFIG_MODVERSIONS),y y)
+      cmd_update_lto_symversions =					\
+	rm -f $@.symversions						\
+	$(foreach n, $(filter-out FORCE,$^),				\
+		$(if $(wildcard $(n).symversions),			\
+			; cat $(n).symversions >> $@.symversions))
+else
+      cmd_update_lto_symversions = echo >/dev/null
+endif
+
 #
 # Rule to compile a set of .o files into one .a file (without symbol table)
 #
@@ -396,8 +418,11 @@ $(subdir-modorder): $(obj)/%/modules.order: $(obj)/% ;
 quiet_cmd_ar_builtin = AR      $@
       cmd_ar_builtin = rm -f $@; $(AR) cDPrST $@ $(real-prereqs)
 
+quiet_cmd_ar_and_symver = AR      $@
+      cmd_ar_and_symver = $(cmd_update_lto_symversions); $(cmd_ar_builtin)
+
 $(obj)/built-in.a: $(real-obj-y) FORCE
-	$(call if_changed,ar_builtin)
+	$(call if_changed,ar_and_symver)
 
 #
 # Rule to create modules.order file
@@ -417,8 +442,11 @@ $(obj)/modules.order: $(obj-m) FORCE
 #
 # Rule to compile a set of .o files into one .a file (with symbol table)
 #
+quiet_cmd_ar_lib = AR      $@
+      cmd_ar_lib = $(cmd_update_lto_symversions); $(cmd_ar)
+
 $(obj)/lib.a: $(lib-y) FORCE
-	$(call if_changed,ar)
+	$(call if_changed,ar_lib)
 
 # NOTE:
 # Do not replace $(filter %.o,^) with $(real-prereqs). When a single object
@@ -427,6 +455,7 @@ $(obj)/lib.a: $(lib-y) FORCE
 ifdef CONFIG_LTO_CLANG
 quiet_cmd_link_multi-m = AR [M]  $@
 cmd_link_multi-m =						\
+	$(cmd_update_lto_symversions);				\
 	rm -f $@; 						\
 	$(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(filter %.o,$^)
 else
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 9ced8aecd579..42dbdc2bbf73 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -110,6 +110,8 @@ prelink-ext = .lto
 quiet_cmd_cc_lto_link_modules = LTO [M] $@
 cmd_cc_lto_link_modules =						\
 	$(LD) $(ld_flags) -r -o $@					\
+		$(shell [ -s $(@:.lto.o=.o.symversions) ] &&		\
+			echo -T $(@:.lto.o=.o.symversions))		\
 		--whole-archive $(filter-out FORCE,$^)
 
 %.lto.o: %.o FORCE
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index a681b3b6722e..69a6d7254e28 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -39,11 +39,28 @@ info()
 	fi
 }
 
+# If CONFIG_LTO_CLANG is selected, collect generated symbol versions into
+# .tmp_symversions.lds
+gen_symversions()
+{
+	info GEN .tmp_symversions.lds
+	rm -f .tmp_symversions.lds
+
+	for a in ${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS}; do
+		for o in $(${AR} t $a 2>/dev/null); do
+			if [ -f ${o}.symversions ]; then
+				cat ${o}.symversions >> .tmp_symversions.lds
+			fi
+		done
+	done
+}
+
 # Link of vmlinux.o used for section mismatch analysis
 # ${1} output file
 modpost_link()
 {
 	local objects
+	local lds=""
 
 	objects="--whole-archive				\
 		${KBUILD_VMLINUX_OBJS}				\
@@ -53,6 +70,11 @@ modpost_link()
 		--end-group"
 
 	if [ -n "${CONFIG_LTO_CLANG}" ]; then
+		if [ -n "${CONFIG_MODVERSIONS}" ]; then
+			gen_symversions
+			lds="${lds} -T .tmp_symversions.lds"
+		fi
+
 		# This might take a while, so indicate that we're doing
 		# an LTO link
 		info LTO ${1}
@@ -60,7 +82,7 @@ modpost_link()
 		info LD ${1}
 	fi
 
-	${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${objects}
+	${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${lds} ${objects}
 }
 
 objtool_link()
@@ -238,6 +260,7 @@ cleanup()
 {
 	rm -f .btf.*
 	rm -f .tmp_System.map
+	rm -f .tmp_symversions.lds
 	rm -f .tmp_vmlinux*
 	rm -f System.map
 	rm -f vmlinux
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 04/22] kbuild: lto: fix recordmcount
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (2 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 03/22] kbuild: lto: fix module versioning Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 21:27   ` Peter Zijlstra
  2020-06-24 20:31 ` [PATCH 05/22] kbuild: lto: postpone objtool Sami Tolvanen
                   ` (21 subsequent siblings)
  25 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

With LTO, LLVM bitcode won't be compiled into native code until
modpost_link. This change postpones calls to recordmcount until after
this step.

In order to exclude specific functions from inspection, we add a new
code section .text..nomcount, which we tell recordmcount to ignore, and
a __nomcount attribute for moving functions to this section.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 Makefile                          |  2 +-
 arch/Kconfig                      |  2 +-
 include/asm-generic/vmlinux.lds.h |  1 +
 include/linux/compiler-clang.h    |  4 ++++
 include/linux/compiler_types.h    |  4 ++++
 kernel/trace/ftrace.c             |  1 +
 scripts/Makefile.build            |  9 +++++++++
 scripts/Makefile.modfinal         | 18 ++++++++++++++++--
 scripts/link-vmlinux.sh           | 29 +++++++++++++++++++++++++++++
 scripts/recordmcount.c            |  3 ++-
 10 files changed, 68 insertions(+), 5 deletions(-)

diff --git a/Makefile b/Makefile
index 161ad0d1f77f..3a7e5e5c17b9 100644
--- a/Makefile
+++ b/Makefile
@@ -861,7 +861,7 @@ KBUILD_AFLAGS	+= $(CC_FLAGS_USING)
 ifdef CONFIG_DYNAMIC_FTRACE
 	ifdef CONFIG_HAVE_C_RECORDMCOUNT
 		BUILD_C_RECORDMCOUNT := y
-		export BUILD_C_RECORDMCOUNT
+		export BUILD_C_RECORDMCOUNT RECORDMCOUNT_WARN
 	endif
 endif
 endif
diff --git a/arch/Kconfig b/arch/Kconfig
index 87488fe1e6b8..85b2044b927d 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -598,7 +598,7 @@ config LTO_CLANG
 	depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
 	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
 	depends on ARCH_SUPPORTS_LTO_CLANG
-	depends on !FTRACE_MCOUNT_RECORD
+	depends on !FTRACE_MCOUNT_RECORD || HAVE_C_RECORDMCOUNT
 	depends on !KASAN
 	select LTO
 	help
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 78079000c05a..a1c902b808d0 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -565,6 +565,7 @@
 		*(.text.hot TEXT_MAIN .text.fixup .text.unlikely)	\
 		NOINSTR_TEXT						\
 		*(.text..refcount)					\
+		*(.text..nomcount)					\
 		*(.ref.text)						\
 	MEM_KEEP(init.text*)						\
 	MEM_KEEP(exit.text*)						\
diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h
index ee37256ec8bd..fd78475c0642 100644
--- a/include/linux/compiler-clang.h
+++ b/include/linux/compiler-clang.h
@@ -55,3 +55,7 @@
 #if __has_feature(shadow_call_stack)
 # define __noscs	__attribute__((__no_sanitize__("shadow-call-stack")))
 #endif
+
+#if defined(CONFIG_LTO_CLANG) && defined(CONFIG_FTRACE_MCOUNT_RECORD)
+#define __nomcount	__attribute__((__section__(".text..nomcount")))
+#endif
diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h
index e368384445b6..1470c9703a25 100644
--- a/include/linux/compiler_types.h
+++ b/include/linux/compiler_types.h
@@ -233,6 +233,10 @@ struct ftrace_likely_data {
 # define __noscs
 #endif
 
+#ifndef __nomcount
+# define __nomcount
+#endif
+
 #ifndef asm_volatile_goto
 #define asm_volatile_goto(x...) asm goto(x)
 #endif
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 1903b80db6eb..8e3ddb8123d9 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6062,6 +6062,7 @@ static int ftrace_cmp_ips(const void *a, const void *b)
 	return 0;
 }
 
+__nomcount
 static int ftrace_process_locs(struct module *mod,
 			       unsigned long *start,
 			       unsigned long *end)
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 5c0bbb6ddfcf..64e99f4baa5b 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -187,6 +187,9 @@ endif
 
 ifdef CONFIG_FTRACE_MCOUNT_RECORD
 ifndef CC_USING_RECORD_MCOUNT
+ifndef CC_USING_PATCHABLE_FUNCTION_ENTRY
+# With LTO, we postpone recordmcount until we compile a native binary
+ifndef CONFIG_LTO_CLANG
 # compiler will not generate __mcount_loc use recordmcount or recordmcount.pl
 ifdef BUILD_C_RECORDMCOUNT
 ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
@@ -200,6 +203,8 @@ sub_cmd_record_mcount =					\
 	if [ $(@) != "scripts/mod/empty.o" ]; then	\
 		$(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)";	\
 	fi;
+endif # CONFIG_LTO_CLANG
+
 recordmcount_source := $(srctree)/scripts/recordmcount.c \
 		    $(srctree)/scripts/recordmcount.h
 else
@@ -209,11 +214,15 @@ sub_cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
 	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)" \
 	"$(LD) $(KBUILD_LDFLAGS)" "$(NM)" "$(RM)" "$(MV)" \
 	"$(if $(part-of-module),1,0)" "$(@)";
+
 recordmcount_source := $(srctree)/scripts/recordmcount.pl
 endif # BUILD_C_RECORDMCOUNT
+ifndef CONFIG_LTO_CLANG
 cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)),	\
 	$(sub_cmd_record_mcount))
+endif # CONFIG_LTO_CLANG
 endif # CC_USING_RECORD_MCOUNT
+endif # CC_USING_PATCHABLE_FUNCTION_ENTRY
 endif # CONFIG_FTRACE_MCOUNT_RECORD
 
 ifdef CONFIG_STACK_VALIDATION
diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index 1005b147abd0..d168f0cfe67c 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -34,10 +34,24 @@ ifdef CONFIG_LTO_CLANG
 # With CONFIG_LTO_CLANG, reuse the object file we compiled for modpost to
 # avoid a second slow LTO link
 prelink-ext := .lto
-endif
+
+# ELF processing was skipped earlier because we didn't have native code,
+# so let's now process the prelinked binary before we link the module.
+
+ifdef CONFIG_FTRACE_MCOUNT_RECORD
+ifndef CC_USING_RECORD_MCOUNT
+ifndef CC_USING_PATCHABLE_FUNCTION_ENTRY
+cmd_ld_ko_o += $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS)	\
+			$(@:.ko=$(prelink-ext).o);
+
+endif # CC_USING_PATCHABLE_FUNCTION_ENTRY
+endif # CC_USING_RECORD_MCOUNT
+endif # CONFIG_FTRACE_MCOUNT_RECORD
+
+endif # CONFIG_LTO_CLANG
 
 quiet_cmd_ld_ko_o = LD [M]  $@
-      cmd_ld_ko_o =                                                     \
+      cmd_ld_ko_o +=                                                    \
 	$(LD) -r $(KBUILD_LDFLAGS)					\
 		$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)		\
 		$(addprefix -T , $(KBUILD_LDS_MODULE))			\
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 69a6d7254e28..c72f5d0238f1 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -108,6 +108,29 @@ objtool_link()
 	fi
 }
 
+# If CONFIG_LTO_CLANG is selected, we postpone running recordmcount until
+# we have compiled LLVM IR to an object file.
+recordmcount()
+{
+	if [ "${CONFIG_LTO_CLANG} ${CONFIG_FTRACE_MCOUNT_RECORD}" != "y y" ]; then
+		return
+	fi
+
+	if [ -n "${CC_USING_RECORD_MCOUNT}" ]; then
+		return
+	fi
+	if [ -n "${CC_USING_PATCHABLE_FUNCTION_ENTRY}" ]; then
+		return
+	fi
+
+	local flags=""
+
+	[ -n "${RECORDMCOUNT_WARN}" ] && flags="-w"
+
+	info MCOUNT $*
+	${objtree}/scripts/recordmcount ${flags} $*
+}
+
 # Link of vmlinux
 # ${1} - output file
 # ${2}, ${3}, ... - optional extra .o files
@@ -316,6 +339,12 @@ objtool_link vmlinux.o
 # modpost vmlinux.o to check for section mismatches
 ${MAKE} -f "${srctree}/scripts/Makefile.modpost" MODPOST_VMLINUX=1
 
+if [ -n "${CONFIG_LTO_CLANG}" ]; then
+	# If we postponed ELF processing steps due to LTO, process
+	# vmlinux.o instead.
+	recordmcount vmlinux.o
+fi
+
 info MODINFO modules.builtin.modinfo
 ${OBJCOPY} -j .modinfo -O binary vmlinux.o modules.builtin.modinfo
 info GEN modules.builtin
diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c
index 7225107a9aaf..9e9f10b4d649 100644
--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -404,7 +404,8 @@ static uint32_t (*w2)(uint16_t);
 /* Names of the sections that could contain calls to mcount. */
 static int is_mcounted_section_name(char const *const txtname)
 {
-	return strncmp(".text",          txtname, 5) == 0 ||
+	return (strncmp(".text",           txtname, 5) == 0 &&
+		 strcmp(".text..nomcount", txtname) != 0) ||
 		strcmp(".init.text",     txtname) == 0 ||
 		strcmp(".ref.text",      txtname) == 0 ||
 		strcmp(".sched.text",    txtname) == 0 ||
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 05/22] kbuild: lto: postpone objtool
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (3 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 04/22] kbuild: lto: fix recordmcount Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 21:19   ` Peter Zijlstra
  2020-06-24 20:31 ` [PATCH 06/22] kbuild: lto: limit inlining Sami Tolvanen
                   ` (20 subsequent siblings)
  25 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

With LTO, LLVM bitcode won't be compiled into native code until
modpost_link, or modfinal for modules. This change postpones calls
to objtool until after these steps.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 include/linux/compiler.h  |  2 +-
 lib/Kconfig.debug         |  2 +-
 scripts/Makefile.build    |  2 ++
 scripts/Makefile.modfinal | 15 +++++++++++++++
 4 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 30827f82ad62..12b115152532 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -120,7 +120,7 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
 /* Annotate a C jump table to allow objtool to follow the code flow */
 #define __annotate_jump_table __section(.rodata..c_jump_table)
 
-#ifdef CONFIG_DEBUG_ENTRY
+#if defined(CONFIG_DEBUG_ENTRY) || defined(CONFIG_LTO_CLANG)
 /* Begin/end of an instrumentation safe region */
 #define instrumentation_begin() ({					\
 	asm volatile("%c0:\n\t"						\
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 9ad9210d70a1..9fdba71c135a 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -399,7 +399,7 @@ config STACK_VALIDATION
 
 config VMLINUX_VALIDATION
 	bool
-	depends on STACK_VALIDATION && DEBUG_ENTRY && !PARAVIRT
+	depends on STACK_VALIDATION && (DEBUG_ENTRY || LTO_CLANG) && !PARAVIRT
 	default y
 
 config DEBUG_FORCE_WEAK_PER_CPU
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 64e99f4baa5b..82977350f5a6 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -226,6 +226,7 @@ endif # CC_USING_PATCHABLE_FUNCTION_ENTRY
 endif # CONFIG_FTRACE_MCOUNT_RECORD
 
 ifdef CONFIG_STACK_VALIDATION
+ifndef CONFIG_LTO_CLANG
 ifneq ($(SKIP_STACK_VALIDATION),1)
 
 __objtool_obj := $(objtree)/tools/objtool/objtool
@@ -258,6 +259,7 @@ objtool_obj = $(if $(patsubst y%,, \
 	$(__objtool_obj))
 
 endif # SKIP_STACK_VALIDATION
+endif # CONFIG_LTO_CLANG
 endif # CONFIG_STACK_VALIDATION
 
 # Rebuild all objects when objtool changes, or is enabled/disabled.
diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index d168f0cfe67c..9f1df2f1fab5 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -48,6 +48,21 @@ endif # CC_USING_PATCHABLE_FUNCTION_ENTRY
 endif # CC_USING_RECORD_MCOUNT
 endif # CONFIG_FTRACE_MCOUNT_RECORD
 
+ifdef CONFIG_STACK_VALIDATION
+ifneq ($(SKIP_STACK_VALIDATION),1)
+cmd_ld_ko_o +=								\
+	$(objtree)/tools/objtool/objtool				\
+		$(if $(CONFIG_UNWINDER_ORC),orc generate,check)		\
+		--module						\
+		$(if $(CONFIG_FRAME_POINTER),,--no-fp)			\
+		$(if $(CONFIG_GCOV_KERNEL),--no-unreachable,)		\
+		$(if $(CONFIG_RETPOLINE),--retpoline,)			\
+		$(if $(CONFIG_X86_SMAP),--uaccess,)			\
+		$(@:.ko=$(prelink-ext).o);
+
+endif # SKIP_STACK_VALIDATION
+endif # CONFIG_STACK_VALIDATION
+
 endif # CONFIG_LTO_CLANG
 
 quiet_cmd_ld_ko_o = LD [M]  $@
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 06/22] kbuild: lto: limit inlining
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (4 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 05/22] kbuild: lto: postpone objtool Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 21:20   ` Peter Zijlstra
  2020-06-24 20:31 ` [PATCH 07/22] kbuild: lto: merge module sections Sami Tolvanen
                   ` (19 subsequent siblings)
  25 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen, George Burgess IV

This change limits function inlining across translation unit
boundaries in order to reduce the binary size with LTO.

The -import-instr-limit flag defines a size limit, as the number
of LLVM IR instructions, for importing functions from other TUs.
The default value is 100, and decreasing it to 5 reduces the size
of a stripped arm64 defconfig vmlinux by 11%.

Suggested-by: George Burgess IV <gbiv@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 Makefile | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Makefile b/Makefile
index 3a7e5e5c17b9..ee66513a5b66 100644
--- a/Makefile
+++ b/Makefile
@@ -894,6 +894,10 @@ else
 CC_FLAGS_LTO_CLANG := -flto
 endif
 CC_FLAGS_LTO_CLANG += -fvisibility=default
+
+# Limit inlining across translation units to reduce binary size
+LD_FLAGS_LTO_CLANG := -mllvm -import-instr-limit=5
+KBUILD_LDFLAGS += $(LD_FLAGS_LTO_CLANG)
 endif
 
 ifdef CONFIG_LTO
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 07/22] kbuild: lto: merge module sections
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (5 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 06/22] kbuild: lto: limit inlining Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 21:01   ` Nick Desaulniers
  2020-06-24 20:31 ` [PATCH 08/22] kbuild: lto: remove duplicate dependencies from .mod files Sami Tolvanen
                   ` (18 subsequent siblings)
  25 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

LLD always splits sections with LTO, which increases module sizes. This
change adds a linker script that merges the split sections in the final
module and discards the .eh_frame section that LLD may generate.

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 Makefile               |  2 ++
 scripts/module-lto.lds | 26 ++++++++++++++++++++++++++
 2 files changed, 28 insertions(+)
 create mode 100644 scripts/module-lto.lds

diff --git a/Makefile b/Makefile
index ee66513a5b66..9ffec5fe1737 100644
--- a/Makefile
+++ b/Makefile
@@ -898,6 +898,8 @@ CC_FLAGS_LTO_CLANG += -fvisibility=default
 # Limit inlining across translation units to reduce binary size
 LD_FLAGS_LTO_CLANG := -mllvm -import-instr-limit=5
 KBUILD_LDFLAGS += $(LD_FLAGS_LTO_CLANG)
+
+KBUILD_LDS_MODULE += $(srctree)/scripts/module-lto.lds
 endif
 
 ifdef CONFIG_LTO
diff --git a/scripts/module-lto.lds b/scripts/module-lto.lds
new file mode 100644
index 000000000000..65884c652bf2
--- /dev/null
+++ b/scripts/module-lto.lds
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * With CONFIG_LTO_CLANG, LLD always enables -fdata-sections and
+ * -ffunction-sections, which increases the size of the final module.
+ * Merge the split sections in the final binary.
+ */
+SECTIONS {
+	__patchable_function_entries : { *(__patchable_function_entries) }
+
+	.bss : {
+		*(.bss .bss.[0-9a-zA-Z_]*)
+		*(.bss..L* .bss..compoundliteral*)
+	}
+
+	.data : {
+		*(.data .data.[0-9a-zA-Z_]*)
+		*(.data..L* .data..compoundliteral*)
+	}
+
+	.rodata : {
+		*(.rodata .rodata.[0-9a-zA-Z_]*)
+		*(.rodata..L* .rodata..compoundliteral*)
+	}
+
+	.text : { *(.text .text.[0-9a-zA-Z_]*) }
+}
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 08/22] kbuild: lto: remove duplicate dependencies from .mod files
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (6 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 07/22] kbuild: lto: merge module sections Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 21:13   ` Nick Desaulniers
  2020-06-24 20:31 ` [PATCH 09/22] init: lto: ensure initcall ordering Sami Tolvanen
                   ` (17 subsequent siblings)
  25 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

With LTO, llvm-nm prints out symbols for each archive member
separately, which results in a lot of duplicate dependencies in the
.mod file when CONFIG_TRIM_UNUSED_SYMS is enabled. When a module
consists of several compilation units, the output can exceed the
default xargs command size limit and split the dependency list to
multiple lines, which results in used symbols getting trimmed.

This change removes duplicate dependencies, which will reduce the
probability of this happening and makes .mod files smaller and
easier to read.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 scripts/Makefile.build | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 82977350f5a6..82b465ce3ca0 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -291,7 +291,7 @@ endef
 
 # List module undefined symbols (or empty line if not enabled)
 ifdef CONFIG_TRIM_UNUSED_KSYMS
-cmd_undef_syms = $(NM) $< | sed -n 's/^  *U //p' | xargs echo
+cmd_undef_syms = $(NM) $< | sed -n 's/^  *U //p' | sort -u | xargs echo
 else
 cmd_undef_syms = echo
 endif
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 09/22] init: lto: ensure initcall ordering
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (7 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 08/22] kbuild: lto: remove duplicate dependencies from .mod files Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-25  0:58   ` kernel test robot
  2020-06-25  4:19   ` kernel test robot
  2020-06-24 20:31 ` [PATCH 10/22] init: lto: fix PREL32 relocations Sami Tolvanen
                   ` (16 subsequent siblings)
  25 siblings, 2 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

With LTO, the compiler doesn't necessarily obey the link order for
initcalls, and initcall variables need globally unique names to avoid
collisions at link time.

This change exports __KBUILD_MODNAME and adds the initcall_id() macro,
which uses it together with __COUNTER__ and __LINE__ to help ensure
these variables have unique names, and moves each variable to its own
section when LTO is enabled, so the correct order can be specified using
a linker script.

The generate_initcall_ordering.pl script uses nm to find initcalls from
the object files passed to the linker, and generates a linker script
that specifies the intended order. With LTO, the script is called in
link-vmlinux.sh.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 include/linux/init.h               |  52 +++++-
 scripts/Makefile.lib               |   6 +-
 scripts/generate_initcall_order.pl | 270 +++++++++++++++++++++++++++++
 scripts/link-vmlinux.sh            |  14 ++
 4 files changed, 333 insertions(+), 9 deletions(-)
 create mode 100755 scripts/generate_initcall_order.pl

diff --git a/include/linux/init.h b/include/linux/init.h
index 212fc9e2f691..af638cd6dd52 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -184,19 +184,57 @@ extern bool initcall_debug;
  * as KEEP() in the linker script.
  */
 
+/* Format: <modname>__<counter>_<line>_<fn> */
+#define __initcall_id(fn)					\
+	__PASTE(__KBUILD_MODNAME,				\
+	__PASTE(__,						\
+	__PASTE(__COUNTER__,					\
+	__PASTE(_,						\
+	__PASTE(__LINE__,					\
+	__PASTE(_, fn))))))
+
+/* Format: __<prefix>__<iid><id> */
+#define __initcall_name(prefix, __iid, id)			\
+	__PASTE(__,						\
+	__PASTE(prefix,						\
+	__PASTE(__,						\
+	__PASTE(__iid, id))))
+
+#ifdef CONFIG_LTO_CLANG
+/*
+ * With LTO, the compiler doesn't necessarily obey link order for
+ * initcalls. In order to preserve the correct order, we add each
+ * variable into its own section and generate a linker script (in
+ * scripts/link-vmlinux.sh) to specify the order of the sections.
+ */
+#define __initcall_section(__sec, __iid)			\
+	#__sec ".init.." #__iid
+#else
+#define __initcall_section(__sec, __iid)			\
+	#__sec ".init"
+#endif
+
 #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
-#define ___define_initcall(fn, id, __sec)			\
+#define ____define_initcall(fn, __name, __sec)			\
 	__ADDRESSABLE(fn)					\
-	asm(".section	\"" #__sec ".init\", \"a\"	\n"	\
-	"__initcall_" #fn #id ":			\n"	\
+	asm(".section	\"" __sec "\", \"a\"		\n"	\
+	    __stringify(__name) ":			\n"	\
 	    ".long	" #fn " - .			\n"	\
 	    ".previous					\n");
 #else
-#define ___define_initcall(fn, id, __sec) \
-	static initcall_t __initcall_##fn##id __used \
-		__attribute__((__section__(#__sec ".init"))) = fn;
+#define ____define_initcall(fn, __name, __sec)			\
+	static initcall_t __name __used 			\
+		__attribute__((__section__(__sec))) = fn;
 #endif
 
+#define __unique_initcall(fn, id, __sec, __iid)			\
+	____define_initcall(fn,					\
+		__initcall_name(initcall, __iid, id),		\
+		__initcall_section(__sec, __iid))
+
+#define ___define_initcall(fn, id, __sec)			\
+	__unique_initcall(fn, id, __sec, __initcall_id(fn))
+
 #define __define_initcall(fn, id) ___define_initcall(fn, id, .initcall##id)
 
 /*
@@ -236,7 +274,7 @@ extern bool initcall_debug;
 #define __exitcall(fn)						\
 	static exitcall_t __exitcall_##fn __exit_call = fn
 
-#define console_initcall(fn)	___define_initcall(fn,, .con_initcall)
+#define console_initcall(fn)	___define_initcall(fn, con, .con_initcall)
 
 struct obs_kernel_param {
 	const char *str;
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 99ac59c59826..17447354b543 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -106,9 +106,11 @@ target-stem = $(basename $(patsubst $(obj)/%,%,$@))
 # These flags are needed for modversions and compiling, so we define them here
 # $(modname_flags) defines KBUILD_MODNAME as the name of the module it will
 # end up in (or would, if it gets compiled in)
-name-fix = $(call stringify,$(subst $(comma),_,$(subst -,_,$1)))
+name-fix-token = $(subst $(comma),_,$(subst -,_,$1))
+name-fix = $(call stringify,$(call name-fix-token,$1))
 basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
-modname_flags  = -DKBUILD_MODNAME=$(call name-fix,$(modname))
+modname_flags  = -DKBUILD_MODNAME=$(call name-fix,$(modname)) \
+		 -D__KBUILD_MODNAME=$(call name-fix-token,$(modname))
 modfile_flags  = -DKBUILD_MODFILE=$(call stringify,$(modfile))
 
 orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) \
diff --git a/scripts/generate_initcall_order.pl b/scripts/generate_initcall_order.pl
new file mode 100755
index 000000000000..fe83aec2b51e
--- /dev/null
+++ b/scripts/generate_initcall_order.pl
@@ -0,0 +1,270 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+#
+# Generates a linker script that specifies the correct initcall order.
+#
+# Copyright (C) 2019 Google LLC
+
+use strict;
+use warnings;
+use IO::Handle;
+use IO::Select;
+use POSIX ":sys_wait_h";
+
+my $nm = $ENV{'NM'} || die "$0: ERROR: NM not set?";
+my $objtree = $ENV{'objtree'} || '.';
+
+## currently active child processes
+my $jobs = {};		# child process pid -> file handle
+## results from child processes
+my $results = {};	# object index -> [ { level, secname }, ... ]
+
+## reads _NPROCESSORS_ONLN to determine the maximum number of processes to
+## start
+sub get_online_processors {
+	open(my $fh, "getconf _NPROCESSORS_ONLN 2>/dev/null |")
+		or die "$0: ERROR: failed to execute getconf: $!";
+	my $procs = <$fh>;
+	close($fh);
+
+	if (!($procs =~ /^\d+$/)) {
+		return 1;
+	}
+
+	return int($procs);
+}
+
+## writes results to the parent process
+## format: <file index> <initcall level> <base initcall section name>
+sub write_results {
+	my ($index, $initcalls) = @_;
+
+	# sort by the counter value to ensure the order of initcalls within
+	# each object file is correct
+	foreach my $counter (sort { $a <=> $b } keys(%{$initcalls})) {
+		my $level = $initcalls->{$counter}->{'level'};
+
+		# section name for the initcall function
+		my $secname = $initcalls->{$counter}->{'module'} . '__' .
+			      $counter . '_' .
+			      $initcalls->{$counter}->{'line'} . '_' .
+			      $initcalls->{$counter}->{'function'};
+
+		print "$index $level $secname\n";
+	}
+}
+
+## reads a result line from a child process and adds it to the $results array
+sub read_results{
+	my ($fh) = @_;
+
+	# each child prints out a full line w/ autoflush and exits after the
+	# last line, so even if buffered I/O blocks here, it shouldn't block
+	# very long
+	my $data = <$fh>;
+
+	if (!defined($data)) {
+		return 0;
+	}
+
+	chomp($data);
+
+	my ($index, $level, $secname) = $data =~
+		/^(\d+)\ ([^\ ]+)\ (.*)$/;
+
+	if (!defined($index) ||
+		!defined($level) ||
+		!defined($secname)) {
+		die "$0: ERROR: child process returned invalid data: $data\n";
+	}
+
+	$index = int($index);
+
+	if (!exists($results->{$index})) {
+		$results->{$index} = [];
+	}
+
+	push (@{$results->{$index}}, {
+		'level'   => $level,
+		'secname' => $secname
+	});
+
+	return 1;
+}
+
+## finds initcalls from an object file or all object files in an archive, and
+## writes results back to the parent process
+sub find_initcalls {
+	my ($index, $file) = @_;
+
+	die "$0: ERROR: file $file doesn't exist?" if (! -f $file);
+
+	open(my $fh, "\"$nm\" --defined-only \"$file\" 2>/dev/null |")
+		or die "$0: ERROR: failed to execute \"$nm\": $!";
+
+	my $initcalls = {};
+
+	while (<$fh>) {
+		chomp;
+
+		# check for the start of a new object file (if processing an
+		# archive)
+		my ($path)= $_ =~ /^(.+)\:$/;
+
+		if (defined($path)) {
+			write_results($index, $initcalls);
+			$initcalls = {};
+			next;
+		}
+
+		# look for an initcall
+		my ($module, $counter, $line, $symbol) = $_ =~
+			/[a-z]\s+__initcall__(\S*)__(\d+)_(\d+)_(.*)$/;
+
+		if (!defined($module)) {
+			$module = ''
+		}
+
+		if (!defined($counter) ||
+			!defined($line) ||
+			!defined($symbol)) {
+			next;
+		}
+
+		# parse initcall level
+		my ($function, $level) = $symbol =~
+			/^(.*)((early|rootfs|con|[0-9])s?)$/;
+
+		die "$0: ERROR: invalid initcall name $symbol in $file($path)"
+			if (!defined($function) || !defined($level));
+
+		$initcalls->{$counter} = {
+			'module'   => $module,
+			'line'     => $line,
+			'function' => $function,
+			'level'    => $level,
+		};
+	}
+
+	close($fh);
+	write_results($index, $initcalls);
+}
+
+## waits for any child process to complete, reads the results, and adds them to
+## the $results array for later processing
+sub wait_for_results {
+	my ($select) = @_;
+
+	my $pid = 0;
+	do {
+		# unblock children that may have a full write buffer
+		foreach my $fh ($select->can_read(0)) {
+			read_results($fh);
+		}
+
+		# check for children that have exited, read the remaining data
+		# from them, and clean up
+		$pid = waitpid(-1, WNOHANG);
+		if ($pid > 0) {
+			if (!exists($jobs->{$pid})) {
+				next;
+			}
+
+			my $fh = $jobs->{$pid};
+			$select->remove($fh);
+
+			while (read_results($fh)) {
+				# until eof
+			}
+
+			close($fh);
+			delete($jobs->{$pid});
+		}
+	} while ($pid > 0);
+}
+
+## forks a child to process each file passed in the command line and collects
+## the results
+sub process_files {
+	my $index = 0;
+	my $njobs = get_online_processors();
+	my $select = IO::Select->new();
+
+	while (my $file = shift(@ARGV)) {
+		# fork a child process and read it's stdout
+		my $pid = open(my $fh, '-|');
+
+		if (!defined($pid)) {
+			die "$0: ERROR: failed to fork: $!";
+		} elsif ($pid) {
+			# save the child process pid and the file handle
+			$select->add($fh);
+			$jobs->{$pid} = $fh;
+		} else {
+			# in the child process
+			STDOUT->autoflush(1);
+			find_initcalls($index, "$objtree/$file");
+			exit;
+		}
+
+		$index++;
+
+		# limit the number of children to $njobs
+		if (scalar(keys(%{$jobs})) >= $njobs) {
+			wait_for_results($select);
+		}
+	}
+
+	# wait for the remaining children to complete
+	while (scalar(keys(%{$jobs})) > 0) {
+		wait_for_results($select);
+	}
+}
+
+sub generate_initcall_lds() {
+	process_files();
+
+	my $sections = {};	# level -> [ secname, ...]
+
+	# sort results to retain link order and split to sections per
+	# initcall level
+	foreach my $index (sort { $a <=> $b } keys(%{$results})) {
+		foreach my $result (@{$results->{$index}}) {
+			my $level = $result->{'level'};
+
+			if (!exists($sections->{$level})) {
+				$sections->{$level} = [];
+			}
+
+			push(@{$sections->{$level}}, $result->{'secname'});
+		}
+	}
+
+	die "$0: ERROR: no initcalls?" if (!keys(%{$sections}));
+
+	# print out a linker script that defines the order of initcalls for
+	# each level
+	print "SECTIONS {\n";
+
+	foreach my $level (sort(keys(%{$sections}))) {
+		my $section;
+
+		if ($level eq 'con') {
+			$section = '.con_initcall.init';
+		} else {
+			$section = ".initcall${level}.init";
+		}
+
+		print "\t${section} : {\n";
+
+		foreach my $secname (@{$sections->{$level}}) {
+			print "\t\t*(${section}..${secname}) ;\n";
+		}
+
+		print "\t}\n";
+	}
+
+	print "}\n";
+}
+
+generate_initcall_lds();
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index c72f5d0238f1..42c73e24e820 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -39,6 +39,16 @@ info()
 	fi
 }
 
+# Generate a linker script to ensure correct ordering of initcalls.
+gen_initcalls()
+{
+	info GEN .tmp_initcalls.lds
+
+	${srctree}/scripts/generate_initcall_order.pl \
+		${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS} \
+		> .tmp_initcalls.lds
+}
+
 # If CONFIG_LTO_CLANG is selected, collect generated symbol versions into
 # .tmp_symversions.lds
 gen_symversions()
@@ -70,6 +80,9 @@ modpost_link()
 		--end-group"
 
 	if [ -n "${CONFIG_LTO_CLANG}" ]; then
+		gen_initcalls
+		lds="-T .tmp_initcalls.lds"
+
 		if [ -n "${CONFIG_MODVERSIONS}" ]; then
 			gen_symversions
 			lds="${lds} -T .tmp_symversions.lds"
@@ -283,6 +296,7 @@ cleanup()
 {
 	rm -f .btf.*
 	rm -f .tmp_System.map
+	rm -f .tmp_initcalls.lds
 	rm -f .tmp_symversions.lds
 	rm -f .tmp_vmlinux*
 	rm -f System.map
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 10/22] init: lto: fix PREL32 relocations
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (8 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 09/22] init: lto: ensure initcall ordering Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 11/22] pci: " Sami Tolvanen
                   ` (15 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

With LTO, the compiler can rename static functions to avoid global
naming collisions. As initcall functions are typically static,
renaming can break references to them in inline assembly. This
change adds a global stub with a stable name for each initcall to
fix the issue when PREL32 relocations are used.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 include/linux/init.h | 30 ++++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/include/linux/init.h b/include/linux/init.h
index af638cd6dd52..5b4bdc5a8399 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -209,26 +209,48 @@ extern bool initcall_debug;
  */
 #define __initcall_section(__sec, __iid)			\
 	#__sec ".init.." #__iid
+
+/*
+ * With LTO, the compiler can rename static functions to avoid
+ * global naming collisions. We use a global stub function for
+ * initcalls to create a stable symbol name whose address can be
+ * taken in inline assembly when PREL32 relocations are used.
+ */
+#define __initcall_stub(fn, __iid, id)				\
+	__initcall_name(initstub, __iid, id)
+
+#define __define_initcall_stub(__stub, fn)			\
+	int __init __stub(void)					\
+	{ 							\
+		return fn();					\
+	}							\
+	__ADDRESSABLE(__stub)
 #else
 #define __initcall_section(__sec, __iid)			\
 	#__sec ".init"
+
+#define __initcall_stub(fn, __iid, id)	fn
+
+#define __define_initcall_stub(__stub, fn)			\
+	__ADDRESSABLE(fn)
 #endif
 
 #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
-#define ____define_initcall(fn, __name, __sec)			\
-	__ADDRESSABLE(fn)					\
+#define ____define_initcall(fn, __stub, __name, __sec)		\
+	__define_initcall_stub(__stub, fn)			\
 	asm(".section	\"" __sec "\", \"a\"		\n"	\
 	    __stringify(__name) ":			\n"	\
-	    ".long	" #fn " - .			\n"	\
+	    ".long	" __stringify(__stub) " - .	\n"	\
 	    ".previous					\n");
 #else
-#define ____define_initcall(fn, __name, __sec)			\
+#define ____define_initcall(fn, __unused, __name, __sec)	\
 	static initcall_t __name __used 			\
 		__attribute__((__section__(__sec))) = fn;
 #endif
 
 #define __unique_initcall(fn, id, __sec, __iid)			\
 	____define_initcall(fn,					\
+		__initcall_stub(fn, __iid, id),			\
 		__initcall_name(initcall, __iid, id),		\
 		__initcall_section(__sec, __iid))
 
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 11/22] pci: lto: fix PREL32 relocations
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (9 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 10/22] init: lto: fix PREL32 relocations Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 22:49   ` kernel test robot
  2020-07-17 20:26   ` Bjorn Helgaas
  2020-06-24 20:31 ` [PATCH 12/22] modpost: lto: strip .lto from module names Sami Tolvanen
                   ` (14 subsequent siblings)
  25 siblings, 2 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

With LTO, the compiler can rename static functions to avoid global
naming collisions. As PCI fixup functions are typically static,
renaming can break references to them in inline assembly. This
change adds a global stub to DECLARE_PCI_FIXUP_SECTION to fix the
issue when PREL32 relocations are used.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 include/linux/pci.h | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/include/linux/pci.h b/include/linux/pci.h
index c79d83304e52..1e65e16f165a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1909,19 +1909,24 @@ enum pci_fixup_pass {
 };
 
 #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
-#define __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
-				    class_shift, hook)			\
-	__ADDRESSABLE(hook)						\
+#define ___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
+				    class_shift, hook, stub)		\
+	void stub(struct pci_dev *dev) { hook(dev); }			\
 	asm(".section "	#sec ", \"a\"				\n"	\
 	    ".balign	16					\n"	\
 	    ".short "	#vendor ", " #device "			\n"	\
 	    ".long "	#class ", " #class_shift "		\n"	\
-	    ".long "	#hook " - .				\n"	\
+	    ".long "	#stub " - .				\n"	\
 	    ".previous						\n");
+
+#define __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
+				  class_shift, hook, stub)		\
+	___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
+				  class_shift, hook, stub)
 #define DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
 				  class_shift, hook)			\
 	__DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
-				  class_shift, hook)
+				  class_shift, hook, __UNIQUE_ID(hook))
 #else
 /* Anonymous variables would be nice... */
 #define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class,	\
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 12/22] modpost: lto: strip .lto from module names
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (10 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 11/22] pci: " Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 22:05   ` Nick Desaulniers
  2020-06-24 20:31 ` [PATCH 13/22] scripts/mod: disable LTO for empty.c Sami Tolvanen
                   ` (13 subsequent siblings)
  25 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen, Bill Wendling

With LTO, everything is compiled into LLVM bitcode, so we have to link
each module into native code before modpost. Kbuild uses the .lto.o
suffix for these files, which also ends up in module information. This
change strips the unnecessary .lto suffix from the module name.

Suggested-by: Bill Wendling <morbo@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 scripts/mod/modpost.c    | 16 +++++++---------
 scripts/mod/modpost.h    |  9 +++++++++
 scripts/mod/sumversion.c |  6 +++++-
 3 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 6aea65c65745..8352f8a1a138 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -17,7 +17,6 @@
 #include <ctype.h>
 #include <string.h>
 #include <limits.h>
-#include <stdbool.h>
 #include <errno.h>
 #include "modpost.h"
 #include "../../include/linux/license.h"
@@ -80,14 +79,6 @@ modpost_log(enum loglevel loglevel, const char *fmt, ...)
 		exit(1);
 }
 
-static inline bool strends(const char *str, const char *postfix)
-{
-	if (strlen(str) < strlen(postfix))
-		return false;
-
-	return strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
-}
-
 void *do_nofail(void *ptr, const char *expr)
 {
 	if (!ptr)
@@ -1975,6 +1966,10 @@ static char *remove_dot(char *s)
 		size_t m = strspn(s + n + 1, "0123456789");
 		if (m && (s[n + m] == '.' || s[n + m] == 0))
 			s[n] = 0;
+
+		/* strip trailing .lto */
+		if (strends(s, ".lto"))
+			s[strlen(s) - 4] = '\0';
 	}
 	return s;
 }
@@ -1998,6 +1993,9 @@ static void read_symbols(const char *modname)
 		/* strip trailing .o */
 		tmp = NOFAIL(strdup(modname));
 		tmp[strlen(tmp) - 2] = '\0';
+		/* strip trailing .lto */
+		if (strends(tmp, ".lto"))
+			tmp[strlen(tmp) - 4] = '\0';
 		mod = new_module(tmp);
 		free(tmp);
 	}
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index 3aa052722233..fab30d201f9e 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -2,6 +2,7 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <stdarg.h>
+#include <stdbool.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/stat.h>
@@ -180,6 +181,14 @@ static inline unsigned int get_secindex(const struct elf_info *info,
 	return info->symtab_shndx_start[sym - info->symtab_start];
 }
 
+static inline bool strends(const char *str, const char *postfix)
+{
+	if (strlen(str) < strlen(postfix))
+		return false;
+
+	return strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
+}
+
 /* file2alias.c */
 extern unsigned int cross_build;
 void handle_moddevtable(struct module *mod, struct elf_info *info,
diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c
index d587f40f1117..760e6baa7eda 100644
--- a/scripts/mod/sumversion.c
+++ b/scripts/mod/sumversion.c
@@ -391,10 +391,14 @@ void get_src_version(const char *modname, char sum[], unsigned sumlen)
 	struct md4_ctx md;
 	char *fname;
 	char filelist[PATH_MAX + 1];
+	int postfix_len = 1;
+
+	if (strends(modname, ".lto.o"))
+		postfix_len = 5;
 
 	/* objects for a module are listed in the first line of *.mod file. */
 	snprintf(filelist, sizeof(filelist), "%.*smod",
-		 (int)strlen(modname) - 1, modname);
+		 (int)strlen(modname) - postfix_len, modname);
 
 	buf = read_text_file(filelist);
 
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 13/22] scripts/mod: disable LTO for empty.c
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (11 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 12/22] modpost: lto: strip .lto from module names Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:57   ` Nick Desaulniers
  2020-06-24 20:31 ` [PATCH 14/22] efi/libstub: disable LTO Sami Tolvanen
                   ` (12 subsequent siblings)
  25 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

With CONFIG_LTO_CLANG, clang generates LLVM IR instead of ELF object
files. As empty.o is used for probing target properties, disable LTO
for it to produce an object file instead.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 scripts/mod/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/scripts/mod/Makefile b/scripts/mod/Makefile
index 296b6a3878b2..b6e3b40c6eeb 100644
--- a/scripts/mod/Makefile
+++ b/scripts/mod/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 OBJECT_FILES_NON_STANDARD := y
+CFLAGS_REMOVE_empty.o += $(CC_FLAGS_LTO)
 
 hostprogs	:= modpost mk_elfconfig
 always-y	:= $(hostprogs) empty.o
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 14/22] efi/libstub: disable LTO
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (12 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 13/22] scripts/mod: disable LTO for empty.c Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 15/22] drivers/misc/lkdtm: disable LTO for rodata.o Sami Tolvanen
                   ` (11 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

With CONFIG_LTO_CLANG, we produce LLVM bitcode instead of ELF object
files. Since LTO is not really needed here and the Makefile assumes we
produce an object file, disable LTO for libstub.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 drivers/firmware/efi/libstub/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index 75daaf20374e..95e12002cc7c 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -35,6 +35,8 @@ KBUILD_CFLAGS			:= $(cflags-y) -Os -DDISABLE_BRANCH_PROFILING \
 
 # remove SCS flags from all objects in this directory
 KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
+# disable LTO
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
 
 GCOV_PROFILE			:= n
 # Sanitizer runtimes are unavailable and cannot be linked here.
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 15/22] drivers/misc/lkdtm: disable LTO for rodata.o
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (13 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 14/22] efi/libstub: disable LTO Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 16/22] arm64: export CC_USING_PATCHABLE_FUNCTION_ENTRY Sami Tolvanen
                   ` (10 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

Disable LTO for rodata.o to allow objcopy to be used to
manipulate sections.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
---
 drivers/misc/lkdtm/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/misc/lkdtm/Makefile b/drivers/misc/lkdtm/Makefile
index c70b3822013f..dd4c936d4d73 100644
--- a/drivers/misc/lkdtm/Makefile
+++ b/drivers/misc/lkdtm/Makefile
@@ -13,6 +13,7 @@ lkdtm-$(CONFIG_LKDTM)		+= cfi.o
 
 KASAN_SANITIZE_stackleak.o	:= n
 KCOV_INSTRUMENT_rodata.o	:= n
+CFLAGS_REMOVE_rodata.o		+= $(CC_FLAGS_LTO)
 
 OBJCOPYFLAGS :=
 OBJCOPYFLAGS_rodata_objcopy.o	:= \
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 16/22] arm64: export CC_USING_PATCHABLE_FUNCTION_ENTRY
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (14 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 15/22] drivers/misc/lkdtm: disable LTO for rodata.o Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 17/22] arm64: vdso: disable LTO Sami Tolvanen
                   ` (9 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

Since arm64 does not use -pg in CC_FLAGS_FTRACE with
DYNAMIC_FTRACE_WITH_REGS, skip running recordmcount by
exporting CC_USING_PATCHABLE_FUNCTION_ENTRY.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/arm64/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index a0d94d063fa8..fc6c20a10291 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -115,6 +115,7 @@ endif
 ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_REGS),y)
   KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
   CC_FLAGS_FTRACE := -fpatchable-function-entry=2
+  export CC_USING_PATCHABLE_FUNCTION_ENTRY := 1
 endif
 
 # Default value
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 17/22] arm64: vdso: disable LTO
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (15 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 16/22] arm64: export CC_USING_PATCHABLE_FUNCTION_ENTRY Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:58   ` Nick Desaulniers
  2020-06-24 20:31 ` [PATCH 18/22] arm64: allow LTO_CLANG and THINLTO to be selected Sami Tolvanen
                   ` (8 subsequent siblings)
  25 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

Filter out CC_FLAGS_LTO for the vDSO.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/arm64/kernel/vdso/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index 556d424c6f52..cfad4c296ca1 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -29,8 +29,8 @@ ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \
 ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18
 ccflags-y += -DDISABLE_BRANCH_PROFILING
 
-CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS)
-KBUILD_CFLAGS			+= $(DISABLE_LTO)
+CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) \
+				$(CC_FLAGS_LTO)
 KASAN_SANITIZE			:= n
 UBSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 18/22] arm64: allow LTO_CLANG and THINLTO to be selected
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (16 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 17/22] arm64: vdso: disable LTO Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 19/22] x86, vdso: disable LTO only for vDSO Sami Tolvanen
                   ` (7 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

Allow CONFIG_LTO_CLANG and CONFIG_THINLTO to be enabled.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/arm64/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index a4a094bedcb2..e1961653964d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -72,6 +72,8 @@ config ARM64
 	select ARCH_USE_SYM_ANNOTATIONS
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 	select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
+	select ARCH_SUPPORTS_LTO_CLANG
+	select ARCH_SUPPORTS_THINLTO
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG)
 	select ARCH_SUPPORTS_NUMA_BALANCING
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 19/22] x86, vdso: disable LTO only for vDSO
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (17 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 18/22] arm64: allow LTO_CLANG and THINLTO to be selected Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 20/22] x86, ftrace: disable recordmcount for ftrace_make_nop Sami Tolvanen
                   ` (6 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

Remove the undefined DISABLE_LTO flag from the vDSO, and filter out
CC_FLAGS_LTO flags instead where needed.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/x86/entry/vdso/Makefile | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 04e65f0698f6..67f60662830a 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -9,8 +9,6 @@ ARCH_REL_TYPE_ABS := R_X86_64_JUMP_SLOT|R_X86_64_GLOB_DAT|R_X86_64_RELATIVE|
 ARCH_REL_TYPE_ABS += R_386_GLOB_DAT|R_386_JMP_SLOT|R_386_RELATIVE
 include $(srctree)/lib/vdso/Makefile
 
-KBUILD_CFLAGS += $(DISABLE_LTO)
-
 # Sanitizer runtimes are unavailable and cannot be linked here.
 KASAN_SANITIZE			:= n
 UBSAN_SANITIZE			:= n
@@ -92,7 +90,7 @@ ifneq ($(RETPOLINE_VDSO_CFLAGS),)
 endif
 endif
 
-$(vobjs): KBUILD_CFLAGS := $(filter-out $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS)) $(CFL)
+$(vobjs): KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO) $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS)) $(CFL)
 
 #
 # vDSO code runs in userspace and -pg doesn't help with profiling anyway.
@@ -150,6 +148,7 @@ KBUILD_CFLAGS_32 := $(filter-out -fno-pic,$(KBUILD_CFLAGS_32))
 KBUILD_CFLAGS_32 := $(filter-out -mfentry,$(KBUILD_CFLAGS_32))
 KBUILD_CFLAGS_32 := $(filter-out $(GCC_PLUGINS_CFLAGS),$(KBUILD_CFLAGS_32))
 KBUILD_CFLAGS_32 := $(filter-out $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS_32))
+KBUILD_CFLAGS_32 := $(filter-out $(CC_FLAGS_LTO),$(KBUILD_CFLAGS_32))
 KBUILD_CFLAGS_32 += -m32 -msoft-float -mregparm=0 -fpic
 KBUILD_CFLAGS_32 += $(call cc-option, -fno-stack-protector)
 KBUILD_CFLAGS_32 += $(call cc-option, -foptimize-sibling-calls)
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 20/22] x86, ftrace: disable recordmcount for ftrace_make_nop
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (18 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 19/22] x86, vdso: disable LTO only for vDSO Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:31 ` [PATCH 21/22] x86, relocs: Ignore L4_PAGE_OFFSET relocations Sami Tolvanen
                   ` (5 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

Ignore mcount relocations in ftrace_make_nop.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/x86/kernel/ftrace.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 51504566b3a6..c3b28b81277b 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -121,6 +121,7 @@ ftrace_modify_code_direct(unsigned long ip, const char *old_code,
 	return 0;
 }
 
+__nomcount
 int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned long ip = rec->ip;
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 21/22] x86, relocs: Ignore L4_PAGE_OFFSET relocations
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (19 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 20/22] x86, ftrace: disable recordmcount for ftrace_make_nop Sami Tolvanen
@ 2020-06-24 20:31 ` Sami Tolvanen
  2020-06-24 20:32 ` [PATCH 22/22] x86, build: allow LTO_CLANG and THINLTO to be selected Sami Tolvanen
                   ` (4 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:31 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

L4_PAGE_OFFSET is a constant value, so don't warn about absolute
relocations.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/x86/tools/relocs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index ce7188cbdae5..8f3bf34840ce 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -47,6 +47,7 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = {
 	[S_ABS] =
 	"^(xen_irq_disable_direct_reloc$|"
 	"xen_save_fl_direct_reloc$|"
+	"L4_PAGE_OFFSET|"
 	"VDSO|"
 	"__crc_)",
 
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH 22/22] x86, build: allow LTO_CLANG and THINLTO to be selected
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (20 preceding siblings ...)
  2020-06-24 20:31 ` [PATCH 21/22] x86, relocs: Ignore L4_PAGE_OFFSET relocations Sami Tolvanen
@ 2020-06-24 20:32 ` Sami Tolvanen
  2020-06-24 21:15 ` [PATCH 00/22] add support for Clang LTO Peter Zijlstra
                   ` (3 subsequent siblings)
  25 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 20:32 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86, Sami Tolvanen

Allow CONFIG_LTO_CLANG and CONFIG_THINLTO to be enabled.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/x86/Kconfig  | 2 ++
 arch/x86/Makefile | 5 +++++
 2 files changed, 7 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6a0cc524882d..df335b1f9c31 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -92,6 +92,8 @@ config X86
 	select ARCH_SUPPORTS_ACPI
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_NUMA_BALANCING	if X86_64
+	select ARCH_SUPPORTS_LTO_CLANG		if X86_64
+	select ARCH_SUPPORTS_THINLTO		if X86_64
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 00e378de8bc0..a1abc1e081ad 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -188,6 +188,11 @@ ifdef CONFIG_X86_64
 KBUILD_LDFLAGS += $(call ld-option, -z max-page-size=0x200000)
 endif
 
+ifdef CONFIG_LTO_CLANG
+KBUILD_LDFLAGS	+= -plugin-opt=-code-model=kernel \
+		   -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
+endif
+
 # Workaround for a gcc prelease that unfortunately was shipped in a suse release
 KBUILD_CFLAGS += -Wno-sign-compare
 #
-- 
2.27.0.212.ge8ba1cc988-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 02/22] kbuild: add support for Clang LTO
  2020-06-24 20:31 ` [PATCH 02/22] kbuild: add support for Clang LTO Sami Tolvanen
@ 2020-06-24 20:53   ` Nick Desaulniers
  2020-06-24 21:29     ` Sami Tolvanen
  2020-06-25  2:26   ` Nathan Chancellor
  1 sibling, 1 reply; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 20:53 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 1:32 PM Sami Tolvanen <samitolvanen@google.com> wrote:
>
> This change adds build system support for Clang's Link Time
> Optimization (LTO). With -flto, instead of ELF object files, Clang
> produces LLVM bitcode, which is compiled into native code at link
> time, allowing the final binary to be optimized globally. For more
> details, see:
>
>   https://llvm.org/docs/LinkTimeOptimization.html
>
> The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
> which defaults to LTO being disabled. To use LTO, the architecture
> must select ARCH_SUPPORTS_LTO_CLANG and support:
>
>   - compiling with Clang,
>   - compiling inline assembly with Clang's integrated assembler,
>   - and linking with LLD.
>
> While using full LTO results in the best runtime performance, the
> compilation is not scalable in time or memory. CONFIG_THINLTO
> enables ThinLTO, which allows parallel optimization and faster
> incremental builds. ThinLTO is used by default if the architecture
> also selects ARCH_SUPPORTS_THINLTO:
>
>   https://clang.llvm.org/docs/ThinLTO.html
>
> To enable LTO, LLVM tools must be used to handle bitcode files. The
> easiest way is to pass the LLVM=1 option to make:
>
>   $ make LLVM=1 defconfig
>   $ scripts/config -e LTO_CLANG
>   $ make LLVM=1
>
> Alternatively, at least the following LLVM tools must be used:
>
>   CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm
>
> To prepare for LTO support with other compilers, common parts are
> gated behind the CONFIG_LTO option, and LTO can be disabled for
> specific files by filtering out CC_FLAGS_LTO.
>
> Note that support for DYNAMIC_FTRACE and MODVERSIONS are added in
> follow-up patches.
>
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
> ---
>  Makefile                          | 16 ++++++++
>  arch/Kconfig                      | 66 +++++++++++++++++++++++++++++++
>  include/asm-generic/vmlinux.lds.h | 11 ++++--
>  scripts/Makefile.build            |  9 ++++-
>  scripts/Makefile.modfinal         |  9 ++++-
>  scripts/Makefile.modpost          | 24 ++++++++++-
>  scripts/link-vmlinux.sh           | 32 +++++++++++----
>  7 files changed, 151 insertions(+), 16 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index ac2c61c37a73..0c7fe6fb2143 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -886,6 +886,22 @@ KBUILD_CFLAGS      += $(CC_FLAGS_SCS)
>  export CC_FLAGS_SCS
>  endif
>
> +ifdef CONFIG_LTO_CLANG
> +ifdef CONFIG_THINLTO
> +CC_FLAGS_LTO_CLANG := -flto=thin $(call cc-option, -fsplit-lto-unit)

The kconfig change gates this on clang-11; do we still need the
cc-option check here, or can we hardcode the use of -fsplit-lto-unit?
Playing with the flag in godbolt, it looks like clang-8 had support
for this flag.

> +KBUILD_LDFLAGS += --thinlto-cache-dir=.thinlto-cache

It might be nice to have `make distclean` or even `make clean` scrub
the .thinlto-cache?  Also, I verified that the `.gitignore` rule for
`.*` properly ignores this dir.

> +else
> +CC_FLAGS_LTO_CLANG := -flto
> +endif
> +CC_FLAGS_LTO_CLANG += -fvisibility=default
> +endif
> +
> +ifdef CONFIG_LTO
> +CC_FLAGS_LTO   := $(CC_FLAGS_LTO_CLANG)
> +KBUILD_CFLAGS  += $(CC_FLAGS_LTO)
> +export CC_FLAGS_LTO
> +endif
> +
>  # arch Makefile may override CC so keep this after arch Makefile is included
>  NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
>
> diff --git a/arch/Kconfig b/arch/Kconfig
> index 8cc35dc556c7..e00b122293f8 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -552,6 +552,72 @@ config SHADOW_CALL_STACK
>           reading and writing arbitrary memory may be able to locate them
>           and hijack control flow by modifying the stacks.
>
> +config LTO
> +       bool
> +
> +config ARCH_SUPPORTS_LTO_CLANG
> +       bool
> +       help
> +         An architecture should select this option if it supports:
> +         - compiling with Clang,
> +         - compiling inline assembly with Clang's integrated assembler,
> +         - and linking with LLD.
> +
> +config ARCH_SUPPORTS_THINLTO
> +       bool
> +       help
> +         An architecture should select this option if it supports Clang's
> +         ThinLTO.
> +
> +config THINLTO
> +       bool "Clang ThinLTO"
> +       depends on LTO_CLANG && ARCH_SUPPORTS_THINLTO
> +       default y
> +       help
> +         This option enables Clang's ThinLTO, which allows for parallel
> +         optimization and faster incremental compiles. More information
> +         can be found from Clang's documentation:
> +
> +           https://clang.llvm.org/docs/ThinLTO.html
> +
> +choice
> +       prompt "Link Time Optimization (LTO)"
> +       default LTO_NONE
> +       help
> +         This option enables Link Time Optimization (LTO), which allows the
> +         compiler to optimize binaries globally.
> +
> +         If unsure, select LTO_NONE.
> +
> +config LTO_NONE
> +       bool "None"
> +
> +config LTO_CLANG
> +       bool "Clang's Link Time Optimization (EXPERIMENTAL)"
> +       depends on CC_IS_CLANG && CLANG_VERSION >= 110000 && LD_IS_LLD
> +       depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
> +       depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
> +       depends on ARCH_SUPPORTS_LTO_CLANG
> +       depends on !FTRACE_MCOUNT_RECORD
> +       depends on !KASAN
> +       depends on !MODVERSIONS
> +       select LTO
> +       help
> +          This option enables Clang's Link Time Optimization (LTO), which
> +          allows the compiler to optimize the kernel globally. If you enable
> +          this option, the compiler generates LLVM bitcode instead of ELF
> +          object files, and the actual compilation from bitcode happens at
> +          the LTO link step, which may take several minutes depending on the
> +          kernel configuration. More information can be found from LLVM's
> +          documentation:
> +
> +           https://llvm.org/docs/LinkTimeOptimization.html
> +
> +         To select this option, you also need to use LLVM tools to handle
> +         the bitcode by passing LLVM=1 to make.
> +
> +endchoice
> +
>  config HAVE_ARCH_WITHIN_STACK_FRAMES
>         bool
>         help
> diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
> index db600ef218d7..78079000c05a 100644
> --- a/include/asm-generic/vmlinux.lds.h
> +++ b/include/asm-generic/vmlinux.lds.h
> @@ -89,15 +89,18 @@
>   * .data. We don't want to pull in .data..other sections, which Linux
>   * has defined. Same for text and bss.
>   *
> + * With LTO_CLANG, the linker also splits sections by default, so we need
> + * these macros to combine the sections during the final link.
> + *
>   * RODATA_MAIN is not used because existing code already defines .rodata.x
>   * sections to be brought in with rodata.
>   */
> -#ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
> +#if defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || defined(CONFIG_LTO_CLANG)
>  #define TEXT_MAIN .text .text.[0-9a-zA-Z_]*
> -#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..LPBX*
> +#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..L* .data..compoundliteral*
>  #define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]*
> -#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]*
> -#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]*
> +#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]* .rodata..L*
> +#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]* .bss..compoundliteral*
>  #define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]*
>  #else
>  #define TEXT_MAIN .text
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index 2e8810b7e5ed..f307e708a1b7 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -108,7 +108,7 @@ endif
>  # ---------------------------------------------------------------------------
>
>  quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
> -      cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS), $(c_flags)) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
> +      cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS) $(CC_FLAGS_LTO), $(c_flags)) -fverbose-asm -S -o $@ $<
>
>  $(obj)/%.s: $(src)/%.c FORCE
>         $(call if_changed_dep,cc_s_c)
> @@ -424,8 +424,15 @@ $(obj)/lib.a: $(lib-y) FORCE
>  # Do not replace $(filter %.o,^) with $(real-prereqs). When a single object
>  # module is turned into a multi object module, $^ will contain header file
>  # dependencies recorded in the .*.cmd file.
> +ifdef CONFIG_LTO_CLANG
> +quiet_cmd_link_multi-m = AR [M]  $@
> +cmd_link_multi-m =                                             \
> +       rm -f $@;                                               \
> +       $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(filter %.o,$^)
> +else
>  quiet_cmd_link_multi-m = LD [M]  $@
>        cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^)
> +endif
>
>  $(multi-used-m): FORCE
>         $(call if_changed,link_multi-m)
> diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> index 411c1e600e7d..1005b147abd0 100644
> --- a/scripts/Makefile.modfinal
> +++ b/scripts/Makefile.modfinal
> @@ -6,6 +6,7 @@
>  PHONY := __modfinal
>  __modfinal:
>
> +include $(objtree)/include/config/auto.conf
>  include $(srctree)/scripts/Kbuild.include
>
>  # for c_flags
> @@ -29,6 +30,12 @@ quiet_cmd_cc_o_c = CC [M]  $@
>
>  ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
>
> +ifdef CONFIG_LTO_CLANG
> +# With CONFIG_LTO_CLANG, reuse the object file we compiled for modpost to
> +# avoid a second slow LTO link
> +prelink-ext := .lto
> +endif
> +
>  quiet_cmd_ld_ko_o = LD [M]  $@
>        cmd_ld_ko_o =                                                     \
>         $(LD) -r $(KBUILD_LDFLAGS)                                      \
> @@ -37,7 +44,7 @@ quiet_cmd_ld_ko_o = LD [M]  $@
>                 -o $@ $(filter %.o, $^);                                \
>         $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
>
> -$(modules): %.ko: %.o %.mod.o $(KBUILD_LDS_MODULE) FORCE
> +$(modules): %.ko: %$(prelink-ext).o %.mod.o $(KBUILD_LDS_MODULE) FORCE
>         +$(call if_changed,ld_ko_o)
>
>  targets += $(modules) $(modules:.ko=.mod.o)
> diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
> index 3651cbf6ad49..9ced8aecd579 100644
> --- a/scripts/Makefile.modpost
> +++ b/scripts/Makefile.modpost
> @@ -102,12 +102,32 @@ $(input-symdump):
>         @echo >&2 'WARNING: Symbol version dump "$@" is missing.'
>         @echo >&2 '         Modules may not have dependencies or modversions.'
>
> +ifdef CONFIG_LTO_CLANG
> +# With CONFIG_LTO_CLANG, .o files might be LLVM bitcode, so we need to run
> +# LTO to compile them into native code before running modpost
> +prelink-ext = .lto
> +
> +quiet_cmd_cc_lto_link_modules = LTO [M] $@
> +cmd_cc_lto_link_modules =                                              \
> +       $(LD) $(ld_flags) -r -o $@                                      \
> +               --whole-archive $(filter-out FORCE,$^)
> +
> +%.lto.o: %.o FORCE
> +       $(call if_changed,cc_lto_link_modules)
> +
> +PHONY += FORCE
> +FORCE:
> +
> +endif
> +
> +modules := $(sort $(shell cat $(MODORDER)))
> +
>  # Read out modules.order to pass in modpost.
>  # Otherwise, allmodconfig would fail with "Argument list too long".
>  quiet_cmd_modpost = MODPOST $@
> -      cmd_modpost = sed 's/ko$$/o/' $< | $(MODPOST) -T -
> +      cmd_modpost = sed 's/\.ko$$/$(prelink-ext)\.o/' $< | $(MODPOST) -T -
>
> -$(output-symdump): $(MODORDER) $(input-symdump) FORCE
> +$(output-symdump): $(MODORDER) $(input-symdump) $(modules:.ko=$(prelink-ext).o) FORCE
>         $(call if_changed,modpost)
>
>  targets += $(output-symdump)
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index 92dd745906f4..a681b3b6722e 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -52,6 +52,14 @@ modpost_link()
>                 ${KBUILD_VMLINUX_LIBS}                          \
>                 --end-group"
>
> +       if [ -n "${CONFIG_LTO_CLANG}" ]; then
> +               # This might take a while, so indicate that we're doing
> +               # an LTO link
> +               info LTO ${1}
> +       else
> +               info LD ${1}
> +       fi
> +
>         ${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${objects}
>  }
>
> @@ -99,13 +107,22 @@ vmlinux_link()
>         fi
>
>         if [ "${SRCARCH}" != "um" ]; then
> -               objects="--whole-archive                        \
> -                       ${KBUILD_VMLINUX_OBJS}                  \
> -                       --no-whole-archive                      \
> -                       --start-group                           \
> -                       ${KBUILD_VMLINUX_LIBS}                  \
> -                       --end-group                             \
> -                       ${@}"
> +               if [ -n "${CONFIG_LTO_CLANG}" ]; then
> +                       # Use vmlinux.o instead of performing the slow LTO
> +                       # link again.
> +                       objects="--whole-archive                \
> +                               vmlinux.o                       \
> +                               --no-whole-archive              \
> +                               ${@}"
> +               else
> +                       objects="--whole-archive                \
> +                               ${KBUILD_VMLINUX_OBJS}          \
> +                               --no-whole-archive              \
> +                               --start-group                   \
> +                               ${KBUILD_VMLINUX_LIBS}          \
> +                               --end-group                     \
> +                               ${@}"
> +               fi
>
>                 ${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux}      \
>                         ${strip_debug#-Wl,}                     \
> @@ -270,7 +287,6 @@ fi;
>  ${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1
>
>  #link vmlinux.o
> -info LD vmlinux.o
>  modpost_link vmlinux.o
>  objtool_link vmlinux.o
>
> --
> 2.27.0.212.ge8ba1cc988-goog
>


-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 13/22] scripts/mod: disable LTO for empty.c
  2020-06-24 20:31 ` [PATCH 13/22] scripts/mod: disable LTO for empty.c Sami Tolvanen
@ 2020-06-24 20:57   ` Nick Desaulniers
  0 siblings, 0 replies; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 20:57 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
>
> With CONFIG_LTO_CLANG, clang generates LLVM IR instead of ELF object
> files. As empty.o is used for probing target properties, disable LTO
> for it to produce an object file instead.
>
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

> ---
>  scripts/mod/Makefile | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/scripts/mod/Makefile b/scripts/mod/Makefile
> index 296b6a3878b2..b6e3b40c6eeb 100644
> --- a/scripts/mod/Makefile
> +++ b/scripts/mod/Makefile
> @@ -1,5 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0
>  OBJECT_FILES_NON_STANDARD := y
> +CFLAGS_REMOVE_empty.o += $(CC_FLAGS_LTO)
>
>  hostprogs      := modpost mk_elfconfig
>  always-y       := $(hostprogs) empty.o
> --
> 2.27.0.212.ge8ba1cc988-goog
>


-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 17/22] arm64: vdso: disable LTO
  2020-06-24 20:31 ` [PATCH 17/22] arm64: vdso: disable LTO Sami Tolvanen
@ 2020-06-24 20:58   ` Nick Desaulniers
  2020-06-24 21:09     ` Nick Desaulniers
  2020-06-24 21:52     ` Sami Tolvanen
  0 siblings, 2 replies; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 20:58 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
>
> Filter out CC_FLAGS_LTO for the vDSO.

Just curious about this patch (and the following one for x86's vdso),
do you happen to recall specifically what the issues with the vdso's
are?

>
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
> ---
>  arch/arm64/kernel/vdso/Makefile | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
> index 556d424c6f52..cfad4c296ca1 100644
> --- a/arch/arm64/kernel/vdso/Makefile
> +++ b/arch/arm64/kernel/vdso/Makefile
> @@ -29,8 +29,8 @@ ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \
>  ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18
>  ccflags-y += -DDISABLE_BRANCH_PROFILING
>
> -CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS)
> -KBUILD_CFLAGS                  += $(DISABLE_LTO)
> +CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) \
> +                               $(CC_FLAGS_LTO)
>  KASAN_SANITIZE                 := n
>  UBSAN_SANITIZE                 := n
>  OBJECT_FILES_NON_STANDARD      := y
> --
> 2.27.0.212.ge8ba1cc988-goog
>


-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 07/22] kbuild: lto: merge module sections
  2020-06-24 20:31 ` [PATCH 07/22] kbuild: lto: merge module sections Sami Tolvanen
@ 2020-06-24 21:01   ` Nick Desaulniers
  2020-06-24 21:31     ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 21:01 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
>
> LLD always splits sections with LTO, which increases module sizes. This
> change adds a linker script that merges the split sections in the final
> module and discards the .eh_frame section that LLD may generate.

For discarding .eh_frame, Kees is currently fighting with a series
that I would really like to see land that enables warnings on orphan
section placement.  I don't see any new flags to inhibit .eh_frame
generation, or discard it in the linker script, so I'd expect it to be
treated as an orphan section and kept.  Was that missed, or should
that be removed from the commit message?

>
> Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
> ---
>  Makefile               |  2 ++
>  scripts/module-lto.lds | 26 ++++++++++++++++++++++++++
>  2 files changed, 28 insertions(+)
>  create mode 100644 scripts/module-lto.lds
>
> diff --git a/Makefile b/Makefile
> index ee66513a5b66..9ffec5fe1737 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -898,6 +898,8 @@ CC_FLAGS_LTO_CLANG += -fvisibility=default
>  # Limit inlining across translation units to reduce binary size
>  LD_FLAGS_LTO_CLANG := -mllvm -import-instr-limit=5
>  KBUILD_LDFLAGS += $(LD_FLAGS_LTO_CLANG)
> +
> +KBUILD_LDS_MODULE += $(srctree)/scripts/module-lto.lds
>  endif
>
>  ifdef CONFIG_LTO
> diff --git a/scripts/module-lto.lds b/scripts/module-lto.lds
> new file mode 100644
> index 000000000000..65884c652bf2
> --- /dev/null
> +++ b/scripts/module-lto.lds
> @@ -0,0 +1,26 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * With CONFIG_LTO_CLANG, LLD always enables -fdata-sections and
> + * -ffunction-sections, which increases the size of the final module.
> + * Merge the split sections in the final binary.
> + */
> +SECTIONS {
> +       __patchable_function_entries : { *(__patchable_function_entries) }
> +
> +       .bss : {
> +               *(.bss .bss.[0-9a-zA-Z_]*)
> +               *(.bss..L* .bss..compoundliteral*)
> +       }
> +
> +       .data : {
> +               *(.data .data.[0-9a-zA-Z_]*)
> +               *(.data..L* .data..compoundliteral*)
> +       }
> +
> +       .rodata : {
> +               *(.rodata .rodata.[0-9a-zA-Z_]*)
> +               *(.rodata..L* .rodata..compoundliteral*)
> +       }
> +
> +       .text : { *(.text .text.[0-9a-zA-Z_]*) }
> +}
> --
> 2.27.0.212.ge8ba1cc988-goog
>


-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 17/22] arm64: vdso: disable LTO
  2020-06-24 20:58   ` Nick Desaulniers
@ 2020-06-24 21:09     ` Nick Desaulniers
  2020-06-24 23:51       ` Andi Kleen
  2020-06-24 21:52     ` Sami Tolvanen
  1 sibling, 1 reply; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 21:09 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT),
	Andi Kleen

On Wed, Jun 24, 2020 at 1:58 PM Nick Desaulniers
<ndesaulniers@google.com> wrote:
>
> On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
> >
> > Filter out CC_FLAGS_LTO for the vDSO.
>
> Just curious about this patch (and the following one for x86's vdso),
> do you happen to recall specifically what the issues with the vdso's
> are?

+ Andi (tangential, I actually have a bunch of tabs open with slides
from http://halobates.de/ right now)
58edae3aac9f2
67424d5a22124
$ git log -S DISABLE_LTO

>
> >
> > Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
> > ---
> >  arch/arm64/kernel/vdso/Makefile | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
> > index 556d424c6f52..cfad4c296ca1 100644
> > --- a/arch/arm64/kernel/vdso/Makefile
> > +++ b/arch/arm64/kernel/vdso/Makefile
> > @@ -29,8 +29,8 @@ ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \
> >  ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18
> >  ccflags-y += -DDISABLE_BRANCH_PROFILING
> >
> > -CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS)
> > -KBUILD_CFLAGS                  += $(DISABLE_LTO)
> > +CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) \
> > +                               $(CC_FLAGS_LTO)
> >  KASAN_SANITIZE                 := n
> >  UBSAN_SANITIZE                 := n
> >  OBJECT_FILES_NON_STANDARD      := y
> > --

-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 08/22] kbuild: lto: remove duplicate dependencies from .mod files
  2020-06-24 20:31 ` [PATCH 08/22] kbuild: lto: remove duplicate dependencies from .mod files Sami Tolvanen
@ 2020-06-24 21:13   ` Nick Desaulniers
  0 siblings, 0 replies; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 21:13 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
>
> With LTO, llvm-nm prints out symbols for each archive member
> separately, which results in a lot of duplicate dependencies in the
> .mod file when CONFIG_TRIM_UNUSED_SYMS is enabled. When a module
> consists of several compilation units, the output can exceed the
> default xargs command size limit and split the dependency list to
> multiple lines, which results in used symbols getting trimmed.
>
> This change removes duplicate dependencies, which will reduce the
> probability of this happening and makes .mod files smaller and
> easier to read.
>
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

> ---
>  scripts/Makefile.build | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index 82977350f5a6..82b465ce3ca0 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -291,7 +291,7 @@ endef
>
>  # List module undefined symbols (or empty line if not enabled)
>  ifdef CONFIG_TRIM_UNUSED_KSYMS
> -cmd_undef_syms = $(NM) $< | sed -n 's/^  *U //p' | xargs echo
> +cmd_undef_syms = $(NM) $< | sed -n 's/^  *U //p' | sort -u | xargs echo
>  else
>  cmd_undef_syms = echo
>  endif
> --
> 2.27.0.212.ge8ba1cc988-goog
>


-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (21 preceding siblings ...)
  2020-06-24 20:32 ` [PATCH 22/22] x86, build: allow LTO_CLANG and THINLTO to be selected Sami Tolvanen
@ 2020-06-24 21:15 ` Peter Zijlstra
  2020-06-24 21:30   ` Sami Tolvanen
  2020-06-24 21:31   ` Nick Desaulniers
  2020-06-28 16:56 ` Masahiro Yamada
                   ` (2 subsequent siblings)
  25 siblings, 2 replies; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-24 21:15 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 01:31:38PM -0700, Sami Tolvanen wrote:
> This patch series adds support for building x86_64 and arm64 kernels
> with Clang's Link Time Optimization (LTO).
> 
> In addition to performance, the primary motivation for LTO is to allow
> Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> Pixel devices have shipped with LTO+CFI kernels since 2018.
> 
> Most of the patches are build system changes for handling LLVM bitcode,
> which Clang produces with LTO instead of ELF object files, postponing
> ELF processing until a later stage, and ensuring initcall ordering.
> 
> Note that first objtool patch in the series is already in linux-next,
> but as it's needed with LTO, I'm including it also here to make testing
> easier.

I'm very sad that yet again, memory ordering isn't addressed. LTO vastly
increases the range of the optimizer to wreck things.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 05/22] kbuild: lto: postpone objtool
  2020-06-24 20:31 ` [PATCH 05/22] kbuild: lto: postpone objtool Sami Tolvanen
@ 2020-06-24 21:19   ` Peter Zijlstra
  2020-06-24 21:49     ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-24 21:19 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 01:31:43PM -0700, Sami Tolvanen wrote:
> diff --git a/include/linux/compiler.h b/include/linux/compiler.h
> index 30827f82ad62..12b115152532 100644
> --- a/include/linux/compiler.h
> +++ b/include/linux/compiler.h
> @@ -120,7 +120,7 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
>  /* Annotate a C jump table to allow objtool to follow the code flow */
>  #define __annotate_jump_table __section(.rodata..c_jump_table)
>  
> -#ifdef CONFIG_DEBUG_ENTRY
> +#if defined(CONFIG_DEBUG_ENTRY) || defined(CONFIG_LTO_CLANG)
>  /* Begin/end of an instrumentation safe region */
>  #define instrumentation_begin() ({					\
>  	asm volatile("%c0:\n\t"						\

Why would you be doing noinstr validation for lto builds? That doesn't
make sense.

> diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> index 9ad9210d70a1..9fdba71c135a 100644
> --- a/lib/Kconfig.debug
> +++ b/lib/Kconfig.debug
> @@ -399,7 +399,7 @@ config STACK_VALIDATION
>  
>  config VMLINUX_VALIDATION
>  	bool
> -	depends on STACK_VALIDATION && DEBUG_ENTRY && !PARAVIRT
> +	depends on STACK_VALIDATION && (DEBUG_ENTRY || LTO_CLANG) && !PARAVIRT
>  	default y
>  

For that very same reason you shouldn't be excluding paravirt either.

> diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> index d168f0cfe67c..9f1df2f1fab5 100644
> --- a/scripts/Makefile.modfinal
> +++ b/scripts/Makefile.modfinal
> @@ -48,6 +48,21 @@ endif # CC_USING_PATCHABLE_FUNCTION_ENTRY
>  endif # CC_USING_RECORD_MCOUNT
>  endif # CONFIG_FTRACE_MCOUNT_RECORD
>  
> +ifdef CONFIG_STACK_VALIDATION
> +ifneq ($(SKIP_STACK_VALIDATION),1)
> +cmd_ld_ko_o +=								\
> +	$(objtree)/tools/objtool/objtool				\
> +		$(if $(CONFIG_UNWINDER_ORC),orc generate,check)		\
> +		--module						\
> +		$(if $(CONFIG_FRAME_POINTER),,--no-fp)			\
> +		$(if $(CONFIG_GCOV_KERNEL),--no-unreachable,)		\
> +		$(if $(CONFIG_RETPOLINE),--retpoline,)			\
> +		$(if $(CONFIG_X86_SMAP),--uaccess,)			\
> +		$(@:.ko=$(prelink-ext).o);
> +
> +endif # SKIP_STACK_VALIDATION
> +endif # CONFIG_STACK_VALIDATION

What about the objtool invocation from link-vmlinux.sh ?

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 06/22] kbuild: lto: limit inlining
  2020-06-24 20:31 ` [PATCH 06/22] kbuild: lto: limit inlining Sami Tolvanen
@ 2020-06-24 21:20   ` Peter Zijlstra
  2020-06-24 23:37     ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-24 21:20 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, George Burgess IV

On Wed, Jun 24, 2020 at 01:31:44PM -0700, Sami Tolvanen wrote:
> This change limits function inlining across translation unit
> boundaries in order to reduce the binary size with LTO.
> 
> The -import-instr-limit flag defines a size limit, as the number
> of LLVM IR instructions, for importing functions from other TUs.
> The default value is 100, and decreasing it to 5 reduces the size
> of a stripped arm64 defconfig vmlinux by 11%.

Is that also the right number for x86? What about the effect on
performance? What did 6 do? or 4?

> Suggested-by: George Burgess IV <gbiv@google.com>
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
> ---
>  Makefile | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Makefile b/Makefile
> index 3a7e5e5c17b9..ee66513a5b66 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -894,6 +894,10 @@ else
>  CC_FLAGS_LTO_CLANG := -flto
>  endif
>  CC_FLAGS_LTO_CLANG += -fvisibility=default
> +
> +# Limit inlining across translation units to reduce binary size
> +LD_FLAGS_LTO_CLANG := -mllvm -import-instr-limit=5
> +KBUILD_LDFLAGS += $(LD_FLAGS_LTO_CLANG)
>  endif
>  
>  ifdef CONFIG_LTO
> -- 
> 2.27.0.212.ge8ba1cc988-goog
> 

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 04/22] kbuild: lto: fix recordmcount
  2020-06-24 20:31 ` [PATCH 04/22] kbuild: lto: fix recordmcount Sami Tolvanen
@ 2020-06-24 21:27   ` Peter Zijlstra
  2020-06-24 21:45     ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-24 21:27 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 01:31:42PM -0700, Sami Tolvanen wrote:
> With LTO, LLVM bitcode won't be compiled into native code until
> modpost_link. This change postpones calls to recordmcount until after
> this step.
> 
> In order to exclude specific functions from inspection, we add a new
> code section .text..nomcount, which we tell recordmcount to ignore, and
> a __nomcount attribute for moving functions to this section.

I'm confused, you only add this to functions in ftrace itself, which is
compiled with:

 KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))

and so should not have mcount/fentry sites anyway. So what's the point
of ignoring them further?

This Changelog does not explain.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 02/22] kbuild: add support for Clang LTO
  2020-06-24 20:53   ` Nick Desaulniers
@ 2020-06-24 21:29     ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 21:29 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 01:53:52PM -0700, Nick Desaulniers wrote:
> On Wed, Jun 24, 2020 at 1:32 PM Sami Tolvanen <samitolvanen@google.com> wrote:
> >
> > diff --git a/Makefile b/Makefile
> > index ac2c61c37a73..0c7fe6fb2143 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -886,6 +886,22 @@ KBUILD_CFLAGS      += $(CC_FLAGS_SCS)
> >  export CC_FLAGS_SCS
> >  endif
> >
> > +ifdef CONFIG_LTO_CLANG
> > +ifdef CONFIG_THINLTO
> > +CC_FLAGS_LTO_CLANG := -flto=thin $(call cc-option, -fsplit-lto-unit)
> 
> The kconfig change gates this on clang-11; do we still need the
> cc-option check here, or can we hardcode the use of -fsplit-lto-unit?
> Playing with the flag in godbolt, it looks like clang-8 had support
> for this flag.

True, we don't need cc-option here anymore. I'll remove it, thanks.

> > +KBUILD_LDFLAGS += --thinlto-cache-dir=.thinlto-cache
> 
> It might be nice to have `make distclean` or even `make clean` scrub
> the .thinlto-cache?  Also, I verified that the `.gitignore` rule for
> `.*` properly ignores this dir.

Sure, distclean sounds appropriate to me.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-24 21:15 ` [PATCH 00/22] add support for Clang LTO Peter Zijlstra
@ 2020-06-24 21:30   ` Sami Tolvanen
  2020-06-25  8:27     ` Will Deacon
  2020-06-24 21:31   ` Nick Desaulniers
  1 sibling, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 21:30 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 11:15:40PM +0200, Peter Zijlstra wrote:
> On Wed, Jun 24, 2020 at 01:31:38PM -0700, Sami Tolvanen wrote:
> > This patch series adds support for building x86_64 and arm64 kernels
> > with Clang's Link Time Optimization (LTO).
> > 
> > In addition to performance, the primary motivation for LTO is to allow
> > Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> > Pixel devices have shipped with LTO+CFI kernels since 2018.
> > 
> > Most of the patches are build system changes for handling LLVM bitcode,
> > which Clang produces with LTO instead of ELF object files, postponing
> > ELF processing until a later stage, and ensuring initcall ordering.
> > 
> > Note that first objtool patch in the series is already in linux-next,
> > but as it's needed with LTO, I'm including it also here to make testing
> > easier.
> 
> I'm very sad that yet again, memory ordering isn't addressed. LTO vastly
> increases the range of the optimizer to wreck things.

I believe Will has some thoughts about this, and patches, but I'll let
him talk about it.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 07/22] kbuild: lto: merge module sections
  2020-06-24 21:01   ` Nick Desaulniers
@ 2020-06-24 21:31     ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 21:31 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 02:01:59PM -0700, 'Nick Desaulniers' via Clang Built Linux wrote:
> On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
> >
> > LLD always splits sections with LTO, which increases module sizes. This
> > change adds a linker script that merges the split sections in the final
> > module and discards the .eh_frame section that LLD may generate.
> 
> For discarding .eh_frame, Kees is currently fighting with a series
> that I would really like to see land that enables warnings on orphan
> section placement.  I don't see any new flags to inhibit .eh_frame
> generation, or discard it in the linker script, so I'd expect it to be
> treated as an orphan section and kept.  Was that missed, or should
> that be removed from the commit message?

It should be removed from the commit message, thanks for pointing it
out.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-24 21:15 ` [PATCH 00/22] add support for Clang LTO Peter Zijlstra
  2020-06-24 21:30   ` Sami Tolvanen
@ 2020-06-24 21:31   ` Nick Desaulniers
  2020-06-25  8:03     ` Peter Zijlstra
  1 sibling, 1 reply; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 21:31 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 2:15 PM Peter Zijlstra <peterz@infradead.org> wrote:
>
> On Wed, Jun 24, 2020 at 01:31:38PM -0700, Sami Tolvanen wrote:
> > This patch series adds support for building x86_64 and arm64 kernels
> > with Clang's Link Time Optimization (LTO).
> >
> > In addition to performance, the primary motivation for LTO is to allow
> > Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> > Pixel devices have shipped with LTO+CFI kernels since 2018.
> >
> > Most of the patches are build system changes for handling LLVM bitcode,
> > which Clang produces with LTO instead of ELF object files, postponing
> > ELF processing until a later stage, and ensuring initcall ordering.
> >
> > Note that first objtool patch in the series is already in linux-next,
> > but as it's needed with LTO, I'm including it also here to make testing
> > easier.
>
> I'm very sad that yet again, memory ordering isn't addressed. LTO vastly
> increases the range of the optimizer to wreck things.

Hi Peter, could you expand on the issue for the folks on the thread?
I'm happy to try to hack something up in LLVM if we check that X does
or does not happen; maybe we can even come up with some concrete test
cases that can be added to LLVM's codebase?

-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 04/22] kbuild: lto: fix recordmcount
  2020-06-24 21:27   ` Peter Zijlstra
@ 2020-06-24 21:45     ` Sami Tolvanen
  2020-06-25  7:45       ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 21:45 UTC (permalink / raw)
  To: Peter Zijlstra, Steven Rostedt
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 11:27:37PM +0200, Peter Zijlstra wrote:
> On Wed, Jun 24, 2020 at 01:31:42PM -0700, Sami Tolvanen wrote:
> > With LTO, LLVM bitcode won't be compiled into native code until
> > modpost_link. This change postpones calls to recordmcount until after
> > this step.
> > 
> > In order to exclude specific functions from inspection, we add a new
> > code section .text..nomcount, which we tell recordmcount to ignore, and
> > a __nomcount attribute for moving functions to this section.
> 
> I'm confused, you only add this to functions in ftrace itself, which is
> compiled with:
> 
>  KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
> 
> and so should not have mcount/fentry sites anyway. So what's the point
> of ignoring them further?
> 
> This Changelog does not explain.

Normally, recordmcount ignores each ftrace.o file, but since we are
running it on vmlinux.o, we need another way to stop it from looking
at references to mcount/fentry that are not calls. Here's a comment
from recordmcount.c:

  /*
   * The file kernel/trace/ftrace.o references the mcount
   * function but does not call it. Since ftrace.o should
   * not be traced anyway, we just skip it.
   */

But I agree, the commit message could use more defails. Also +Steven
for thoughts about this approach.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 05/22] kbuild: lto: postpone objtool
  2020-06-24 21:19   ` Peter Zijlstra
@ 2020-06-24 21:49     ` Sami Tolvanen
  2020-06-25  7:47       ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 21:49 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 11:19:08PM +0200, Peter Zijlstra wrote:
> On Wed, Jun 24, 2020 at 01:31:43PM -0700, Sami Tolvanen wrote:
> > diff --git a/include/linux/compiler.h b/include/linux/compiler.h
> > index 30827f82ad62..12b115152532 100644
> > --- a/include/linux/compiler.h
> > +++ b/include/linux/compiler.h
> > @@ -120,7 +120,7 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
> >  /* Annotate a C jump table to allow objtool to follow the code flow */
> >  #define __annotate_jump_table __section(.rodata..c_jump_table)
> >  
> > -#ifdef CONFIG_DEBUG_ENTRY
> > +#if defined(CONFIG_DEBUG_ENTRY) || defined(CONFIG_LTO_CLANG)
> >  /* Begin/end of an instrumentation safe region */
> >  #define instrumentation_begin() ({					\
> >  	asm volatile("%c0:\n\t"						\
> 
> Why would you be doing noinstr validation for lto builds? That doesn't
> make sense.

This is just to avoid a ton of noinstr warnings when we run objtool on
vmlinux.o, but I'm also fine with skipping noinstr validation with LTO.

> > +ifdef CONFIG_STACK_VALIDATION
> > +ifneq ($(SKIP_STACK_VALIDATION),1)
> > +cmd_ld_ko_o +=								\
> > +	$(objtree)/tools/objtool/objtool				\
> > +		$(if $(CONFIG_UNWINDER_ORC),orc generate,check)		\
> > +		--module						\
> > +		$(if $(CONFIG_FRAME_POINTER),,--no-fp)			\
> > +		$(if $(CONFIG_GCOV_KERNEL),--no-unreachable,)		\
> > +		$(if $(CONFIG_RETPOLINE),--retpoline,)			\
> > +		$(if $(CONFIG_X86_SMAP),--uaccess,)			\
> > +		$(@:.ko=$(prelink-ext).o);
> > +
> > +endif # SKIP_STACK_VALIDATION
> > +endif # CONFIG_STACK_VALIDATION
> 
> What about the objtool invocation from link-vmlinux.sh ?

What about it? The existing objtool_link invocation in link-vmlinux.sh
works fine for our purposes as well.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 17/22] arm64: vdso: disable LTO
  2020-06-24 20:58   ` Nick Desaulniers
  2020-06-24 21:09     ` Nick Desaulniers
@ 2020-06-24 21:52     ` Sami Tolvanen
  2020-06-24 23:05       ` Nick Desaulniers
  1 sibling, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 21:52 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 01:58:57PM -0700, 'Nick Desaulniers' via Clang Built Linux wrote:
> On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
> >
> > Filter out CC_FLAGS_LTO for the vDSO.
> 
> Just curious about this patch (and the following one for x86's vdso),
> do you happen to recall specifically what the issues with the vdso's
> are?

I recall the compiler optimizing away functions at some point, but as
LTO is not really needed in the vDSO, it's just easiest to disable it
there.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 12/22] modpost: lto: strip .lto from module names
  2020-06-24 20:31 ` [PATCH 12/22] modpost: lto: strip .lto from module names Sami Tolvanen
@ 2020-06-24 22:05   ` Nick Desaulniers
  0 siblings, 0 replies; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 22:05 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT),
	Bill Wendling

On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
>
> With LTO, everything is compiled into LLVM bitcode, so we have to link
> each module into native code before modpost. Kbuild uses the .lto.o
> suffix for these files, which also ends up in module information. This
> change strips the unnecessary .lto suffix from the module name.
>
> Suggested-by: Bill Wendling <morbo@google.com>
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
> ---
>  scripts/mod/modpost.c    | 16 +++++++---------
>  scripts/mod/modpost.h    |  9 +++++++++
>  scripts/mod/sumversion.c |  6 +++++-
>  3 files changed, 21 insertions(+), 10 deletions(-)
>
> diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
> index 6aea65c65745..8352f8a1a138 100644
> --- a/scripts/mod/modpost.c
> +++ b/scripts/mod/modpost.c
> @@ -17,7 +17,6 @@
>  #include <ctype.h>
>  #include <string.h>
>  #include <limits.h>
> -#include <stdbool.h>

It looks like `bool` is used in the function signatures of other
functions in this TU, I'm not the biggest fan of hoisting the includes
out of the .c source into the header (I'd keep it in both), but I
don't feel strongly enough to NACK.

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

>  #include <errno.h>
>  #include "modpost.h"
>  #include "../../include/linux/license.h"
> @@ -80,14 +79,6 @@ modpost_log(enum loglevel loglevel, const char *fmt, ...)
>                 exit(1);
>  }
>
> -static inline bool strends(const char *str, const char *postfix)
> -{
> -       if (strlen(str) < strlen(postfix))
> -               return false;
> -
> -       return strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
> -}
> -
>  void *do_nofail(void *ptr, const char *expr)
>  {
>         if (!ptr)
> @@ -1975,6 +1966,10 @@ static char *remove_dot(char *s)
>                 size_t m = strspn(s + n + 1, "0123456789");
>                 if (m && (s[n + m] == '.' || s[n + m] == 0))
>                         s[n] = 0;
> +
> +               /* strip trailing .lto */
> +               if (strends(s, ".lto"))
> +                       s[strlen(s) - 4] = '\0';
>         }
>         return s;
>  }
> @@ -1998,6 +1993,9 @@ static void read_symbols(const char *modname)
>                 /* strip trailing .o */
>                 tmp = NOFAIL(strdup(modname));
>                 tmp[strlen(tmp) - 2] = '\0';
> +               /* strip trailing .lto */
> +               if (strends(tmp, ".lto"))
> +                       tmp[strlen(tmp) - 4] = '\0';
>                 mod = new_module(tmp);
>                 free(tmp);
>         }
> diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
> index 3aa052722233..fab30d201f9e 100644
> --- a/scripts/mod/modpost.h
> +++ b/scripts/mod/modpost.h
> @@ -2,6 +2,7 @@
>  #include <stdio.h>
>  #include <stdlib.h>
>  #include <stdarg.h>
> +#include <stdbool.h>
>  #include <string.h>
>  #include <sys/types.h>
>  #include <sys/stat.h>
> @@ -180,6 +181,14 @@ static inline unsigned int get_secindex(const struct elf_info *info,
>         return info->symtab_shndx_start[sym - info->symtab_start];
>  }
>
> +static inline bool strends(const char *str, const char *postfix)
> +{
> +       if (strlen(str) < strlen(postfix))
> +               return false;
> +
> +       return strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
> +}
> +
>  /* file2alias.c */
>  extern unsigned int cross_build;
>  void handle_moddevtable(struct module *mod, struct elf_info *info,
> diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c
> index d587f40f1117..760e6baa7eda 100644
> --- a/scripts/mod/sumversion.c
> +++ b/scripts/mod/sumversion.c
> @@ -391,10 +391,14 @@ void get_src_version(const char *modname, char sum[], unsigned sumlen)
>         struct md4_ctx md;
>         char *fname;
>         char filelist[PATH_MAX + 1];
> +       int postfix_len = 1;
> +
> +       if (strends(modname, ".lto.o"))
> +               postfix_len = 5;
>
>         /* objects for a module are listed in the first line of *.mod file. */
>         snprintf(filelist, sizeof(filelist), "%.*smod",
> -                (int)strlen(modname) - 1, modname);
> +                (int)strlen(modname) - postfix_len, modname);
>
>         buf = read_text_file(filelist);
>
> --
> 2.27.0.212.ge8ba1cc988-goog
>


-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 11/22] pci: lto: fix PREL32 relocations
  2020-06-24 20:31 ` [PATCH 11/22] pci: " Sami Tolvanen
@ 2020-06-24 22:49   ` kernel test robot
  2020-06-24 23:03     ` Nick Desaulniers
  2020-07-17 20:26   ` Bjorn Helgaas
  1 sibling, 1 reply; 213+ messages in thread
From: kernel test robot @ 2020-06-24 22:49 UTC (permalink / raw)
  To: Sami Tolvanen, Masahiro Yamada, Will Deacon
  Cc: kbuild-all, Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel


[-- Attachment #1: Type: text/plain, Size: 34069 bytes --]

Hi Sami,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on 26e122e97a3d0390ebec389347f64f3730fdf48f]

url:    https://github.com/0day-ci/linux/commits/Sami-Tolvanen/add-support-for-Clang-LTO/20200625-043816
base:    26e122e97a3d0390ebec389347f64f3730fdf48f
config: i386-alldefconfig (attached as .config)
compiler: gcc-9 (Debian 9.3.0-13) 9.3.0
reproduce (this is a W=1 build):
        # save the attached .config to linux build tree
        make W=1 ARCH=i386 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   In file included from arch/x86/kernel/pci-dma.c:9:
>> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_via_no_dac190' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
>> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
>> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
>> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
>> include/linux/pci.h:1949:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1949 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>> arch/x86/kernel/pci-dma.c:154:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_CLASS_FINAL'
     154 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--
   In file included from arch/x86/kernel/quirks.c:6:
>> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet180' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
>> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
>> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
>> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>> arch/x86/kernel/quirks.c:156:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
     156 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
         | ^~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet181' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
>> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
>> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
>> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
   arch/x86/kernel/quirks.c:158:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
     158 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
         | ^~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet182' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
>> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
>> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
>> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
   arch/x86/kernel/quirks.c:160:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
     160 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
         | ^~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet183' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
   include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
   include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
   arch/x86/kernel/quirks.c:162:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
     162 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
         | ^~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet184' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
   include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
   include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
   arch/x86/kernel/quirks.c:164:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
     164 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
         | ^~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet185' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
   include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
   include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
   arch/x86/kernel/quirks.c:166:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
     166 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
         | ^~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet186' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
   include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
--
   In file included from drivers/pci/vpd.c:8:
>> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_f0_vpd_link180' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
>> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
>> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
>> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1941:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1941 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/pci/vpd.c:543:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_CLASS_EARLY'
     543 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd181' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
>> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
>> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
>> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/pci/vpd.c:560:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
     560 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd);
         | ^~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd182' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
>> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
>> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
>> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
>> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pci/vpd.c:561:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
     561 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd);
         | ^~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd183' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
   include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
   include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pci/vpd.c:562:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
     562 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd);
         | ^~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd184' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
   include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
   include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pci/vpd.c:563:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
     563 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd);
         | ^~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd185' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                             ^~~~~~~~~~~~
   include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
    1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
         |       ^~~~
   include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
    1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                             ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
         |                                     ^~~~~~~
   include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
    1929 |       class_shift, hook, __UNIQUE_ID(hook))
         |                          ^~~~~~~~~~~
   include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
    1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pci/vpd.c:564:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
     564 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd);
         | ^~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd186' [-Wmissing-prototypes]
      72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
..

vim +/__DECLARE_PCI_FIXUP_SECTION +1928 include/linux/pci.h

^1da177e4c3f415 Linus Torvalds 2005-04-16  1910  
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1911  #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
b1b820bb0420d08 Sami Tolvanen  2020-06-24  1912  #define ___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
b1b820bb0420d08 Sami Tolvanen  2020-06-24  1913  				    class_shift, hook, stub)		\
b1b820bb0420d08 Sami Tolvanen  2020-06-24 @1914  	void stub(struct pci_dev *dev) { hook(dev); }			\
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1915  	asm(".section "	#sec ", \"a\"				\n"	\
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1916  	    ".balign	16					\n"	\
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1917  	    ".short "	#vendor ", " #device "			\n"	\
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1918  	    ".long "	#class ", " #class_shift "		\n"	\
b1b820bb0420d08 Sami Tolvanen  2020-06-24  1919  	    ".long "	#stub " - .				\n"	\
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1920  	    ".previous						\n");
b1b820bb0420d08 Sami Tolvanen  2020-06-24  1921  
b1b820bb0420d08 Sami Tolvanen  2020-06-24  1922  #define __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
b1b820bb0420d08 Sami Tolvanen  2020-06-24  1923  				  class_shift, hook, stub)		\
b1b820bb0420d08 Sami Tolvanen  2020-06-24  1924  	___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
b1b820bb0420d08 Sami Tolvanen  2020-06-24  1925  				  class_shift, hook, stub)
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1926  #define DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1927  				  class_shift, hook)			\
c9d8b55fa019162 Ard Biesheuvel 2018-08-21 @1928  	__DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
b1b820bb0420d08 Sami Tolvanen  2020-06-24 @1929  				  class_shift, hook, __UNIQUE_ID(hook))
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1930  #else
^1da177e4c3f415 Linus Torvalds 2005-04-16  1931  /* Anonymous variables would be nice... */
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1932  #define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class,	\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1933  				  class_shift, hook)			\
ecf61c78bd787b9 Michal Marek   2013-11-11  1934  	static const struct pci_fixup __PASTE(__pci_fixup_##name,__LINE__) __used	\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1935  	__attribute__((__section__(#section), aligned((sizeof(void *)))))    \
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1936  		= { vendor, device, class, class_shift, hook };
c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1937  #endif
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1938  
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1939  #define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class,		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1940  					 class_shift, hook)		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1941  	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,			\
ecf61c78bd787b9 Michal Marek   2013-11-11  1942  		hook, vendor, device, class, class_shift, hook)
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1943  #define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class,		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1944  					 class_shift, hook)		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1945  	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,			\
ecf61c78bd787b9 Michal Marek   2013-11-11  1946  		hook, vendor, device, class, class_shift, hook)
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1947  #define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class,		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1948  					 class_shift, hook)		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23 @1949  	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,			\
ecf61c78bd787b9 Michal Marek   2013-11-11  1950  		hook, vendor, device, class, class_shift, hook)
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1951  #define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class,		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1952  					 class_shift, hook)		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1953  	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable,			\
ecf61c78bd787b9 Michal Marek   2013-11-11  1954  		hook, vendor, device, class, class_shift, hook)
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1955  #define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class,		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1956  					 class_shift, hook)		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1957  	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume,			\
0aa0f5d1084ca1c Bjorn Helgaas  2017-12-02  1958  		resume##hook, vendor, device, class, class_shift, hook)
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1959  #define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class,	\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1960  					 class_shift, hook)		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1961  	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early,		\
0aa0f5d1084ca1c Bjorn Helgaas  2017-12-02  1962  		resume_early##hook, vendor, device, class, class_shift, hook)
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1963  #define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class,		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1964  					 class_shift, hook)		\
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1965  	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend,			\
0aa0f5d1084ca1c Bjorn Helgaas  2017-12-02  1966  		suspend##hook, vendor, device, class, class_shift, hook)
7d2a01b87f1682f Andreas Noever 2014-06-03  1967  #define DECLARE_PCI_FIXUP_CLASS_SUSPEND_LATE(vendor, device, class,	\
7d2a01b87f1682f Andreas Noever 2014-06-03  1968  					 class_shift, hook)		\
7d2a01b87f1682f Andreas Noever 2014-06-03  1969  	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend_late,		\
0aa0f5d1084ca1c Bjorn Helgaas  2017-12-02  1970  		suspend_late##hook, vendor, device, class, class_shift, hook)
f4ca5c6a56278ca Yinghai Lu     2012-02-23  1971  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 16216 bytes --]

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 11/22] pci: lto: fix PREL32 relocations
  2020-06-24 22:49   ` kernel test robot
@ 2020-06-24 23:03     ` Nick Desaulniers
  2020-06-24 23:21       ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 23:03 UTC (permalink / raw)
  To: kernel test robot
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, kbuild-all,
	Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	clang-built-linux, Kernel Hardening, linux-arch, Linux ARM

On Wed, Jun 24, 2020 at 3:50 PM kernel test robot <lkp@intel.com> wrote:
>
> Hi Sami,
>
> Thank you for the patch! Perhaps something to improve:
>
> [auto build test WARNING on 26e122e97a3d0390ebec389347f64f3730fdf48f]
>
> url:    https://github.com/0day-ci/linux/commits/Sami-Tolvanen/add-support-for-Clang-LTO/20200625-043816
> base:    26e122e97a3d0390ebec389347f64f3730fdf48f
> config: i386-alldefconfig (attached as .config)
> compiler: gcc-9 (Debian 9.3.0-13) 9.3.0
> reproduce (this is a W=1 build):
>         # save the attached .config to linux build tree
>         make W=1 ARCH=i386

Note: W=1 ^

>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All warnings (new ones prefixed by >>):
>
>    In file included from arch/x86/kernel/pci-dma.c:9:
> >> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_via_no_dac190' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~

Should `stub` be qualified as `static inline`? https://godbolt.org/z/cPBXxW
Or should stub be declared in this header, but implemented in a .c
file?  (I'm guessing the former, since the `hook` callback comes from
the macro).

> >> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
> >> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
> >> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
> >> include/linux/pci.h:1949:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1949 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
> >> arch/x86/kernel/pci-dma.c:154:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_CLASS_FINAL'
>      154 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
>          | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> --
>    In file included from arch/x86/kernel/quirks.c:6:
> >> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet180' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
> >> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
> >> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
> >> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
> >> arch/x86/kernel/quirks.c:156:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
>      156 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
>          | ^~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet181' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
> >> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
> >> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
> >> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>    arch/x86/kernel/quirks.c:158:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
>      158 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
>          | ^~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet182' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
> >> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
> >> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
> >> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>    arch/x86/kernel/quirks.c:160:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
>      160 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
>          | ^~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet183' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
>    include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
>    include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>    arch/x86/kernel/quirks.c:162:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
>      162 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
>          | ^~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet184' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
>    include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
>    include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>    arch/x86/kernel/quirks.c:164:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
>      164 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
>          | ^~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet185' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
>    include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
>    include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1976:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1976 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>    arch/x86/kernel/quirks.c:166:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_HEADER'
>      166 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
>          | ^~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_ich_force_enable_hpet186' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
>    include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
> --
>    In file included from drivers/pci/vpd.c:8:
> >> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_f0_vpd_link180' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
> >> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
> >> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
> >> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1941:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1941 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
> >> drivers/pci/vpd.c:543:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_CLASS_EARLY'
>      543 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
>          | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd181' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
> >> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
> >> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
> >> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
> >> drivers/pci/vpd.c:560:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
>      560 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd);
>          | ^~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd182' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
> >> include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
> >> include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
> >> include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
> >> include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>    drivers/pci/vpd.c:561:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
>      561 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd);
>          | ^~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd183' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
>    include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
>    include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>    drivers/pci/vpd.c:562:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
>      562 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd);
>          | ^~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd184' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
>    include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
>    include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>    drivers/pci/vpd.c:563:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
>      563 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd);
>          | ^~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd185' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                             ^~~~~~~~~~~~
>    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
>     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
>          |       ^~~~
>    include/linux/pci.h:1928:2: note: in expansion of macro '__DECLARE_PCI_FIXUP_SECTION'
>     1928 |  __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:29: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                             ^~~~~~~
>    include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
>       54 | #define __PASTE(a,b) ___PASTE(a,b)
>          |                      ^~~~~~~~
>    include/linux/compiler-gcc.h:72:37: note: in expansion of macro '__PASTE'
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
>          |                                     ^~~~~~~
>    include/linux/pci.h:1929:26: note: in expansion of macro '__UNIQUE_ID'
>     1929 |       class_shift, hook, __UNIQUE_ID(hook))
>          |                          ^~~~~~~~~~~
>    include/linux/pci.h:1979:2: note: in expansion of macro 'DECLARE_PCI_FIXUP_SECTION'
>     1979 |  DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,   \
>          |  ^~~~~~~~~~~~~~~~~~~~~~~~~
>    drivers/pci/vpd.c:564:1: note: in expansion of macro 'DECLARE_PCI_FIXUP_FINAL'
>      564 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd);
>          | ^~~~~~~~~~~~~~~~~~~~~~~
>    include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_quirk_blacklist_vpd186' [-Wmissing-prototypes]
>       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
> ..
>
> vim +/__DECLARE_PCI_FIXUP_SECTION +1928 include/linux/pci.h
>
> ^1da177e4c3f415 Linus Torvalds 2005-04-16  1910
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1911  #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
> b1b820bb0420d08 Sami Tolvanen  2020-06-24  1912  #define ___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class, \
> b1b820bb0420d08 Sami Tolvanen  2020-06-24  1913                                     class_shift, hook, stub)            \
> b1b820bb0420d08 Sami Tolvanen  2020-06-24 @1914         void stub(struct pci_dev *dev) { hook(dev); }                   \
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1915         asm(".section " #sec ", \"a\"                           \n"     \
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1916             ".balign    16                                      \n"     \
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1917             ".short "   #vendor ", " #device "                  \n"     \
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1918             ".long "    #class ", " #class_shift "              \n"     \
> b1b820bb0420d08 Sami Tolvanen  2020-06-24  1919             ".long "    #stub " - .                             \n"     \
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1920             ".previous                                          \n");
> b1b820bb0420d08 Sami Tolvanen  2020-06-24  1921
> b1b820bb0420d08 Sami Tolvanen  2020-06-24  1922  #define __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,  \
> b1b820bb0420d08 Sami Tolvanen  2020-06-24  1923                                   class_shift, hook, stub)              \
> b1b820bb0420d08 Sami Tolvanen  2020-06-24  1924         ___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,  \
> b1b820bb0420d08 Sami Tolvanen  2020-06-24  1925                                   class_shift, hook, stub)
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1926  #define DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,    \
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1927                                   class_shift, hook)                    \
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21 @1928         __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,   \
> b1b820bb0420d08 Sami Tolvanen  2020-06-24 @1929                                   class_shift, hook, __UNIQUE_ID(hook))
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1930  #else
> ^1da177e4c3f415 Linus Torvalds 2005-04-16  1931  /* Anonymous variables would be nice... */
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1932  #define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class,        \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1933                                   class_shift, hook)                    \
> ecf61c78bd787b9 Michal Marek   2013-11-11  1934         static const struct pci_fixup __PASTE(__pci_fixup_##name,__LINE__) __used       \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1935         __attribute__((__section__(#section), aligned((sizeof(void *)))))    \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1936                 = { vendor, device, class, class_shift, hook };
> c9d8b55fa019162 Ard Biesheuvel 2018-08-21  1937  #endif
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1938
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1939  #define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class,           \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1940                                          class_shift, hook)             \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1941         DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,                     \
> ecf61c78bd787b9 Michal Marek   2013-11-11  1942                 hook, vendor, device, class, class_shift, hook)
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1943  #define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class,          \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1944                                          class_shift, hook)             \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1945         DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,                    \
> ecf61c78bd787b9 Michal Marek   2013-11-11  1946                 hook, vendor, device, class, class_shift, hook)
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1947  #define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class,           \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1948                                          class_shift, hook)             \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23 @1949         DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,                     \
> ecf61c78bd787b9 Michal Marek   2013-11-11  1950                 hook, vendor, device, class, class_shift, hook)
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1951  #define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class,          \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1952                                          class_shift, hook)             \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1953         DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable,                    \
> ecf61c78bd787b9 Michal Marek   2013-11-11  1954                 hook, vendor, device, class, class_shift, hook)
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1955  #define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class,          \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1956                                          class_shift, hook)             \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1957         DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume,                    \
> 0aa0f5d1084ca1c Bjorn Helgaas  2017-12-02  1958                 resume##hook, vendor, device, class, class_shift, hook)
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1959  #define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class,    \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1960                                          class_shift, hook)             \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1961         DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early,              \
> 0aa0f5d1084ca1c Bjorn Helgaas  2017-12-02  1962                 resume_early##hook, vendor, device, class, class_shift, hook)
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1963  #define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class,         \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1964                                          class_shift, hook)             \
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1965         DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend,                   \
> 0aa0f5d1084ca1c Bjorn Helgaas  2017-12-02  1966                 suspend##hook, vendor, device, class, class_shift, hook)
> 7d2a01b87f1682f Andreas Noever 2014-06-03  1967  #define DECLARE_PCI_FIXUP_CLASS_SUSPEND_LATE(vendor, device, class,    \
> 7d2a01b87f1682f Andreas Noever 2014-06-03  1968                                          class_shift, hook)             \
> 7d2a01b87f1682f Andreas Noever 2014-06-03  1969         DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend_late,              \
> 0aa0f5d1084ca1c Bjorn Helgaas  2017-12-02  1970                 suspend_late##hook, vendor, device, class, class_shift, hook)
> f4ca5c6a56278ca Yinghai Lu     2012-02-23  1971
>
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org



-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 17/22] arm64: vdso: disable LTO
  2020-06-24 21:52     ` Sami Tolvanen
@ 2020-06-24 23:05       ` Nick Desaulniers
  2020-06-24 23:39         ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-24 23:05 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 2:52 PM Sami Tolvanen <samitolvanen@google.com> wrote:
>
> On Wed, Jun 24, 2020 at 01:58:57PM -0700, 'Nick Desaulniers' via Clang Built Linux wrote:
> > On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
> > >
> > > Filter out CC_FLAGS_LTO for the vDSO.
> >
> > Just curious about this patch (and the following one for x86's vdso),
> > do you happen to recall specifically what the issues with the vdso's
> > are?
>
> I recall the compiler optimizing away functions at some point, but as
> LTO is not really needed in the vDSO, it's just easiest to disable it
> there.

Sounds fishy; with extern linkage then I would think it's not safe to
eliminate functions.  Probably unnecessary for the initial
implementation, and something we can follow up on, but always good to
have an answer to the inevitable question "why?" in the commit
message.
-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 11/22] pci: lto: fix PREL32 relocations
  2020-06-24 23:03     ` Nick Desaulniers
@ 2020-06-24 23:21       ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 23:21 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: kernel test robot, Masahiro Yamada, Will Deacon, kbuild-all,
	Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	clang-built-linux, Kernel Hardening, linux-arch, Linux ARM

On Wed, Jun 24, 2020 at 04:03:48PM -0700, Nick Desaulniers wrote:
> On Wed, Jun 24, 2020 at 3:50 PM kernel test robot <lkp@intel.com> wrote:
> >
> > Hi Sami,
> >
> > Thank you for the patch! Perhaps something to improve:
> >
> > [auto build test WARNING on 26e122e97a3d0390ebec389347f64f3730fdf48f]
> >
> > url:    https://github.com/0day-ci/linux/commits/Sami-Tolvanen/add-support-for-Clang-LTO/20200625-043816
> > base:    26e122e97a3d0390ebec389347f64f3730fdf48f
> > config: i386-alldefconfig (attached as .config)
> > compiler: gcc-9 (Debian 9.3.0-13) 9.3.0
> > reproduce (this is a W=1 build):
> >         # save the attached .config to linux build tree
> >         make W=1 ARCH=i386
> 
> Note: W=1 ^
> 
> >
> > If you fix the issue, kindly add following tag as appropriate
> > Reported-by: kernel test robot <lkp@intel.com>
> >
> > All warnings (new ones prefixed by >>):
> >
> >    In file included from arch/x86/kernel/pci-dma.c:9:
> > >> include/linux/compiler-gcc.h:72:45: warning: no previous prototype for '__UNIQUE_ID_via_no_dac190' [-Wmissing-prototypes]
> >       72 | #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
> >          |                                             ^~~~~~~~~~~~
> >    include/linux/pci.h:1914:7: note: in definition of macro '___DECLARE_PCI_FIXUP_SECTION'
> >     1914 |  void stub(struct pci_dev *dev) { hook(dev); }   \
> >          |       ^~~~
> 
> Should `stub` be qualified as `static inline`? https://godbolt.org/z/cPBXxW
> Or should stub be declared in this header, but implemented in a .c
> file?  (I'm guessing the former, since the `hook` callback comes from
> the macro).

Does static inline guarantee that the compiler won't rename the symbol?
The purpose of this change is to have a stable symbol name, which we can
safely use in inline assembly.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 06/22] kbuild: lto: limit inlining
  2020-06-24 21:20   ` Peter Zijlstra
@ 2020-06-24 23:37     ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 23:37 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, George Burgess IV

On Wed, Jun 24, 2020 at 11:20:55PM +0200, Peter Zijlstra wrote:
> On Wed, Jun 24, 2020 at 01:31:44PM -0700, Sami Tolvanen wrote:
> > This change limits function inlining across translation unit
> > boundaries in order to reduce the binary size with LTO.
> > 
> > The -import-instr-limit flag defines a size limit, as the number
> > of LLVM IR instructions, for importing functions from other TUs.
> > The default value is 100, and decreasing it to 5 reduces the size
> > of a stripped arm64 defconfig vmlinux by 11%.
> 
> Is that also the right number for x86? What about the effect on
> performance? What did 6 do? or 4?

This is the size limit we decided on for Android after testing on
arm64, but the number is obviously a compromise between code size
and performance. I'd be happy to benchmark this further once other
concerns have been resolved.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 17/22] arm64: vdso: disable LTO
  2020-06-24 23:05       ` Nick Desaulniers
@ 2020-06-24 23:39         ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-24 23:39 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 04:05:48PM -0700, Nick Desaulniers wrote:
> On Wed, Jun 24, 2020 at 2:52 PM Sami Tolvanen <samitolvanen@google.com> wrote:
> >
> > On Wed, Jun 24, 2020 at 01:58:57PM -0700, 'Nick Desaulniers' via Clang Built Linux wrote:
> > > On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
> > > >
> > > > Filter out CC_FLAGS_LTO for the vDSO.
> > >
> > > Just curious about this patch (and the following one for x86's vdso),
> > > do you happen to recall specifically what the issues with the vdso's
> > > are?
> >
> > I recall the compiler optimizing away functions at some point, but as
> > LTO is not really needed in the vDSO, it's just easiest to disable it
> > there.
> 
> Sounds fishy; with extern linkage then I would think it's not safe to
> eliminate functions.  Probably unnecessary for the initial
> implementation, and something we can follow up on, but always good to
> have an answer to the inevitable question "why?" in the commit
> message.

Sure. I can test this again with the current toolchain to see if there
are still problems.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 17/22] arm64: vdso: disable LTO
  2020-06-24 21:09     ` Nick Desaulniers
@ 2020-06-24 23:51       ` Andi Kleen
  0 siblings, 0 replies; 213+ messages in thread
From: Andi Kleen @ 2020-06-24 23:51 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 02:09:40PM -0700, Nick Desaulniers wrote:
> On Wed, Jun 24, 2020 at 1:58 PM Nick Desaulniers
> <ndesaulniers@google.com> wrote:
> >
> > On Wed, Jun 24, 2020 at 1:33 PM Sami Tolvanen <samitolvanen@google.com> wrote:
> > >
> > > Filter out CC_FLAGS_LTO for the vDSO.
> >
> > Just curious about this patch (and the following one for x86's vdso),
> > do you happen to recall specifically what the issues with the vdso's
> > are?
> 
> + Andi (tangential, I actually have a bunch of tabs open with slides
> from http://halobates.de/ right now)
> 58edae3aac9f2
> 67424d5a22124
> $ git log -S DISABLE_LTO

I think I did it originally because the vDSO linker step didn't do
all the magic needed for gcc LTO. But it also doesn't seem to be
very useful for just a few functions that don't have complex
interactions, and somewhat risky for violating some assumptions.

-Andi

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 09/22] init: lto: ensure initcall ordering
  2020-06-24 20:31 ` [PATCH 09/22] init: lto: ensure initcall ordering Sami Tolvanen
@ 2020-06-25  0:58   ` kernel test robot
  2020-06-25  4:19   ` kernel test robot
  1 sibling, 0 replies; 213+ messages in thread
From: kernel test robot @ 2020-06-25  0:58 UTC (permalink / raw)
  To: Sami Tolvanen, Masahiro Yamada, Will Deacon
  Cc: kbuild-all, Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel


[-- Attachment #1: Type: text/plain, Size: 17039 bytes --]

Hi Sami,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on 26e122e97a3d0390ebec389347f64f3730fdf48f]

url:    https://github.com/0day-ci/linux/commits/Sami-Tolvanen/add-support-for-Clang-LTO/20200625-043816
base:    26e122e97a3d0390ebec389347f64f3730fdf48f
config: m68k-defconfig (attached as .config)
compiler: m68k-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=m68k 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All error/warnings (new ones prefixed by >>):

   In file included from arch/m68k/include/asm/io_mm.h:25,
                    from arch/m68k/include/asm/io.h:8,
                    from include/linux/io.h:13,
                    from include/linux/irq.h:20,
                    from include/asm-generic/hardirq.h:13,
                    from ./arch/m68k/include/generated/asm/hardirq.h:1,
                    from include/linux/hardirq.h:10,
                    from include/linux/interrupt.h:11,
                    from drivers/ide/gayle.c:13:
   arch/m68k/include/asm/raw_io.h: In function 'raw_rom_outsb':
   arch/m68k/include/asm/raw_io.h:83:7: warning: variable '__w' set but not used [-Wunused-but-set-variable]
      83 |  ({u8 __w, __v = (b);  u32 _addr = ((u32) (addr)); \
         |       ^~~
   arch/m68k/include/asm/raw_io.h:430:3: note: in expansion of macro 'rom_out_8'
     430 |   rom_out_8(port, *buf++);
         |   ^~~~~~~~~
   arch/m68k/include/asm/raw_io.h: In function 'raw_rom_outsw':
   arch/m68k/include/asm/raw_io.h:86:8: warning: variable '__w' set but not used [-Wunused-but-set-variable]
      86 |  ({u16 __w, __v = (w); u32 _addr = ((u32) (addr)); \
         |        ^~~
   arch/m68k/include/asm/raw_io.h:448:3: note: in expansion of macro 'rom_out_be16'
     448 |   rom_out_be16(port, *buf++);
         |   ^~~~~~~~~~~~
   arch/m68k/include/asm/raw_io.h: In function 'raw_rom_outsw_swapw':
   arch/m68k/include/asm/raw_io.h:90:8: warning: variable '__w' set but not used [-Wunused-but-set-variable]
      90 |  ({u16 __w, __v = (w); u32 _addr = ((u32) (addr)); \
         |        ^~~
   arch/m68k/include/asm/raw_io.h:466:3: note: in expansion of macro 'rom_out_le16'
     466 |   rom_out_le16(port, *buf++);
         |   ^~~~~~~~~~~~
   In file included from arch/m68k/include/asm/bug.h:32,
                    from include/linux/bug.h:5,
                    from include/linux/mmdebug.h:5,
                    from include/linux/mm.h:9,
                    from drivers/ide/gayle.c:12:
   include/linux/dma-mapping.h: In function 'dma_map_resource':
   arch/m68k/include/asm/page_mm.h:169:49: warning: ordered comparison of pointer with null pointer [-Wextra]
     169 | #define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
         |                                                 ^~
   include/asm-generic/bug.h:144:27: note: in definition of macro 'WARN_ON_ONCE'
     144 |  int __ret_warn_once = !!(condition);   \
         |                           ^~~~~~~~~
   arch/m68k/include/asm/page_mm.h:170:25: note: in expansion of macro 'virt_addr_valid'
     170 | #define pfn_valid(pfn)  virt_addr_valid(pfn_to_virt(pfn))
         |                         ^~~~~~~~~~~~~~~
   include/linux/dma-mapping.h:352:19: note: in expansion of macro 'pfn_valid'
     352 |  if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
         |                   ^~~~~~~~~
   In file included from <command-line>:
   drivers/ide/gayle.c: At top level:
>> arch/m68k/include/asm/amigayle.h:57:66: error: pasting ")" and "__279_185_amiga_gayle_ide_driver_init" does not give a valid preprocessing token
      57 | #define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
         |                                                                  ^
   include/linux/compiler_types.h:53:23: note: in definition of macro '___PASTE'
      53 | #define ___PASTE(a,b) a##b
         |                       ^
>> include/linux/init.h:189:2: note: in expansion of macro '__PASTE'
     189 |  __PASTE(__KBUILD_MODNAME,    \
         |  ^~~~~~~
>> <command-line>: note: in expansion of macro 'gayle'
>> include/linux/init.h:189:10: note: in expansion of macro '__KBUILD_MODNAME'
     189 |  __PASTE(__KBUILD_MODNAME,    \
         |          ^~~~~~~~~~~~~~~~
>> include/linux/init.h:236:35: note: in expansion of macro '__initcall_id'
     236 |  __unique_initcall(fn, id, __sec, __initcall_id(fn))
         |                                   ^~~~~~~~~~~~~
   include/linux/init.h:238:35: note: in expansion of macro '___define_initcall'
     238 | #define __define_initcall(fn, id) ___define_initcall(fn, id, .initcall##id)
         |                                   ^~~~~~~~~~~~~~~~~~
   include/linux/init.h:267:30: note: in expansion of macro '__define_initcall'
     267 | #define device_initcall(fn)  __define_initcall(fn, 6)
         |                              ^~~~~~~~~~~~~~~~~
>> include/linux/init.h:272:24: note: in expansion of macro 'device_initcall'
     272 | #define __initcall(fn) device_initcall(fn)
         |                        ^~~~~~~~~~~~~~~
>> include/linux/module.h:88:24: note: in expansion of macro '__initcall'
      88 | #define module_init(x) __initcall(x);
         |                        ^~~~~~~~~~
   include/linux/platform_device.h:271:1: note: in expansion of macro 'module_init'
     271 | module_init(__platform_driver##_init); \
         | ^~~~~~~~~~~
   drivers/ide/gayle.c:185:1: note: in expansion of macro 'module_platform_driver_probe'
     185 | module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe);
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> include/linux/init.h:200:10: error: pasting "__" and "(" does not give a valid preprocessing token
     200 |  __PASTE(__,      \
         |          ^~
   include/linux/compiler_types.h:53:23: note: in definition of macro '___PASTE'
      53 | #define ___PASTE(a,b) a##b
         |                       ^
   include/linux/init.h:200:2: note: in expansion of macro '__PASTE'
     200 |  __PASTE(__,      \
         |  ^~~~~~~
>> include/linux/init.h:232:3: note: in expansion of macro '__initcall_name'
     232 |   __initcall_name(initcall, __iid, id),  \
         |   ^~~~~~~~~~~~~~~
>> include/linux/init.h:236:2: note: in expansion of macro '__unique_initcall'
     236 |  __unique_initcall(fn, id, __sec, __initcall_id(fn))
         |  ^~~~~~~~~~~~~~~~~
   include/linux/init.h:238:35: note: in expansion of macro '___define_initcall'
     238 | #define __define_initcall(fn, id) ___define_initcall(fn, id, .initcall##id)
         |                                   ^~~~~~~~~~~~~~~~~~
   include/linux/init.h:267:30: note: in expansion of macro '__define_initcall'
     267 | #define device_initcall(fn)  __define_initcall(fn, 6)
         |                              ^~~~~~~~~~~~~~~~~
>> include/linux/init.h:272:24: note: in expansion of macro 'device_initcall'
     272 | #define __initcall(fn) device_initcall(fn)
         |                        ^~~~~~~~~~~~~~~
>> include/linux/module.h:88:24: note: in expansion of macro '__initcall'
      88 | #define module_init(x) __initcall(x);
         |                        ^~~~~~~~~~
   include/linux/platform_device.h:271:1: note: in expansion of macro 'module_init'
     271 | module_init(__platform_driver##_init); \
         | ^~~~~~~~~~~
   drivers/ide/gayle.c:185:1: note: in expansion of macro 'module_platform_driver_probe'
     185 | module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe);
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from include/linux/printk.h:6,
                    from include/linux/kernel.h:15,
                    from include/asm-generic/bug.h:19,
                    from arch/m68k/include/asm/bug.h:32,
                    from include/linux/bug.h:5,
                    from include/linux/mmdebug.h:5,
                    from include/linux/mm.h:9,
                    from drivers/ide/gayle.c:12:
>> arch/m68k/include/asm/amigayle.h:57:16: error: expected declaration specifiers or '...' before '*' token
      57 | #define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
         |                ^
   include/linux/init.h:226:20: note: in definition of macro '____define_initcall'
     226 |  static initcall_t __name __used    \
         |                    ^~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/init.h:198:2: note: in expansion of macro '__PASTE'
     198 |  __PASTE(__,      \
         |  ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/init.h:199:2: note: in expansion of macro '__PASTE'
     199 |  __PASTE(prefix,      \
         |  ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/init.h:200:2: note: in expansion of macro '__PASTE'
     200 |  __PASTE(__,      \
         |  ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/init.h:201:2: note: in expansion of macro '__PASTE'
     201 |  __PASTE(__iid, id))))
         |  ^~~~~~~
>> include/linux/init.h:232:3: note: in expansion of macro '__initcall_name'
     232 |   __initcall_name(initcall, __iid, id),  \
         |   ^~~~~~~~~~~~~~~
>> include/linux/init.h:236:2: note: in expansion of macro '__unique_initcall'
     236 |  __unique_initcall(fn, id, __sec, __initcall_id(fn))
         |  ^~~~~~~~~~~~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
>> include/linux/init.h:189:2: note: in expansion of macro '__PASTE'
     189 |  __PASTE(__KBUILD_MODNAME,    \
         |  ^~~~~~~
>> <command-line>: note: in expansion of macro 'gayle'
>> include/linux/init.h:189:10: note: in expansion of macro '__KBUILD_MODNAME'
     189 |  __PASTE(__KBUILD_MODNAME,    \
         |          ^~~~~~~~~~~~~~~~
>> include/linux/init.h:236:35: note: in expansion of macro '__initcall_id'
     236 |  __unique_initcall(fn, id, __sec, __initcall_id(fn))
         |                                   ^~~~~~~~~~~~~
   include/linux/init.h:238:35: note: in expansion of macro '___define_initcall'
     238 | #define __define_initcall(fn, id) ___define_initcall(fn, id, .initcall##id)
         |                                   ^~~~~~~~~~~~~~~~~~
   include/linux/init.h:267:30: note: in expansion of macro '__define_initcall'
     267 | #define device_initcall(fn)  __define_initcall(fn, 6)
         |                              ^~~~~~~~~~~~~~~~~
>> include/linux/init.h:272:24: note: in expansion of macro 'device_initcall'
     272 | #define __initcall(fn) device_initcall(fn)
         |                        ^~~~~~~~~~~~~~~
   include/linux/module.h:88:24: note: in expansion of macro '__initcall'
      88 | #define module_init(x) __initcall(x);
         |                        ^~~~~~~~~~
   include/linux/platform_device.h:271:1: note: in expansion of macro 'module_init'
     271 | module_init(__platform_driver##_init); \
         | ^~~~~~~~~~~
   drivers/ide/gayle.c:185:1: note: in expansion of macro 'module_platform_driver_probe'
     185 | module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe);
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from drivers/ide/gayle.c:19:
   drivers/ide/gayle.c:185:30: warning: 'amiga_gayle_ide_driver_init' defined but not used [-Wunused-function]
     185 | module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe);
         |                              ^~~~~~~~~~~~~~~~~~~~~~
   include/linux/platform_device.h:266:19: note: in definition of macro 'module_platform_driver_probe'
     266 | static int __init __platform_driver##_init(void) \
         |                   ^~~~~~~~~~~~~~~~~

vim +200 include/linux/init.h

   170	
   171	/*
   172	 * initcalls are now grouped by functionality into separate
   173	 * subsections. Ordering inside the subsections is determined
   174	 * by link order. 
   175	 * For backwards compatibility, initcall() puts the call in 
   176	 * the device init subsection.
   177	 *
   178	 * The `id' arg to __define_initcall() is needed so that multiple initcalls
   179	 * can point at the same handler without causing duplicate-symbol build errors.
   180	 *
   181	 * Initcalls are run by placing pointers in initcall sections that the
   182	 * kernel iterates at runtime. The linker can do dead code / data elimination
   183	 * and remove that completely, so the initcall sections have to be marked
   184	 * as KEEP() in the linker script.
   185	 */
   186	
   187	/* Format: <modname>__<counter>_<line>_<fn> */
   188	#define __initcall_id(fn)					\
 > 189		__PASTE(__KBUILD_MODNAME,				\
   190		__PASTE(__,						\
   191		__PASTE(__COUNTER__,					\
   192		__PASTE(_,						\
   193		__PASTE(__LINE__,					\
   194		__PASTE(_, fn))))))
   195	
   196	/* Format: __<prefix>__<iid><id> */
   197	#define __initcall_name(prefix, __iid, id)			\
   198		__PASTE(__,						\
   199		__PASTE(prefix,						\
 > 200		__PASTE(__,						\
   201		__PASTE(__iid, id))))
   202	
   203	#ifdef CONFIG_LTO_CLANG
   204	/*
   205	 * With LTO, the compiler doesn't necessarily obey link order for
   206	 * initcalls. In order to preserve the correct order, we add each
   207	 * variable into its own section and generate a linker script (in
   208	 * scripts/link-vmlinux.sh) to specify the order of the sections.
   209	 */
   210	#define __initcall_section(__sec, __iid)			\
   211		#__sec ".init.." #__iid
   212	#else
   213	#define __initcall_section(__sec, __iid)			\
   214		#__sec ".init"
   215	#endif
   216	
   217	#ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
   218	#define ____define_initcall(fn, __name, __sec)			\
   219		__ADDRESSABLE(fn)					\
   220		asm(".section	\"" __sec "\", \"a\"		\n"	\
   221		    __stringify(__name) ":			\n"	\
   222		    ".long	" #fn " - .			\n"	\
   223		    ".previous					\n");
   224	#else
   225	#define ____define_initcall(fn, __name, __sec)			\
   226		static initcall_t __name __used 			\
   227			__attribute__((__section__(__sec))) = fn;
   228	#endif
   229	
   230	#define __unique_initcall(fn, id, __sec, __iid)			\
   231		____define_initcall(fn,					\
 > 232			__initcall_name(initcall, __iid, id),		\
   233			__initcall_section(__sec, __iid))
   234	
   235	#define ___define_initcall(fn, id, __sec)			\
 > 236		__unique_initcall(fn, id, __sec, __initcall_id(fn))
   237	
   238	#define __define_initcall(fn, id) ___define_initcall(fn, id, .initcall##id)
   239	
   240	/*
   241	 * Early initcalls run before initializing SMP.
   242	 *
   243	 * Only for built-in code, not modules.
   244	 */
   245	#define early_initcall(fn)		__define_initcall(fn, early)
   246	
   247	/*
   248	 * A "pure" initcall has no dependencies on anything else, and purely
   249	 * initializes variables that couldn't be statically initialized.
   250	 *
   251	 * This only exists for built-in code, not for modules.
   252	 * Keep main.c:initcall_level_names[] in sync.
   253	 */
   254	#define pure_initcall(fn)		__define_initcall(fn, 0)
   255	
   256	#define core_initcall(fn)		__define_initcall(fn, 1)
   257	#define core_initcall_sync(fn)		__define_initcall(fn, 1s)
   258	#define postcore_initcall(fn)		__define_initcall(fn, 2)
   259	#define postcore_initcall_sync(fn)	__define_initcall(fn, 2s)
   260	#define arch_initcall(fn)		__define_initcall(fn, 3)
   261	#define arch_initcall_sync(fn)		__define_initcall(fn, 3s)
   262	#define subsys_initcall(fn)		__define_initcall(fn, 4)
   263	#define subsys_initcall_sync(fn)	__define_initcall(fn, 4s)
   264	#define fs_initcall(fn)			__define_initcall(fn, 5)
   265	#define fs_initcall_sync(fn)		__define_initcall(fn, 5s)
   266	#define rootfs_initcall(fn)		__define_initcall(fn, rootfs)
   267	#define device_initcall(fn)		__define_initcall(fn, 6)
   268	#define device_initcall_sync(fn)	__define_initcall(fn, 6s)
   269	#define late_initcall(fn)		__define_initcall(fn, 7)
   270	#define late_initcall_sync(fn)		__define_initcall(fn, 7s)
   271	
 > 272	#define __initcall(fn) device_initcall(fn)
   273	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 16942 bytes --]

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 02/22] kbuild: add support for Clang LTO
  2020-06-24 20:31 ` [PATCH 02/22] kbuild: add support for Clang LTO Sami Tolvanen
  2020-06-24 20:53   ` Nick Desaulniers
@ 2020-06-25  2:26   ` Nathan Chancellor
  2020-06-25 16:13     ` Sami Tolvanen
  1 sibling, 1 reply; 213+ messages in thread
From: Nathan Chancellor @ 2020-06-25  2:26 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

Hi Sami,

On Wed, Jun 24, 2020 at 01:31:40PM -0700, 'Sami Tolvanen' via Clang Built Linux wrote:
> This change adds build system support for Clang's Link Time
> Optimization (LTO). With -flto, instead of ELF object files, Clang
> produces LLVM bitcode, which is compiled into native code at link
> time, allowing the final binary to be optimized globally. For more
> details, see:
> 
>   https://llvm.org/docs/LinkTimeOptimization.html
> 
> The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
> which defaults to LTO being disabled. To use LTO, the architecture
> must select ARCH_SUPPORTS_LTO_CLANG and support:
> 
>   - compiling with Clang,
>   - compiling inline assembly with Clang's integrated assembler,
>   - and linking with LLD.
> 
> While using full LTO results in the best runtime performance, the
> compilation is not scalable in time or memory. CONFIG_THINLTO
> enables ThinLTO, which allows parallel optimization and faster
> incremental builds. ThinLTO is used by default if the architecture
> also selects ARCH_SUPPORTS_THINLTO:
> 
>   https://clang.llvm.org/docs/ThinLTO.html
> 
> To enable LTO, LLVM tools must be used to handle bitcode files. The
> easiest way is to pass the LLVM=1 option to make:
> 
>   $ make LLVM=1 defconfig
>   $ scripts/config -e LTO_CLANG
>   $ make LLVM=1
> 
> Alternatively, at least the following LLVM tools must be used:
> 
>   CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm
> 
> To prepare for LTO support with other compilers, common parts are
> gated behind the CONFIG_LTO option, and LTO can be disabled for
> specific files by filtering out CC_FLAGS_LTO.
> 
> Note that support for DYNAMIC_FTRACE and MODVERSIONS are added in
> follow-up patches.
> 
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
> ---
>  Makefile                          | 16 ++++++++
>  arch/Kconfig                      | 66 +++++++++++++++++++++++++++++++
>  include/asm-generic/vmlinux.lds.h | 11 ++++--
>  scripts/Makefile.build            |  9 ++++-
>  scripts/Makefile.modfinal         |  9 ++++-
>  scripts/Makefile.modpost          | 24 ++++++++++-
>  scripts/link-vmlinux.sh           | 32 +++++++++++----
>  7 files changed, 151 insertions(+), 16 deletions(-)
> 
> diff --git a/Makefile b/Makefile
> index ac2c61c37a73..0c7fe6fb2143 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -886,6 +886,22 @@ KBUILD_CFLAGS	+= $(CC_FLAGS_SCS)
>  export CC_FLAGS_SCS
>  endif
>  
> +ifdef CONFIG_LTO_CLANG
> +ifdef CONFIG_THINLTO
> +CC_FLAGS_LTO_CLANG := -flto=thin $(call cc-option, -fsplit-lto-unit)
> +KBUILD_LDFLAGS	+= --thinlto-cache-dir=.thinlto-cache
> +else
> +CC_FLAGS_LTO_CLANG := -flto
> +endif
> +CC_FLAGS_LTO_CLANG += -fvisibility=default
> +endif
> +
> +ifdef CONFIG_LTO
> +CC_FLAGS_LTO	:= $(CC_FLAGS_LTO_CLANG)
> +KBUILD_CFLAGS	+= $(CC_FLAGS_LTO)
> +export CC_FLAGS_LTO
> +endif
> +
>  # arch Makefile may override CC so keep this after arch Makefile is included
>  NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
>  
> diff --git a/arch/Kconfig b/arch/Kconfig
> index 8cc35dc556c7..e00b122293f8 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -552,6 +552,72 @@ config SHADOW_CALL_STACK
>  	  reading and writing arbitrary memory may be able to locate them
>  	  and hijack control flow by modifying the stacks.
>  
> +config LTO
> +	bool
> +
> +config ARCH_SUPPORTS_LTO_CLANG
> +	bool
> +	help
> +	  An architecture should select this option if it supports:
> +	  - compiling with Clang,
> +	  - compiling inline assembly with Clang's integrated assembler,
> +	  - and linking with LLD.
> +
> +config ARCH_SUPPORTS_THINLTO
> +	bool
> +	help
> +	  An architecture should select this option if it supports Clang's
> +	  ThinLTO.
> +
> +config THINLTO
> +	bool "Clang ThinLTO"
> +	depends on LTO_CLANG && ARCH_SUPPORTS_THINLTO
> +	default y
> +	help
> +	  This option enables Clang's ThinLTO, which allows for parallel
> +	  optimization and faster incremental compiles. More information
> +	  can be found from Clang's documentation:
> +
> +	    https://clang.llvm.org/docs/ThinLTO.html
> +
> +choice
> +	prompt "Link Time Optimization (LTO)"
> +	default LTO_NONE
> +	help
> +	  This option enables Link Time Optimization (LTO), which allows the
> +	  compiler to optimize binaries globally.
> +
> +	  If unsure, select LTO_NONE.
> +
> +config LTO_NONE
> +	bool "None"
> +
> +config LTO_CLANG
> +	bool "Clang's Link Time Optimization (EXPERIMENTAL)"
> +	depends on CC_IS_CLANG && CLANG_VERSION >= 110000 && LD_IS_LLD

I am curious, what is the reason for gating this at clang 11.0.0?

Presumably this? https://github.com/ClangBuiltLinux/linux/issues/510

It might be nice to notate this so that we do not have to wonder :)

Cheers,
Nathan

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 09/22] init: lto: ensure initcall ordering
  2020-06-24 20:31 ` [PATCH 09/22] init: lto: ensure initcall ordering Sami Tolvanen
  2020-06-25  0:58   ` kernel test robot
@ 2020-06-25  4:19   ` kernel test robot
  1 sibling, 0 replies; 213+ messages in thread
From: kernel test robot @ 2020-06-25  4:19 UTC (permalink / raw)
  To: Sami Tolvanen, Masahiro Yamada, Will Deacon
  Cc: kbuild-all, Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel


[-- Attachment #1: Type: text/plain, Size: 11769 bytes --]

Hi Sami,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on 26e122e97a3d0390ebec389347f64f3730fdf48f]

url:    https://github.com/0day-ci/linux/commits/Sami-Tolvanen/add-support-for-Clang-LTO/20200625-043816
base:    26e122e97a3d0390ebec389347f64f3730fdf48f
config: m68k-allyesconfig (attached as .config)
compiler: m68k-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=m68k 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from arch/m68k/include/asm/io_mm.h:25,
                    from arch/m68k/include/asm/io.h:8,
                    from include/linux/io.h:13,
                    from include/linux/irq.h:20,
                    from include/asm-generic/hardirq.h:13,
                    from ./arch/m68k/include/generated/asm/hardirq.h:1,
                    from include/linux/hardirq.h:10,
                    from include/linux/interrupt.h:11,
                    from drivers/ide/gayle.c:13:
   arch/m68k/include/asm/raw_io.h: In function 'raw_rom_outsb':
   arch/m68k/include/asm/raw_io.h:83:7: warning: variable '__w' set but not used [-Wunused-but-set-variable]
      83 |  ({u8 __w, __v = (b);  u32 _addr = ((u32) (addr)); \
         |       ^~~
   arch/m68k/include/asm/raw_io.h:430:3: note: in expansion of macro 'rom_out_8'
     430 |   rom_out_8(port, *buf++);
         |   ^~~~~~~~~
   arch/m68k/include/asm/raw_io.h: In function 'raw_rom_outsw':
   arch/m68k/include/asm/raw_io.h:86:8: warning: variable '__w' set but not used [-Wunused-but-set-variable]
      86 |  ({u16 __w, __v = (w); u32 _addr = ((u32) (addr)); \
         |        ^~~
   arch/m68k/include/asm/raw_io.h:448:3: note: in expansion of macro 'rom_out_be16'
     448 |   rom_out_be16(port, *buf++);
         |   ^~~~~~~~~~~~
   arch/m68k/include/asm/raw_io.h: In function 'raw_rom_outsw_swapw':
   arch/m68k/include/asm/raw_io.h:90:8: warning: variable '__w' set but not used [-Wunused-but-set-variable]
      90 |  ({u16 __w, __v = (w); u32 _addr = ((u32) (addr)); \
         |        ^~~
   arch/m68k/include/asm/raw_io.h:466:3: note: in expansion of macro 'rom_out_le16'
     466 |   rom_out_le16(port, *buf++);
         |   ^~~~~~~~~~~~
   In file included from include/asm-generic/bug.h:5,
                    from arch/m68k/include/asm/bug.h:32,
                    from include/linux/bug.h:5,
                    from include/linux/mmdebug.h:5,
                    from include/linux/mm.h:9,
                    from drivers/ide/gayle.c:12:
   include/linux/scatterlist.h: In function 'sg_set_buf':
   arch/m68k/include/asm/page_mm.h:169:49: warning: ordered comparison of pointer with null pointer [-Wextra]
     169 | #define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
         |                                                 ^~
   include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
      78 | # define unlikely(x) __builtin_expect(!!(x), 0)
         |                                          ^
   include/linux/scatterlist.h:143:2: note: in expansion of macro 'BUG_ON'
     143 |  BUG_ON(!virt_addr_valid(buf));
         |  ^~~~~~
   include/linux/scatterlist.h:143:10: note: in expansion of macro 'virt_addr_valid'
     143 |  BUG_ON(!virt_addr_valid(buf));
         |          ^~~~~~~~~~~~~~~
   In file included from arch/m68k/include/asm/bug.h:32,
                    from include/linux/bug.h:5,
                    from include/linux/mmdebug.h:5,
                    from include/linux/mm.h:9,
                    from drivers/ide/gayle.c:12:
   include/linux/dma-mapping.h: In function 'dma_map_resource':
   arch/m68k/include/asm/page_mm.h:169:49: warning: ordered comparison of pointer with null pointer [-Wextra]
     169 | #define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
         |                                                 ^~
   include/asm-generic/bug.h:144:27: note: in definition of macro 'WARN_ON_ONCE'
     144 |  int __ret_warn_once = !!(condition);   \
         |                           ^~~~~~~~~
   arch/m68k/include/asm/page_mm.h:170:25: note: in expansion of macro 'virt_addr_valid'
     170 | #define pfn_valid(pfn)  virt_addr_valid(pfn_to_virt(pfn))
         |                         ^~~~~~~~~~~~~~~
   include/linux/dma-mapping.h:352:19: note: in expansion of macro 'pfn_valid'
     352 |  if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
         |                   ^~~~~~~~~
   In file included from <command-line>:
   drivers/ide/gayle.c: At top level:
>> arch/m68k/include/asm/amigayle.h:57:66: error: pasting ")" and "__282_185_amiga_gayle_ide_driver_init" does not give a valid preprocessing token
      57 | #define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
         |                                                                  ^
   include/linux/compiler_types.h:53:23: note: in definition of macro '___PASTE'
      53 | #define ___PASTE(a,b) a##b
         |                       ^
   include/linux/init.h:189:2: note: in expansion of macro '__PASTE'
     189 |  __PASTE(__KBUILD_MODNAME,    \
         |  ^~~~~~~
   <command-line>: note: in expansion of macro 'gayle'
   include/linux/init.h:189:10: note: in expansion of macro '__KBUILD_MODNAME'
     189 |  __PASTE(__KBUILD_MODNAME,    \
         |          ^~~~~~~~~~~~~~~~
   include/linux/init.h:236:35: note: in expansion of macro '__initcall_id'
     236 |  __unique_initcall(fn, id, __sec, __initcall_id(fn))
         |                                   ^~~~~~~~~~~~~
   include/linux/init.h:238:35: note: in expansion of macro '___define_initcall'
     238 | #define __define_initcall(fn, id) ___define_initcall(fn, id, .initcall##id)
         |                                   ^~~~~~~~~~~~~~~~~~
   include/linux/init.h:267:30: note: in expansion of macro '__define_initcall'
     267 | #define device_initcall(fn)  __define_initcall(fn, 6)
         |                              ^~~~~~~~~~~~~~~~~
   include/linux/init.h:272:24: note: in expansion of macro 'device_initcall'
     272 | #define __initcall(fn) device_initcall(fn)
         |                        ^~~~~~~~~~~~~~~
   include/linux/module.h:88:24: note: in expansion of macro '__initcall'
      88 | #define module_init(x) __initcall(x);
         |                        ^~~~~~~~~~
   include/linux/platform_device.h:271:1: note: in expansion of macro 'module_init'
     271 | module_init(__platform_driver##_init); \
         | ^~~~~~~~~~~
   drivers/ide/gayle.c:185:1: note: in expansion of macro 'module_platform_driver_probe'
     185 | module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe);
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/init.h:200:10: error: pasting "__" and "(" does not give a valid preprocessing token
     200 |  __PASTE(__,      \
         |          ^~
   include/linux/compiler_types.h:53:23: note: in definition of macro '___PASTE'
      53 | #define ___PASTE(a,b) a##b
         |                       ^
   include/linux/init.h:200:2: note: in expansion of macro '__PASTE'
     200 |  __PASTE(__,      \
         |  ^~~~~~~
   include/linux/init.h:232:3: note: in expansion of macro '__initcall_name'
     232 |   __initcall_name(initcall, __iid, id),  \
         |   ^~~~~~~~~~~~~~~
   include/linux/init.h:236:2: note: in expansion of macro '__unique_initcall'
     236 |  __unique_initcall(fn, id, __sec, __initcall_id(fn))
         |  ^~~~~~~~~~~~~~~~~
   include/linux/init.h:238:35: note: in expansion of macro '___define_initcall'
     238 | #define __define_initcall(fn, id) ___define_initcall(fn, id, .initcall##id)
         |                                   ^~~~~~~~~~~~~~~~~~
   include/linux/init.h:267:30: note: in expansion of macro '__define_initcall'
     267 | #define device_initcall(fn)  __define_initcall(fn, 6)
         |                              ^~~~~~~~~~~~~~~~~
   include/linux/init.h:272:24: note: in expansion of macro 'device_initcall'
     272 | #define __initcall(fn) device_initcall(fn)
         |                        ^~~~~~~~~~~~~~~
   include/linux/module.h:88:24: note: in expansion of macro '__initcall'
      88 | #define module_init(x) __initcall(x);
         |                        ^~~~~~~~~~
   include/linux/platform_device.h:271:1: note: in expansion of macro 'module_init'
     271 | module_init(__platform_driver##_init); \
         | ^~~~~~~~~~~
   drivers/ide/gayle.c:185:1: note: in expansion of macro 'module_platform_driver_probe'
     185 | module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe);
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from include/linux/printk.h:6,
                    from include/linux/kernel.h:15,
                    from include/asm-generic/bug.h:19,
                    from arch/m68k/include/asm/bug.h:32,
                    from include/linux/bug.h:5,
                    from include/linux/mmdebug.h:5,
                    from include/linux/mm.h:9,
                    from drivers/ide/gayle.c:12:
   arch/m68k/include/asm/amigayle.h:57:16: error: expected declaration specifiers or '...' before '*' token
      57 | #define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
         |                ^
   include/linux/init.h:226:20: note: in definition of macro '____define_initcall'
     226 |  static initcall_t __name __used    \
         |                    ^~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/init.h:198:2: note: in expansion of macro '__PASTE'
     198 |  __PASTE(__,      \
         |  ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/init.h:199:2: note: in expansion of macro '__PASTE'
     199 |  __PASTE(prefix,      \
         |  ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)
         |                      ^~~~~~~~
   include/linux/init.h:200:2: note: in expansion of macro '__PASTE'
     200 |  __PASTE(__,      \
         |  ^~~~~~~
   include/linux/compiler_types.h:54:22: note: in expansion of macro '___PASTE'
      54 | #define __PASTE(a,b) ___PASTE(a,b)

vim +57 arch/m68k/include/asm/amigayle.h

^1da177e4c3f41 include/asm-m68k/amigayle.h Linus Torvalds 2005-04-16  53  
^1da177e4c3f41 include/asm-m68k/amigayle.h Linus Torvalds 2005-04-16  54  #define GAYLE_RESET	(0xa40000)	/* write 0x00 to start reset,
^1da177e4c3f41 include/asm-m68k/amigayle.h Linus Torvalds 2005-04-16  55                                             read 1 byte to stop reset */
^1da177e4c3f41 include/asm-m68k/amigayle.h Linus Torvalds 2005-04-16  56  
^1da177e4c3f41 include/asm-m68k/amigayle.h Linus Torvalds 2005-04-16 @57  #define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
^1da177e4c3f41 include/asm-m68k/amigayle.h Linus Torvalds 2005-04-16  58  #define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET))
^1da177e4c3f41 include/asm-m68k/amigayle.h Linus Torvalds 2005-04-16  59  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 57533 bytes --]

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 04/22] kbuild: lto: fix recordmcount
  2020-06-24 21:45     ` Sami Tolvanen
@ 2020-06-25  7:45       ` Peter Zijlstra
  2020-06-25 16:15         ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-25  7:45 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Steven Rostedt, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 02:45:30PM -0700, Sami Tolvanen wrote:
> On Wed, Jun 24, 2020 at 11:27:37PM +0200, Peter Zijlstra wrote:
> > On Wed, Jun 24, 2020 at 01:31:42PM -0700, Sami Tolvanen wrote:
> > > With LTO, LLVM bitcode won't be compiled into native code until
> > > modpost_link. This change postpones calls to recordmcount until after
> > > this step.
> > > 
> > > In order to exclude specific functions from inspection, we add a new
> > > code section .text..nomcount, which we tell recordmcount to ignore, and
> > > a __nomcount attribute for moving functions to this section.
> > 
> > I'm confused, you only add this to functions in ftrace itself, which is
> > compiled with:
> > 
> >  KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
> > 
> > and so should not have mcount/fentry sites anyway. So what's the point
> > of ignoring them further?
> > 
> > This Changelog does not explain.
> 
> Normally, recordmcount ignores each ftrace.o file, but since we are
> running it on vmlinux.o, we need another way to stop it from looking
> at references to mcount/fentry that are not calls. Here's a comment
> from recordmcount.c:
> 
>   /*
>    * The file kernel/trace/ftrace.o references the mcount
>    * function but does not call it. Since ftrace.o should
>    * not be traced anyway, we just skip it.
>    */
> 
> But I agree, the commit message could use more defails. Also +Steven
> for thoughts about this approach.

Ah, is thi because recordmcount isn't smart enough to know the
difference between "CALL $mcount" and any other RELA that has mcount?

At least for x86_64 I can do a really quick take for a recordmcount pass
in objtool, but I suppose you also need this for ARM64 ?

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 05/22] kbuild: lto: postpone objtool
  2020-06-24 21:49     ` Sami Tolvanen
@ 2020-06-25  7:47       ` Peter Zijlstra
  2020-06-25 16:22         ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-25  7:47 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 02:49:25PM -0700, Sami Tolvanen wrote:
> On Wed, Jun 24, 2020 at 11:19:08PM +0200, Peter Zijlstra wrote:
> > On Wed, Jun 24, 2020 at 01:31:43PM -0700, Sami Tolvanen wrote:
> > > diff --git a/include/linux/compiler.h b/include/linux/compiler.h
> > > index 30827f82ad62..12b115152532 100644
> > > --- a/include/linux/compiler.h
> > > +++ b/include/linux/compiler.h
> > > @@ -120,7 +120,7 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
> > >  /* Annotate a C jump table to allow objtool to follow the code flow */
> > >  #define __annotate_jump_table __section(.rodata..c_jump_table)
> > >  
> > > -#ifdef CONFIG_DEBUG_ENTRY
> > > +#if defined(CONFIG_DEBUG_ENTRY) || defined(CONFIG_LTO_CLANG)
> > >  /* Begin/end of an instrumentation safe region */
> > >  #define instrumentation_begin() ({					\
> > >  	asm volatile("%c0:\n\t"						\
> > 
> > Why would you be doing noinstr validation for lto builds? That doesn't
> > make sense.
> 
> This is just to avoid a ton of noinstr warnings when we run objtool on
> vmlinux.o, but I'm also fine with skipping noinstr validation with LTO.

Right, then we need to make --no-vmlinux work properly when
!DEBUG_ENTRY, which I think might be buggered due to us overriding the
argument when the objname ends with "vmlinux.o".

> > > +ifdef CONFIG_STACK_VALIDATION
> > > +ifneq ($(SKIP_STACK_VALIDATION),1)
> > > +cmd_ld_ko_o +=								\
> > > +	$(objtree)/tools/objtool/objtool				\
> > > +		$(if $(CONFIG_UNWINDER_ORC),orc generate,check)		\
> > > +		--module						\
> > > +		$(if $(CONFIG_FRAME_POINTER),,--no-fp)			\
> > > +		$(if $(CONFIG_GCOV_KERNEL),--no-unreachable,)		\
> > > +		$(if $(CONFIG_RETPOLINE),--retpoline,)			\
> > > +		$(if $(CONFIG_X86_SMAP),--uaccess,)			\
> > > +		$(@:.ko=$(prelink-ext).o);
> > > +
> > > +endif # SKIP_STACK_VALIDATION
> > > +endif # CONFIG_STACK_VALIDATION
> > 
> > What about the objtool invocation from link-vmlinux.sh ?
> 
> What about it? The existing objtool_link invocation in link-vmlinux.sh
> works fine for our purposes as well.

Well, I was wondering why you're adding yet another objtool invocation
while we already have one.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-24 21:31   ` Nick Desaulniers
@ 2020-06-25  8:03     ` Peter Zijlstra
  2020-06-25  8:24       ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-25  8:03 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jun 24, 2020 at 02:31:36PM -0700, Nick Desaulniers wrote:
> On Wed, Jun 24, 2020 at 2:15 PM Peter Zijlstra <peterz@infradead.org> wrote:
> >
> > On Wed, Jun 24, 2020 at 01:31:38PM -0700, Sami Tolvanen wrote:
> > > This patch series adds support for building x86_64 and arm64 kernels
> > > with Clang's Link Time Optimization (LTO).
> > >
> > > In addition to performance, the primary motivation for LTO is to allow
> > > Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> > > Pixel devices have shipped with LTO+CFI kernels since 2018.
> > >
> > > Most of the patches are build system changes for handling LLVM bitcode,
> > > which Clang produces with LTO instead of ELF object files, postponing
> > > ELF processing until a later stage, and ensuring initcall ordering.
> > >
> > > Note that first objtool patch in the series is already in linux-next,
> > > but as it's needed with LTO, I'm including it also here to make testing
> > > easier.
> >
> > I'm very sad that yet again, memory ordering isn't addressed. LTO vastly
> > increases the range of the optimizer to wreck things.
> 
> Hi Peter, could you expand on the issue for the folks on the thread?
> I'm happy to try to hack something up in LLVM if we check that X does
> or does not happen; maybe we can even come up with some concrete test
> cases that can be added to LLVM's codebase?

I'm sure Will will respond, but the basic issue is the trainwreck C11
made of dependent loads.

Anyway, here's a link to the last time this came up:

  https://lore.kernel.org/linux-arm-kernel/20171116174830.GX3624@linux.vnet.ibm.com/

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-25  8:03     ` Peter Zijlstra
@ 2020-06-25  8:24       ` Peter Zijlstra
  2020-06-25  8:57         ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-25  8:24 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Thu, Jun 25, 2020 at 10:03:13AM +0200, Peter Zijlstra wrote:
> On Wed, Jun 24, 2020 at 02:31:36PM -0700, Nick Desaulniers wrote:
> > On Wed, Jun 24, 2020 at 2:15 PM Peter Zijlstra <peterz@infradead.org> wrote:
> > >
> > > On Wed, Jun 24, 2020 at 01:31:38PM -0700, Sami Tolvanen wrote:
> > > > This patch series adds support for building x86_64 and arm64 kernels
> > > > with Clang's Link Time Optimization (LTO).
> > > >
> > > > In addition to performance, the primary motivation for LTO is to allow
> > > > Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> > > > Pixel devices have shipped with LTO+CFI kernels since 2018.
> > > >
> > > > Most of the patches are build system changes for handling LLVM bitcode,
> > > > which Clang produces with LTO instead of ELF object files, postponing
> > > > ELF processing until a later stage, and ensuring initcall ordering.
> > > >
> > > > Note that first objtool patch in the series is already in linux-next,
> > > > but as it's needed with LTO, I'm including it also here to make testing
> > > > easier.
> > >
> > > I'm very sad that yet again, memory ordering isn't addressed. LTO vastly
> > > increases the range of the optimizer to wreck things.
> > 
> > Hi Peter, could you expand on the issue for the folks on the thread?
> > I'm happy to try to hack something up in LLVM if we check that X does
> > or does not happen; maybe we can even come up with some concrete test
> > cases that can be added to LLVM's codebase?
> 
> I'm sure Will will respond, but the basic issue is the trainwreck C11
> made of dependent loads.
> 
> Anyway, here's a link to the last time this came up:
> 
>   https://lore.kernel.org/linux-arm-kernel/20171116174830.GX3624@linux.vnet.ibm.com/

Another good read:

  https://lore.kernel.org/lkml/20150520005510.GA23559@linux.vnet.ibm.com/

and having (partially) re-read that, I now worry intensily about things
like latch_tree_find(), cyc2ns_read_begin, __ktime_get_fast_ns().

It looks like kernel/time/sched_clock.c uses raw_read_seqcount() which
deviates from the above patterns by, for some reason, using a primitive
that includes an extra smp_rmb().

And this is just the few things I could remember off the top of my head,
who knows what else is out there.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-24 21:30   ` Sami Tolvanen
@ 2020-06-25  8:27     ` Will Deacon
  0 siblings, 0 replies; 213+ messages in thread
From: Will Deacon @ 2020-06-25  8:27 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Peter Zijlstra, Masahiro Yamada, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 02:30:14PM -0700, Sami Tolvanen wrote:
> On Wed, Jun 24, 2020 at 11:15:40PM +0200, Peter Zijlstra wrote:
> > On Wed, Jun 24, 2020 at 01:31:38PM -0700, Sami Tolvanen wrote:
> > > This patch series adds support for building x86_64 and arm64 kernels
> > > with Clang's Link Time Optimization (LTO).
> > > 
> > > In addition to performance, the primary motivation for LTO is to allow
> > > Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> > > Pixel devices have shipped with LTO+CFI kernels since 2018.
> > > 
> > > Most of the patches are build system changes for handling LLVM bitcode,
> > > which Clang produces with LTO instead of ELF object files, postponing
> > > ELF processing until a later stage, and ensuring initcall ordering.
> > > 
> > > Note that first objtool patch in the series is already in linux-next,
> > > but as it's needed with LTO, I'm including it also here to make testing
> > > easier.
> > 
> > I'm very sad that yet again, memory ordering isn't addressed. LTO vastly
> > increases the range of the optimizer to wreck things.
> 
> I believe Will has some thoughts about this, and patches, but I'll let
> him talk about it.

Thanks for reminding me! I will get patches out ASAP (I've been avoiding the
rebase from hell, but this is the motivation I need).

Will

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-25  8:24       ` Peter Zijlstra
@ 2020-06-25  8:57         ` Peter Zijlstra
  2020-06-30 19:19           ` Marco Elver
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-25  8:57 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, Linux ARM, Linux Kbuild mailing list, LKML,
	linux-pci, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Thu, Jun 25, 2020 at 10:24:33AM +0200, Peter Zijlstra wrote:
> On Thu, Jun 25, 2020 at 10:03:13AM +0200, Peter Zijlstra wrote:

> > I'm sure Will will respond, but the basic issue is the trainwreck C11
> > made of dependent loads.
> > 
> > Anyway, here's a link to the last time this came up:
> > 
> >   https://lore.kernel.org/linux-arm-kernel/20171116174830.GX3624@linux.vnet.ibm.com/
> 
> Another good read:
> 
>   https://lore.kernel.org/lkml/20150520005510.GA23559@linux.vnet.ibm.com/
> 
> and having (partially) re-read that, I now worry intensily about things
> like latch_tree_find(), cyc2ns_read_begin, __ktime_get_fast_ns().
> 
> It looks like kernel/time/sched_clock.c uses raw_read_seqcount() which
> deviates from the above patterns by, for some reason, using a primitive
> that includes an extra smp_rmb().
> 
> And this is just the few things I could remember off the top of my head,
> who knows what else is out there.

As an example, let us consider __ktime_get_fast_ns(), the critical bit
is:

		seq = raw_read_seqcount_latch(&tkf->seq);
		tkr = tkf->base + (seq & 0x01);
		now = tkr->base;

And we hard rely on that being a dependent load, so:

  LOAD	seq, (tkf->seq)
  LOAD  tkr, tkf->base
  AND   seq, 1
  MUL   seq, sizeof(tk_read_base)
  ADD	tkr, seq
  LOAD  now, (tkr->base)

Such that we obtain 'now' as a direct dependency on 'seq'. This ensures
the loads are ordered.

A compiler can wreck this by translating it into something like:

  LOAD	seq, (tkf->seq)
  LOAD  tkr, tkf->base
  AND   seq, 1
  CMP	seq, 0
  JE	1f
  ADD	tkr, sizeof(tk_read_base)
1:
  LOAD  now, (tkr->base)

Because now the machine can speculate and load now before seq, breaking
the ordering.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 02/22] kbuild: add support for Clang LTO
  2020-06-25  2:26   ` Nathan Chancellor
@ 2020-06-25 16:13     ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-25 16:13 UTC (permalink / raw)
  To: Nathan Chancellor
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Wed, Jun 24, 2020 at 07:26:47PM -0700, Nathan Chancellor wrote:
> Hi Sami,
> 
> On Wed, Jun 24, 2020 at 01:31:40PM -0700, 'Sami Tolvanen' via Clang Built Linux wrote:
> > This change adds build system support for Clang's Link Time
> > Optimization (LTO). With -flto, instead of ELF object files, Clang
> > produces LLVM bitcode, which is compiled into native code at link
> > time, allowing the final binary to be optimized globally. For more
> > details, see:
> > 
> >   https://llvm.org/docs/LinkTimeOptimization.html
> > 
> > The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
> > which defaults to LTO being disabled. To use LTO, the architecture
> > must select ARCH_SUPPORTS_LTO_CLANG and support:
> > 
> >   - compiling with Clang,
> >   - compiling inline assembly with Clang's integrated assembler,
> >   - and linking with LLD.
> > 
> > While using full LTO results in the best runtime performance, the
> > compilation is not scalable in time or memory. CONFIG_THINLTO
> > enables ThinLTO, which allows parallel optimization and faster
> > incremental builds. ThinLTO is used by default if the architecture
> > also selects ARCH_SUPPORTS_THINLTO:
> > 
> >   https://clang.llvm.org/docs/ThinLTO.html
> > 
> > To enable LTO, LLVM tools must be used to handle bitcode files. The
> > easiest way is to pass the LLVM=1 option to make:
> > 
> >   $ make LLVM=1 defconfig
> >   $ scripts/config -e LTO_CLANG
> >   $ make LLVM=1
> > 
> > Alternatively, at least the following LLVM tools must be used:
> > 
> >   CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm
> > 
> > To prepare for LTO support with other compilers, common parts are
> > gated behind the CONFIG_LTO option, and LTO can be disabled for
> > specific files by filtering out CC_FLAGS_LTO.
> > 
> > Note that support for DYNAMIC_FTRACE and MODVERSIONS are added in
> > follow-up patches.
> > 
> > Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
> > ---
> >  Makefile                          | 16 ++++++++
> >  arch/Kconfig                      | 66 +++++++++++++++++++++++++++++++
> >  include/asm-generic/vmlinux.lds.h | 11 ++++--
> >  scripts/Makefile.build            |  9 ++++-
> >  scripts/Makefile.modfinal         |  9 ++++-
> >  scripts/Makefile.modpost          | 24 ++++++++++-
> >  scripts/link-vmlinux.sh           | 32 +++++++++++----
> >  7 files changed, 151 insertions(+), 16 deletions(-)
> > 
> > diff --git a/Makefile b/Makefile
> > index ac2c61c37a73..0c7fe6fb2143 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -886,6 +886,22 @@ KBUILD_CFLAGS	+= $(CC_FLAGS_SCS)
> >  export CC_FLAGS_SCS
> >  endif
> >  
> > +ifdef CONFIG_LTO_CLANG
> > +ifdef CONFIG_THINLTO
> > +CC_FLAGS_LTO_CLANG := -flto=thin $(call cc-option, -fsplit-lto-unit)
> > +KBUILD_LDFLAGS	+= --thinlto-cache-dir=.thinlto-cache
> > +else
> > +CC_FLAGS_LTO_CLANG := -flto
> > +endif
> > +CC_FLAGS_LTO_CLANG += -fvisibility=default
> > +endif
> > +
> > +ifdef CONFIG_LTO
> > +CC_FLAGS_LTO	:= $(CC_FLAGS_LTO_CLANG)
> > +KBUILD_CFLAGS	+= $(CC_FLAGS_LTO)
> > +export CC_FLAGS_LTO
> > +endif
> > +
> >  # arch Makefile may override CC so keep this after arch Makefile is included
> >  NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
> >  
> > diff --git a/arch/Kconfig b/arch/Kconfig
> > index 8cc35dc556c7..e00b122293f8 100644
> > --- a/arch/Kconfig
> > +++ b/arch/Kconfig
> > @@ -552,6 +552,72 @@ config SHADOW_CALL_STACK
> >  	  reading and writing arbitrary memory may be able to locate them
> >  	  and hijack control flow by modifying the stacks.
> >  
> > +config LTO
> > +	bool
> > +
> > +config ARCH_SUPPORTS_LTO_CLANG
> > +	bool
> > +	help
> > +	  An architecture should select this option if it supports:
> > +	  - compiling with Clang,
> > +	  - compiling inline assembly with Clang's integrated assembler,
> > +	  - and linking with LLD.
> > +
> > +config ARCH_SUPPORTS_THINLTO
> > +	bool
> > +	help
> > +	  An architecture should select this option if it supports Clang's
> > +	  ThinLTO.
> > +
> > +config THINLTO
> > +	bool "Clang ThinLTO"
> > +	depends on LTO_CLANG && ARCH_SUPPORTS_THINLTO
> > +	default y
> > +	help
> > +	  This option enables Clang's ThinLTO, which allows for parallel
> > +	  optimization and faster incremental compiles. More information
> > +	  can be found from Clang's documentation:
> > +
> > +	    https://clang.llvm.org/docs/ThinLTO.html
> > +
> > +choice
> > +	prompt "Link Time Optimization (LTO)"
> > +	default LTO_NONE
> > +	help
> > +	  This option enables Link Time Optimization (LTO), which allows the
> > +	  compiler to optimize binaries globally.
> > +
> > +	  If unsure, select LTO_NONE.
> > +
> > +config LTO_NONE
> > +	bool "None"
> > +
> > +config LTO_CLANG
> > +	bool "Clang's Link Time Optimization (EXPERIMENTAL)"
> > +	depends on CC_IS_CLANG && CLANG_VERSION >= 110000 && LD_IS_LLD
> 
> I am curious, what is the reason for gating this at clang 11.0.0?
> 
> Presumably this? https://github.com/ClangBuiltLinux/linux/issues/510
> 
> It might be nice to notate this so that we do not have to wonder :)

Yes, that's the reason. I'll add a note about it. Thanks!

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 04/22] kbuild: lto: fix recordmcount
  2020-06-25  7:45       ` Peter Zijlstra
@ 2020-06-25 16:15         ` Sami Tolvanen
  2020-06-25 20:02           ` [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-25 16:15 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Steven Rostedt, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Thu, Jun 25, 2020 at 09:45:30AM +0200, Peter Zijlstra wrote:
> On Wed, Jun 24, 2020 at 02:45:30PM -0700, Sami Tolvanen wrote:
> > On Wed, Jun 24, 2020 at 11:27:37PM +0200, Peter Zijlstra wrote:
> > > On Wed, Jun 24, 2020 at 01:31:42PM -0700, Sami Tolvanen wrote:
> > > > With LTO, LLVM bitcode won't be compiled into native code until
> > > > modpost_link. This change postpones calls to recordmcount until after
> > > > this step.
> > > > 
> > > > In order to exclude specific functions from inspection, we add a new
> > > > code section .text..nomcount, which we tell recordmcount to ignore, and
> > > > a __nomcount attribute for moving functions to this section.
> > > 
> > > I'm confused, you only add this to functions in ftrace itself, which is
> > > compiled with:
> > > 
> > >  KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
> > > 
> > > and so should not have mcount/fentry sites anyway. So what's the point
> > > of ignoring them further?
> > > 
> > > This Changelog does not explain.
> > 
> > Normally, recordmcount ignores each ftrace.o file, but since we are
> > running it on vmlinux.o, we need another way to stop it from looking
> > at references to mcount/fentry that are not calls. Here's a comment
> > from recordmcount.c:
> > 
> >   /*
> >    * The file kernel/trace/ftrace.o references the mcount
> >    * function but does not call it. Since ftrace.o should
> >    * not be traced anyway, we just skip it.
> >    */
> > 
> > But I agree, the commit message could use more defails. Also +Steven
> > for thoughts about this approach.
> 
> Ah, is thi because recordmcount isn't smart enough to know the
> difference between "CALL $mcount" and any other RELA that has mcount?

Yes.

> At least for x86_64 I can do a really quick take for a recordmcount pass
> in objtool, but I suppose you also need this for ARM64 ?

Sure, sounds good. arm64 uses -fpatchable-function-entry with clang, so we
don't need recordmcount there.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 05/22] kbuild: lto: postpone objtool
  2020-06-25  7:47       ` Peter Zijlstra
@ 2020-06-25 16:22         ` Sami Tolvanen
  2020-06-25 18:33           ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-25 16:22 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Thu, Jun 25, 2020 at 09:47:16AM +0200, Peter Zijlstra wrote:
> On Wed, Jun 24, 2020 at 02:49:25PM -0700, Sami Tolvanen wrote:
> > On Wed, Jun 24, 2020 at 11:19:08PM +0200, Peter Zijlstra wrote:
> > > On Wed, Jun 24, 2020 at 01:31:43PM -0700, Sami Tolvanen wrote:
> > > > diff --git a/include/linux/compiler.h b/include/linux/compiler.h
> > > > index 30827f82ad62..12b115152532 100644
> > > > --- a/include/linux/compiler.h
> > > > +++ b/include/linux/compiler.h
> > > > @@ -120,7 +120,7 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
> > > >  /* Annotate a C jump table to allow objtool to follow the code flow */
> > > >  #define __annotate_jump_table __section(.rodata..c_jump_table)
> > > >  
> > > > -#ifdef CONFIG_DEBUG_ENTRY
> > > > +#if defined(CONFIG_DEBUG_ENTRY) || defined(CONFIG_LTO_CLANG)
> > > >  /* Begin/end of an instrumentation safe region */
> > > >  #define instrumentation_begin() ({					\
> > > >  	asm volatile("%c0:\n\t"						\
> > > 
> > > Why would you be doing noinstr validation for lto builds? That doesn't
> > > make sense.
> > 
> > This is just to avoid a ton of noinstr warnings when we run objtool on
> > vmlinux.o, but I'm also fine with skipping noinstr validation with LTO.
> 
> Right, then we need to make --no-vmlinux work properly when
> !DEBUG_ENTRY, which I think might be buggered due to us overriding the
> argument when the objname ends with "vmlinux.o".

Right. Can we just remove that and  pass --vmlinux to objtool in
link-vmlinux.sh, or is the override necessary somewhere else?

> > > > +ifdef CONFIG_STACK_VALIDATION
> > > > +ifneq ($(SKIP_STACK_VALIDATION),1)
> > > > +cmd_ld_ko_o +=								\
> > > > +	$(objtree)/tools/objtool/objtool				\
> > > > +		$(if $(CONFIG_UNWINDER_ORC),orc generate,check)		\
> > > > +		--module						\
> > > > +		$(if $(CONFIG_FRAME_POINTER),,--no-fp)			\
> > > > +		$(if $(CONFIG_GCOV_KERNEL),--no-unreachable,)		\
> > > > +		$(if $(CONFIG_RETPOLINE),--retpoline,)			\
> > > > +		$(if $(CONFIG_X86_SMAP),--uaccess,)			\
> > > > +		$(@:.ko=$(prelink-ext).o);
> > > > +
> > > > +endif # SKIP_STACK_VALIDATION
> > > > +endif # CONFIG_STACK_VALIDATION
> > > 
> > > What about the objtool invocation from link-vmlinux.sh ?
> > 
> > What about it? The existing objtool_link invocation in link-vmlinux.sh
> > works fine for our purposes as well.
> 
> Well, I was wondering why you're adding yet another objtool invocation
> while we already have one.

Because we can't run objtool until we have compiled bitcode to native
code, so for modules, we're need another invocation after everything has
been compiled.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 05/22] kbuild: lto: postpone objtool
  2020-06-25 16:22         ` Sami Tolvanen
@ 2020-06-25 18:33           ` Peter Zijlstra
  2020-06-25 19:32             ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-25 18:33 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Thu, Jun 25, 2020 at 09:22:26AM -0700, Sami Tolvanen wrote:
> On Thu, Jun 25, 2020 at 09:47:16AM +0200, Peter Zijlstra wrote:

> > Right, then we need to make --no-vmlinux work properly when
> > !DEBUG_ENTRY, which I think might be buggered due to us overriding the
> > argument when the objname ends with "vmlinux.o".
> 
> Right. Can we just remove that and  pass --vmlinux to objtool in
> link-vmlinux.sh, or is the override necessary somewhere else?

Think we can remove it; it was just convenient when running manually.

> > > > > +ifdef CONFIG_STACK_VALIDATION
> > > > > +ifneq ($(SKIP_STACK_VALIDATION),1)
> > > > > +cmd_ld_ko_o +=								\
> > > > > +	$(objtree)/tools/objtool/objtool				\
> > > > > +		$(if $(CONFIG_UNWINDER_ORC),orc generate,check)		\
> > > > > +		--module						\
> > > > > +		$(if $(CONFIG_FRAME_POINTER),,--no-fp)			\
> > > > > +		$(if $(CONFIG_GCOV_KERNEL),--no-unreachable,)		\
> > > > > +		$(if $(CONFIG_RETPOLINE),--retpoline,)			\
> > > > > +		$(if $(CONFIG_X86_SMAP),--uaccess,)			\
> > > > > +		$(@:.ko=$(prelink-ext).o);
> > > > > +
> > > > > +endif # SKIP_STACK_VALIDATION
> > > > > +endif # CONFIG_STACK_VALIDATION
> > > > 
> > > > What about the objtool invocation from link-vmlinux.sh ?
> > > 
> > > What about it? The existing objtool_link invocation in link-vmlinux.sh
> > > works fine for our purposes as well.
> > 
> > Well, I was wondering why you're adding yet another objtool invocation
> > while we already have one.
> 
> Because we can't run objtool until we have compiled bitcode to native
> code, so for modules, we're need another invocation after everything has
> been compiled.

Well, that I understand, my question was why we need one in
scripts/link-vmlinux.sh and an additional one. I think we're just
talking past one another and agree we only need one.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 05/22] kbuild: lto: postpone objtool
  2020-06-25 18:33           ` Peter Zijlstra
@ 2020-06-25 19:32             ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-25 19:32 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

On Thu, Jun 25, 2020 at 08:33:51PM +0200, Peter Zijlstra wrote:
> On Thu, Jun 25, 2020 at 09:22:26AM -0700, Sami Tolvanen wrote:
> > On Thu, Jun 25, 2020 at 09:47:16AM +0200, Peter Zijlstra wrote:
> 
> > > Right, then we need to make --no-vmlinux work properly when
> > > !DEBUG_ENTRY, which I think might be buggered due to us overriding the
> > > argument when the objname ends with "vmlinux.o".
> > 
> > Right. Can we just remove that and  pass --vmlinux to objtool in
> > link-vmlinux.sh, or is the override necessary somewhere else?
> 
> Think we can remove it; it was just convenient when running manually.

Great, I'll change this in v2.

> > > > > > +ifdef CONFIG_STACK_VALIDATION
> > > > > > +ifneq ($(SKIP_STACK_VALIDATION),1)
> > > > > > +cmd_ld_ko_o +=								\
> > > > > > +	$(objtree)/tools/objtool/objtool				\
> > > > > > +		$(if $(CONFIG_UNWINDER_ORC),orc generate,check)		\
> > > > > > +		--module						\
> > > > > > +		$(if $(CONFIG_FRAME_POINTER),,--no-fp)			\
> > > > > > +		$(if $(CONFIG_GCOV_KERNEL),--no-unreachable,)		\
> > > > > > +		$(if $(CONFIG_RETPOLINE),--retpoline,)			\
> > > > > > +		$(if $(CONFIG_X86_SMAP),--uaccess,)			\
> > > > > > +		$(@:.ko=$(prelink-ext).o);
> > > > > > +
> > > > > > +endif # SKIP_STACK_VALIDATION
> > > > > > +endif # CONFIG_STACK_VALIDATION
> > > > > 
> > > > > What about the objtool invocation from link-vmlinux.sh ?
> > > > 
> > > > What about it? The existing objtool_link invocation in link-vmlinux.sh
> > > > works fine for our purposes as well.
> > > 
> > > Well, I was wondering why you're adding yet another objtool invocation
> > > while we already have one.
> > 
> > Because we can't run objtool until we have compiled bitcode to native
> > code, so for modules, we're need another invocation after everything has
> > been compiled.
> 
> Well, that I understand, my question was why we need one in
> scripts/link-vmlinux.sh and an additional one. I think we're just
> talking past one another and agree we only need one.

We need just one for vmlinux.o, but this rule adds an objtool invocation
for kernel modules, which we also couldn't check earlier. We link all
the bitcode for modules into <module>.lto.o and run modpost and objtool
on that before building the final .ko.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-06-25 16:15         ` Sami Tolvanen
@ 2020-06-25 20:02           ` Peter Zijlstra
  2020-06-25 20:54             ` Nick Desaulniers
  2020-06-25 22:40             ` Sami Tolvanen
  0 siblings, 2 replies; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-25 20:02 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Steven Rostedt, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf, mhelsley

On Thu, Jun 25, 2020 at 09:15:03AM -0700, Sami Tolvanen wrote:
> On Thu, Jun 25, 2020 at 09:45:30AM +0200, Peter Zijlstra wrote:

> > At least for x86_64 I can do a really quick take for a recordmcount pass
> > in objtool, but I suppose you also need this for ARM64 ?
> 
> Sure, sounds good. arm64 uses -fpatchable-function-entry with clang, so we
> don't need recordmcount there.

This is on top of my local pile:

  git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue.git master

which notably includes the static_call series.

Not boot tested, but it generates the required sections and they look
more or less as expected, ymmv.

---
 arch/x86/Kconfig              |  1 -
 scripts/Makefile.build        |  3 ++
 scripts/link-vmlinux.sh       |  2 +-
 tools/objtool/builtin-check.c |  9 ++---
 tools/objtool/builtin.h       |  2 +-
 tools/objtool/check.c         | 81 +++++++++++++++++++++++++++++++++++++++++++
 tools/objtool/check.h         |  1 +
 tools/objtool/objtool.h       |  1 +
 8 files changed, 91 insertions(+), 9 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a291823f3f26..189575c12434 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -174,7 +174,6 @@ config X86
 	select HAVE_EXIT_THREAD
 	select HAVE_FAST_GUP
 	select HAVE_FENTRY			if X86_64 || DYNAMIC_FTRACE
-	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select HAVE_GCC_PLUGINS
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 2e8810b7e5ed..c774befc57da 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -227,6 +227,9 @@ endif
 ifdef CONFIG_X86_SMAP
   objtool_args += --uaccess
 endif
+ifdef CONFIG_DYNAMIC_FTRACE
+  objtool_args += --mcount
+endif
 
 # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 92dd745906f4..00c6e4f28a1a 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -60,7 +60,7 @@ objtool_link()
 	local objtoolopt;
 
 	if [ -n "${CONFIG_VMLINUX_VALIDATION}" ]; then
-		objtoolopt="check"
+		objtoolopt="check --vmlinux"
 		if [ -z "${CONFIG_FRAME_POINTER}" ]; then
 			objtoolopt="${objtoolopt} --no-fp"
 		fi
diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c
index 4896c5a89702..a6c3a3fba67d 100644
--- a/tools/objtool/builtin-check.c
+++ b/tools/objtool/builtin-check.c
@@ -18,7 +18,7 @@
 #include "builtin.h"
 #include "objtool.h"
 
-bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, fpu;
+bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, fpu, mcount;
 
 static const char * const check_usage[] = {
 	"objtool check [<options>] file.o",
@@ -36,12 +36,13 @@ const struct option check_options[] = {
 	OPT_BOOLEAN('d', "duplicate", &validate_dup, "duplicate validation for vmlinux.o"),
 	OPT_BOOLEAN('l', "vmlinux", &vmlinux, "vmlinux.o validation"),
 	OPT_BOOLEAN('F', "fpu", &fpu, "validate FPU context"),
+	OPT_BOOLEAN('M', "mcount", &mcount, "generate __mcount_loc"),
 	OPT_END(),
 };
 
 int cmd_check(int argc, const char **argv)
 {
-	const char *objname, *s;
+	const char *objname;
 
 	argc = parse_options(argc, argv, check_options, check_usage, 0);
 
@@ -50,9 +51,5 @@ int cmd_check(int argc, const char **argv)
 
 	objname = argv[0];
 
-	s = strstr(objname, "vmlinux.o");
-	if (s && !s[9])
-		vmlinux = true;
-
 	return check(objname, false);
 }
diff --git a/tools/objtool/builtin.h b/tools/objtool/builtin.h
index 7158e09d4cc9..b51d883ec245 100644
--- a/tools/objtool/builtin.h
+++ b/tools/objtool/builtin.h
@@ -8,7 +8,7 @@
 #include <subcmd/parse-options.h>
 
 extern const struct option check_options[];
-extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, fpu;
+extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, fpu, mcount;
 
 extern int cmd_check(int argc, const char **argv);
 extern int cmd_orc(int argc, const char **argv);
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 6647a8d1545b..ee99566bdae9 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -533,6 +533,65 @@ static int create_static_call_sections(struct objtool_file *file)
 	return 0;
 }
 
+static int create_mcount_loc_sections(struct objtool_file *file)
+{
+	struct section *sec, *reloc_sec;
+	struct reloc *reloc;
+	unsigned long *loc;
+	struct instruction *insn;
+	int idx;
+
+	sec = find_section_by_name(file->elf, "__mcount_loc");
+	if (sec) {
+		INIT_LIST_HEAD(&file->mcount_loc_list);
+		WARN("file already has __mcount_loc section, skipping");
+		return 0;
+	}
+
+	if (list_empty(&file->mcount_loc_list))
+		return 0;
+
+	idx = 0;
+	list_for_each_entry(insn, &file->mcount_loc_list, mcount_loc_node)
+		idx++;
+
+	sec = elf_create_section(file->elf, "__mcount_loc", 0, sizeof(unsigned long), idx);
+	if (!sec)
+		return -1;
+
+	reloc_sec = elf_create_reloc_section(file->elf, sec, SHT_RELA);
+	if (!reloc_sec)
+		return -1;
+
+	idx = 0;
+	list_for_each_entry(insn, &file->mcount_loc_list, mcount_loc_node) {
+
+		loc = (unsigned long *)sec->data->d_buf + idx;
+		memset(loc, 0, sizeof(unsigned long));
+
+		reloc = malloc(sizeof(*reloc));
+		if (!reloc) {
+			perror("malloc");
+			return -1;
+		}
+		memset(reloc, 0, sizeof(*reloc));
+
+		reloc->sym = insn->sec->sym;
+		reloc->addend = insn->offset;
+		reloc->type = R_X86_64_64;
+		reloc->offset = idx * sizeof(unsigned long);
+		reloc->sec = reloc_sec;
+		elf_add_reloc(file->elf, reloc);
+
+		idx++;
+	}
+
+	if (elf_rebuild_reloc_section(file->elf, reloc_sec))
+		return -1;
+
+	return 0;
+}
+
 /*
  * Warnings shouldn't be reported for ignored functions.
  */
@@ -892,6 +951,22 @@ static int add_call_destinations(struct objtool_file *file)
 			insn->type = INSN_NOP;
 		}
 
+		if (mcount && !strcmp(insn->call_dest->name, "__fentry__")) {
+			if (reloc) {
+				reloc->type = R_NONE;
+				elf_write_reloc(file->elf, reloc);
+			}
+
+			elf_write_insn(file->elf, insn->sec,
+				       insn->offset, insn->len,
+				       arch_nop_insn(insn->len));
+
+			insn->type = INSN_NOP;
+
+			list_add_tail(&insn->mcount_loc_node,
+				      &file->mcount_loc_list);
+		}
+
 		/*
 		 * Whatever stack impact regular CALLs have, should be undone
 		 * by the RETURN of the called function.
@@ -3004,6 +3079,7 @@ int check(const char *_objname, bool orc)
 	INIT_LIST_HEAD(&file.insn_list);
 	hash_init(file.insn_hash);
 	INIT_LIST_HEAD(&file.static_call_list);
+	INIT_LIST_HEAD(&file.mcount_loc_list);
 	file.c_file = !vmlinux && find_section_by_name(file.elf, ".comment");
 	file.ignore_unreachables = no_unreachable;
 	file.hints = false;
@@ -3056,6 +3132,11 @@ int check(const char *_objname, bool orc)
 		goto out;
 	warnings += ret;
 
+	ret = create_mcount_loc_sections(&file);
+	if (ret < 0)
+		goto out;
+	warnings += ret;
+
 	if (orc) {
 		ret = create_orc(&file);
 		if (ret < 0)
diff --git a/tools/objtool/check.h b/tools/objtool/check.h
index cd95fca0d237..01f11b5da5dd 100644
--- a/tools/objtool/check.h
+++ b/tools/objtool/check.h
@@ -24,6 +24,7 @@ struct instruction {
 	struct list_head list;
 	struct hlist_node hash;
 	struct list_head static_call_node;
+	struct list_head mcount_loc_node;
 	struct section *sec;
 	unsigned long offset;
 	unsigned int len;
diff --git a/tools/objtool/objtool.h b/tools/objtool/objtool.h
index 9a7cd0b88bd8..f604b22d22cc 100644
--- a/tools/objtool/objtool.h
+++ b/tools/objtool/objtool.h
@@ -17,6 +17,7 @@ struct objtool_file {
 	struct list_head insn_list;
 	DECLARE_HASHTABLE(insn_hash, 20);
 	struct list_head static_call_list;
+	struct list_head mcount_loc_list;
 	bool ignore_unreachables, c_file, hints, rodata;
 };
 

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-06-25 20:02           ` [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool Peter Zijlstra
@ 2020-06-25 20:54             ` Nick Desaulniers
  2020-06-25 22:40             ` Sami Tolvanen
  1 sibling, 0 replies; 213+ messages in thread
From: Nick Desaulniers @ 2020-06-25 20:54 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Sami Tolvanen, Steven Rostedt, Masahiro Yamada, Will Deacon,
	Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	clang-built-linux, Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT),
	Josh Poimboeuf, mhelsley

On Thu, Jun 25, 2020 at 1:02 PM Peter Zijlstra <peterz@infradead.org> wrote:
>
> On Thu, Jun 25, 2020 at 09:15:03AM -0700, Sami Tolvanen wrote:
> > On Thu, Jun 25, 2020 at 09:45:30AM +0200, Peter Zijlstra wrote:
>
> > > At least for x86_64 I can do a really quick take for a recordmcount pass
> > > in objtool, but I suppose you also need this for ARM64 ?
> >
> > Sure, sounds good. arm64 uses -fpatchable-function-entry with clang, so we
> > don't need recordmcount there.
>
> This is on top of my local pile:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue.git master
>
> which notably includes the static_call series.
>
> Not boot tested, but it generates the required sections and they look
> more or less as expected, ymmv.
>
> ---
>  arch/x86/Kconfig              |  1 -
>  scripts/Makefile.build        |  3 ++
>  scripts/link-vmlinux.sh       |  2 +-
>  tools/objtool/builtin-check.c |  9 ++---
>  tools/objtool/builtin.h       |  2 +-
>  tools/objtool/check.c         | 81 +++++++++++++++++++++++++++++++++++++++++++
>  tools/objtool/check.h         |  1 +
>  tools/objtool/objtool.h       |  1 +
>  8 files changed, 91 insertions(+), 9 deletions(-)
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index a291823f3f26..189575c12434 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -174,7 +174,6 @@ config X86
>         select HAVE_EXIT_THREAD
>         select HAVE_FAST_GUP
>         select HAVE_FENTRY                      if X86_64 || DYNAMIC_FTRACE
> -       select HAVE_FTRACE_MCOUNT_RECORD
>         select HAVE_FUNCTION_GRAPH_TRACER
>         select HAVE_FUNCTION_TRACER
>         select HAVE_GCC_PLUGINS
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index 2e8810b7e5ed..c774befc57da 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -227,6 +227,9 @@ endif
>  ifdef CONFIG_X86_SMAP
>    objtool_args += --uaccess
>  endif
> +ifdef CONFIG_DYNAMIC_FTRACE
> +  objtool_args += --mcount
> +endif
>
>  # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
>  # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index 92dd745906f4..00c6e4f28a1a 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -60,7 +60,7 @@ objtool_link()
>         local objtoolopt;
>
>         if [ -n "${CONFIG_VMLINUX_VALIDATION}" ]; then
> -               objtoolopt="check"
> +               objtoolopt="check --vmlinux"
>                 if [ -z "${CONFIG_FRAME_POINTER}" ]; then
>                         objtoolopt="${objtoolopt} --no-fp"
>                 fi
> diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c
> index 4896c5a89702..a6c3a3fba67d 100644
> --- a/tools/objtool/builtin-check.c
> +++ b/tools/objtool/builtin-check.c
> @@ -18,7 +18,7 @@
>  #include "builtin.h"
>  #include "objtool.h"
>
> -bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, fpu;
> +bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, fpu, mcount;
>
>  static const char * const check_usage[] = {
>         "objtool check [<options>] file.o",
> @@ -36,12 +36,13 @@ const struct option check_options[] = {
>         OPT_BOOLEAN('d', "duplicate", &validate_dup, "duplicate validation for vmlinux.o"),
>         OPT_BOOLEAN('l', "vmlinux", &vmlinux, "vmlinux.o validation"),
>         OPT_BOOLEAN('F', "fpu", &fpu, "validate FPU context"),
> +       OPT_BOOLEAN('M', "mcount", &mcount, "generate __mcount_loc"),
>         OPT_END(),
>  };
>
>  int cmd_check(int argc, const char **argv)
>  {
> -       const char *objname, *s;
> +       const char *objname;
>
>         argc = parse_options(argc, argv, check_options, check_usage, 0);
>
> @@ -50,9 +51,5 @@ int cmd_check(int argc, const char **argv)
>
>         objname = argv[0];
>
> -       s = strstr(objname, "vmlinux.o");
> -       if (s && !s[9])
> -               vmlinux = true;
> -
>         return check(objname, false);
>  }
> diff --git a/tools/objtool/builtin.h b/tools/objtool/builtin.h
> index 7158e09d4cc9..b51d883ec245 100644
> --- a/tools/objtool/builtin.h
> +++ b/tools/objtool/builtin.h
> @@ -8,7 +8,7 @@
>  #include <subcmd/parse-options.h>
>
>  extern const struct option check_options[];
> -extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, fpu;
> +extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, fpu, mcount;
>
>  extern int cmd_check(int argc, const char **argv);
>  extern int cmd_orc(int argc, const char **argv);
> diff --git a/tools/objtool/check.c b/tools/objtool/check.c
> index 6647a8d1545b..ee99566bdae9 100644
> --- a/tools/objtool/check.c
> +++ b/tools/objtool/check.c
> @@ -533,6 +533,65 @@ static int create_static_call_sections(struct objtool_file *file)
>         return 0;
>  }
>
> +static int create_mcount_loc_sections(struct objtool_file *file)
> +{
> +       struct section *sec, *reloc_sec;
> +       struct reloc *reloc;
> +       unsigned long *loc;
> +       struct instruction *insn;
> +       int idx;
> +
> +       sec = find_section_by_name(file->elf, "__mcount_loc");
> +       if (sec) {
> +               INIT_LIST_HEAD(&file->mcount_loc_list);
> +               WARN("file already has __mcount_loc section, skipping");
> +               return 0;
> +       }
> +
> +       if (list_empty(&file->mcount_loc_list))
> +               return 0;
> +
> +       idx = 0;
> +       list_for_each_entry(insn, &file->mcount_loc_list, mcount_loc_node)
> +               idx++;
> +
> +       sec = elf_create_section(file->elf, "__mcount_loc", 0, sizeof(unsigned long), idx);
> +       if (!sec)
> +               return -1;
> +
> +       reloc_sec = elf_create_reloc_section(file->elf, sec, SHT_RELA);
> +       if (!reloc_sec)
> +               return -1;
> +
> +       idx = 0;
> +       list_for_each_entry(insn, &file->mcount_loc_list, mcount_loc_node) {
> +
> +               loc = (unsigned long *)sec->data->d_buf + idx;
> +               memset(loc, 0, sizeof(unsigned long));
> +
> +               reloc = malloc(sizeof(*reloc));
> +               if (!reloc) {
> +                       perror("malloc");
> +                       return -1;
> +               }
> +               memset(reloc, 0, sizeof(*reloc));

calloc(1, sizeof(*reloc))?

> +
> +               reloc->sym = insn->sec->sym;
> +               reloc->addend = insn->offset;
> +               reloc->type = R_X86_64_64;
> +               reloc->offset = idx * sizeof(unsigned long);
> +               reloc->sec = reloc_sec;
> +               elf_add_reloc(file->elf, reloc);
> +
> +               idx++;
> +       }
> +
> +       if (elf_rebuild_reloc_section(file->elf, reloc_sec))
> +               return -1;
> +
> +       return 0;
> +}
> +
>  /*
>   * Warnings shouldn't be reported for ignored functions.
>   */
> @@ -892,6 +951,22 @@ static int add_call_destinations(struct objtool_file *file)
>                         insn->type = INSN_NOP;
>                 }
>
> +               if (mcount && !strcmp(insn->call_dest->name, "__fentry__")) {
> +                       if (reloc) {
> +                               reloc->type = R_NONE;
> +                               elf_write_reloc(file->elf, reloc);
> +                       }
> +
> +                       elf_write_insn(file->elf, insn->sec,
> +                                      insn->offset, insn->len,
> +                                      arch_nop_insn(insn->len));
> +
> +                       insn->type = INSN_NOP;
> +
> +                       list_add_tail(&insn->mcount_loc_node,
> +                                     &file->mcount_loc_list);
> +               }
> +
>                 /*
>                  * Whatever stack impact regular CALLs have, should be undone
>                  * by the RETURN of the called function.
> @@ -3004,6 +3079,7 @@ int check(const char *_objname, bool orc)
>         INIT_LIST_HEAD(&file.insn_list);
>         hash_init(file.insn_hash);
>         INIT_LIST_HEAD(&file.static_call_list);
> +       INIT_LIST_HEAD(&file.mcount_loc_list);
>         file.c_file = !vmlinux && find_section_by_name(file.elf, ".comment");
>         file.ignore_unreachables = no_unreachable;
>         file.hints = false;
> @@ -3056,6 +3132,11 @@ int check(const char *_objname, bool orc)
>                 goto out;
>         warnings += ret;
>
> +       ret = create_mcount_loc_sections(&file);
> +       if (ret < 0)
> +               goto out;
> +       warnings += ret;
> +
>         if (orc) {
>                 ret = create_orc(&file);
>                 if (ret < 0)
> diff --git a/tools/objtool/check.h b/tools/objtool/check.h
> index cd95fca0d237..01f11b5da5dd 100644
> --- a/tools/objtool/check.h
> +++ b/tools/objtool/check.h
> @@ -24,6 +24,7 @@ struct instruction {
>         struct list_head list;
>         struct hlist_node hash;
>         struct list_head static_call_node;
> +       struct list_head mcount_loc_node;
>         struct section *sec;
>         unsigned long offset;
>         unsigned int len;
> diff --git a/tools/objtool/objtool.h b/tools/objtool/objtool.h
> index 9a7cd0b88bd8..f604b22d22cc 100644
> --- a/tools/objtool/objtool.h
> +++ b/tools/objtool/objtool.h
> @@ -17,6 +17,7 @@ struct objtool_file {
>         struct list_head insn_list;
>         DECLARE_HASHTABLE(insn_hash, 20);
>         struct list_head static_call_list;
> +       struct list_head mcount_loc_list;
>         bool ignore_unreachables, c_file, hints, rodata;
>  };
>


-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-06-25 20:02           ` [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool Peter Zijlstra
  2020-06-25 20:54             ` Nick Desaulniers
@ 2020-06-25 22:40             ` Sami Tolvanen
  2020-06-26 11:29               ` Peter Zijlstra
  1 sibling, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-25 22:40 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Steven Rostedt, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf, mhelsley

On Thu, Jun 25, 2020 at 10:02:35PM +0200, Peter Zijlstra wrote:
> On Thu, Jun 25, 2020 at 09:15:03AM -0700, Sami Tolvanen wrote:
> > On Thu, Jun 25, 2020 at 09:45:30AM +0200, Peter Zijlstra wrote:
> 
> > > At least for x86_64 I can do a really quick take for a recordmcount pass
> > > in objtool, but I suppose you also need this for ARM64 ?
> > 
> > Sure, sounds good. arm64 uses -fpatchable-function-entry with clang, so we
> > don't need recordmcount there.
> 
> This is on top of my local pile:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue.git master
> 
> which notably includes the static_call series.
> 
> Not boot tested, but it generates the required sections and they look
> more or less as expected, ymmv.
> 
> ---
>  arch/x86/Kconfig              |  1 -
>  scripts/Makefile.build        |  3 ++
>  scripts/link-vmlinux.sh       |  2 +-
>  tools/objtool/builtin-check.c |  9 ++---
>  tools/objtool/builtin.h       |  2 +-
>  tools/objtool/check.c         | 81 +++++++++++++++++++++++++++++++++++++++++++
>  tools/objtool/check.h         |  1 +
>  tools/objtool/objtool.h       |  1 +
>  8 files changed, 91 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index a291823f3f26..189575c12434 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -174,7 +174,6 @@ config X86
>  	select HAVE_EXIT_THREAD
>  	select HAVE_FAST_GUP
>  	select HAVE_FENTRY			if X86_64 || DYNAMIC_FTRACE
> -	select HAVE_FTRACE_MCOUNT_RECORD
>  	select HAVE_FUNCTION_GRAPH_TRACER
>  	select HAVE_FUNCTION_TRACER
>  	select HAVE_GCC_PLUGINS

This breaks DYNAMIC_FTRACE according to kernel/trace/ftrace.c:

  #ifndef CONFIG_FTRACE_MCOUNT_RECORD
  # error Dynamic ftrace depends on MCOUNT_RECORD
  #endif

And the build errors after that seem to confirm this. It looks like we might
need another flag to skip recordmcount.

Anyway, since objtool is run before recordmcount, I just left this unchanged
for testing and ignored the recordmcount warnings about __mcount_loc already
existing. Something is a bit off still though, I see this at boot:

  ------------[ ftrace bug ]------------
  ftrace failed to modify
  [<ffffffff81000660>] __tracepoint_iter_initcall_level+0x0/0x40
   actual:   0f:1f:44:00:00
  Initializing ftrace call sites
  ftrace record flags: 0
   (0)
   expected tramp: ffffffff81056500
  ------------[ cut here ]------------

Otherwise, this looks pretty good.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-06-25 22:40             ` Sami Tolvanen
@ 2020-06-26 11:29               ` Peter Zijlstra
  2020-06-26 11:42                 ` Peter Zijlstra
                                   ` (2 more replies)
  0 siblings, 3 replies; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-26 11:29 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Steven Rostedt, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf, mhelsley

On Thu, Jun 25, 2020 at 03:40:42PM -0700, Sami Tolvanen wrote:

> > Not boot tested, but it generates the required sections and they look
> > more or less as expected, ymmv.

> > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> > index a291823f3f26..189575c12434 100644
> > --- a/arch/x86/Kconfig
> > +++ b/arch/x86/Kconfig
> > @@ -174,7 +174,6 @@ config X86
> >  	select HAVE_EXIT_THREAD
> >  	select HAVE_FAST_GUP
> >  	select HAVE_FENTRY			if X86_64 || DYNAMIC_FTRACE
> > -	select HAVE_FTRACE_MCOUNT_RECORD
> >  	select HAVE_FUNCTION_GRAPH_TRACER
> >  	select HAVE_FUNCTION_TRACER
> >  	select HAVE_GCC_PLUGINS
> 
> This breaks DYNAMIC_FTRACE according to kernel/trace/ftrace.c:
> 
>   #ifndef CONFIG_FTRACE_MCOUNT_RECORD
>   # error Dynamic ftrace depends on MCOUNT_RECORD
>   #endif
> 
> And the build errors after that seem to confirm this. It looks like we might
> need another flag to skip recordmcount.

Hurm, Steve, how you want to do that?

> Anyway, since objtool is run before recordmcount, I just left this unchanged
> for testing and ignored the recordmcount warnings about __mcount_loc already
> existing. Something is a bit off still though, I see this at boot:
> 
>   ------------[ ftrace bug ]------------
>   ftrace failed to modify
>   [<ffffffff81000660>] __tracepoint_iter_initcall_level+0x0/0x40
>    actual:   0f:1f:44:00:00
>   Initializing ftrace call sites
>   ftrace record flags: 0
>    (0)
>    expected tramp: ffffffff81056500
>   ------------[ cut here ]------------
> 
> Otherwise, this looks pretty good.

Ha! it is trying to convert the "CALL __fentry__" into a NOP and not
finding the CALL -- because objtool already made it a NOP...

Weird, I thought recordmcount would also write NOPs, it certainly has
code for that. I suppose we can use CC_USING_NOP_MCOUNT to avoid those,
but I'd rather Steve explain this before I wreck things further.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-06-26 11:29               ` Peter Zijlstra
@ 2020-06-26 11:42                 ` Peter Zijlstra
  2020-07-17 17:28                 ` Sami Tolvanen
  2020-07-22 17:55                 ` Steven Rostedt
  2 siblings, 0 replies; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-26 11:42 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Steven Rostedt, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf, mhelsley

On Fri, Jun 26, 2020 at 01:29:31PM +0200, Peter Zijlstra wrote:
> On Thu, Jun 25, 2020 at 03:40:42PM -0700, Sami Tolvanen wrote:

> > Anyway, since objtool is run before recordmcount, I just left this unchanged
> > for testing and ignored the recordmcount warnings about __mcount_loc already
> > existing. Something is a bit off still though, I see this at boot:
> > 
> >   ------------[ ftrace bug ]------------
> >   ftrace failed to modify
> >   [<ffffffff81000660>] __tracepoint_iter_initcall_level+0x0/0x40
> >    actual:   0f:1f:44:00:00
> >   Initializing ftrace call sites
> >   ftrace record flags: 0
> >    (0)
> >    expected tramp: ffffffff81056500
> >   ------------[ cut here ]------------
> > 
> > Otherwise, this looks pretty good.
> 
> Ha! it is trying to convert the "CALL __fentry__" into a NOP and not
> finding the CALL -- because objtool already made it a NOP...
> 
> Weird, I thought recordmcount would also write NOPs, it certainly has
> code for that. I suppose we can use CC_USING_NOP_MCOUNT to avoid those,
> but I'd rather Steve explain this before I wreck things further.

Something like so would ignore whatever text is there and rewrite it
with ideal_nop.

---
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index c84d28e90a58..98a6a93d7615 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -109,9 +109,11 @@ static int __ref
 ftrace_modify_code_direct(unsigned long ip, const char *old_code,
 			  const char *new_code)
 {
-	int ret = ftrace_verify_code(ip, old_code);
-	if (ret)
-		return ret;
+	if (old_code) {
+		int ret = ftrace_verify_code(ip, old_code);
+		if (ret)
+			return ret;
+	}
 
 	/* replace the text with the new text */
 	if (ftrace_poke_late)
@@ -124,9 +126,8 @@ ftrace_modify_code_direct(unsigned long ip, const char *old_code,
 int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned long ip = rec->ip;
-	const char *new, *old;
+	const char *new;
 
-	old = ftrace_call_replace(ip, addr);
 	new = ftrace_nop_replace();
 
 	/*
@@ -138,7 +139,7 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long ad
 	 * just modify the code directly.
 	 */
 	if (addr == MCOUNT_ADDR)
-		return ftrace_modify_code_direct(ip, old, new);
+		return ftrace_modify_code_direct(ip, NULL, new);
 
 	/*
 	 * x86 overrides ftrace_replace_code -- this function will never be used

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (22 preceding siblings ...)
  2020-06-24 21:15 ` [PATCH 00/22] add support for Clang LTO Peter Zijlstra
@ 2020-06-28 16:56 ` Masahiro Yamada
  2020-06-29 23:20   ` Sami Tolvanen
  2020-07-11 16:32 ` Paul Menzel
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
  25 siblings, 1 reply; 213+ messages in thread
From: Masahiro Yamada @ 2020-06-28 16:56 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Will Deacon, Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, Kernel Hardening,
	linux-arch, linux-arm-kernel, Linux Kbuild mailing list,
	Linux Kernel Mailing List, linux-pci, X86 ML

On Thu, Jun 25, 2020 at 5:32 AM 'Sami Tolvanen' via Clang Built Linux
<clang-built-linux@googlegroups.com> wrote:
>
> This patch series adds support for building x86_64 and arm64 kernels
> with Clang's Link Time Optimization (LTO).
>
> In addition to performance, the primary motivation for LTO is to allow
> Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> Pixel devices have shipped with LTO+CFI kernels since 2018.
>
> Most of the patches are build system changes for handling LLVM bitcode,
> which Clang produces with LTO instead of ELF object files, postponing
> ELF processing until a later stage, and ensuring initcall ordering.
>
> Note that first objtool patch in the series is already in linux-next,
> but as it's needed with LTO, I'm including it also here to make testing
> easier.


I put this series on a testing branch,
and 0-day bot started reporting some issues.

(but 0-day bot is quieter than I expected.
Perhaps, 0-day bot does not turn on LLVM=1 ?)



I also got an error for
ARCH=arm64 allyesconfig + CONFIG_LTO_CLANG=y



$ make ARCH=arm64 LLVM=1 LLVM_IAS=1
CROSS_COMPILE=~/tools/aarch64-linaro-7.5/bin/aarch64-linux-gnu-
-j24

  ...

  GEN     .version
  CHK     include/generated/compile.h
  UPD     include/generated/compile.h
  CC      init/version.o
  AR      init/built-in.a
  GEN     .tmp_initcalls.lds
  GEN     .tmp_symversions.lds
  LTO     vmlinux.o
  MODPOST vmlinux.symvers
  MODINFO modules.builtin.modinfo
  GEN     modules.builtin
  LD      .tmp_vmlinux.kallsyms1
ld.lld: error: undefined symbol: __compiletime_assert_905
>>> referenced by irqbypass.c
>>>               vmlinux.o:(jeq_imm)
make: *** [Makefile:1161: vmlinux] Error 1








> Sami Tolvanen (22):
>   objtool: use sh_info to find the base for .rela sections
>   kbuild: add support for Clang LTO
>   kbuild: lto: fix module versioning
>   kbuild: lto: fix recordmcount
>   kbuild: lto: postpone objtool
>   kbuild: lto: limit inlining
>   kbuild: lto: merge module sections
>   kbuild: lto: remove duplicate dependencies from .mod files
>   init: lto: ensure initcall ordering
>   init: lto: fix PREL32 relocations
>   pci: lto: fix PREL32 relocations
>   modpost: lto: strip .lto from module names
>   scripts/mod: disable LTO for empty.c
>   efi/libstub: disable LTO
>   drivers/misc/lkdtm: disable LTO for rodata.o
>   arm64: export CC_USING_PATCHABLE_FUNCTION_ENTRY
>   arm64: vdso: disable LTO
>   arm64: allow LTO_CLANG and THINLTO to be selected
>   x86, vdso: disable LTO only for vDSO
>   x86, ftrace: disable recordmcount for ftrace_make_nop
>   x86, relocs: Ignore L4_PAGE_OFFSET relocations
>   x86, build: allow LTO_CLANG and THINLTO to be selected
>
>  .gitignore                            |   1 +
>  Makefile                              |  27 ++-
>  arch/Kconfig                          |  65 +++++++
>  arch/arm64/Kconfig                    |   2 +
>  arch/arm64/Makefile                   |   1 +
>  arch/arm64/kernel/vdso/Makefile       |   4 +-
>  arch/x86/Kconfig                      |   2 +
>  arch/x86/Makefile                     |   5 +
>  arch/x86/entry/vdso/Makefile          |   5 +-
>  arch/x86/kernel/ftrace.c              |   1 +
>  arch/x86/tools/relocs.c               |   1 +
>  drivers/firmware/efi/libstub/Makefile |   2 +
>  drivers/misc/lkdtm/Makefile           |   1 +
>  include/asm-generic/vmlinux.lds.h     |  12 +-
>  include/linux/compiler-clang.h        |   4 +
>  include/linux/compiler.h              |   2 +-
>  include/linux/compiler_types.h        |   4 +
>  include/linux/init.h                  |  78 +++++++-
>  include/linux/pci.h                   |  15 +-
>  kernel/trace/ftrace.c                 |   1 +
>  lib/Kconfig.debug                     |   2 +-
>  scripts/Makefile.build                |  55 +++++-
>  scripts/Makefile.lib                  |   6 +-
>  scripts/Makefile.modfinal             |  40 +++-
>  scripts/Makefile.modpost              |  26 ++-
>  scripts/generate_initcall_order.pl    | 270 ++++++++++++++++++++++++++
>  scripts/link-vmlinux.sh               | 100 +++++++++-
>  scripts/mod/Makefile                  |   1 +
>  scripts/mod/modpost.c                 |  16 +-
>  scripts/mod/modpost.h                 |   9 +
>  scripts/mod/sumversion.c              |   6 +-
>  scripts/module-lto.lds                |  26 +++
>  scripts/recordmcount.c                |   3 +-
>  tools/objtool/elf.c                   |   2 +-
>  34 files changed, 737 insertions(+), 58 deletions(-)
>  create mode 100755 scripts/generate_initcall_order.pl
>  create mode 100644 scripts/module-lto.lds
>
>
> base-commit: 26e122e97a3d0390ebec389347f64f3730fdf48f
> --
> 2.27.0.212.ge8ba1cc988-goog
>
> --
> You received this message because you are subscribed to the Google Groups "Clang Built Linux" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to clang-built-linux+unsubscribe@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/clang-built-linux/20200624203200.78870-1-samitolvanen%40google.com.



--
Best Regards
Masahiro Yamada

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-28 16:56 ` Masahiro Yamada
@ 2020-06-29 23:20   ` Sami Tolvanen
  2020-07-07 15:51     ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-06-29 23:20 UTC (permalink / raw)
  To: Masahiro Yamada
  Cc: Will Deacon, Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, Kernel Hardening,
	linux-arch, linux-arm-kernel, Linux Kbuild mailing list,
	Linux Kernel Mailing List, linux-pci, X86 ML

Hi Masahiro,

On Mon, Jun 29, 2020 at 01:56:19AM +0900, Masahiro Yamada wrote:
> On Thu, Jun 25, 2020 at 5:32 AM 'Sami Tolvanen' via Clang Built Linux
> <clang-built-linux@googlegroups.com> wrote:
> >
> > This patch series adds support for building x86_64 and arm64 kernels
> > with Clang's Link Time Optimization (LTO).
> >
> > In addition to performance, the primary motivation for LTO is to allow
> > Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> > Pixel devices have shipped with LTO+CFI kernels since 2018.
> >
> > Most of the patches are build system changes for handling LLVM bitcode,
> > which Clang produces with LTO instead of ELF object files, postponing
> > ELF processing until a later stage, and ensuring initcall ordering.
> >
> > Note that first objtool patch in the series is already in linux-next,
> > but as it's needed with LTO, I'm including it also here to make testing
> > easier.
> 
> 
> I put this series on a testing branch,
> and 0-day bot started reporting some issues.

Yes, I'll fix those issues in v2.

> (but 0-day bot is quieter than I expected.
> Perhaps, 0-day bot does not turn on LLVM=1 ?)

In order for it to test an LTO build, it would need to enable LTO_CLANG
explicitly though, in addition to LLVM=1.

> I also got an error for
> ARCH=arm64 allyesconfig + CONFIG_LTO_CLANG=y
> 
> 
> 
> $ make ARCH=arm64 LLVM=1 LLVM_IAS=1
> CROSS_COMPILE=~/tools/aarch64-linaro-7.5/bin/aarch64-linux-gnu-
> -j24
> 
>   ...
> 
>   GEN     .version
>   CHK     include/generated/compile.h
>   UPD     include/generated/compile.h
>   CC      init/version.o
>   AR      init/built-in.a
>   GEN     .tmp_initcalls.lds
>   GEN     .tmp_symversions.lds
>   LTO     vmlinux.o
>   MODPOST vmlinux.symvers
>   MODINFO modules.builtin.modinfo
>   GEN     modules.builtin
>   LD      .tmp_vmlinux.kallsyms1
> ld.lld: error: undefined symbol: __compiletime_assert_905
> >>> referenced by irqbypass.c
> >>>               vmlinux.o:(jeq_imm)
> make: *** [Makefile:1161: vmlinux] Error 1

I can reproduce this with ToT LLVM and it's BUILD_BUG_ON_MSG(..., "value
too large for the field") in drivers/net/ethernet/netronome/nfp/bpf/jit.c.
Specifically, the FIELD_FIT / __BF_FIELD_CHECK macro in ur_load_imm_any.

This compiles just fine with an earlier LLVM revision, so it could be a
relatively recent regression. I'll take a look. Thanks for catching this!

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-25  8:57         ` Peter Zijlstra
@ 2020-06-30 19:19           ` Marco Elver
  2020-06-30 20:12             ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Marco Elver @ 2020-06-30 19:19 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Nick Desaulniers, Sami Tolvanen, Masahiro Yamada, Will Deacon,
	Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	clang-built-linux, Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

I was asked for input on this, and after a few days digging through some
history, thought I'd comment. Hope you don't mind.

On Thu, Jun 25, 2020 at 10:57AM +0200, Peter Zijlstra wrote:
> On Thu, Jun 25, 2020 at 10:24:33AM +0200, Peter Zijlstra wrote:
> > On Thu, Jun 25, 2020 at 10:03:13AM +0200, Peter Zijlstra wrote:
> > > I'm sure Will will respond, but the basic issue is the trainwreck C11
> > > made of dependent loads.
> > > 
> > > Anyway, here's a link to the last time this came up:
> > > 
> > >   https://lore.kernel.org/linux-arm-kernel/20171116174830.GX3624@linux.vnet.ibm.com/
> > 
> > Another good read:
> > 
> >   https://lore.kernel.org/lkml/20150520005510.GA23559@linux.vnet.ibm.com/
[...]
> Because now the machine can speculate and load now before seq, breaking
> the ordering.

First of all, I agree with the concerns, but not because of LTO.

To set the stage better, and summarize the fundamental problem again:
we're in the unfortunate situation that no compiler today has a way to
_efficiently_ deal with C11's memory_order_consume
[https://lwn.net/Articles/588300/]. If we did, we could just use that
and be done with it. But, sadly, that doesn't seem possible right now --
compilers just say consume==acquire. Will suggests doing the same in the
kernel: https://lkml.kernel.org/r/20200630173734.14057-19-will@kernel.org

What we're most worried about right now is the existence of compiler
transformations that could break data dependencies by e.g. turning them
into control dependencies.

If this is a real worry, I don't think LTO is the magical feature that
will uncover those optimizations. If these compiler transformations are
real, they also exist in a normal build! And if we are worried about
them, we need to stop relying on dependent load ordering across the
board; or switch to -O0 for everything. Clearly, we don't want either.

Why do we think LTO is special?

With LTO, Clang just emits LLVM bitcode instead of ELF objects, and
during the linker stage intermodular optimizations across translation
unit boundaries are done that might not be possible otherwise
[https://llvm.org/docs/LinkTimeOptimization.html]. From the memory model
side of things, if we could fully convey our intent to the compiler (the
imaginary consume), there would be no problem, because all optimization
stages from bitcode generation to the final machine code generation
after LTO know about the intended semantics. (Also, keep in mind that
LTO is _not_ doing post link optimization of machine code binaries!)

But as far as we can tell, there is no evidence of the dreaded "data
dependency to control dependency" conversion with LTO that isn't there
in non-LTO builds, if it's even there at all. Has the data to control
dependency conversion been encountered in the wild? If not, is the
resulting reaction an overreaction? If so, we need to be careful blaming
LTO for something that it isn't even guilty of.

So, we are probably better off untangling LTO from the story:

1. LTO or no LTO does not matter. The LTO series should not get tangled
   up with memory model issues.

2. The memory model question and problems need to be answered and
   addressed separately.

Thoughts?

Thanks,
-- Marco

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-30 19:19           ` Marco Elver
@ 2020-06-30 20:12             ` Peter Zijlstra
  2020-06-30 20:30               ` Paul E. McKenney
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-06-30 20:12 UTC (permalink / raw)
  To: Marco Elver
  Cc: Nick Desaulniers, Sami Tolvanen, Masahiro Yamada, Will Deacon,
	Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	clang-built-linux, Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Tue, Jun 30, 2020 at 09:19:31PM +0200, Marco Elver wrote:
> I was asked for input on this, and after a few days digging through some
> history, thought I'd comment. Hope you don't mind.

Not at all, being the one that asked :-)

> First of all, I agree with the concerns, but not because of LTO.
> 
> To set the stage better, and summarize the fundamental problem again:
> we're in the unfortunate situation that no compiler today has a way to
> _efficiently_ deal with C11's memory_order_consume
> [https://lwn.net/Articles/588300/]. If we did, we could just use that
> and be done with it. But, sadly, that doesn't seem possible right now --
> compilers just say consume==acquire.

I'm not convinced C11 memory_order_consume would actually work for us,
even if it would work. That is, given:

  https://lore.kernel.org/lkml/20150520005510.GA23559@linux.vnet.ibm.com/

only pointers can have consume, but like I pointed out, we have code
that relies on dependent loads from integers.

> Will suggests doing the same in the
> kernel: https://lkml.kernel.org/r/20200630173734.14057-19-will@kernel.org

PowerPC would need a similar thing, it too will not preserve causality
for control dependecies.

> What we're most worried about right now is the existence of compiler
> transformations that could break data dependencies by e.g. turning them
> into control dependencies.

Correct.

> If this is a real worry, I don't think LTO is the magical feature that
> will uncover those optimizations. If these compiler transformations are
> real, they also exist in a normal build! 

Agreed, _however_ with the caveat that LTO could make them more common.

After all, with whole program analysis, the compiler might be able to
more easily determine that our pointer @ptr is only ever assigned the
values of &A, &B or &C, while without that visibility it would not be
able to determine this.

Once it knows @ptr has a limited number of determined values, the
conversion into control dependencies becomes much more likely.

> And if we are worried about them, we need to stop relying on dependent
> load ordering across the board; or switch to -O0 for everything.
> Clearly, we don't want either.

Agreed.

> Why do we think LTO is special?

As argued above, whole-program analysis would make it more likely. But I
agree the fundamental problem exists independent from LTO.

> But as far as we can tell, there is no evidence of the dreaded "data
> dependency to control dependency" conversion with LTO that isn't there
> in non-LTO builds, if it's even there at all. Has the data to control
> dependency conversion been encountered in the wild? If not, is the
> resulting reaction an overreaction? If so, we need to be careful blaming
> LTO for something that it isn't even guilty of.

It is mostly paranoia; in a large part driven by the fact that even if
such a conversion were to be done, it could go a very long time without
actually causing problems, and longer still for such problems to be
traced back to such an 'optimization'.

That is, the collective hurt from debugging too many ordering issues.

> So, we are probably better off untangling LTO from the story:
> 
> 1. LTO or no LTO does not matter. The LTO series should not get tangled
>    up with memory model issues.
> 
> 2. The memory model question and problems need to be answered and
>    addressed separately.
> 
> Thoughts?

How hard would it be to creates something that analyzes a build and
looks for all 'dependent load -> control dependency' transformations
headed by a volatile (and/or from asm) load and issues a warning for
them?

This would give us an indication of how valuable this transformation is
for the kernel. I'm hoping/expecting it's vanishingly rare, but what do
I know.


^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-30 20:12             ` Peter Zijlstra
@ 2020-06-30 20:30               ` Paul E. McKenney
  2020-07-01  9:10                 ` Peter Zijlstra
  2020-07-01  9:41                 ` Marco Elver
  0 siblings, 2 replies; 213+ messages in thread
From: Paul E. McKenney @ 2020-06-30 20:30 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Tue, Jun 30, 2020 at 10:12:43PM +0200, Peter Zijlstra wrote:
> On Tue, Jun 30, 2020 at 09:19:31PM +0200, Marco Elver wrote:
> > I was asked for input on this, and after a few days digging through some
> > history, thought I'd comment. Hope you don't mind.
> 
> Not at all, being the one that asked :-)
> 
> > First of all, I agree with the concerns, but not because of LTO.
> > 
> > To set the stage better, and summarize the fundamental problem again:
> > we're in the unfortunate situation that no compiler today has a way to
> > _efficiently_ deal with C11's memory_order_consume
> > [https://lwn.net/Articles/588300/]. If we did, we could just use that
> > and be done with it. But, sadly, that doesn't seem possible right now --
> > compilers just say consume==acquire.
> 
> I'm not convinced C11 memory_order_consume would actually work for us,
> even if it would work. That is, given:
> 
>   https://lore.kernel.org/lkml/20150520005510.GA23559@linux.vnet.ibm.com/
> 
> only pointers can have consume, but like I pointed out, we have code
> that relies on dependent loads from integers.

I agree that C11 memory_order_consume is not normally what we want,
given that it is universally promoted to memory_order_acquire.

However, dependent loads from integers are, if anything, more difficult
to defend from the compiler than are control dependencies.  This applies
doubly to integers that are used to index two-element arrays, in which
case you are just asking the compiler to destroy your dependent loads
by converting them into control dependencies.

> > Will suggests doing the same in the
> > kernel: https://lkml.kernel.org/r/20200630173734.14057-19-will@kernel.org
> 
> PowerPC would need a similar thing, it too will not preserve causality
> for control dependecies.
> 
> > What we're most worried about right now is the existence of compiler
> > transformations that could break data dependencies by e.g. turning them
> > into control dependencies.
> 
> Correct.
> 
> > If this is a real worry, I don't think LTO is the magical feature that
> > will uncover those optimizations. If these compiler transformations are
> > real, they also exist in a normal build! 
> 
> Agreed, _however_ with the caveat that LTO could make them more common.
> 
> After all, with whole program analysis, the compiler might be able to
> more easily determine that our pointer @ptr is only ever assigned the
> values of &A, &B or &C, while without that visibility it would not be
> able to determine this.
> 
> Once it knows @ptr has a limited number of determined values, the
> conversion into control dependencies becomes much more likely.

Which would of course break dependent loads.

> > And if we are worried about them, we need to stop relying on dependent
> > load ordering across the board; or switch to -O0 for everything.
> > Clearly, we don't want either.
> 
> Agreed.
> 
> > Why do we think LTO is special?
> 
> As argued above, whole-program analysis would make it more likely. But I
> agree the fundamental problem exists independent from LTO.
> 
> > But as far as we can tell, there is no evidence of the dreaded "data
> > dependency to control dependency" conversion with LTO that isn't there
> > in non-LTO builds, if it's even there at all. Has the data to control
> > dependency conversion been encountered in the wild? If not, is the
> > resulting reaction an overreaction? If so, we need to be careful blaming
> > LTO for something that it isn't even guilty of.
> 
> It is mostly paranoia; in a large part driven by the fact that even if
> such a conversion were to be done, it could go a very long time without
> actually causing problems, and longer still for such problems to be
> traced back to such an 'optimization'.
> 
> That is, the collective hurt from debugging too many ordering issues.
> 
> > So, we are probably better off untangling LTO from the story:
> > 
> > 1. LTO or no LTO does not matter. The LTO series should not get tangled
> >    up with memory model issues.
> > 
> > 2. The memory model question and problems need to be answered and
> >    addressed separately.
> > 
> > Thoughts?
> 
> How hard would it be to creates something that analyzes a build and
> looks for all 'dependent load -> control dependency' transformations
> headed by a volatile (and/or from asm) load and issues a warning for
> them?
> 
> This would give us an indication of how valuable this transformation is
> for the kernel. I'm hoping/expecting it's vanishingly rare, but what do
> I know.
> 

This could be quite useful!

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-30 20:30               ` Paul E. McKenney
@ 2020-07-01  9:10                 ` Peter Zijlstra
  2020-07-01 14:20                   ` David Laight
  2020-07-01  9:41                 ` Marco Elver
  1 sibling, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-01  9:10 UTC (permalink / raw)
  To: Paul E. McKenney
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Tue, Jun 30, 2020 at 01:30:16PM -0700, Paul E. McKenney wrote:
> On Tue, Jun 30, 2020 at 10:12:43PM +0200, Peter Zijlstra wrote:

> > I'm not convinced C11 memory_order_consume would actually work for us,
> > even if it would work. That is, given:
> > 
> >   https://lore.kernel.org/lkml/20150520005510.GA23559@linux.vnet.ibm.com/
> > 
> > only pointers can have consume, but like I pointed out, we have code
> > that relies on dependent loads from integers.
> 
> I agree that C11 memory_order_consume is not normally what we want,
> given that it is universally promoted to memory_order_acquire.
> 
> However, dependent loads from integers are, if anything, more difficult
> to defend from the compiler than are control dependencies.  This applies
> doubly to integers that are used to index two-element arrays, in which
> case you are just asking the compiler to destroy your dependent loads
> by converting them into control dependencies.

Yes, I'm aware. However, as you might know, I'm firmly in the 'C is a
glorified assembler' camp (as I expect most actual OS people are, out of
necessity if nothing else) and if I wanted a control dependency I
would've bloody well written one.

I think an optimizing compiler is awesome, but only in so far as that
optimization is actually helpful -- and yes, I just stepped into a giant
twilight zone there. That is, any optimization that has _any_
controversy should be controllable (like -fno-strict-overflow
-fno-strict-aliasing) and I'd very much like the same here.

In a larger context, I still think that eliminating speculative stores
is both necessary and sufficient to avoid out-of-thin-air. So I'd also
love to get some control on that.


^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-30 20:30               ` Paul E. McKenney
  2020-07-01  9:10                 ` Peter Zijlstra
@ 2020-07-01  9:41                 ` Marco Elver
  2020-07-01 10:03                   ` Will Deacon
  2020-07-01 11:40                   ` Peter Zijlstra
  1 sibling, 2 replies; 213+ messages in thread
From: Marco Elver @ 2020-07-01  9:41 UTC (permalink / raw)
  To: Paul E. McKenney, Peter Zijlstra
  Cc: Nick Desaulniers, Sami Tolvanen, Masahiro Yamada, Will Deacon,
	Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Tue, 30 Jun 2020 at 22:30, Paul E. McKenney <paulmck@kernel.org> wrote:
> On Tue, Jun 30, 2020 at 10:12:43PM +0200, Peter Zijlstra wrote:
> > On Tue, Jun 30, 2020 at 09:19:31PM +0200, Marco Elver wrote:

> > > First of all, I agree with the concerns, but not because of LTO.
> > >
> > > To set the stage better, and summarize the fundamental problem again:
> > > we're in the unfortunate situation that no compiler today has a way to
> > > _efficiently_ deal with C11's memory_order_consume
> > > [https://lwn.net/Articles/588300/]. If we did, we could just use that
> > > and be done with it. But, sadly, that doesn't seem possible right now --
> > > compilers just say consume==acquire.
> >
> > I'm not convinced C11 memory_order_consume would actually work for us,
> > even if it would work. That is, given:
> >
> >   https://lore.kernel.org/lkml/20150520005510.GA23559@linux.vnet.ibm.com/
> >
> > only pointers can have consume, but like I pointed out, we have code
> > that relies on dependent loads from integers.
>
> I agree that C11 memory_order_consume is not normally what we want,
> given that it is universally promoted to memory_order_acquire.
>
> However, dependent loads from integers are, if anything, more difficult
> to defend from the compiler than are control dependencies.  This applies
> doubly to integers that are used to index two-element arrays, in which
> case you are just asking the compiler to destroy your dependent loads
> by converting them into control dependencies.
>
> > > Will suggests doing the same in the
> > > kernel: https://lkml.kernel.org/r/20200630173734.14057-19-will@kernel.org
> >
> > PowerPC would need a similar thing, it too will not preserve causality
> > for control dependecies.
> >
> > > What we're most worried about right now is the existence of compiler
> > > transformations that could break data dependencies by e.g. turning them
> > > into control dependencies.
> >
> > Correct.
> >
> > > If this is a real worry, I don't think LTO is the magical feature that
> > > will uncover those optimizations. If these compiler transformations are
> > > real, they also exist in a normal build!
> >
> > Agreed, _however_ with the caveat that LTO could make them more common.
> >
> > After all, with whole program analysis, the compiler might be able to
> > more easily determine that our pointer @ptr is only ever assigned the
> > values of &A, &B or &C, while without that visibility it would not be
> > able to determine this.
> >
> > Once it knows @ptr has a limited number of determined values, the
> > conversion into control dependencies becomes much more likely.
>
> Which would of course break dependent loads.
>
> > > And if we are worried about them, we need to stop relying on dependent
> > > load ordering across the board; or switch to -O0 for everything.
> > > Clearly, we don't want either.
> >
> > Agreed.
> >
> > > Why do we think LTO is special?
> >
> > As argued above, whole-program analysis would make it more likely. But I
> > agree the fundamental problem exists independent from LTO.
> >
> > > But as far as we can tell, there is no evidence of the dreaded "data
> > > dependency to control dependency" conversion with LTO that isn't there
> > > in non-LTO builds, if it's even there at all. Has the data to control
> > > dependency conversion been encountered in the wild? If not, is the
> > > resulting reaction an overreaction? If so, we need to be careful blaming
> > > LTO for something that it isn't even guilty of.
> >
> > It is mostly paranoia; in a large part driven by the fact that even if
> > such a conversion were to be done, it could go a very long time without
> > actually causing problems, and longer still for such problems to be
> > traced back to such an 'optimization'.
> >
> > That is, the collective hurt from debugging too many ordering issues.
> >
> > > So, we are probably better off untangling LTO from the story:
> > >
> > > 1. LTO or no LTO does not matter. The LTO series should not get tangled
> > >    up with memory model issues.
> > >
> > > 2. The memory model question and problems need to be answered and
> > >    addressed separately.
> > >
> > > Thoughts?
> >
> > How hard would it be to creates something that analyzes a build and
> > looks for all 'dependent load -> control dependency' transformations
> > headed by a volatile (and/or from asm) load and issues a warning for
> > them?

I was thinking about this, but in the context of the "auto-promote to
acquire" which you didn't like. Issuing a warning should certainly be
simpler.

I think there is no one place where we know these transformations
happen, but rather, need to analyze the IR before transformations,
take note of all the dependent loads headed by volatile+asm, and then
run an analysis after optimizations checking the dependencies are
still there.

> > This would give us an indication of how valuable this transformation is
> > for the kernel. I'm hoping/expecting it's vanishingly rare, but what do
> > I know.
>
> This could be quite useful!

We might then even be able to say, "if you get this warning, turn on
CONFIG_ACQUIRE_READ_DEPENDENCIES" (or however the option will be
named). Or some other tricks, like automatically recompile the TU
where this happens with the option. But again, this is not something
that should specifically block LTO, because if we have this, we'll
need to turn it on for everything.

Thanks,
-- Marco

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-01  9:41                 ` Marco Elver
@ 2020-07-01 10:03                   ` Will Deacon
  2020-07-01 11:40                   ` Peter Zijlstra
  1 sibling, 0 replies; 213+ messages in thread
From: Will Deacon @ 2020-07-01 10:03 UTC (permalink / raw)
  To: Marco Elver
  Cc: Paul E. McKenney, Peter Zijlstra, Nick Desaulniers,
	Sami Tolvanen, Masahiro Yamada, Greg Kroah-Hartman, Kees Cook,
	clang-built-linux, Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jul 01, 2020 at 11:41:17AM +0200, Marco Elver wrote:
> On Tue, 30 Jun 2020 at 22:30, Paul E. McKenney <paulmck@kernel.org> wrote:
> > On Tue, Jun 30, 2020 at 10:12:43PM +0200, Peter Zijlstra wrote:
> > > On Tue, Jun 30, 2020 at 09:19:31PM +0200, Marco Elver wrote:
> > > > So, we are probably better off untangling LTO from the story:
> > > >
> > > > 1. LTO or no LTO does not matter. The LTO series should not get tangled
> > > >    up with memory model issues.
> > > >
> > > > 2. The memory model question and problems need to be answered and
> > > >    addressed separately.
> > > >
> > > > Thoughts?
> > >
> > > How hard would it be to creates something that analyzes a build and
> > > looks for all 'dependent load -> control dependency' transformations
> > > headed by a volatile (and/or from asm) load and issues a warning for
> > > them?
> 
> I was thinking about this, but in the context of the "auto-promote to
> acquire" which you didn't like. Issuing a warning should certainly be
> simpler.
> 
> I think there is no one place where we know these transformations
> happen, but rather, need to analyze the IR before transformations,
> take note of all the dependent loads headed by volatile+asm, and then
> run an analysis after optimizations checking the dependencies are
> still there.
> 
> > > This would give us an indication of how valuable this transformation is
> > > for the kernel. I'm hoping/expecting it's vanishingly rare, but what do
> > > I know.
> >
> > This could be quite useful!
> 
> We might then even be able to say, "if you get this warning, turn on
> CONFIG_ACQUIRE_READ_DEPENDENCIES" (or however the option will be
> named). Or some other tricks, like automatically recompile the TU
> where this happens with the option. But again, this is not something
> that should specifically block LTO, because if we have this, we'll
> need to turn it on for everything.

I'm not especially keen on solving this with additional config options --
all it does it further fragment the number of kernels we have to care about
and distributions really won't be in a position to know whether this should
be enabled or not. I would prefer that the build fails, and we figure out
which compiler switch we need to stop the harmful optimisation taking place.
As Peter says, it _should_ be a rare thing to see (empirically, the kernel
seems to be getting away with it so far).

The problem, as I see it, is that the C language doesn't provide us with
a way to express dependency ordering and so we're at the mercy of the
compiler when we roll our own implementation. Paul continues to fight the
good fight at committee meetings to improve the situation, but in the
meantime we'd benefit from two things:

  1. A way to disable any compiler optimisations that break our dependency
     ordering in spite of READ_ONCE()

  2. A way to detect at build time if these harmful optimisations are taking
     place

Finally, while I agree that this problem isn't limited to LTO, my fear is
that LTO provides enough information for address dependencies headed by
a READ_ONCE() to be converted to control dependencies when some common
values of the pointer can be determined by the compiler. If we can rule
this sort of thing out, then great, but in the absence of (2) I think
throwing in an acquire is a sensible safety measure. Doesn't CFI rely
on LTO to do something similar for indirect branch targets, or have I
got that totally mixed up?

Will

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-01  9:41                 ` Marco Elver
  2020-07-01 10:03                   ` Will Deacon
@ 2020-07-01 11:40                   ` Peter Zijlstra
  2020-07-01 14:06                     ` Paul E. McKenney
  1 sibling, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-01 11:40 UTC (permalink / raw)
  To: Marco Elver
  Cc: Paul E. McKenney, Nick Desaulniers, Sami Tolvanen,
	Masahiro Yamada, Will Deacon, Greg Kroah-Hartman, Kees Cook,
	clang-built-linux, Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jul 01, 2020 at 11:41:17AM +0200, Marco Elver wrote:
> On Tue, 30 Jun 2020 at 22:30, Paul E. McKenney <paulmck@kernel.org> wrote:
> > On Tue, Jun 30, 2020 at 10:12:43PM +0200, Peter Zijlstra wrote:
> > > On Tue, Jun 30, 2020 at 09:19:31PM +0200, Marco Elver wrote:

> > > > Thoughts?
> > >
> > > How hard would it be to creates something that analyzes a build and
> > > looks for all 'dependent load -> control dependency' transformations
> > > headed by a volatile (and/or from asm) load and issues a warning for
> > > them?
> 
> I was thinking about this, but in the context of the "auto-promote to
> acquire" which you didn't like. Issuing a warning should certainly be
> simpler.
> 
> I think there is no one place where we know these transformations
> happen, but rather, need to analyze the IR before transformations,
> take note of all the dependent loads headed by volatile+asm, and then
> run an analysis after optimizations checking the dependencies are
> still there.

Urgh, that sounds nasty. The thing is, as I've hinted at in my other
reply, I would really like a compiler switch to disable this
optimization entirely -- knowing how relevant the trnaformation is, is
simply a first step towards that.

In order to control the tranformation, you have to actually know where
in the optimization passes it happens.

Also, if (big if in my book) we find the optimization is actually
beneficial, we can invert the warning when using the switch and warn
about lost optimization possibilities and manually re-write the code to
use control deps.

> > > This would give us an indication of how valuable this transformation is
> > > for the kernel. I'm hoping/expecting it's vanishingly rare, but what do
> > > I know.
> >
> > This could be quite useful!
> 
> We might then even be able to say, "if you get this warning, turn on
> CONFIG_ACQUIRE_READ_DEPENDENCIES" (or however the option will be
> named). 

I was going to suggest: if this happens, employ -fno-wreck-dependencies
:-)

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-01 11:40                   ` Peter Zijlstra
@ 2020-07-01 14:06                     ` Paul E. McKenney
  2020-07-01 15:05                       ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-01 14:06 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jul 01, 2020 at 01:40:27PM +0200, Peter Zijlstra wrote:
> On Wed, Jul 01, 2020 at 11:41:17AM +0200, Marco Elver wrote:
> > On Tue, 30 Jun 2020 at 22:30, Paul E. McKenney <paulmck@kernel.org> wrote:
> > > On Tue, Jun 30, 2020 at 10:12:43PM +0200, Peter Zijlstra wrote:
> > > > On Tue, Jun 30, 2020 at 09:19:31PM +0200, Marco Elver wrote:
> 
> > > > > Thoughts?
> > > >
> > > > How hard would it be to creates something that analyzes a build and
> > > > looks for all 'dependent load -> control dependency' transformations
> > > > headed by a volatile (and/or from asm) load and issues a warning for
> > > > them?
> > 
> > I was thinking about this, but in the context of the "auto-promote to
> > acquire" which you didn't like. Issuing a warning should certainly be
> > simpler.
> > 
> > I think there is no one place where we know these transformations
> > happen, but rather, need to analyze the IR before transformations,
> > take note of all the dependent loads headed by volatile+asm, and then
> > run an analysis after optimizations checking the dependencies are
> > still there.
> 
> Urgh, that sounds nasty. The thing is, as I've hinted at in my other
> reply, I would really like a compiler switch to disable this
> optimization entirely -- knowing how relevant the trnaformation is, is
> simply a first step towards that.
> 
> In order to control the tranformation, you have to actually know where
> in the optimization passes it happens.
> 
> Also, if (big if in my book) we find the optimization is actually
> beneficial, we can invert the warning when using the switch and warn
> about lost optimization possibilities and manually re-write the code to
> use control deps.

There are lots of optimization passes and any of them might decide to
destroy dependencies.  :-(

> > > > This would give us an indication of how valuable this transformation is
> > > > for the kernel. I'm hoping/expecting it's vanishingly rare, but what do
> > > > I know.
> > >
> > > This could be quite useful!
> > 
> > We might then even be able to say, "if you get this warning, turn on
> > CONFIG_ACQUIRE_READ_DEPENDENCIES" (or however the option will be
> > named). 
> 
> I was going to suggest: if this happens, employ -fno-wreck-dependencies
> :-)

The current state in the C++ committee is that marking variables
carrying dependencies is the way forward.  This is of course not what
the Linux kernel community does, but it should not be hard to have a
-fall-variables-dependent or some such that causes all variables to be
treated as if they were marked.  Though I was hoping for only pointers.
Are they -sure- that they -absolutely- need to carry dependencies
through integers???

Anyway, the next step is to provide this functionality in one of the
major compilers.  Akshat Garg started this in GCC as a GSoC project
by duplicating "volatile" functionality with a _Dependent_ptr keyword.
Next steps would include removing "volatile" functionality not required
for dependencies.  Here is a random posting, which if I remember correctly
raised some doubts as to whether "volatile" was really carried through
everywhere that it needs to for things like LTO:

https://gcc.gnu.org/legacy-ml/gcc/2019-07/msg00139.html

What happened to this effort?  Akshat graduated and got an unrelated
job, you know, the usual.  ;-)

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* RE: [PATCH 00/22] add support for Clang LTO
  2020-07-01  9:10                 ` Peter Zijlstra
@ 2020-07-01 14:20                   ` David Laight
  2020-07-01 16:06                     ` Paul E. McKenney
  0 siblings, 1 reply; 213+ messages in thread
From: David Laight @ 2020-07-01 14:20 UTC (permalink / raw)
  To: 'Peter Zijlstra', Paul E. McKenney
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

From: Peter Zijlstra
> Sent: 01 July 2020 10:11
> On Tue, Jun 30, 2020 at 01:30:16PM -0700, Paul E. McKenney wrote:
> > On Tue, Jun 30, 2020 at 10:12:43PM +0200, Peter Zijlstra wrote:
> 
> > > I'm not convinced C11 memory_order_consume would actually work for us,
> > > even if it would work. That is, given:
> > >
> > >   https://lore.kernel.org/lkml/20150520005510.GA23559@linux.vnet.ibm.com/
> > >
> > > only pointers can have consume, but like I pointed out, we have code
> > > that relies on dependent loads from integers.
> >
> > I agree that C11 memory_order_consume is not normally what we want,
> > given that it is universally promoted to memory_order_acquire.
> >
> > However, dependent loads from integers are, if anything, more difficult
> > to defend from the compiler than are control dependencies.  This applies
> > doubly to integers that are used to index two-element arrays, in which
> > case you are just asking the compiler to destroy your dependent loads
> > by converting them into control dependencies.
> 
> Yes, I'm aware. However, as you might know, I'm firmly in the 'C is a
> glorified assembler' camp (as I expect most actual OS people are, out of
> necessity if nothing else) and if I wanted a control dependency I
> would've bloody well written one.

I write in C because doing register tracking is hard :-)
I've got an hdlc implementation in C that is carefully adjusted
so that the worst case path is bounded.
I probably know every one of the 1000 instructions in it.

Would an asm statement that uses the same 'register' for input and
output but doesn't actually do anything help?
It won't generate any code, but the compiler ought to assume that
it might change the value - so can't do optimisations that track
the value across the call.

> I think an optimizing compiler is awesome, but only in so far as that
> optimization is actually helpful -- and yes, I just stepped into a giant
> twilight zone there. That is, any optimization that has _any_
> controversy should be controllable (like -fno-strict-overflow
> -fno-strict-aliasing) and I'd very much like the same here.

I'm fed up of gcc generating the code that uses SIMD instructions
for the 'tail' loop at the end of a function that is already doing
SIMD operations for the main part of the loop.
And compilers that convert a byte copy loop to 'rep movsb'.
If I'm copying 3 or 4 bytes I don't want a 40 clock overhead.

	David

-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK
Registration No: 1397386 (Wales)


^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-01 14:06                     ` Paul E. McKenney
@ 2020-07-01 15:05                       ` Peter Zijlstra
  2020-07-01 16:03                         ` Paul E. McKenney
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-01 15:05 UTC (permalink / raw)
  To: Paul E. McKenney
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jul 01, 2020 at 07:06:54AM -0700, Paul E. McKenney wrote:

> The current state in the C++ committee is that marking variables
> carrying dependencies is the way forward.  This is of course not what
> the Linux kernel community does, but it should not be hard to have a
> -fall-variables-dependent or some such that causes all variables to be
> treated as if they were marked.  Though I was hoping for only pointers.
> Are they -sure- that they -absolutely- need to carry dependencies
> through integers???

What's 'need'? :-)

I'm thinking __ktime_get_fast_ns() is better off with a dependent load
than it is with an extra smp_rmb().

Yes we can stick an smp_rmb() in there, but I don't like it. Like I
wrote earlier, if I wanted a control dependency, I'd have written one.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-01 15:05                       ` Peter Zijlstra
@ 2020-07-01 16:03                         ` Paul E. McKenney
  2020-07-02  8:20                           ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-01 16:03 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jul 01, 2020 at 05:05:12PM +0200, Peter Zijlstra wrote:
> On Wed, Jul 01, 2020 at 07:06:54AM -0700, Paul E. McKenney wrote:
> 
> > The current state in the C++ committee is that marking variables
> > carrying dependencies is the way forward.  This is of course not what
> > the Linux kernel community does, but it should not be hard to have a
> > -fall-variables-dependent or some such that causes all variables to be
> > treated as if they were marked.  Though I was hoping for only pointers.
> > Are they -sure- that they -absolutely- need to carry dependencies
> > through integers???
> 
> What's 'need'? :-)

Turning off all dependency-killing optimizations on all pointers is
likely a non-event.  Turning off all dependency-killing optimizations
on all integers is not the road to happiness.

So whatever "need" might be, it would need to be rather earthshaking.  ;-)
It is probably not -that- hard to convert to pointers, even if they
are indexing multiple arrays.

> I'm thinking __ktime_get_fast_ns() is better off with a dependent load
> than it is with an extra smp_rmb().
> 
> Yes we can stick an smp_rmb() in there, but I don't like it. Like I
> wrote earlier, if I wanted a control dependency, I'd have written one.

No argument here.

But it looks like we are going to have to tell the compiler.

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-01 14:20                   ` David Laight
@ 2020-07-01 16:06                     ` Paul E. McKenney
  2020-07-02  9:37                       ` David Laight
  0 siblings, 1 reply; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-01 16:06 UTC (permalink / raw)
  To: David Laight
  Cc: 'Peter Zijlstra',
	Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jul 01, 2020 at 02:20:13PM +0000, David Laight wrote:
> From: Peter Zijlstra
> > Sent: 01 July 2020 10:11
> > On Tue, Jun 30, 2020 at 01:30:16PM -0700, Paul E. McKenney wrote:
> > > On Tue, Jun 30, 2020 at 10:12:43PM +0200, Peter Zijlstra wrote:
> > 
> > > > I'm not convinced C11 memory_order_consume would actually work for us,
> > > > even if it would work. That is, given:
> > > >
> > > >   https://lore.kernel.org/lkml/20150520005510.GA23559@linux.vnet.ibm.com/
> > > >
> > > > only pointers can have consume, but like I pointed out, we have code
> > > > that relies on dependent loads from integers.
> > >
> > > I agree that C11 memory_order_consume is not normally what we want,
> > > given that it is universally promoted to memory_order_acquire.
> > >
> > > However, dependent loads from integers are, if anything, more difficult
> > > to defend from the compiler than are control dependencies.  This applies
> > > doubly to integers that are used to index two-element arrays, in which
> > > case you are just asking the compiler to destroy your dependent loads
> > > by converting them into control dependencies.
> > 
> > Yes, I'm aware. However, as you might know, I'm firmly in the 'C is a
> > glorified assembler' camp (as I expect most actual OS people are, out of
> > necessity if nothing else) and if I wanted a control dependency I
> > would've bloody well written one.
> 
> I write in C because doing register tracking is hard :-)
> I've got an hdlc implementation in C that is carefully adjusted
> so that the worst case path is bounded.
> I probably know every one of the 1000 instructions in it.
> 
> Would an asm statement that uses the same 'register' for input and
> output but doesn't actually do anything help?
> It won't generate any code, but the compiler ought to assume that
> it might change the value - so can't do optimisations that track
> the value across the call.

It might replace the volatile load, but there are optimizations that
apply to the downstream code as well.

Or are you suggesting periodically pushing the dependent variable
through this asm?  That might work, but it would be easier and
more maintainable to just mark the variable.

> > I think an optimizing compiler is awesome, but only in so far as that
> > optimization is actually helpful -- and yes, I just stepped into a giant
> > twilight zone there. That is, any optimization that has _any_
> > controversy should be controllable (like -fno-strict-overflow
> > -fno-strict-aliasing) and I'd very much like the same here.
> 
> I'm fed up of gcc generating the code that uses SIMD instructions
> for the 'tail' loop at the end of a function that is already doing
> SIMD operations for the main part of the loop.
> And compilers that convert a byte copy loop to 'rep movsb'.
> If I'm copying 3 or 4 bytes I don't want a 40 clock overhead.

Agreed, compilers can often be all too "helpful".  :-(

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-01 16:03                         ` Paul E. McKenney
@ 2020-07-02  8:20                           ` Peter Zijlstra
  2020-07-02 17:59                             ` Paul E. McKenney
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-02  8:20 UTC (permalink / raw)
  To: Paul E. McKenney
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Wed, Jul 01, 2020 at 09:03:38AM -0700, Paul E. McKenney wrote:

> But it looks like we are going to have to tell the compiler.

What does the current proposal look like? I can certainly annotate the
seqcount latch users, but who knows what other code is out there....

^ permalink raw reply	[flat|nested] 213+ messages in thread

* RE: [PATCH 00/22] add support for Clang LTO
  2020-07-01 16:06                     ` Paul E. McKenney
@ 2020-07-02  9:37                       ` David Laight
  2020-07-02 18:00                         ` Paul E. McKenney
  0 siblings, 1 reply; 213+ messages in thread
From: David Laight @ 2020-07-02  9:37 UTC (permalink / raw)
  To: 'paulmck@kernel.org'
  Cc: 'Peter Zijlstra',
	Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

From: Paul E. McKenney
> Sent: 01 July 2020 17:06
...
> > Would an asm statement that uses the same 'register' for input and
> > output but doesn't actually do anything help?
> > It won't generate any code, but the compiler ought to assume that
> > it might change the value - so can't do optimisations that track
> > the value across the call.
> 
> It might replace the volatile load, but there are optimizations that
> apply to the downstream code as well.
> 
> Or are you suggesting periodically pushing the dependent variable
> through this asm?  That might work, but it would be easier and
> more maintainable to just mark the variable.

Marking the variable requires compiler support.
Although what 'volatile register int foo;' means might be interesting.

So I was thinking that in the case mentioned earlier you do:
	ptr += LAUNDER(offset & 1);
to ensure the compiler didn't convert to:
	if (offset & 1) ptr++;
(Which is probably a pessimisation - the reverse is likely better.)

	David

-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK
Registration No: 1397386 (Wales)


^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-02  8:20                           ` Peter Zijlstra
@ 2020-07-02 17:59                             ` Paul E. McKenney
  2020-07-03 13:13                               ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-02 17:59 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Thu, Jul 02, 2020 at 10:20:40AM +0200, Peter Zijlstra wrote:
> On Wed, Jul 01, 2020 at 09:03:38AM -0700, Paul E. McKenney wrote:
> 
> > But it looks like we are going to have to tell the compiler.
> 
> What does the current proposal look like? I can certainly annotate the
> seqcount latch users, but who knows what other code is out there....

For pointers, yes, within the Linux kernel it is hopeless, thus the
thought of a -fall-dependent-ptr or some such that makes the compiler
pretend that each and every pointer is marked with the _Dependent_ptr
qualifier.

New non-Linux-kernel code might want to use his qualifier explicitly,
perhaps something like the following:

	_Dependent_ptr struct foo *p;  // Or maybe after the "*"?

	rcu_read_lock();
	p = rcu_dereference(gp);
	// And so on...

If a function is to take a dependent pointer as a function argument,
then the corresponding parameter need the _Dependent_ptr marking.
Ditto for return values.

The proposal did not cover integers due to concerns about the number of
optimization passes that would need to be reviewed to make that work.
Nevertheless, using a marked integer would be safer than using an unmarked
one, and if the review can be carried out, why not?  Maybe something
like this:

	_Dependent_ptr int idx;

	rcu_read_lock();
	idx = READ_ONCE(gidx);
	d = rcuarray[idx];
	rcu_read_unlock();
	do_something_with(d);

So use of this qualifier is quite reasonable.

The prototype for GCC is here: https://github.com/AKG001/gcc/

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-02  9:37                       ` David Laight
@ 2020-07-02 18:00                         ` Paul E. McKenney
  0 siblings, 0 replies; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-02 18:00 UTC (permalink / raw)
  To: David Laight
  Cc: 'Peter Zijlstra',
	Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Thu, Jul 02, 2020 at 09:37:26AM +0000, David Laight wrote:
> From: Paul E. McKenney
> > Sent: 01 July 2020 17:06
> ...
> > > Would an asm statement that uses the same 'register' for input and
> > > output but doesn't actually do anything help?
> > > It won't generate any code, but the compiler ought to assume that
> > > it might change the value - so can't do optimisations that track
> > > the value across the call.
> > 
> > It might replace the volatile load, but there are optimizations that
> > apply to the downstream code as well.
> > 
> > Or are you suggesting periodically pushing the dependent variable
> > through this asm?  That might work, but it would be easier and
> > more maintainable to just mark the variable.
> 
> Marking the variable requires compiler support.
> Although what 'volatile register int foo;' means might be interesting.
> 
> So I was thinking that in the case mentioned earlier you do:
> 	ptr += LAUNDER(offset & 1);
> to ensure the compiler didn't convert to:
> 	if (offset & 1) ptr++;
> (Which is probably a pessimisation - the reverse is likely better.)

Indeed, Akshat's prototype follows the "volatile" qualifier in many
ways.  https://github.com/AKG001/gcc/

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-02 17:59                             ` Paul E. McKenney
@ 2020-07-03 13:13                               ` Peter Zijlstra
  2020-07-03 13:25                                 ` Peter Zijlstra
  2020-07-03 14:42                                 ` Paul E. McKenney
  0 siblings, 2 replies; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-03 13:13 UTC (permalink / raw)
  To: Paul E. McKenney
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Thu, Jul 02, 2020 at 10:59:48AM -0700, Paul E. McKenney wrote:
> On Thu, Jul 02, 2020 at 10:20:40AM +0200, Peter Zijlstra wrote:
> > On Wed, Jul 01, 2020 at 09:03:38AM -0700, Paul E. McKenney wrote:
> > 
> > > But it looks like we are going to have to tell the compiler.
> > 
> > What does the current proposal look like? I can certainly annotate the
> > seqcount latch users, but who knows what other code is out there....
> 
> For pointers, yes, within the Linux kernel it is hopeless, thus the
> thought of a -fall-dependent-ptr or some such that makes the compiler
> pretend that each and every pointer is marked with the _Dependent_ptr
> qualifier.
> 
> New non-Linux-kernel code might want to use his qualifier explicitly,
> perhaps something like the following:
> 
> 	_Dependent_ptr struct foo *p;  // Or maybe after the "*"?

After, as you've written it, it's a pointer to a '_Dependent struct
foo'.

> 
> 	rcu_read_lock();
> 	p = rcu_dereference(gp);
> 	// And so on...
> 
> If a function is to take a dependent pointer as a function argument,
> then the corresponding parameter need the _Dependent_ptr marking.
> Ditto for return values.
> 
> The proposal did not cover integers due to concerns about the number of
> optimization passes that would need to be reviewed to make that work.
> Nevertheless, using a marked integer would be safer than using an unmarked
> one, and if the review can be carried out, why not?  Maybe something
> like this:
> 
> 	_Dependent_ptr int idx;
> 
> 	rcu_read_lock();
> 	idx = READ_ONCE(gidx);
> 	d = rcuarray[idx];
> 	rcu_read_unlock();
> 	do_something_with(d);
> 
> So use of this qualifier is quite reasonable.

The above usage might warrant a rename of the qualifier though, since
clearly there isn't anything ptr around.

> The prototype for GCC is here: https://github.com/AKG001/gcc/

Thanks! Those test cases are somewhat over qualified though:

       static volatile _Atomic (TYPE) * _Dependent_ptr a;     		\

Also, if C goes and specifies load dependencies, in any form, is then
not the corrolary that they need to specify control dependencies? How
else can they exclude the transformation.

And of course, once we're there, can we get explicit support for control
dependencies too? :-) :-)

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-03 13:13                               ` Peter Zijlstra
@ 2020-07-03 13:25                                 ` Peter Zijlstra
  2020-07-03 14:51                                   ` Paul E. McKenney
  2020-07-03 14:42                                 ` Paul E. McKenney
  1 sibling, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-03 13:25 UTC (permalink / raw)
  To: Paul E. McKenney
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Fri, Jul 03, 2020 at 03:13:30PM +0200, Peter Zijlstra wrote:
> > The prototype for GCC is here: https://github.com/AKG001/gcc/
> 
> Thanks! Those test cases are somewhat over qualified though:
> 
>        static volatile _Atomic (TYPE) * _Dependent_ptr a;     		\

One question though; since its a qualifier, and we've recently spend a
whole lot of effort to strip qualifiers in say READ_ONCE(), how does,
and how do we want, this qualifier to behave.

C++ has very convenient means of manipulating qualifiers, so it's not
much of a problem there, but for C it is, as we've found, really quite
cumbersome. Even with _Generic() we can't manipulate individual
qualifiers afaict.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-03 13:13                               ` Peter Zijlstra
  2020-07-03 13:25                                 ` Peter Zijlstra
@ 2020-07-03 14:42                                 ` Paul E. McKenney
  2020-07-06 16:26                                   ` Paul E. McKenney
  1 sibling, 1 reply; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-03 14:42 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Fri, Jul 03, 2020 at 03:13:30PM +0200, Peter Zijlstra wrote:
> On Thu, Jul 02, 2020 at 10:59:48AM -0700, Paul E. McKenney wrote:
> > On Thu, Jul 02, 2020 at 10:20:40AM +0200, Peter Zijlstra wrote:
> > > On Wed, Jul 01, 2020 at 09:03:38AM -0700, Paul E. McKenney wrote:
> > > 
> > > > But it looks like we are going to have to tell the compiler.
> > > 
> > > What does the current proposal look like? I can certainly annotate the
> > > seqcount latch users, but who knows what other code is out there....
> > 
> > For pointers, yes, within the Linux kernel it is hopeless, thus the
> > thought of a -fall-dependent-ptr or some such that makes the compiler
> > pretend that each and every pointer is marked with the _Dependent_ptr
> > qualifier.
> > 
> > New non-Linux-kernel code might want to use his qualifier explicitly,
> > perhaps something like the following:
> > 
> > 	_Dependent_ptr struct foo *p;  // Or maybe after the "*"?
> 
> After, as you've written it, it's a pointer to a '_Dependent struct
> foo'.

Yeah, I have to look that up every time.  :-/

Thank you for checking!

> > 	rcu_read_lock();
> > 	p = rcu_dereference(gp);
> > 	// And so on...
> > 
> > If a function is to take a dependent pointer as a function argument,
> > then the corresponding parameter need the _Dependent_ptr marking.
> > Ditto for return values.
> > 
> > The proposal did not cover integers due to concerns about the number of
> > optimization passes that would need to be reviewed to make that work.
> > Nevertheless, using a marked integer would be safer than using an unmarked
> > one, and if the review can be carried out, why not?  Maybe something
> > like this:
> > 
> > 	_Dependent_ptr int idx;
> > 
> > 	rcu_read_lock();
> > 	idx = READ_ONCE(gidx);
> > 	d = rcuarray[idx];
> > 	rcu_read_unlock();
> > 	do_something_with(d);
> > 
> > So use of this qualifier is quite reasonable.
> 
> The above usage might warrant a rename of the qualifier though, since
> clearly there isn't anything ptr around.

Given the large number of additional optimizations that need to be
suppressed in the non-pointer case, any discouragement based on the "_ptr"
at the end of the name is all to the good.

And if that line of reasoning is unconvincing, please look at the program
at the end of this email, which compiles without errors with -Wall and
gives the expected output.  ;-)

> > The prototype for GCC is here: https://github.com/AKG001/gcc/
> 
> Thanks! Those test cases are somewhat over qualified though:
> 
>        static volatile _Atomic (TYPE) * _Dependent_ptr a;     		\

Especially given that in C, _Atomic operations are implicitly volatile.
But this is likely a holdover from Akshat's implementation strategy,
which was to pattern _Dependent_ptr after the volatile keyword.

> Also, if C goes and specifies load dependencies, in any form, is then
> not the corrolary that they need to specify control dependencies? How
> else can they exclude the transformation.

By requiring that any temporaries generated from variables that are
marked _Dependent_ptr also be marked _Dependent_ptr.  This is of course
one divergence of _Dependent_ptr from the volatile keyword.

> And of course, once we're there, can we get explicit support for control
> dependencies too? :-) :-)

Keep talking like this and I am going to make sure that you attend a
standards committee meeting.  If need be, by arranging for you to be
physically dragged there.  ;-)

More seriously, for control dependencies, the variable that would need
to be marked would be the program counter, which might require some
additional syntax.

							Thanx, Paul

------------------------------------------------------------------------

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

int foo(int *p, int i)
{
	return i[p];
}

int arr[] = { 0, 1, 4, 9, 16, 25, 36, 49, 64, 81, 100, 121, 144, };

int main(int argc, char *argv[])
{
	int i = atoi(argv[1]);

	printf("%d[arr] = %d\n", i, foo(arr, i));
	return 0;
}

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-03 13:25                                 ` Peter Zijlstra
@ 2020-07-03 14:51                                   ` Paul E. McKenney
  0 siblings, 0 replies; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-03 14:51 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Fri, Jul 03, 2020 at 03:25:23PM +0200, Peter Zijlstra wrote:
> On Fri, Jul 03, 2020 at 03:13:30PM +0200, Peter Zijlstra wrote:
> > > The prototype for GCC is here: https://github.com/AKG001/gcc/
> > 
> > Thanks! Those test cases are somewhat over qualified though:
> > 
> >        static volatile _Atomic (TYPE) * _Dependent_ptr a;     		\
> 
> One question though; since its a qualifier, and we've recently spend a
> whole lot of effort to strip qualifiers in say READ_ONCE(), how does,
> and how do we want, this qualifier to behave.

Dereferencing a _Dependent_ptr pointer gives you something that is not
_Dependent_ptr, unless the declaration was like this:

	_Dependent_ptr _Atomic (TYPE) * _Dependent_ptr a;

And if I recall correctly, the current state is that assigning a
_Dependent_ptr variable to a non-_Dependent_ptr variable strips this
marking (though the thought was to be able to ask for a warning).

So, yes, it would be nice to be able to explicitly strip the
_Dependent_ptr, perhaps the kill_dependency() macro, which is already
in the C standard.

> C++ has very convenient means of manipulating qualifiers, so it's not
> much of a problem there, but for C it is, as we've found, really quite
> cumbersome. Even with _Generic() we can't manipulate individual
> qualifiers afaict.

Fair point, and in C++ this is a templated class, at least in the same
sense that std::atomic<> is a templated class.

But in this case, would kill_dependency do what you want?

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-03 14:42                                 ` Paul E. McKenney
@ 2020-07-06 16:26                                   ` Paul E. McKenney
  2020-07-06 18:29                                     ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-06 16:26 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Fri, Jul 03, 2020 at 07:42:28AM -0700, Paul E. McKenney wrote:
> On Fri, Jul 03, 2020 at 03:13:30PM +0200, Peter Zijlstra wrote:
> > On Thu, Jul 02, 2020 at 10:59:48AM -0700, Paul E. McKenney wrote:
> > > On Thu, Jul 02, 2020 at 10:20:40AM +0200, Peter Zijlstra wrote:
> > > > On Wed, Jul 01, 2020 at 09:03:38AM -0700, Paul E. McKenney wrote:

[ . . . ]

> > Also, if C goes and specifies load dependencies, in any form, is then
> > not the corrolary that they need to specify control dependencies? How
> > else can they exclude the transformation.
> 
> By requiring that any temporaries generated from variables that are
> marked _Dependent_ptr also be marked _Dependent_ptr.  This is of course
> one divergence of _Dependent_ptr from the volatile keyword.
> 
> > And of course, once we're there, can we get explicit support for control
> > dependencies too? :-) :-)
> 
> Keep talking like this and I am going to make sure that you attend a
> standards committee meeting.  If need be, by arranging for you to be
> physically dragged there.  ;-)
> 
> More seriously, for control dependencies, the variable that would need
> to be marked would be the program counter, which might require some
> additional syntax.

And perhaps more constructively, we do need to prioritize address and data
dependencies over control dependencies.  For one thing, there are a lot
more address/data dependencies in existing code than there are control
dependencies, and (sadly, perhaps more importantly) there are a lot more
people who are convinced that address/data dependencies are important.

For another (admittedly more theoretical) thing, the OOTA scenarios
stemming from control dependencies are a lot less annoying than those
from address/data dependencies.

And address/data dependencies are as far as I know vulnerable to things
like conditional-move instructions that can cause problems for control
dependencies.

Nevertheless, yes, control dependencies also need attention.

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-06 16:26                                   ` Paul E. McKenney
@ 2020-07-06 18:29                                     ` Peter Zijlstra
  2020-07-06 18:39                                       ` Paul E. McKenney
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-06 18:29 UTC (permalink / raw)
  To: Paul E. McKenney
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Mon, Jul 06, 2020 at 09:26:33AM -0700, Paul E. McKenney wrote:

> And perhaps more constructively, we do need to prioritize address and data
> dependencies over control dependencies.  For one thing, there are a lot
> more address/data dependencies in existing code than there are control
> dependencies, and (sadly, perhaps more importantly) there are a lot more
> people who are convinced that address/data dependencies are important.

If they do not consider their Linux OS running correctly :-)

> For another (admittedly more theoretical) thing, the OOTA scenarios
> stemming from control dependencies are a lot less annoying than those
> from address/data dependencies.
> 
> And address/data dependencies are as far as I know vulnerable to things
> like conditional-move instructions that can cause problems for control
> dependencies.
> 
> Nevertheless, yes, control dependencies also need attention.

Today I added one more \o/

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-06 18:29                                     ` Peter Zijlstra
@ 2020-07-06 18:39                                       ` Paul E. McKenney
  2020-07-06 19:40                                         ` Peter Zijlstra
  0 siblings, 1 reply; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-06 18:39 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Mon, Jul 06, 2020 at 08:29:26PM +0200, Peter Zijlstra wrote:
> On Mon, Jul 06, 2020 at 09:26:33AM -0700, Paul E. McKenney wrote:
> 
> > And perhaps more constructively, we do need to prioritize address and data
> > dependencies over control dependencies.  For one thing, there are a lot
> > more address/data dependencies in existing code than there are control
> > dependencies, and (sadly, perhaps more importantly) there are a lot more
> > people who are convinced that address/data dependencies are important.
> 
> If they do not consider their Linux OS running correctly :-)

Many of them really do not care at all.  In fact, some would consider
Linux failing to run as an added bonus.

> > For another (admittedly more theoretical) thing, the OOTA scenarios
> > stemming from control dependencies are a lot less annoying than those
> > from address/data dependencies.
> > 
> > And address/data dependencies are as far as I know vulnerable to things
> > like conditional-move instructions that can cause problems for control
> > dependencies.
> > 
> > Nevertheless, yes, control dependencies also need attention.
> 
> Today I added one more \o/

Just make sure you continually check to make sure that compilers
don't break it, along with the others you have added.  ;-)

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-06 18:39                                       ` Paul E. McKenney
@ 2020-07-06 19:40                                         ` Peter Zijlstra
  2020-07-06 23:41                                           ` Paul E. McKenney
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-06 19:40 UTC (permalink / raw)
  To: Paul E. McKenney
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Mon, Jul 06, 2020 at 11:39:33AM -0700, Paul E. McKenney wrote:
> On Mon, Jul 06, 2020 at 08:29:26PM +0200, Peter Zijlstra wrote:
> > On Mon, Jul 06, 2020 at 09:26:33AM -0700, Paul E. McKenney wrote:

> > If they do not consider their Linux OS running correctly :-)
> 
> Many of them really do not care at all.  In fact, some would consider
> Linux failing to run as an added bonus.

This I think is why we have compiler people in the thread that care a
lot more.

> > > Nevertheless, yes, control dependencies also need attention.
> > 
> > Today I added one more \o/
> 
> Just make sure you continually check to make sure that compilers
> don't break it, along with the others you have added.  ;-)

There's:

kernel/locking/mcs_spinlock.h:  smp_cond_load_acquire(l, VAL);                          \
kernel/sched/core.c:                    smp_cond_load_acquire(&p->on_cpu, !VAL);
kernel/smp.c:   smp_cond_load_acquire(&csd->node.u_flags, !(VAL & CSD_FLAG_LOCK));

arch/x86/kernel/alternative.c:          atomic_cond_read_acquire(&desc.refs, !VAL);
kernel/locking/qrwlock.c:               atomic_cond_read_acquire(&lock->cnts, !(VAL & _QW_LOCKED));
kernel/locking/qrwlock.c:       atomic_cond_read_acquire(&lock->cnts, !(VAL & _QW_LOCKED));
kernel/locking/qrwlock.c:               atomic_cond_read_acquire(&lock->cnts, VAL == _QW_WAITING);
kernel/locking/qspinlock.c:             atomic_cond_read_acquire(&lock->val, !(VAL & _Q_LOCKED_MASK));
kernel/locking/qspinlock.c:     val = atomic_cond_read_acquire(&lock->val, !(VAL & _Q_LOCKED_PENDING_MASK));

include/linux/refcount.h:               smp_acquire__after_ctrl_dep();
ipc/mqueue.c:                   smp_acquire__after_ctrl_dep();
ipc/msg.c:                      smp_acquire__after_ctrl_dep();
ipc/sem.c:                      smp_acquire__after_ctrl_dep();
kernel/locking/rwsem.c:                 smp_acquire__after_ctrl_dep();
kernel/sched/core.c:    smp_acquire__after_ctrl_dep();

kernel/events/ring_buffer.c:__perf_output_begin()

And I'm fairly sure I'm forgetting some... One could argue there's too
many of them to check already.

Both GCC and CLANG had better think about it.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-06 19:40                                         ` Peter Zijlstra
@ 2020-07-06 23:41                                           ` Paul E. McKenney
  0 siblings, 0 replies; 213+ messages in thread
From: Paul E. McKenney @ 2020-07-06 23:41 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Marco Elver, Nick Desaulniers, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Kees Cook, clang-built-linux,
	Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Mon, Jul 06, 2020 at 09:40:12PM +0200, Peter Zijlstra wrote:
> On Mon, Jul 06, 2020 at 11:39:33AM -0700, Paul E. McKenney wrote:
> > On Mon, Jul 06, 2020 at 08:29:26PM +0200, Peter Zijlstra wrote:
> > > On Mon, Jul 06, 2020 at 09:26:33AM -0700, Paul E. McKenney wrote:
> 
> > > If they do not consider their Linux OS running correctly :-)
> > 
> > Many of them really do not care at all.  In fact, some would consider
> > Linux failing to run as an added bonus.
> 
> This I think is why we have compiler people in the thread that care a
> lot more.

Here is hoping! ;-)

> > > > Nevertheless, yes, control dependencies also need attention.
> > > 
> > > Today I added one more \o/
> > 
> > Just make sure you continually check to make sure that compilers
> > don't break it, along with the others you have added.  ;-)
> 
> There's:
> 
> kernel/locking/mcs_spinlock.h:  smp_cond_load_acquire(l, VAL);                          \
> kernel/sched/core.c:                    smp_cond_load_acquire(&p->on_cpu, !VAL);
> kernel/smp.c:   smp_cond_load_acquire(&csd->node.u_flags, !(VAL & CSD_FLAG_LOCK));
> 
> arch/x86/kernel/alternative.c:          atomic_cond_read_acquire(&desc.refs, !VAL);
> kernel/locking/qrwlock.c:               atomic_cond_read_acquire(&lock->cnts, !(VAL & _QW_LOCKED));
> kernel/locking/qrwlock.c:       atomic_cond_read_acquire(&lock->cnts, !(VAL & _QW_LOCKED));
> kernel/locking/qrwlock.c:               atomic_cond_read_acquire(&lock->cnts, VAL == _QW_WAITING);
> kernel/locking/qspinlock.c:             atomic_cond_read_acquire(&lock->val, !(VAL & _Q_LOCKED_MASK));
> kernel/locking/qspinlock.c:     val = atomic_cond_read_acquire(&lock->val, !(VAL & _Q_LOCKED_PENDING_MASK));
> 
> include/linux/refcount.h:               smp_acquire__after_ctrl_dep();
> ipc/mqueue.c:                   smp_acquire__after_ctrl_dep();
> ipc/msg.c:                      smp_acquire__after_ctrl_dep();
> ipc/sem.c:                      smp_acquire__after_ctrl_dep();
> kernel/locking/rwsem.c:                 smp_acquire__after_ctrl_dep();
> kernel/sched/core.c:    smp_acquire__after_ctrl_dep();
> 
> kernel/events/ring_buffer.c:__perf_output_begin()
> 
> And I'm fairly sure I'm forgetting some... One could argue there's too
> many of them to check already.
> 
> Both GCC and CLANG had better think about it.

That would be good!

I won't list the number of address/data dependencies given that there
are well over a thousand of them.

							Thanx, Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-29 23:20   ` Sami Tolvanen
@ 2020-07-07 15:51     ` Sami Tolvanen
  2020-07-07 16:05       ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-07-07 15:51 UTC (permalink / raw)
  To: Masahiro Yamada, Jiong Wang, Jakub Kicinski
  Cc: Will Deacon, Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, Kernel Hardening,
	linux-arch, linux-arm-kernel, Linux Kbuild mailing list,
	Linux Kernel Mailing List, linux-pci, X86 ML

On Mon, Jun 29, 2020 at 04:20:59PM -0700, Sami Tolvanen wrote:
> Hi Masahiro,
> 
> On Mon, Jun 29, 2020 at 01:56:19AM +0900, Masahiro Yamada wrote:
> > I also got an error for
> > ARCH=arm64 allyesconfig + CONFIG_LTO_CLANG=y
> > 
> > 
> > 
> > $ make ARCH=arm64 LLVM=1 LLVM_IAS=1
> > CROSS_COMPILE=~/tools/aarch64-linaro-7.5/bin/aarch64-linux-gnu-
> > -j24
> > 
> >   ...
> > 
> >   GEN     .version
> >   CHK     include/generated/compile.h
> >   UPD     include/generated/compile.h
> >   CC      init/version.o
> >   AR      init/built-in.a
> >   GEN     .tmp_initcalls.lds
> >   GEN     .tmp_symversions.lds
> >   LTO     vmlinux.o
> >   MODPOST vmlinux.symvers
> >   MODINFO modules.builtin.modinfo
> >   GEN     modules.builtin
> >   LD      .tmp_vmlinux.kallsyms1
> > ld.lld: error: undefined symbol: __compiletime_assert_905
> > >>> referenced by irqbypass.c
> > >>>               vmlinux.o:(jeq_imm)
> > make: *** [Makefile:1161: vmlinux] Error 1
> 
> I can reproduce this with ToT LLVM and it's BUILD_BUG_ON_MSG(..., "value
> too large for the field") in drivers/net/ethernet/netronome/nfp/bpf/jit.c.
> Specifically, the FIELD_FIT / __BF_FIELD_CHECK macro in ur_load_imm_any.
> 
> This compiles just fine with an earlier LLVM revision, so it could be a
> relatively recent regression. I'll take a look. Thanks for catching this!

After spending some time debugging this with Nick, it looks like the
error is caused by a recent optimization change in LLVM, which together
with the inlining of ur_load_imm_any into jeq_imm, changes a runtime
check in FIELD_FIT that would always fail, to a compile-time check that
breaks the build. In jeq_imm, we have:

    /* struct bpf_insn: _s32 imm */
    u64 imm = insn->imm; /* sign extend */
    ...
    if (imm >> 32) { /* non-zero only if insn->imm is negative */
    	/* inlined from ur_load_imm_any */
	u32 __imm = imm >> 32; /* therefore, always 0xffffffff */

        /*
	 * __imm has a value known at compile-time, which means
	 * __builtin_constant_p(__imm) is true and we end up with
	 * essentially this in __BF_FIELD_CHECK:
	 */
	if (__builtin_constant_p(__imm) && __imm <= 255)
	      __compiletime_assert_N();

The compile-time check comes from the following BUILD_BUG_ON_MSG:

    #define __BF_FIELD_CHECK(_mask, _reg, _val, _pfx)		\
    ...
	BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ?		\
			 ~((_mask) >> __bf_shf(_mask)) & (_val) : 0, \
			 _pfx "value too large for the field"); \

While we could stop the compiler from performing this optimization by
telling it to never inline ur_load_imm_any, we feel like a better fix
might be to replace FIELD_FIT(UR_REG_IMM_MAX, imm) with a simple imm
<= UR_REG_IMM_MAX check that won't trip a compile-time assertion even
when the condition is known to fail.

Jiong, Jakub, do you see any issues here?

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-07 15:51     ` Sami Tolvanen
@ 2020-07-07 16:05       ` Sami Tolvanen
  2020-07-07 16:56         ` Jakub Kicinski
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-07-07 16:05 UTC (permalink / raw)
  To: Masahiro Yamada, Jakub Kicinski
  Cc: Will Deacon, Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, Kernel Hardening,
	linux-arch, linux-arm-kernel, Linux Kbuild mailing list,
	Linux Kernel Mailing List, linux-pci, X86 ML

On Tue, Jul 07, 2020 at 08:51:07AM -0700, Sami Tolvanen wrote:
> After spending some time debugging this with Nick, it looks like the
> error is caused by a recent optimization change in LLVM, which together
> with the inlining of ur_load_imm_any into jeq_imm, changes a runtime
> check in FIELD_FIT that would always fail, to a compile-time check that
> breaks the build. In jeq_imm, we have:
> 
>     /* struct bpf_insn: _s32 imm */
>     u64 imm = insn->imm; /* sign extend */
>     ...
>     if (imm >> 32) { /* non-zero only if insn->imm is negative */
>     	/* inlined from ur_load_imm_any */
> 	u32 __imm = imm >> 32; /* therefore, always 0xffffffff */
> 
>         /*
> 	 * __imm has a value known at compile-time, which means
> 	 * __builtin_constant_p(__imm) is true and we end up with
> 	 * essentially this in __BF_FIELD_CHECK:
> 	 */
> 	if (__builtin_constant_p(__imm) && __imm <= 255)

Should be __imm > 255, of course, which means the compiler will generate
a call to __compiletime_assert.

> Jiong, Jakub, do you see any issues here?

(Jiong's email bounced, so removing from the recipient list.)

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-07 16:05       ` Sami Tolvanen
@ 2020-07-07 16:56         ` Jakub Kicinski
  2020-07-07 17:17           ` Nick Desaulniers
  0 siblings, 1 reply; 213+ messages in thread
From: Jakub Kicinski @ 2020-07-07 16:56 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel,
	Linux Kbuild mailing list, Linux Kernel Mailing List, linux-pci,
	X86 ML

On Tue, 7 Jul 2020 09:05:28 -0700 Sami Tolvanen wrote:
> On Tue, Jul 07, 2020 at 08:51:07AM -0700, Sami Tolvanen wrote:
> > After spending some time debugging this with Nick, it looks like the
> > error is caused by a recent optimization change in LLVM, which together
> > with the inlining of ur_load_imm_any into jeq_imm, changes a runtime
> > check in FIELD_FIT that would always fail, to a compile-time check that
> > breaks the build. In jeq_imm, we have:
> > 
> >     /* struct bpf_insn: _s32 imm */
> >     u64 imm = insn->imm; /* sign extend */
> >     ...
> >     if (imm >> 32) { /* non-zero only if insn->imm is negative */
> >     	/* inlined from ur_load_imm_any */
> > 	u32 __imm = imm >> 32; /* therefore, always 0xffffffff */
> > 
> >         /*
> > 	 * __imm has a value known at compile-time, which means
> > 	 * __builtin_constant_p(__imm) is true and we end up with
> > 	 * essentially this in __BF_FIELD_CHECK:
> > 	 */
> > 	if (__builtin_constant_p(__imm) && __imm <= 255)  
> 
> Should be __imm > 255, of course, which means the compiler will generate
> a call to __compiletime_assert.

I think FIELD_FIT() should not pass the value into __BF_FIELD_CHECK().

So:

diff --git a/include/linux/bitfield.h b/include/linux/bitfield.h
index 48ea093ff04c..4e035aca6f7e 100644
--- a/include/linux/bitfield.h
+++ b/include/linux/bitfield.h
@@ -77,7 +77,7 @@
  */
 #define FIELD_FIT(_mask, _val)                                         \
        ({                                                              \
-               __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_FIT: ");     \
+               __BF_FIELD_CHECK(_mask, 0ULL, 0ULL, "FIELD_FIT: ");     \
                !((((typeof(_mask))_val) << __bf_shf(_mask)) & ~(_mask)); \
        })
 
It's perfectly legal to pass a constant which does not fit, in which
case FIELD_FIT() should just return false not break the build.

Right?

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-07 16:56         ` Jakub Kicinski
@ 2020-07-07 17:17           ` Nick Desaulniers
  2020-07-07 17:30             ` Jakub Kicinski
  0 siblings, 1 reply; 213+ messages in thread
From: Nick Desaulniers @ 2020-07-07 17:17 UTC (permalink / raw)
  To: Jakub Kicinski
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, linux-arm-kernel, Linux Kbuild mailing list,
	Linux Kernel Mailing List, linux-pci, X86 ML

On Tue, Jul 7, 2020 at 9:56 AM Jakub Kicinski <kuba@kernel.org> wrote:
>
> > On Tue, Jul 07, 2020 at 08:51:07AM -0700, Sami Tolvanen wrote:
> > > After spending some time debugging this with Nick, it looks like the
> > > error is caused by a recent optimization change in LLVM, which together
> > > with the inlining of ur_load_imm_any into jeq_imm, changes a runtime
> > > check in FIELD_FIT that would always fail, to a compile-time check that
> > > breaks the build. In jeq_imm, we have:
> > >
> > >     /* struct bpf_insn: _s32 imm */
> > >     u64 imm = insn->imm; /* sign extend */
> > >     ...
> > >     if (imm >> 32) { /* non-zero only if insn->imm is negative */
> > >             /* inlined from ur_load_imm_any */
> > >     u32 __imm = imm >> 32; /* therefore, always 0xffffffff */
> > >
> > >         /*
> > >      * __imm has a value known at compile-time, which means
> > >      * __builtin_constant_p(__imm) is true and we end up with
> > >      * essentially this in __BF_FIELD_CHECK:
> > >      */
> > >     if (__builtin_constant_p(__imm) && __imm > 255)
>
> I think FIELD_FIT() should not pass the value into __BF_FIELD_CHECK().
>
> So:
>
> diff --git a/include/linux/bitfield.h b/include/linux/bitfield.h
> index 48ea093ff04c..4e035aca6f7e 100644
> --- a/include/linux/bitfield.h
> +++ b/include/linux/bitfield.h
> @@ -77,7 +77,7 @@
>   */
>  #define FIELD_FIT(_mask, _val)                                         \
>         ({                                                              \
> -               __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_FIT: ");     \
> +               __BF_FIELD_CHECK(_mask, 0ULL, 0ULL, "FIELD_FIT: ");     \
>                 !((((typeof(_mask))_val) << __bf_shf(_mask)) & ~(_mask)); \
>         })
>
> It's perfectly legal to pass a constant which does not fit, in which
> case FIELD_FIT() should just return false not break the build.
>
> Right?

I see the value of the __builtin_constant_p check; this is just a very
interesting case where rather than an integer literal appearing in the
source, the compiler is able to deduce that the parameter can only
have one value in one case, and allows __builtin_constant_p to
evaluate to true for it.

I had definitely asked Sami about the comment above FIELD_FIT:
"""
 76  * Return: true if @_val can fit inside @_mask, false if @_val is
too big.
"""
in which FIELD_FIT doesn't return false if @_val is too big and a
compile time constant. (Rather it breaks the build).

Of the 14 expansion sites of FIELD_FIT I see in mainline, it doesn't
look like any integral literals are passed, so maybe the compile time
checks of _val are of little value for FIELD_FIT.

So I think your suggested diff is the most concise fix.
-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-07 17:17           ` Nick Desaulniers
@ 2020-07-07 17:30             ` Jakub Kicinski
  0 siblings, 0 replies; 213+ messages in thread
From: Jakub Kicinski @ 2020-07-07 17:30 UTC (permalink / raw)
  To: Nick Desaulniers
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, clang-built-linux, Kernel Hardening,
	linux-arch, linux-arm-kernel, Linux Kbuild mailing list,
	Linux Kernel Mailing List, linux-pci, X86 ML

On Tue, 7 Jul 2020 10:17:25 -0700 Nick Desaulniers wrote:
> On Tue, Jul 7, 2020 at 9:56 AM Jakub Kicinski <kuba@kernel.org> wrote:
> >  
> > > On Tue, Jul 07, 2020 at 08:51:07AM -0700, Sami Tolvanen wrote:  
> > > > After spending some time debugging this with Nick, it looks like the
> > > > error is caused by a recent optimization change in LLVM, which together
> > > > with the inlining of ur_load_imm_any into jeq_imm, changes a runtime
> > > > check in FIELD_FIT that would always fail, to a compile-time check that
> > > > breaks the build. In jeq_imm, we have:
> > > >
> > > >     /* struct bpf_insn: _s32 imm */
> > > >     u64 imm = insn->imm; /* sign extend */
> > > >     ...
> > > >     if (imm >> 32) { /* non-zero only if insn->imm is negative */
> > > >             /* inlined from ur_load_imm_any */
> > > >     u32 __imm = imm >> 32; /* therefore, always 0xffffffff */
> > > >
> > > >         /*
> > > >      * __imm has a value known at compile-time, which means
> > > >      * __builtin_constant_p(__imm) is true and we end up with
> > > >      * essentially this in __BF_FIELD_CHECK:
> > > >      */
> > > >     if (__builtin_constant_p(__imm) && __imm > 255)  
> >
> > I think FIELD_FIT() should not pass the value into __BF_FIELD_CHECK().
> >
> > So:
> >
> > diff --git a/include/linux/bitfield.h b/include/linux/bitfield.h
> > index 48ea093ff04c..4e035aca6f7e 100644
> > --- a/include/linux/bitfield.h
> > +++ b/include/linux/bitfield.h
> > @@ -77,7 +77,7 @@
> >   */
> >  #define FIELD_FIT(_mask, _val)                                         \
> >         ({                                                              \
> > -               __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_FIT: ");     \
> > +               __BF_FIELD_CHECK(_mask, 0ULL, 0ULL, "FIELD_FIT: ");     \
> >                 !((((typeof(_mask))_val) << __bf_shf(_mask)) & ~(_mask)); \
> >         })
> >
> > It's perfectly legal to pass a constant which does not fit, in which
> > case FIELD_FIT() should just return false not break the build.
> >
> > Right?  
> 
> I see the value of the __builtin_constant_p check; this is just a very
> interesting case where rather than an integer literal appearing in the
> source, the compiler is able to deduce that the parameter can only
> have one value in one case, and allows __builtin_constant_p to
> evaluate to true for it.
> 
> I had definitely asked Sami about the comment above FIELD_FIT:
> """
>  76  * Return: true if @_val can fit inside @_mask, false if @_val is
> too big.
> """
> in which FIELD_FIT doesn't return false if @_val is too big and a
> compile time constant. (Rather it breaks the build).
> 
> Of the 14 expansion sites of FIELD_FIT I see in mainline, it doesn't
> look like any integral literals are passed, so maybe the compile time
> checks of _val are of little value for FIELD_FIT.

Also I just double checked and all FIELD_FIT() uses check the return
value.

> So I think your suggested diff is the most concise fix.

Feel free to submit that officially as a patch if it fixes the build
for you, here's my sign-off:

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (23 preceding siblings ...)
  2020-06-28 16:56 ` Masahiro Yamada
@ 2020-07-11 16:32 ` Paul Menzel
  2020-07-12  8:59   ` Sedat Dilek
  2020-07-12 23:34   ` Sami Tolvanen
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
  25 siblings, 2 replies; 213+ messages in thread
From: Paul Menzel @ 2020-07-11 16:32 UTC (permalink / raw)
  To: Sami Tolvanen, Masahiro Yamada, Will Deacon
  Cc: Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, clang-built-linux, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86

Dear Sami,


Am 24.06.20 um 22:31 schrieb Sami Tolvanen:
> This patch series adds support for building x86_64 and arm64 kernels
> with Clang's Link Time Optimization (LTO).
> 
> In addition to performance, the primary motivation for LTO is to allow
> Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> Pixel devices have shipped with LTO+CFI kernels since 2018.
> 
> Most of the patches are build system changes for handling LLVM bitcode,
> which Clang produces with LTO instead of ELF object files, postponing
> ELF processing until a later stage, and ensuring initcall ordering.
> 
> Note that first objtool patch in the series is already in linux-next,
> but as it's needed with LTO, I'm including it also here to make testing
> easier.

[…]

Thank you very much for sending these changes.

Do you have a branch, where your current work can be pulled from? Your 
branch on GitHub [1] seems 15 months old.

Out of curiosity, I applied the changes, allowed the selection for i386 
(x86), and with Clang 1:11~++20200701093119+ffee8040534-1~exp1 from 
Debian experimental, it failed with `Invalid absolute R_386_32 
relocation: KERNEL_PAGES`:

> make -f ./scripts/Makefile.build obj=arch/x86/boot arch/x86/boot/bzImage
> make -f ./scripts/Makefile.build obj=arch/x86/boot/compressed arch/x86/boot/compressed/vmlinux
>   llvm-nm vmlinux | sed -n -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(_text\|__bss_start\|_end\)$/#define VO_ _AC(0x,UL)/p' > arch/x86/boot/compressed/../voffset.h
>   clang -Wp,-MMD,arch/x86/boot/compressed/.misc.o.d -nostdinc -isystem /usr/lib/llvm-11/lib/clang/11.0.0/include -I./arch/x86/include -I./arch/x86/include/generated  -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h -include ./include/linux/compiler_types.h -D__KERNEL__ -Qunused-arguments -m32 -O2 -fno-strict-aliasing -fPIE -DDISABLE_BRANCH_PROFILING -march=i386 -mno-mmx -mno-sse -ffreestanding -fno-stack-protector -Wno-address-of-packed-member -Wno-gnu -Wno-pointer-sign -fmacro-prefix-map=./= -fno-asynchronous-unwind-tables    -DKBUILD_MODFILE='"arch/x86/boot/compressed/misc"' -DKBUILD_BASENAME='"misc"' -DKBUILD_MODNAME='"misc"' -D__KBUILD_MODNAME=misc -c -o arch/x86/boot/compressed/misc.o arch/x86/boot/compressed/misc.c
>   llvm-objcopy  -R .comment -S vmlinux arch/x86/boot/compressed/vmlinux.bin
>   arch/x86/tools/relocs vmlinux > arch/x86/boot/compressed/vmlinux.relocs;arch/x86/tools/relocs --abs-relocs vmlinux
> Invalid absolute R_386_32 relocation: KERNEL_PAGES
> make[2]: *** [arch/x86/boot/compressed/Makefile:134: arch/x86/boot/compressed/vmlinux.relocs] Error 1
> make[2]: *** Deleting file 'arch/x86/boot/compressed/vmlinux.relocs'
> make[1]: *** [arch/x86/boot/Makefile:115: arch/x86/boot/compressed/vmlinux] Error 2
> make: *** [arch/x86/Makefile:268: bzImage] Error 2


Kind regards,

Paul



[1]: https://github.com/samitolvanen/linux/tree/clang-lto

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-11 16:32 ` Paul Menzel
@ 2020-07-12  8:59   ` Sedat Dilek
  2020-07-12 18:40     ` Nathan Chancellor
  2020-07-12 23:34   ` Sami Tolvanen
  1 sibling, 1 reply; 213+ messages in thread
From: Sedat Dilek @ 2020-07-12  8:59 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers,
	Clang-Built-Linux ML, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86

On Sat, Jul 11, 2020 at 6:32 PM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>
> Dear Sami,
>
>
> Am 24.06.20 um 22:31 schrieb Sami Tolvanen:
> > This patch series adds support for building x86_64 and arm64 kernels
> > with Clang's Link Time Optimization (LTO).
> >
> > In addition to performance, the primary motivation for LTO is to allow
> > Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> > Pixel devices have shipped with LTO+CFI kernels since 2018.
> >
> > Most of the patches are build system changes for handling LLVM bitcode,
> > which Clang produces with LTO instead of ELF object files, postponing
> > ELF processing until a later stage, and ensuring initcall ordering.
> >
> > Note that first objtool patch in the series is already in linux-next,
> > but as it's needed with LTO, I'm including it also here to make testing
> > easier.
>
> […]
>
> Thank you very much for sending these changes.
>
> Do you have a branch, where your current work can be pulled from? Your
> branch on GitHub [1] seems 15 months old.
>

Agreed it's easier to git-pull.
I have seen [1] - not sure if this is the latest version.
Alternatively, you can check patchwork LKML by searching for $submitter.
( You can open patch 01/22 and download the whole patch-series by
following the link "series", see [3]. )

- Sedat -

[1] https://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git/log/?h=lto
[2] https://lore.kernel.org/patchwork/project/lkml/list/?series=&submitter=19676
[3] https://lore.kernel.org/patchwork/series/450026/mbox/

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-12  8:59   ` Sedat Dilek
@ 2020-07-12 18:40     ` Nathan Chancellor
  2020-07-14  9:44       ` Sedat Dilek
  0 siblings, 1 reply; 213+ messages in thread
From: Nathan Chancellor @ 2020-07-12 18:40 UTC (permalink / raw)
  To: Sedat Dilek
  Cc: Paul Menzel, Sami Tolvanen, Masahiro Yamada, Will Deacon,
	Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, Clang-Built-Linux ML, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86

On Sun, Jul 12, 2020 at 10:59:17AM +0200, Sedat Dilek wrote:
> On Sat, Jul 11, 2020 at 6:32 PM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
> >
> > Dear Sami,
> >
> >
> > Am 24.06.20 um 22:31 schrieb Sami Tolvanen:
> > > This patch series adds support for building x86_64 and arm64 kernels
> > > with Clang's Link Time Optimization (LTO).
> > >
> > > In addition to performance, the primary motivation for LTO is to allow
> > > Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> > > Pixel devices have shipped with LTO+CFI kernels since 2018.
> > >
> > > Most of the patches are build system changes for handling LLVM bitcode,
> > > which Clang produces with LTO instead of ELF object files, postponing
> > > ELF processing until a later stage, and ensuring initcall ordering.
> > >
> > > Note that first objtool patch in the series is already in linux-next,
> > > but as it's needed with LTO, I'm including it also here to make testing
> > > easier.
> >
> > […]
> >
> > Thank you very much for sending these changes.
> >
> > Do you have a branch, where your current work can be pulled from? Your
> > branch on GitHub [1] seems 15 months old.
> >
> 
> Agreed it's easier to git-pull.
> I have seen [1] - not sure if this is the latest version.
> Alternatively, you can check patchwork LKML by searching for $submitter.
> ( You can open patch 01/22 and download the whole patch-series by
> following the link "series", see [3]. )
> 
> - Sedat -
> 
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git/log/?h=lto
> [2] https://lore.kernel.org/patchwork/project/lkml/list/?series=&submitter=19676
> [3] https://lore.kernel.org/patchwork/series/450026/mbox/
> 

Sami tagged this series on his GitHub:

https://github.com/samitolvanen/linux/releases/tag/lto-v1

git pull https://github.com/samitolvanen/linux lto-v1

Otherwise, he is updating the clang-cfi branch that includes both the
LTO and CFI patchsets. You can pull that and just turn on
CONFIG_LTO_CLANG.

Lastly, for the future, I would recommend grabbing b4 to easily apply
patches (specifically full series) from lore.kernel.org.

https://git.kernel.org/pub/scm/utils/b4/b4.git/
https://git.kernel.org/pub/scm/utils/b4/b4.git/tree/README.rst

You could grab this series and apply it easily by either downloading the
mbox file and following the instructions it gives for applying the mbox
file:

$ b4 am 20200624203200.78870-1-samitolvanen@google.com

or I prefer piping so that I don't have to clean up later:

$ b4 am -o - 20200624203200.78870-1-samitolvanen@google.com | git am

Cheers,
Nathan

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-11 16:32 ` Paul Menzel
  2020-07-12  8:59   ` Sedat Dilek
@ 2020-07-12 23:34   ` Sami Tolvanen
  2020-07-14 12:16     ` Paul Menzel
  1 sibling, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-07-12 23:34 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML

On Sat, Jul 11, 2020 at 9:32 AM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
> Thank you very much for sending these changes.
>
> Do you have a branch, where your current work can be pulled from? Your
> branch on GitHub [1] seems 15 months old.

The clang-lto branch is rebased regularly on top of Linus' tree.
GitHub just looks at the commit date of the last commit in the tree,
which isn't all that informative.

> Out of curiosity, I applied the changes, allowed the selection for i386
> (x86), and with Clang 1:11~++20200701093119+ffee8040534-1~exp1 from
> Debian experimental, it failed with `Invalid absolute R_386_32
> relocation: KERNEL_PAGES`:

I haven't looked at getting this to work on i386, which is why we only
select ARCH_SUPPORTS_LTO for x86_64. I would expect there to be a few
issues to address.

> >   arch/x86/tools/relocs vmlinux > arch/x86/boot/compressed/vmlinux.relocs;arch/x86/tools/relocs --abs-relocs vmlinux
> > Invalid absolute R_386_32 relocation: KERNEL_PAGES

KERNEL_PAGES looks like a constant, so it's probably safe to ignore
the absolute relocation in tools/relocs.c.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-12 18:40     ` Nathan Chancellor
@ 2020-07-14  9:44       ` Sedat Dilek
  2020-07-14 17:54         ` Nick Desaulniers
  0 siblings, 1 reply; 213+ messages in thread
From: Sedat Dilek @ 2020-07-14  9:44 UTC (permalink / raw)
  To: Nathan Chancellor
  Cc: Paul Menzel, Sami Tolvanen, Masahiro Yamada, Will Deacon,
	Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Nick Desaulniers, Clang-Built-Linux ML, kernel-hardening,
	linux-arch, linux-arm-kernel, linux-kbuild, linux-kernel,
	linux-pci, x86

On Sun, Jul 12, 2020 at 8:40 PM Nathan Chancellor
<natechancellor@gmail.com> wrote:
>
> On Sun, Jul 12, 2020 at 10:59:17AM +0200, Sedat Dilek wrote:
> > On Sat, Jul 11, 2020 at 6:32 PM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
> > >
> > > Dear Sami,
> > >
> > >
> > > Am 24.06.20 um 22:31 schrieb Sami Tolvanen:
> > > > This patch series adds support for building x86_64 and arm64 kernels
> > > > with Clang's Link Time Optimization (LTO).
> > > >
> > > > In addition to performance, the primary motivation for LTO is to allow
> > > > Clang's Control-Flow Integrity (CFI) to be used in the kernel. Google's
> > > > Pixel devices have shipped with LTO+CFI kernels since 2018.
> > > >
> > > > Most of the patches are build system changes for handling LLVM bitcode,
> > > > which Clang produces with LTO instead of ELF object files, postponing
> > > > ELF processing until a later stage, and ensuring initcall ordering.
> > > >
> > > > Note that first objtool patch in the series is already in linux-next,
> > > > but as it's needed with LTO, I'm including it also here to make testing
> > > > easier.
> > >
> > > […]
> > >
> > > Thank you very much for sending these changes.
> > >
> > > Do you have a branch, where your current work can be pulled from? Your
> > > branch on GitHub [1] seems 15 months old.
> > >
> >
> > Agreed it's easier to git-pull.
> > I have seen [1] - not sure if this is the latest version.
> > Alternatively, you can check patchwork LKML by searching for $submitter.
> > ( You can open patch 01/22 and download the whole patch-series by
> > following the link "series", see [3]. )
> >
> > - Sedat -
> >
> > [1] https://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git/log/?h=lto
> > [2] https://lore.kernel.org/patchwork/project/lkml/list/?series=&submitter=19676
> > [3] https://lore.kernel.org/patchwork/series/450026/mbox/
> >
>
> Sami tagged this series on his GitHub:
>
> https://github.com/samitolvanen/linux/releases/tag/lto-v1
>
> git pull https://github.com/samitolvanen/linux lto-v1
>
> Otherwise, he is updating the clang-cfi branch that includes both the
> LTO and CFI patchsets. You can pull that and just turn on
> CONFIG_LTO_CLANG.
>
> Lastly, for the future, I would recommend grabbing b4 to easily apply
> patches (specifically full series) from lore.kernel.org.
>
> https://git.kernel.org/pub/scm/utils/b4/b4.git/
> https://git.kernel.org/pub/scm/utils/b4/b4.git/tree/README.rst
>
> You could grab this series and apply it easily by either downloading the
> mbox file and following the instructions it gives for applying the mbox
> file:
>
> $ b4 am 20200624203200.78870-1-samitolvanen@google.com
>
> or I prefer piping so that I don't have to clean up later:
>
> $ b4 am -o - 20200624203200.78870-1-samitolvanen@google.com | git am
>

It is always a pleasure to read your replies and enrich my know-how
beyond Linux-kernel hacking :-).

Thanks for the tip with "b4" tool.
Might add this to our ClangBuiltLinux wiki "Command line tips and tricks"?

- Sedat -

[1] https://github.com/ClangBuiltLinux/linux/wiki/Command-line-tips-and-tricks

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-12 23:34   ` Sami Tolvanen
@ 2020-07-14 12:16     ` Paul Menzel
  2020-07-14 12:35       ` Sedat Dilek
  0 siblings, 1 reply; 213+ messages in thread
From: Paul Menzel @ 2020-07-14 12:16 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, x86

Dear Sami,


Am 13.07.20 um 01:34 schrieb Sami Tolvanen:
> On Sat, Jul 11, 2020 at 9:32 AM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>> Thank you very much for sending these changes.
>>
>> Do you have a branch, where your current work can be pulled from? Your
>> branch on GitHub [1] seems 15 months old.
> 
> The clang-lto branch is rebased regularly on top of Linus' tree.
> GitHub just looks at the commit date of the last commit in the tree,
> which isn't all that informative.

Thank you for clearing this up, and sorry for not checking myself.

>> Out of curiosity, I applied the changes, allowed the selection for i386
>> (x86), and with Clang 1:11~++20200701093119+ffee8040534-1~exp1 from
>> Debian experimental, it failed with `Invalid absolute R_386_32
>> relocation: KERNEL_PAGES`:
> 
> I haven't looked at getting this to work on i386, which is why we only
> select ARCH_SUPPORTS_LTO for x86_64. I would expect there to be a few
> issues to address.
> 
>>>    arch/x86/tools/relocs vmlinux > arch/x86/boot/compressed/vmlinux.relocs;arch/x86/tools/relocs --abs-relocs vmlinux
>>> Invalid absolute R_386_32 relocation: KERNEL_PAGES
> 
> KERNEL_PAGES looks like a constant, so it's probably safe to ignore
> the absolute relocation in tools/relocs.c.

Thank you for pointing me to the right direction. I am happy to report, 
that with the diff below (no idea to what list to add the string), Linux 
5.8-rc5 with the LLVM/Clang/LTO patches on top, builds and boots on the 
ASRock E350M1.

```
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index 8f3bf34840cef..e91af127ed3c0 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -79,6 +79,7 @@ static const char * const 
sym_regex_kernel[S_NSYMTYPES] = {
         "__end_rodata_hpage_align|"
  #endif
         "__vvar_page|"
+       "KERNEL_PAGES|"
         "_end)$"
  };
```


Kind regards,

Paul

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-14 12:16     ` Paul Menzel
@ 2020-07-14 12:35       ` Sedat Dilek
  2020-07-14 13:40         ` Paul Menzel
  0 siblings, 1 reply; 213+ messages in thread
From: Sedat Dilek @ 2020-07-14 12:35 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers,
	Clang-Built-Linux ML, Kernel Hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, LKML, linux-pci, x86

On Tue, Jul 14, 2020 at 2:16 PM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>
> Dear Sami,
>
>
> Am 13.07.20 um 01:34 schrieb Sami Tolvanen:
> > On Sat, Jul 11, 2020 at 9:32 AM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
> >> Thank you very much for sending these changes.
> >>
> >> Do you have a branch, where your current work can be pulled from? Your
> >> branch on GitHub [1] seems 15 months old.
> >
> > The clang-lto branch is rebased regularly on top of Linus' tree.
> > GitHub just looks at the commit date of the last commit in the tree,
> > which isn't all that informative.
>
> Thank you for clearing this up, and sorry for not checking myself.
>
> >> Out of curiosity, I applied the changes, allowed the selection for i386
> >> (x86), and with Clang 1:11~++20200701093119+ffee8040534-1~exp1 from
> >> Debian experimental, it failed with `Invalid absolute R_386_32
> >> relocation: KERNEL_PAGES`:
> >
> > I haven't looked at getting this to work on i386, which is why we only
> > select ARCH_SUPPORTS_LTO for x86_64. I would expect there to be a few
> > issues to address.
> >
> >>>    arch/x86/tools/relocs vmlinux > arch/x86/boot/compressed/vmlinux.relocs;arch/x86/tools/relocs --abs-relocs vmlinux
> >>> Invalid absolute R_386_32 relocation: KERNEL_PAGES
> >
> > KERNEL_PAGES looks like a constant, so it's probably safe to ignore
> > the absolute relocation in tools/relocs.c.
>
> Thank you for pointing me to the right direction. I am happy to report,
> that with the diff below (no idea to what list to add the string), Linux
> 5.8-rc5 with the LLVM/Clang/LTO patches on top, builds and boots on the
> ASRock E350M1.
>
> ```
> diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
> index 8f3bf34840cef..e91af127ed3c0 100644
> --- a/arch/x86/tools/relocs.c
> +++ b/arch/x86/tools/relocs.c
> @@ -79,6 +79,7 @@ static const char * const
> sym_regex_kernel[S_NSYMTYPES] = {
>          "__end_rodata_hpage_align|"
>   #endif
>          "__vvar_page|"
> +       "KERNEL_PAGES|"
>          "_end)$"
>   };
> ```
>

What llvm-toolchain and version did you use?

Can you post your linux-config?

Thanks.

- Sedat -

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-14 12:35       ` Sedat Dilek
@ 2020-07-14 13:40         ` Paul Menzel
  0 siblings, 0 replies; 213+ messages in thread
From: Paul Menzel @ 2020-07-14 13:40 UTC (permalink / raw)
  To: Sedat Dilek
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers,
	Clang-Built-Linux ML, Kernel Hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, LKML, linux-pci, x86


[-- Attachment #1: Type: text/plain, Size: 2556 bytes --]

Dear Sedat,


Am 14.07.20 um 14:35 schrieb Sedat Dilek:
> On Tue, Jul 14, 2020 at 2:16 PM Paul Menzel <pmenzel@molgen.mpg.de> wrote:

>> Am 13.07.20 um 01:34 schrieb Sami Tolvanen:
>>> On Sat, Jul 11, 2020 at 9:32 AM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>>>> Thank you very much for sending these changes.
>>>>
>>>> Do you have a branch, where your current work can be pulled from? Your
>>>> branch on GitHub [1] seems 15 months old.
>>>
>>> The clang-lto branch is rebased regularly on top of Linus' tree.
>>> GitHub just looks at the commit date of the last commit in the tree,
>>> which isn't all that informative.
>>
>> Thank you for clearing this up, and sorry for not checking myself.
>>
>>>> Out of curiosity, I applied the changes, allowed the selection for i386
>>>> (x86), and with Clang 1:11~++20200701093119+ffee8040534-1~exp1 from
>>>> Debian experimental, it failed with `Invalid absolute R_386_32
>>>> relocation: KERNEL_PAGES`:
>>>
>>> I haven't looked at getting this to work on i386, which is why we only
>>> select ARCH_SUPPORTS_LTO for x86_64. I would expect there to be a few
>>> issues to address.
>>>
>>>>>     arch/x86/tools/relocs vmlinux > arch/x86/boot/compressed/vmlinux.relocs;arch/x86/tools/relocs --abs-relocs vmlinux
>>>>> Invalid absolute R_386_32 relocation: KERNEL_PAGES
>>>
>>> KERNEL_PAGES looks like a constant, so it's probably safe to ignore
>>> the absolute relocation in tools/relocs.c.
>>
>> Thank you for pointing me to the right direction. I am happy to report,
>> that with the diff below (no idea to what list to add the string), Linux
>> 5.8-rc5 with the LLVM/Clang/LTO patches on top, builds and boots on the
>> ASRock E350M1.
>>
>> ```
>> diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
>> index 8f3bf34840cef..e91af127ed3c0 100644
>> --- a/arch/x86/tools/relocs.c
>> +++ b/arch/x86/tools/relocs.c
>> @@ -79,6 +79,7 @@ static const char * const
>> sym_regex_kernel[S_NSYMTYPES] = {
>>           "__end_rodata_hpage_align|"
>>    #endif
>>           "__vvar_page|"
>> +       "KERNEL_PAGES|"
>>           "_end)$"
>>    };
>> ```
> 
> What llvm-toolchain and version did you use?

See above. ;-) Clang 1:11~++20200701093119+ffee8040534-1~exp1 from 
Debian experimental and the build command below.

     make bindeb-pkg -j32 ARCH=i386 LLVM=1

> Can you post your linux-config?

Sure. Attached.

     $ grep _LTO config-5.8.0-rc5-00107-g5b634a79fc2fa
     CONFIG_LTO=y
     CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
     # CONFIG_LTO_NONE is not set
     CONFIG_LTO_CLANG=y


Kind regards,

Paul

[-- Attachment #2: config-5.8.0-rc5-00107-g5b634a79fc2fa --]
[-- Type: text/plain, Size: 142605 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 5.8.0-rc5 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="Debian clang version 11.0.0-++20200701093119+ffee8040534-1~exp1 "
CONFIG_GCC_VERSION=0
CONFIG_LD_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_LD_IS_LLD=y
CONFIG_CLANG_VERSION=110000
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
# CONFIG_SCHED_THERMAL_PRESSURE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_X86_32=y
CONFIG_FORCE_DYNAMIC_FTRACE=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_M486SX is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_CYRIX_32 is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_HYGON is not set
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
# CONFIG_CPU_SUP_ZHAOXIN is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=8
CONFIG_NR_CPUS_DEFAULT=8
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=m
# end of Performance monitoring

# CONFIG_X86_LEGACY_VM86 is not set
CONFIG_X86_IOPL_IOPERM=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
# end of Processor type and features

CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_SPCR_TABLE is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
CONFIG_ACPI_EC_DEBUGFS=m
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
CONFIG_DPTF_POWER=m
CONFIG_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=m
CONFIG_X86_PM_TIMER=y
# CONFIG_SFI is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle

# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_COMPAT_32=y
# end of Binary Emulations

CONFIG_HAVE_ATOMIC_IOMAP=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_SMI is not set
CONFIG_GOOGLE_COREBOOT_TABLE=m
CONFIG_GOOGLE_MEMCONSOLE=m
# CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY is not set
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m
# CONFIG_GOOGLE_VPD is not set
CONFIG_EFI_EARLYCON=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_THINLTO=y
CONFIG_THINLTO=y
# CONFIG_LTO_NONE is not set
CONFIG_LTO_CLANG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZSWAP is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
CONFIG_INET_DIAG_DESTROY=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_FOU=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
CONFIG_NFT_COUNTER=m
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not set
CONFIG_NFT_QUEUE=m
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
# CONFIG_NETFILTER_XT_TARGET_MASQUERADE is not set
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
CONFIG_NF_TPROXY_IPV4=m
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=m
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_TPROXY_IPV6=m
# CONFIG_NF_TABLES_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
# CONFIG_NF_TABLES_BRIDGE is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking

CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=m
# CONFIG_NET_DSA_TAG_AR9331 is not set
CONFIG_NET_DSA_TAG_BRCM_COMMON=m
CONFIG_NET_DSA_TAG_BRCM=m
CONFIG_NET_DSA_TAG_BRCM_PREPEND=m
# CONFIG_NET_DSA_TAG_GSWIP is not set
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
# CONFIG_NET_DSA_TAG_MTK is not set
# CONFIG_NET_DSA_TAG_KSZ is not set
# CONFIG_NET_DSA_TAG_OCELOT is not set
# CONFIG_NET_DSA_TAG_QCA is not set
# CONFIG_NET_DSA_TAG_LAN9303 is not set
# CONFIG_NET_DSA_TAG_SJA1105 is not set
CONFIG_NET_DSA_TAG_TRAILER=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
# CONFIG_NET_ACT_CTINFO is not set
# CONFIG_NET_ACT_SKBMOD is not set
CONFIG_NET_ACT_IFE=m
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
# CONFIG_NET_IFE_SKBTCINDEX is not set
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=m
# CONFIG_VSOCKETS_DIAG is not set
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_DEVLINK=y
# CONFIG_FAILOVER is not set
CONFIG_ETHTOOL_NETLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_BW is not set
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE="radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/SUMO_rlc.bin radeon/SUMO_uvd.bin radeon/ARUBA_pfp.bin radeon/ARUBA_me.bin radeon/ARUBA_rlc.bin radeon/TAHITI_uvd.bin radeon/TAHITI_vce.bin radeon/TAHITI_rlc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices

CONFIG_CONNECTOR=m
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC & related support
#
# CONFIG_VOP_BUS is not set
# end of Intel MIC & related support

# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# end of Misc devices

CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
# CONFIG_DM_INIT is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# end of IEEE 1394 (FireWire) support

# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# Distributed Switch Architecture drivers
#
CONFIG_B53=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
# CONFIG_B53_SERDES is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
# CONFIG_NET_DSA_LOOP is not set
# CONFIG_NET_DSA_LANTIQ_GSWIP is not set
# CONFIG_NET_DSA_MT7530 is not set
CONFIG_NET_DSA_MV88E6060=m
# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set
# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
# CONFIG_NET_DSA_AR9331 is not set
# CONFIG_NET_DSA_QCA8K is not set
# CONFIG_NET_DSA_REALTEK_SMI is not set
# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
# CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM is not set
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_E1000E_HWTS=y
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
CONFIG_IAVF=m
CONFIG_I40EVF=m
# CONFIG_ICE is not set
CONFIG_FM10K=m
# CONFIG_IGC is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_MSCC_OCELOT_SWITCH is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_XPCS is not set
CONFIG_PHYLINK=m
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_SFP is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
CONFIG_BCM7XXX_PHY=m
# CONFIG_BCM87XX_PHY is not set
CONFIG_BCM_NET_PHYLIB=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
CONFIG_INTEL_XWAY_PHY=m
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_LXT_PHY=m
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_MICROCHIP_PHY=m
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=m
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
CONFIG_PPP=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOE is not set
# CONFIG_PPTP is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F54 is not set
# CONFIG_RMI4_F55 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
CONFIG_NVRAM=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_DEVPORT=y
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=m
CONFIG_TCG_TIS=m
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_CRB=m
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# end of Character devices

CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
# CONFIG_PTP_1588_CLOCK_PCH is not set
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_PINCTRL_TIGERLAKE is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# USB GPIO expanders
#
# end of USB GPIO expanders

# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_AMD_ENERGY=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=m
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_DVB_CORE=m
# end of Media core support

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# end of Video4Linux options

#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_DTCS033 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
CONFIG_USB_GSPCA_SPCA561=m
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STK1135 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TOUPTEK is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_CX231XX is not set

#
# Digital TV USB devices
#
# CONFIG_DVB_USB_V2 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_USB_DRV is not set
# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set

#
# Software defined radio USB devices
#
# CONFIG_USB_AIRSPY is not set
# CONFIG_USB_HACKRF is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips

#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_ST_MIPID02 is not set
# end of Miscellaneous helper chips

#
# Camera sensor devices
#
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_OV2640 is not set
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV2740 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_SMIAPP is not set
# CONFIG_VIDEO_ET8EK8 is not set
# end of Camera sensor devices

#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices

#
# SPI helper chips
#
# end of SPI helper chips

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2063 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
# CONFIG_MEDIA_TUNER_FC0013 is not set
# CONFIG_MEDIA_TUNER_TDA18212 is not set
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
# CONFIG_MEDIA_TUNER_SI2157 is not set
# CONFIG_MEDIA_TUNER_IT913X is not set
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
# CONFIG_DVB_STV090x is not set
# CONFIG_DVB_STV0910 is not set
# CONFIG_DVB_STV6110x is not set
# CONFIG_DVB_STV6111 is not set
# CONFIG_DVB_MXL5XX is not set
# CONFIG_DVB_M88DS3103 is not set

#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
# CONFIG_DVB_TDA18271C2DD is not set
# CONFIG_DVB_SI2165 is not set
# CONFIG_DVB_MN88472 is not set
# CONFIG_DVB_MN88473 is not set

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_ZL10036 is not set
# CONFIG_DVB_ZL10039 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_STV6110 is not set
# CONFIG_DVB_STV0900 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_CX24117 is not set
# CONFIG_DVB_CX24120 is not set
# CONFIG_DVB_SI21XX is not set
# CONFIG_DVB_TS2020 is not set
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set
# CONFIG_DVB_TDA10071 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_S5H1432 is not set
# CONFIG_DVB_DRXD is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
# CONFIG_DVB_DIB9000 is not set
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_AF9013 is not set
# CONFIG_DVB_EC100 is not set
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set
# CONFIG_DVB_CXD2841ER is not set
# CONFIG_DVB_RTL2830 is not set
# CONFIG_DVB_RTL2832 is not set
# CONFIG_DVB_RTL2832_SDR is not set
# CONFIG_DVB_SI2168 is not set
# CONFIG_DVB_ZD1301_DEMOD is not set

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_LGDT3306A is not set
# CONFIG_DVB_LG2160 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522_DTV is not set
# CONFIG_DVB_AU8522_V4L is not set
# CONFIG_DVB_S5H1411 is not set

#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
# CONFIG_DVB_DIB8000 is not set
# CONFIG_DVB_MB86A20S is not set

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_TC90522 is not set
# CONFIG_DVB_MN88443X is not set

#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set

#
# SEC control devices for DVB-S
#
# CONFIG_DVB_DRX39XYJ is not set
# CONFIG_DVB_LNBH25 is not set
# CONFIG_DVB_LNBH29 is not set
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_LNBP22 is not set
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_ISL6423 is not set
# CONFIG_DVB_A8293 is not set
# CONFIG_DVB_LGS8GL5 is not set
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_ATBM8830 is not set
# CONFIG_DVB_TDA665x is not set
# CONFIG_DVB_IX2505V is not set
# CONFIG_DVB_M88RS2000 is not set
# CONFIG_DVB_AF9033 is not set
# CONFIG_DVB_HORUS3A is not set
# CONFIG_DVB_ASCOT2E is not set
# CONFIG_DVB_HELENE is not set

#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
# CONFIG_DVB_SP2 is not set
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_SCHED=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=m
# CONFIG_DRM_AMDGPU_SI is not set
# CONFIG_DRM_AMDGPU_CIK is not set
# CONFIG_DRM_AMDGPU_USERPTR is not set
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_AMD_ACP is not set
# end of ACP (Audio CoProcessor) Configuration

#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_DCN=y
# CONFIG_DRM_AMD_DC_HDCP is not set
# CONFIG_DEBUG_KERNEL_DC is not set
# end of Display Engine Configuration

# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_ANALOGIX_DP=m
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

# CONFIG_LOGO is not set
# end of Graphics support

CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# end of HD-Audio

CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
# CONFIG_SND_USB is not set
# CONFIG_SND_FIREWIRE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SND_X86 is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=m
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
CONFIG_HID_WACOM=m
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID=m
# end of I2C HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
CONFIG_USB_ULPI_BUS=m
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=m
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS3 is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
# CONFIG_TYPEC_TCPCI is not set
# CONFIG_TYPEC_FUSB302 is not set
CONFIG_TYPEC_UCSI=m
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=m
# CONFIG_TYPEC_HD3SS3220 is not set
# CONFIG_TYPEC_TPS6598X is not set

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers

CONFIG_USB_ROLE_SWITCH=m
# CONFIG_USB_ROLES_INTEL_XHCI is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
# CONFIG_LEDS_AS3645A is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
# CONFIG_LEDS_SGM3140 is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_PCH_DMA is not set
# CONFIG_PLX_DMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_VSOCK is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
# CONFIG_PMC_ATOM is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_INTEL_IOMMU is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_INTEL_INT3496 is not set
# CONFIG_EXTCON_MAX3355 is not set
# CONFIG_EXTCON_PTN5150 is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_USB_HS is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_TUSB1210 is not set
# CONFIG_PHY_INTEL_EMMC is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID is not set
# end of Android

CONFIG_DAX=y
# CONFIG_DEV_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
# CONFIG_EROFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_CURVE25519 is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
# CONFIG_CRYPTO_XXHASH is not set
# CONFIG_CRYPTO_BLAKE2B is not set
# CONFIG_CRYPTO_BLAKE2S is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
# CONFIG_DMA_CMA is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN_STACK=0
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_MMIOTRACE=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_KCSAN_COMPILER=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y

#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# CONFIG_UNWINDER_GUESS is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 00/22] add support for Clang LTO
  2020-07-14  9:44       ` Sedat Dilek
@ 2020-07-14 17:54         ` Nick Desaulniers
  0 siblings, 0 replies; 213+ messages in thread
From: Nick Desaulniers @ 2020-07-14 17:54 UTC (permalink / raw)
  To: Sedat Dilek
  Cc: Nathan Chancellor, Paul Menzel, Sami Tolvanen, Masahiro Yamada,
	Will Deacon, Greg Kroah-Hartman, Paul E. McKenney, Kees Cook,
	Clang-Built-Linux ML, Kernel Hardening, linux-arch, Linux ARM,
	Linux Kbuild mailing list, LKML, linux-pci,
	maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)

On Tue, Jul 14, 2020 at 2:44 AM Sedat Dilek <sedat.dilek@gmail.com> wrote:
>
> On Sun, Jul 12, 2020 at 8:40 PM Nathan Chancellor
> <natechancellor@gmail.com> wrote:
> >
> > Lastly, for the future, I would recommend grabbing b4 to easily apply
> > patches (specifically full series) from lore.kernel.org.
> >
> > https://git.kernel.org/pub/scm/utils/b4/b4.git/
> > https://git.kernel.org/pub/scm/utils/b4/b4.git/tree/README.rst
> >
> > You could grab this series and apply it easily by either downloading the
> > mbox file and following the instructions it gives for applying the mbox
> > file:
> >
> > $ b4 am 20200624203200.78870-1-samitolvanen@google.com
> >
> > or I prefer piping so that I don't have to clean up later:
> >
> > $ b4 am -o - 20200624203200.78870-1-samitolvanen@google.com | git am
> >
>
> It is always a pleasure to read your replies and enrich my know-how
> beyond Linux-kernel hacking :-).
>
> Thanks for the tip with "b4" tool.
> Might add this to our ClangBuiltLinux wiki "Command line tips and tricks"?
>
> - Sedat -
>
> [1] https://github.com/ClangBuiltLinux/linux/wiki/Command-line-tips-and-tricks

Good idea, done.

-- 
Thanks,
~Nick Desaulniers

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-06-26 11:29               ` Peter Zijlstra
  2020-06-26 11:42                 ` Peter Zijlstra
@ 2020-07-17 17:28                 ` Sami Tolvanen
  2020-07-17 17:36                   ` Steven Rostedt
  2020-07-22 17:55                 ` Steven Rostedt
  2 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-07-17 17:28 UTC (permalink / raw)
  To: Steven Rostedt, Peter Zijlstra
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML, Josh Poimboeuf, Matt Helsley

On Fri, Jun 26, 2020 at 4:29 AM Peter Zijlstra <peterz@infradead.org> wrote:
>
> On Thu, Jun 25, 2020 at 03:40:42PM -0700, Sami Tolvanen wrote:
>
> > > Not boot tested, but it generates the required sections and they look
> > > more or less as expected, ymmv.
>
> > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> > > index a291823f3f26..189575c12434 100644
> > > --- a/arch/x86/Kconfig
> > > +++ b/arch/x86/Kconfig
> > > @@ -174,7 +174,6 @@ config X86
> > >     select HAVE_EXIT_THREAD
> > >     select HAVE_FAST_GUP
> > >     select HAVE_FENTRY                      if X86_64 || DYNAMIC_FTRACE
> > > -   select HAVE_FTRACE_MCOUNT_RECORD
> > >     select HAVE_FUNCTION_GRAPH_TRACER
> > >     select HAVE_FUNCTION_TRACER
> > >     select HAVE_GCC_PLUGINS
> >
> > This breaks DYNAMIC_FTRACE according to kernel/trace/ftrace.c:
> >
> >   #ifndef CONFIG_FTRACE_MCOUNT_RECORD
> >   # error Dynamic ftrace depends on MCOUNT_RECORD
> >   #endif
> >
> > And the build errors after that seem to confirm this. It looks like we might
> > need another flag to skip recordmcount.
>
> Hurm, Steve, how you want to do that?

Steven, did you have any thoughts about this? Moving recordmcount to
an objtool pass that knows about call sites feels like a much cleaner
solution than annotating kernel code to avoid unwanted relocations.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-17 17:28                 ` Sami Tolvanen
@ 2020-07-17 17:36                   ` Steven Rostedt
  2020-07-17 17:47                     ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Steven Rostedt @ 2020-07-17 17:36 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Peter Zijlstra, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML, Josh Poimboeuf, Matt Helsley

On Fri, 17 Jul 2020 10:28:13 -0700
Sami Tolvanen <samitolvanen@google.com> wrote:

> On Fri, Jun 26, 2020 at 4:29 AM Peter Zijlstra <peterz@infradead.org> wrote:
> >
> > On Thu, Jun 25, 2020 at 03:40:42PM -0700, Sami Tolvanen wrote:
> >  
> > > > Not boot tested, but it generates the required sections and they look
> > > > more or less as expected, ymmv.  
> >  
> > > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> > > > index a291823f3f26..189575c12434 100644
> > > > --- a/arch/x86/Kconfig
> > > > +++ b/arch/x86/Kconfig
> > > > @@ -174,7 +174,6 @@ config X86
> > > >     select HAVE_EXIT_THREAD
> > > >     select HAVE_FAST_GUP
> > > >     select HAVE_FENTRY                      if X86_64 || DYNAMIC_FTRACE
> > > > -   select HAVE_FTRACE_MCOUNT_RECORD
> > > >     select HAVE_FUNCTION_GRAPH_TRACER
> > > >     select HAVE_FUNCTION_TRACER
> > > >     select HAVE_GCC_PLUGINS  
> > >
> > > This breaks DYNAMIC_FTRACE according to kernel/trace/ftrace.c:
> > >
> > >   #ifndef CONFIG_FTRACE_MCOUNT_RECORD
> > >   # error Dynamic ftrace depends on MCOUNT_RECORD
> > >   #endif
> > >
> > > And the build errors after that seem to confirm this. It looks like we might
> > > need another flag to skip recordmcount.  
> >
> > Hurm, Steve, how you want to do that?  
> 
> Steven, did you have any thoughts about this? Moving recordmcount to
> an objtool pass that knows about call sites feels like a much cleaner
> solution than annotating kernel code to avoid unwanted relocations.
> 

Bah, I started to reply to this then went to look for details, got
distracted, forgot about it, my laptop crashed (due to a zoom call),
and I lost the email I was writing (haven't looked in the drafts
folder, but my idea about this has changed since anyway).

So the problem is that we process mcount references in other areas and
that confuses the ftrace modification portion?

Someone just submitted a patch for arm64 for this:

https://lore.kernel.org/r/20200717143338.19302-1-gregory.herrero@oracle.com

Is that what you want?

-- Steve

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-17 17:36                   ` Steven Rostedt
@ 2020-07-17 17:47                     ` Sami Tolvanen
  2020-07-17 18:05                       ` Steven Rostedt
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-07-17 17:47 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Peter Zijlstra, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML, Josh Poimboeuf, Matt Helsley

On Fri, Jul 17, 2020 at 10:36 AM Steven Rostedt <rostedt@goodmis.org> wrote:
>
> On Fri, 17 Jul 2020 10:28:13 -0700
> Sami Tolvanen <samitolvanen@google.com> wrote:
>
> > On Fri, Jun 26, 2020 at 4:29 AM Peter Zijlstra <peterz@infradead.org> wrote:
> > >
> > > On Thu, Jun 25, 2020 at 03:40:42PM -0700, Sami Tolvanen wrote:
> > >
> > > > > Not boot tested, but it generates the required sections and they look
> > > > > more or less as expected, ymmv.
> > >
> > > > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> > > > > index a291823f3f26..189575c12434 100644
> > > > > --- a/arch/x86/Kconfig
> > > > > +++ b/arch/x86/Kconfig
> > > > > @@ -174,7 +174,6 @@ config X86
> > > > >     select HAVE_EXIT_THREAD
> > > > >     select HAVE_FAST_GUP
> > > > >     select HAVE_FENTRY                      if X86_64 || DYNAMIC_FTRACE
> > > > > -   select HAVE_FTRACE_MCOUNT_RECORD
> > > > >     select HAVE_FUNCTION_GRAPH_TRACER
> > > > >     select HAVE_FUNCTION_TRACER
> > > > >     select HAVE_GCC_PLUGINS
> > > >
> > > > This breaks DYNAMIC_FTRACE according to kernel/trace/ftrace.c:
> > > >
> > > >   #ifndef CONFIG_FTRACE_MCOUNT_RECORD
> > > >   # error Dynamic ftrace depends on MCOUNT_RECORD
> > > >   #endif
> > > >
> > > > And the build errors after that seem to confirm this. It looks like we might
> > > > need another flag to skip recordmcount.
> > >
> > > Hurm, Steve, how you want to do that?
> >
> > Steven, did you have any thoughts about this? Moving recordmcount to
> > an objtool pass that knows about call sites feels like a much cleaner
> > solution than annotating kernel code to avoid unwanted relocations.
> >
>
> Bah, I started to reply to this then went to look for details, got
> distracted, forgot about it, my laptop crashed (due to a zoom call),
> and I lost the email I was writing (haven't looked in the drafts
> folder, but my idea about this has changed since anyway).
>
> So the problem is that we process mcount references in other areas and
> that confuses the ftrace modification portion?

Correct.

> Someone just submitted a patch for arm64 for this:
>
> https://lore.kernel.org/r/20200717143338.19302-1-gregory.herrero@oracle.com
>
> Is that what you want?

That looks like the same issue, but we need to fix this on x86 instead.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-17 17:47                     ` Sami Tolvanen
@ 2020-07-17 18:05                       ` Steven Rostedt
  2020-07-20 16:52                         ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Steven Rostedt @ 2020-07-17 18:05 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Peter Zijlstra, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML, Josh Poimboeuf, Matt Helsley

On Fri, 17 Jul 2020 10:47:51 -0700
Sami Tolvanen <samitolvanen@google.com> wrote:

> > Someone just submitted a patch for arm64 for this:
> >
> > https://lore.kernel.org/r/20200717143338.19302-1-gregory.herrero@oracle.com
> >
> > Is that what you want?  
> 
> That looks like the same issue, but we need to fix this on x86 instead.

Does x86 have a way to differentiate between the two that record mcount
can check?

-- Steve

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 11/22] pci: lto: fix PREL32 relocations
  2020-06-24 20:31 ` [PATCH 11/22] pci: " Sami Tolvanen
  2020-06-24 22:49   ` kernel test robot
@ 2020-07-17 20:26   ` Bjorn Helgaas
  2020-07-22 18:15     ` Sami Tolvanen
  1 sibling, 1 reply; 213+ messages in thread
From: Bjorn Helgaas @ 2020-07-17 20:26 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86

OK by me, but please update the subject to match convention:

  PCI: Fix PREL32 relocations for LTO

and include a hint in the commit log about what LTO is.  At least
expand the initialism once.  Googling for "LTO" isn't very useful.

  With Clang's Link Time Optimization (LTO), the compiler ... ?

On Wed, Jun 24, 2020 at 01:31:49PM -0700, Sami Tolvanen wrote:
> With LTO, the compiler can rename static functions to avoid global
> naming collisions. As PCI fixup functions are typically static,
> renaming can break references to them in inline assembly. This
> change adds a global stub to DECLARE_PCI_FIXUP_SECTION to fix the
> issue when PREL32 relocations are used.
> 
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> ---
>  include/linux/pci.h | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index c79d83304e52..1e65e16f165a 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1909,19 +1909,24 @@ enum pci_fixup_pass {
>  };
>  
>  #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
> -#define __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
> -				    class_shift, hook)			\
> -	__ADDRESSABLE(hook)						\
> +#define ___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
> +				    class_shift, hook, stub)		\
> +	void stub(struct pci_dev *dev) { hook(dev); }			\
>  	asm(".section "	#sec ", \"a\"				\n"	\
>  	    ".balign	16					\n"	\
>  	    ".short "	#vendor ", " #device "			\n"	\
>  	    ".long "	#class ", " #class_shift "		\n"	\
> -	    ".long "	#hook " - .				\n"	\
> +	    ".long "	#stub " - .				\n"	\
>  	    ".previous						\n");
> +
> +#define __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
> +				  class_shift, hook, stub)		\
> +	___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
> +				  class_shift, hook, stub)
>  #define DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
>  				  class_shift, hook)			\
>  	__DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
> -				  class_shift, hook)
> +				  class_shift, hook, __UNIQUE_ID(hook))
>  #else
>  /* Anonymous variables would be nice... */
>  #define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class,	\
> -- 
> 2.27.0.212.ge8ba1cc988-goog
> 

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-17 18:05                       ` Steven Rostedt
@ 2020-07-20 16:52                         ` Sami Tolvanen
  2020-07-22 17:58                           ` Steven Rostedt
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-07-20 16:52 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Peter Zijlstra, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML, Josh Poimboeuf, Matt Helsley

On Fri, Jul 17, 2020 at 11:05 AM Steven Rostedt <rostedt@goodmis.org> wrote:
>
> On Fri, 17 Jul 2020 10:47:51 -0700
> Sami Tolvanen <samitolvanen@google.com> wrote:
>
> > > Someone just submitted a patch for arm64 for this:
> > >
> > > https://lore.kernel.org/r/20200717143338.19302-1-gregory.herrero@oracle.com
> > >
> > > Is that what you want?
> >
> > That looks like the same issue, but we need to fix this on x86 instead.
>
> Does x86 have a way to differentiate between the two that record mcount
> can check?

I'm not sure if looking at the relocation alone is sufficient on x86,
we might also have to decode the instruction, which is what objtool
does. Did you have any thoughts on Peter's patch, or my initial
suggestion, which adds a __nomcount attribute to affected functions?

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-06-26 11:29               ` Peter Zijlstra
  2020-06-26 11:42                 ` Peter Zijlstra
  2020-07-17 17:28                 ` Sami Tolvanen
@ 2020-07-22 17:55                 ` Steven Rostedt
  2020-07-22 18:41                   ` Peter Zijlstra
  2 siblings, 1 reply; 213+ messages in thread
From: Steven Rostedt @ 2020-07-22 17:55 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf, mhelsley

On Fri, 26 Jun 2020 13:29:31 +0200
Peter Zijlstra <peterz@infradead.org> wrote:

> On Thu, Jun 25, 2020 at 03:40:42PM -0700, Sami Tolvanen wrote:
> 
> > > Not boot tested, but it generates the required sections and they look
> > > more or less as expected, ymmv.  
> 
> > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> > > index a291823f3f26..189575c12434 100644
> > > --- a/arch/x86/Kconfig
> > > +++ b/arch/x86/Kconfig
> > > @@ -174,7 +174,6 @@ config X86
> > >  	select HAVE_EXIT_THREAD
> > >  	select HAVE_FAST_GUP
> > >  	select HAVE_FENTRY			if X86_64 || DYNAMIC_FTRACE
> > > -	select HAVE_FTRACE_MCOUNT_RECORD
> > >  	select HAVE_FUNCTION_GRAPH_TRACER
> > >  	select HAVE_FUNCTION_TRACER
> > >  	select HAVE_GCC_PLUGINS  
> > 
> > This breaks DYNAMIC_FTRACE according to kernel/trace/ftrace.c:
> > 
> >   #ifndef CONFIG_FTRACE_MCOUNT_RECORD
> >   # error Dynamic ftrace depends on MCOUNT_RECORD
> >   #endif
> > 
> > And the build errors after that seem to confirm this. It looks like we might
> > need another flag to skip recordmcount.  
> 
> Hurm, Steve, how you want to do that?

That was added when we removed that dangerous daemon that did the
updates, and was added to make sure it didn't come back.

We can probably just get rid of it.


> 
> > Anyway, since objtool is run before recordmcount, I just left this unchanged
> > for testing and ignored the recordmcount warnings about __mcount_loc already
> > existing. Something is a bit off still though, I see this at boot:
> > 
> >   ------------[ ftrace bug ]------------
> >   ftrace failed to modify
> >   [<ffffffff81000660>] __tracepoint_iter_initcall_level+0x0/0x40
> >    actual:   0f:1f:44:00:00
> >   Initializing ftrace call sites
> >   ftrace record flags: 0
> >    (0)
> >    expected tramp: ffffffff81056500
> >   ------------[ cut here ]------------
> > 
> > Otherwise, this looks pretty good.  
> 
> Ha! it is trying to convert the "CALL __fentry__" into a NOP and not
> finding the CALL -- because objtool already made it a NOP...
> 
> Weird, I thought recordmcount would also write NOPs, it certainly has
> code for that. I suppose we can use CC_USING_NOP_MCOUNT to avoid those,
> but I'd rather Steve explain this before I wreck things further.

The reason for not having recordmcount insert all the nops, is because
x86 has more than one optimal nop which is determined by the machine it
runs on, and not at compile time. So we figured just updated it then.

We can change it to be a nop on boot, and just modify it if it's not
the optimal nop already. 

That said, Andi Kleen added an option to gcc called -mnop-mcount which
will have gcc do both create the mcount section and convert the calls
into nops. When doing so, it defines CC_USING_NOP_MCOUNT which will
tell ftrace to expect the calls to already be converted.

-- Steve

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-20 16:52                         ` Sami Tolvanen
@ 2020-07-22 17:58                           ` Steven Rostedt
  2020-07-22 18:07                             ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Steven Rostedt @ 2020-07-22 17:58 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Peter Zijlstra, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML, Josh Poimboeuf

On Mon, 20 Jul 2020 09:52:37 -0700
Sami Tolvanen <samitolvanen@google.com> wrote:

> > Does x86 have a way to differentiate between the two that record mcount
> > can check?  
> 
> I'm not sure if looking at the relocation alone is sufficient on x86,
> we might also have to decode the instruction, which is what objtool
> does. Did you have any thoughts on Peter's patch, or my initial
> suggestion, which adds a __nomcount attribute to affected functions?

There's a lot of code in this thread. Can you give me the message-id of
Peter's patch in question.

Thanks,

-- Steve

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-22 17:58                           ` Steven Rostedt
@ 2020-07-22 18:07                             ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-07-22 18:07 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Peter Zijlstra, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML, Josh Poimboeuf

On Wed, Jul 22, 2020 at 10:58 AM Steven Rostedt <rostedt@goodmis.org> wrote:
>
> On Mon, 20 Jul 2020 09:52:37 -0700
> Sami Tolvanen <samitolvanen@google.com> wrote:
>
> > > Does x86 have a way to differentiate between the two that record mcount
> > > can check?
> >
> > I'm not sure if looking at the relocation alone is sufficient on x86,
> > we might also have to decode the instruction, which is what objtool
> > does. Did you have any thoughts on Peter's patch, or my initial
> > suggestion, which adds a __nomcount attribute to affected functions?
>
> There's a lot of code in this thread. Can you give me the message-id of
> Peter's patch in question.

Sure, I was referring to the objtool patch in this message:

https://lore.kernel.org/lkml/20200625200235.GQ4781@hirez.programming.kicks-ass.net/

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH 11/22] pci: lto: fix PREL32 relocations
  2020-07-17 20:26   ` Bjorn Helgaas
@ 2020-07-22 18:15     ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-07-22 18:15 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML

Hi Bjorn,

On Fri, Jul 17, 2020 at 1:26 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> OK by me, but please update the subject to match convention:
>
>   PCI: Fix PREL32 relocations for LTO
>
> and include a hint in the commit log about what LTO is.  At least
> expand the initialism once.  Googling for "LTO" isn't very useful.
>
>   With Clang's Link Time Optimization (LTO), the compiler ... ?

Sure, I'll change this in the next version. Thanks for taking a look!

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-22 17:55                 ` Steven Rostedt
@ 2020-07-22 18:41                   ` Peter Zijlstra
  2020-07-22 19:09                     ` Steven Rostedt
  0 siblings, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-22 18:41 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf, mhelsley

On Wed, Jul 22, 2020 at 01:55:42PM -0400, Steven Rostedt wrote:

> > Ha! it is trying to convert the "CALL __fentry__" into a NOP and not
> > finding the CALL -- because objtool already made it a NOP...
> > 
> > Weird, I thought recordmcount would also write NOPs, it certainly has
> > code for that. I suppose we can use CC_USING_NOP_MCOUNT to avoid those,
> > but I'd rather Steve explain this before I wreck things further.
> 
> The reason for not having recordmcount insert all the nops, is because
> x86 has more than one optimal nop which is determined by the machine it
> runs on, and not at compile time. So we figured just updated it then.
> 
> We can change it to be a nop on boot, and just modify it if it's not
> the optimal nop already. 

Right, I throught that's what we'd be doing already, anyway:

> That said, Andi Kleen added an option to gcc called -mnop-mcount which
> will have gcc do both create the mcount section and convert the calls
> into nops. When doing so, it defines CC_USING_NOP_MCOUNT which will
> tell ftrace to expect the calls to already be converted.

That seems like the much easier solution, then we can forget about
recordmcount / objtool entirely for this.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-22 18:41                   ` Peter Zijlstra
@ 2020-07-22 19:09                     ` Steven Rostedt
  2020-07-22 20:03                       ` Sami Tolvanen
  2020-07-22 23:56                       ` Peter Zijlstra
  0 siblings, 2 replies; 213+ messages in thread
From: Steven Rostedt @ 2020-07-22 19:09 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf

On Wed, 22 Jul 2020 20:41:37 +0200
Peter Zijlstra <peterz@infradead.org> wrote:

> > That said, Andi Kleen added an option to gcc called -mnop-mcount which
> > will have gcc do both create the mcount section and convert the calls
> > into nops. When doing so, it defines CC_USING_NOP_MCOUNT which will
> > tell ftrace to expect the calls to already be converted.  
> 
> That seems like the much easier solution, then we can forget about
> recordmcount / objtool entirely for this.

Of course that was only for some gcc compilers, and I'm not sure if
clang can do this.

Or do you just see all compilers doing this in the future, and not
worrying about record-mcount at all, and bothering with objtool?

-- Steve

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-22 19:09                     ` Steven Rostedt
@ 2020-07-22 20:03                       ` Sami Tolvanen
  2020-07-22 23:56                       ` Peter Zijlstra
  1 sibling, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-07-22 20:03 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Peter Zijlstra, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	Kernel Hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	LKML, linux-pci, X86 ML, Josh Poimboeuf

On Wed, Jul 22, 2020 at 12:09 PM Steven Rostedt <rostedt@goodmis.org> wrote:
>
> On Wed, 22 Jul 2020 20:41:37 +0200
> Peter Zijlstra <peterz@infradead.org> wrote:
>
> > > That said, Andi Kleen added an option to gcc called -mnop-mcount which
> > > will have gcc do both create the mcount section and convert the calls
> > > into nops. When doing so, it defines CC_USING_NOP_MCOUNT which will
> > > tell ftrace to expect the calls to already be converted.
> >
> > That seems like the much easier solution, then we can forget about
> > recordmcount / objtool entirely for this.
>
> Of course that was only for some gcc compilers, and I'm not sure if
> clang can do this.
>
> Or do you just see all compilers doing this in the future, and not
> worrying about record-mcount at all, and bothering with objtool?

Clang appears to only support -mrecord-mcount and -mnop-mcount for
s390, so we still need recordmcount / objtool for x86.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-22 19:09                     ` Steven Rostedt
  2020-07-22 20:03                       ` Sami Tolvanen
@ 2020-07-22 23:56                       ` Peter Zijlstra
  2020-07-23  0:06                         ` Steven Rostedt
  1 sibling, 1 reply; 213+ messages in thread
From: Peter Zijlstra @ 2020-07-22 23:56 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf

On Wed, Jul 22, 2020 at 03:09:43PM -0400, Steven Rostedt wrote:
> On Wed, 22 Jul 2020 20:41:37 +0200
> Peter Zijlstra <peterz@infradead.org> wrote:
> 
> > > That said, Andi Kleen added an option to gcc called -mnop-mcount which
> > > will have gcc do both create the mcount section and convert the calls
> > > into nops. When doing so, it defines CC_USING_NOP_MCOUNT which will
> > > tell ftrace to expect the calls to already be converted.  
> > 
> > That seems like the much easier solution, then we can forget about
> > recordmcount / objtool entirely for this.
> 
> Of course that was only for some gcc compilers, and I'm not sure if
> clang can do this.
> 
> Or do you just see all compilers doing this in the future, and not
> worrying about record-mcount at all, and bothering with objtool?

I got the GCC version wrong :/ Both -mnop-mcount and -mrecord-mcount
landed in GCC-5, where our minimum GCC is now at 4.9.

Anyway, what do you prefer, I suppose I can make objtool whatever we
need, that patch is trivial. Simply recording the sites and not
rewriting them should be simple enough.

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-22 23:56                       ` Peter Zijlstra
@ 2020-07-23  0:06                         ` Steven Rostedt
  2020-08-06 22:09                           ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Steven Rostedt @ 2020-07-23  0:06 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Sami Tolvanen, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf

On Thu, 23 Jul 2020 01:56:20 +0200
Peter Zijlstra <peterz@infradead.org> wrote:

> Anyway, what do you prefer, I suppose I can make objtool whatever we
> need, that patch is trivial. Simply recording the sites and not
> rewriting them should be simple enough.

Either way. If objtool turns it into nops, just make it where we can
enable -DCC_USING_NOP_MCOUNT set, and the kernel will be unaware.

Or if you just add the locations, then that would work too.

-- Steve

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [RFC][PATCH] objtool,x86_64: Replace recordmcount with objtool
  2020-07-23  0:06                         ` Steven Rostedt
@ 2020-08-06 22:09                           ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-08-06 22:09 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Peter Zijlstra, Masahiro Yamada, Will Deacon, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Josh Poimboeuf

On Wed, Jul 22, 2020 at 08:06:08PM -0400, Steven Rostedt wrote:
> On Thu, 23 Jul 2020 01:56:20 +0200
> Peter Zijlstra <peterz@infradead.org> wrote:
> 
> > Anyway, what do you prefer, I suppose I can make objtool whatever we
> > need, that patch is trivial. Simply recording the sites and not
> > rewriting them should be simple enough.
> 
> Either way. If objtool turns it into nops, just make it where we can
> enable -DCC_USING_NOP_MCOUNT set, and the kernel will be unaware.
> 
> Or if you just add the locations, then that would work too.

I took Peter's earlier patch, rebased it on top of the current mainline
tree for easier testing, and tweaked the makefiles to only use objtool
--mcount when CONFIG_STACK_VALIDATION is enabled and the compiler
supports -mfentry. This works for me with both gcc and clang. Thoughts?

Sami


---
 Makefile                      | 38 ++++++++++++----
 arch/x86/Kconfig              |  1 +
 kernel/trace/Kconfig          |  5 +++
 scripts/Makefile.build        |  9 ++--
 tools/objtool/builtin-check.c |  3 +-
 tools/objtool/builtin.h       |  2 +-
 tools/objtool/check.c         | 83 +++++++++++++++++++++++++++++++++++
 tools/objtool/check.h         |  1 +
 tools/objtool/objtool.h       |  1 +
 9 files changed, 129 insertions(+), 14 deletions(-)

diff --git a/Makefile b/Makefile
index 5cfc3481207f..2d23b6b6c4c9 100644
--- a/Makefile
+++ b/Makefile
@@ -864,17 +864,34 @@ ifdef CONFIG_HAVE_FENTRY
   ifeq ($(call cc-option-yn, -mfentry),y)
     CC_FLAGS_FTRACE	+= -mfentry
     CC_FLAGS_USING	+= -DCC_USING_FENTRY
+    export CC_USING_FENTRY := 1
   endif
 endif
 export CC_FLAGS_FTRACE
-KBUILD_CFLAGS	+= $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING)
-KBUILD_AFLAGS	+= $(CC_FLAGS_USING)
 ifdef CONFIG_DYNAMIC_FTRACE
-	ifdef CONFIG_HAVE_C_RECORDMCOUNT
-		BUILD_C_RECORDMCOUNT := y
-		export BUILD_C_RECORDMCOUNT
-	endif
+  ifndef CC_USING_RECORD_MCOUNT
+  ifndef CC_USING_PATCHABLE_FUNCTION_ENTRY
+    # use objtool or recordmcount to generate mcount tables
+    ifdef CONFIG_HAVE_OBJTOOL_MCOUNT
+      ifdef CC_USING_FENTRY
+        USE_OBJTOOL_MCOUNT := y
+        CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT
+        export USE_OBJTOOL_MCOUNT
+      endif
+    endif
+    ifndef USE_OBJTOOL_MCOUNT
+      USE_RECORDMCOUNT := y
+      export USE_RECORDMCOUNT
+      ifdef CONFIG_HAVE_C_RECORDMCOUNT
+        BUILD_C_RECORDMCOUNT := y
+        export BUILD_C_RECORDMCOUNT
+      endif
+    endif
+  endif
+  endif
 endif
+KBUILD_CFLAGS	+= $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING)
+KBUILD_AFLAGS	+= $(CC_FLAGS_USING)
 endif
 
 # We trigger additional mismatches with less inlining
@@ -1211,11 +1228,16 @@ uapi-asm-generic:
 PHONY += prepare-objtool prepare-resolve_btfids
 prepare-objtool: $(objtool_target)
 ifeq ($(SKIP_STACK_VALIDATION),1)
+objtool-lib-prompt := "please install libelf-dev, libelf-devel or elfutils-libelf-devel"
+ifdef USE_OBJTOOL_MCOUNT
+	@echo "error: Cannot generate __mcount_loc for CONFIG_DYNAMIC_FTRACE=y, $(objtool-lib-prompt)" >&2
+	@false
+endif
 ifdef CONFIG_UNWINDER_ORC
-	@echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
+	@echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, $(objtool-lib-prompt)" >&2
 	@false
 else
-	@echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
+	@echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, $(objtool-lib-prompt)" >&2
 endif
 endif
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9a2849527dd7..149c94a44cf0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -163,6 +163,7 @@ config X86
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_CONTEXT_TRACKING		if X86_64
 	select HAVE_C_RECORDMCOUNT
+	select HAVE_OBJTOOL_MCOUNT		if STACK_VALIDATION
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index a4020c0b4508..b510af5b216c 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -56,6 +56,11 @@ config HAVE_C_RECORDMCOUNT
 	help
 	  C version of recordmcount available?
 
+config HAVE_OBJTOOL_MCOUNT
+	bool
+	help
+	  Arch supports objtool --mcount
+
 config TRACER_MAX_TRACE
 	bool
 
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 2e8810b7e5ed..f66f8c0ef294 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -175,8 +175,7 @@ cmd_modversions_c =								\
 	fi
 endif
 
-ifdef CONFIG_FTRACE_MCOUNT_RECORD
-ifndef CC_USING_RECORD_MCOUNT
+ifdef USE_RECORDMCOUNT
 # compiler will not generate __mcount_loc use recordmcount or recordmcount.pl
 ifdef BUILD_C_RECORDMCOUNT
 ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
@@ -203,8 +202,7 @@ recordmcount_source := $(srctree)/scripts/recordmcount.pl
 endif # BUILD_C_RECORDMCOUNT
 cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)),	\
 	$(sub_cmd_record_mcount))
-endif # CC_USING_RECORD_MCOUNT
-endif # CONFIG_FTRACE_MCOUNT_RECORD
+endif # USE_RECORDMCOUNT
 
 ifdef CONFIG_STACK_VALIDATION
 ifneq ($(SKIP_STACK_VALIDATION),1)
@@ -227,6 +225,9 @@ endif
 ifdef CONFIG_X86_SMAP
   objtool_args += --uaccess
 endif
+ifdef USE_OBJTOOL_MCOUNT
+  objtool_args += --mcount
+endif
 
 # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c
index 7a44174967b5..71595cf4946d 100644
--- a/tools/objtool/builtin-check.c
+++ b/tools/objtool/builtin-check.c
@@ -18,7 +18,7 @@
 #include "builtin.h"
 #include "objtool.h"
 
-bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux;
+bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, mcount;
 
 static const char * const check_usage[] = {
 	"objtool check [<options>] file.o",
@@ -35,6 +35,7 @@ const struct option check_options[] = {
 	OPT_BOOLEAN('s', "stats", &stats, "print statistics"),
 	OPT_BOOLEAN('d', "duplicate", &validate_dup, "duplicate validation for vmlinux.o"),
 	OPT_BOOLEAN('l', "vmlinux", &vmlinux, "vmlinux.o validation"),
+	OPT_BOOLEAN('M', "mcount", &mcount, "generate __mcount_loc"),
 	OPT_END(),
 };
 
diff --git a/tools/objtool/builtin.h b/tools/objtool/builtin.h
index 85c979caa367..94565a72b701 100644
--- a/tools/objtool/builtin.h
+++ b/tools/objtool/builtin.h
@@ -8,7 +8,7 @@
 #include <subcmd/parse-options.h>
 
 extern const struct option check_options[];
-extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux;
+extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, mcount;
 
 extern int cmd_check(int argc, const char **argv);
 extern int cmd_orc(int argc, const char **argv);
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index e034a8f24f46..6e0b478dc065 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -433,6 +433,65 @@ static int add_dead_ends(struct objtool_file *file)
 	return 0;
 }
 
+static int create_mcount_loc_sections(struct objtool_file *file)
+{
+	struct section *sec, *reloc_sec;
+	struct reloc *reloc;
+	unsigned long *loc;
+	struct instruction *insn;
+	int idx;
+
+	sec = find_section_by_name(file->elf, "__mcount_loc");
+	if (sec) {
+		INIT_LIST_HEAD(&file->mcount_loc_list);
+		WARN("file already has __mcount_loc section, skipping");
+		return 0;
+	}
+
+	if (list_empty(&file->mcount_loc_list))
+		return 0;
+
+	idx = 0;
+	list_for_each_entry(insn, &file->mcount_loc_list, mcount_loc_node)
+		idx++;
+
+	sec = elf_create_section(file->elf, "__mcount_loc", sizeof(unsigned long), idx);
+	if (!sec)
+		return -1;
+
+	reloc_sec = elf_create_reloc_section(file->elf, sec, SHT_RELA);
+	if (!reloc_sec)
+		return -1;
+
+	idx = 0;
+	list_for_each_entry(insn, &file->mcount_loc_list, mcount_loc_node) {
+
+		loc = (unsigned long *)sec->data->d_buf + idx;
+		memset(loc, 0, sizeof(unsigned long));
+
+		reloc = malloc(sizeof(*reloc));
+		if (!reloc) {
+			perror("malloc");
+			return -1;
+		}
+		memset(reloc, 0, sizeof(*reloc));
+
+		reloc->sym = insn->sec->sym;
+		reloc->addend = insn->offset;
+		reloc->type = R_X86_64_64;
+		reloc->offset = idx * sizeof(unsigned long);
+		reloc->sec = reloc_sec;
+		elf_add_reloc(file->elf, reloc);
+
+		idx++;
+	}
+
+	if (elf_rebuild_reloc_section(file->elf, reloc_sec))
+		return -1;
+
+	return 0;
+}
+
 /*
  * Warnings shouldn't be reported for ignored functions.
  */
@@ -784,6 +843,22 @@ static int add_call_destinations(struct objtool_file *file)
 			insn->type = INSN_NOP;
 		}
 
+		if (mcount && !strcmp(insn->call_dest->name, "__fentry__")) {
+			if (reloc) {
+				reloc->type = R_NONE;
+				elf_write_reloc(file->elf, reloc);
+			}
+
+			elf_write_insn(file->elf, insn->sec,
+				       insn->offset, insn->len,
+				       arch_nop_insn(insn->len));
+
+			insn->type = INSN_NOP;
+
+			list_add_tail(&insn->mcount_loc_node,
+				      &file->mcount_loc_list);
+		}
+
 		/*
 		 * Whatever stack impact regular CALLs have, should be undone
 		 * by the RETURN of the called function.
@@ -2791,6 +2866,7 @@ int check(const char *_objname, bool orc)
 
 	INIT_LIST_HEAD(&file.insn_list);
 	hash_init(file.insn_hash);
+	INIT_LIST_HEAD(&file.mcount_loc_list);
 	file.c_file = !vmlinux && find_section_by_name(file.elf, ".comment");
 	file.ignore_unreachables = no_unreachable;
 	file.hints = false;
@@ -2838,6 +2914,13 @@ int check(const char *_objname, bool orc)
 		warnings += ret;
 	}
 
+	if (mcount) {
+		ret = create_mcount_loc_sections(&file);
+		if (ret < 0)
+			goto out;
+		warnings += ret;
+	}
+
 	if (orc) {
 		ret = create_orc(&file);
 		if (ret < 0)
diff --git a/tools/objtool/check.h b/tools/objtool/check.h
index 061aa96e15d3..b62afd3d970b 100644
--- a/tools/objtool/check.h
+++ b/tools/objtool/check.h
@@ -22,6 +22,7 @@ struct insn_state {
 struct instruction {
 	struct list_head list;
 	struct hlist_node hash;
+	struct list_head mcount_loc_node;
 	struct section *sec;
 	unsigned long offset;
 	unsigned int len;
diff --git a/tools/objtool/objtool.h b/tools/objtool/objtool.h
index 528028a66816..427806079540 100644
--- a/tools/objtool/objtool.h
+++ b/tools/objtool/objtool.h
@@ -16,6 +16,7 @@ struct objtool_file {
 	struct elf *elf;
 	struct list_head insn_list;
 	DECLARE_HASHTABLE(insn_hash, 20);
+	struct list_head mcount_loc_list;
 	bool ignore_unreachables, c_file, hints, rodata;
 };
 


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 00/28] Add support for Clang LTO
  2020-06-24 20:31 [PATCH 00/22] add support for Clang LTO Sami Tolvanen
                   ` (24 preceding siblings ...)
  2020-07-11 16:32 ` Paul Menzel
@ 2020-09-03 20:30 ` Sami Tolvanen
  2020-09-03 20:30   ` [PATCH v2 01/28] x86/boot/compressed: Disable relocation relaxation Sami Tolvanen
                     ` (32 more replies)
  25 siblings, 33 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

This patch series adds support for building x86_64 and arm64 kernels
with Clang's Link Time Optimization (LTO).

In addition to performance, the primary motivation for LTO is
to allow Clang's Control-Flow Integrity (CFI) to be used in the
kernel. Google has shipped millions of Pixel devices running three
major kernel versions with LTO+CFI since 2018.

Most of the patches are build system changes for handling LLVM
bitcode, which Clang produces with LTO instead of ELF object files,
postponing ELF processing until a later stage, and ensuring initcall
ordering.

Note that patches 1-4 are not directly related to LTO, but are
needed to compile LTO kernels with ToT Clang, so I'm including them
in the series for your convenience:

 - Patches 1-3 are required for building the kernel with ToT Clang,
   and IAS, and patch 4 is needed to build allmodconfig with LTO.

 - Patches 3-4 are already in linux-next, but not yet in 5.9-rc.

---
Changes in v2:

  - Fixed -Wmissing-prototypes warnings with W=1.

  - Dropped cc-option from -fsplit-lto-unit and added .thinlto-cache
    scrubbing to make distclean.

  - Added a comment about Clang >=11 being required.

  - Added a patch to disable LTO for the arm64 KVM nVHE code.

  - Disabled objtool's noinstr validation with LTO unless enabled.

  - Included Peter's proposed objtool mcount patch in the series
    and replaced recordmcount with the objtool pass to avoid
    whitelisting relocations that are not calls.

  - Updated several commit messages with better explanations.


Arvind Sankar (2):
  x86/boot/compressed: Disable relocation relaxation
  x86/asm: Replace __force_order with memory clobber

Luca Stefani (1):
  RAS/CEC: Fix cec_init() prototype

Nick Desaulniers (1):
  lib/string.c: implement stpcpy

Peter Zijlstra (1):
  objtool: Add a pass for generating __mcount_loc

Sami Tolvanen (23):
  objtool: Don't autodetect vmlinux.o
  kbuild: add support for objtool mcount
  x86, build: use objtool mcount
  kbuild: add support for Clang LTO
  kbuild: lto: fix module versioning
  kbuild: lto: postpone objtool
  kbuild: lto: limit inlining
  kbuild: lto: merge module sections
  kbuild: lto: remove duplicate dependencies from .mod files
  init: lto: ensure initcall ordering
  init: lto: fix PREL32 relocations
  PCI: Fix PREL32 relocations for LTO
  modpost: lto: strip .lto from module names
  scripts/mod: disable LTO for empty.c
  efi/libstub: disable LTO
  drivers/misc/lkdtm: disable LTO for rodata.o
  arm64: export CC_USING_PATCHABLE_FUNCTION_ENTRY
  arm64: vdso: disable LTO
  KVM: arm64: disable LTO for the nVHE directory
  arm64: allow LTO_CLANG and THINLTO to be selected
  x86, vdso: disable LTO only for vDSO
  x86, relocs: Ignore L4_PAGE_OFFSET relocations
  x86, build: allow LTO_CLANG and THINLTO to be selected

 .gitignore                            |   1 +
 Makefile                              |  65 ++++++-
 arch/Kconfig                          |  67 +++++++
 arch/arm64/Kconfig                    |   2 +
 arch/arm64/Makefile                   |   1 +
 arch/arm64/kernel/vdso/Makefile       |   4 +-
 arch/arm64/kvm/hyp/nvhe/Makefile      |   4 +-
 arch/x86/Kconfig                      |   3 +
 arch/x86/Makefile                     |   5 +
 arch/x86/boot/compressed/Makefile     |   2 +
 arch/x86/boot/compressed/pgtable_64.c |   9 -
 arch/x86/entry/vdso/Makefile          |   5 +-
 arch/x86/include/asm/special_insns.h  |  28 +--
 arch/x86/kernel/cpu/common.c          |   4 +-
 arch/x86/tools/relocs.c               |   1 +
 drivers/firmware/efi/libstub/Makefile |   2 +
 drivers/misc/lkdtm/Makefile           |   1 +
 drivers/ras/cec.c                     |   9 +-
 include/asm-generic/vmlinux.lds.h     |  11 +-
 include/linux/init.h                  |  79 +++++++-
 include/linux/pci.h                   |  19 +-
 kernel/trace/Kconfig                  |   5 +
 lib/string.c                          |  24 +++
 scripts/Makefile.build                |  55 +++++-
 scripts/Makefile.lib                  |   6 +-
 scripts/Makefile.modfinal             |  31 ++-
 scripts/Makefile.modpost              |  26 ++-
 scripts/generate_initcall_order.pl    | 270 ++++++++++++++++++++++++++
 scripts/link-vmlinux.sh               |  94 ++++++++-
 scripts/mod/Makefile                  |   1 +
 scripts/mod/modpost.c                 |  16 +-
 scripts/mod/modpost.h                 |   9 +
 scripts/mod/sumversion.c              |   6 +-
 scripts/module-lto.lds                |  26 +++
 tools/objtool/builtin-check.c         |  13 +-
 tools/objtool/builtin.h               |   2 +-
 tools/objtool/check.c                 |  83 ++++++++
 tools/objtool/check.h                 |   1 +
 tools/objtool/objtool.h               |   1 +
 39 files changed, 883 insertions(+), 108 deletions(-)
 create mode 100755 scripts/generate_initcall_order.pl
 create mode 100644 scripts/module-lto.lds


base-commit: e28f0104343d0c132fa37f479870c9e43355fee4
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 01/28] x86/boot/compressed: Disable relocation relaxation
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 21:44     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 02/28] x86/asm: Replace __force_order with memory clobber Sami Tolvanen
                     ` (31 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Arvind Sankar

From: Arvind Sankar <nivedita@alum.mit.edu>

The x86-64 psABI [0] specifies special relocation types
(R_X86_64_[REX_]GOTPCRELX) for indirection through the Global Offset
Table, semantically equivalent to R_X86_64_GOTPCREL, which the linker
can take advantage of for optimization (relaxation) at link time. This
is supported by LLD and binutils versions 2.26 onwards.

The compressed kernel is position-independent code, however, when using
LLD or binutils versions before 2.27, it must be linked without the -pie
option. In this case, the linker may optimize certain instructions into
a non-position-independent form, by converting foo@GOTPCREL(%rip) to $foo.

This potential issue has been present with LLD and binutils-2.26 for a
long time, but it has never manifested itself before now:
- LLD and binutils-2.26 only relax
	movq	foo@GOTPCREL(%rip), %reg
  to
	leaq	foo(%rip), %reg
  which is still position-independent, rather than
	mov	$foo, %reg
  which is permitted by the psABI when -pie is not enabled.
- gcc happens to only generate GOTPCREL relocations on mov instructions.
- clang does generate GOTPCREL relocations on non-mov instructions, but
  when building the compressed kernel, it uses its integrated assembler
  (due to the redefinition of KBUILD_CFLAGS dropping -no-integrated-as),
  which has so far defaulted to not generating the GOTPCRELX
  relocations.

Nick Desaulniers reports [1,2]:
  A recent change [3] to a default value of configuration variable
  (ENABLE_X86_RELAX_RELOCATIONS OFF -> ON) in LLVM now causes Clang's
  integrated assembler to emit R_X86_64_GOTPCRELX/R_X86_64_REX_GOTPCRELX
  relocations. LLD will relax instructions with these relocations based
  on whether the image is being linked as position independent or not.
  When not, then LLD will relax these instructions to use absolute
  addressing mode (R_RELAX_GOT_PC_NOPIC). This causes kernels built with
  Clang and linked with LLD to fail to boot.

Patch series [4] is a solution to allow the compressed kernel to be
linked with -pie unconditionally, but even if merged is unlikely to be
backported. As a simple solution that can be applied to stable as well,
prevent the assembler from generating the relaxed relocation types using
the -mrelax-relocations=no option. For ease of backporting, do this
unconditionally.

[0] https://gitlab.com/x86-psABIs/x86-64-ABI/-/blob/master/x86-64-ABI/linker-optimization.tex#L65
[1] https://lore.kernel.org/lkml/20200807194100.3570838-1-ndesaulniers@google.com/
[2] https://github.com/ClangBuiltLinux/linux/issues/1121
[3] https://reviews.llvm.org/rGc41a18cf61790fc898dcda1055c3efbf442c14c0
[4] https://lore.kernel.org/lkml/20200731202738.2577854-1-nivedita@alum.mit.edu/

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
---
 arch/x86/boot/compressed/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 3962f592633d..ff7894f39e0e 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -43,6 +43,8 @@ KBUILD_CFLAGS += -Wno-pointer-sign
 KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
 KBUILD_CFLAGS += -D__DISABLE_EXPORTS
+# Disable relocation relaxation in case the link is not PIE.
+KBUILD_CFLAGS += $(call as-option,-Wa$(comma)-mrelax-relocations=no)
 
 KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
 GCOV_PROFILE := n
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 02/28] x86/asm: Replace __force_order with memory clobber
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
  2020-09-03 20:30   ` [PATCH v2 01/28] x86/boot/compressed: Disable relocation relaxation Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 21:45     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 03/28] lib/string.c: implement stpcpy Sami Tolvanen
                     ` (30 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Arvind Sankar

From: Arvind Sankar <nivedita@alum.mit.edu>

The CRn accessor functions use __force_order as a dummy operand to
prevent the compiler from reordering CRn reads/writes with respect to
each other.

The fact that the asm is volatile should be enough to prevent this:
volatile asm statements should be executed in program order. However GCC
4.9.x and 5.x have a bug that might result in reordering. This was fixed
in 8.1, 7.3 and 6.5. Versions prior to these, including 5.x and 4.9.x,
may reorder volatile asm statements with respect to each other.

There are some issues with __force_order as implemented:
- It is used only as an input operand for the write functions, and hence
  doesn't do anything additional to prevent reordering writes.
- It allows memory accesses to be cached/reordered across write
  functions, but CRn writes affect the semantics of memory accesses, so
  this could be dangerous.
- __force_order is not actually defined in the kernel proper, but the
  LLVM toolchain can in some cases require a definition: LLVM (as well
  as GCC 4.9) requires it for PIE code, which is why the compressed
  kernel has a definition, but also the clang integrated assembler may
  consider the address of __force_order to be significant, resulting in
  a reference that requires a definition.

Fix this by:
- Using a memory clobber for the write functions to additionally prevent
  caching/reordering memory accesses across CRn writes.
- Using a dummy input operand with an arbitrary constant address for the
  read functions, instead of a global variable. This will prevent reads
  from being reordered across writes, while allowing memory loads to be
  cached/reordered across CRn reads, which should be safe.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82602
Link: https://lore.kernel.org/lkml/20200527135329.1172644-1-arnd@arndb.de/
---
 arch/x86/boot/compressed/pgtable_64.c |  9 ---------
 arch/x86/include/asm/special_insns.h  | 28 ++++++++++++++-------------
 arch/x86/kernel/cpu/common.c          |  4 ++--
 3 files changed, 17 insertions(+), 24 deletions(-)

diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
index c8862696a47b..7d0394f4ebf9 100644
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -5,15 +5,6 @@
 #include "pgtable.h"
 #include "../string.h"
 
-/*
- * __force_order is used by special_insns.h asm code to force instruction
- * serialization.
- *
- * It is not referenced from the code, but GCC < 5 with -fPIE would fail
- * due to an undefined symbol. Define it to make these ancient GCCs work.
- */
-unsigned long __force_order;
-
 #define BIOS_START_MIN		0x20000U	/* 128K, less than this is insane */
 #define BIOS_START_MAX		0x9f000U	/* 640K, absolute maximum */
 
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index 59a3e13204c3..d6e3bb9363d2 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -11,45 +11,47 @@
 #include <linux/jump_label.h>
 
 /*
- * Volatile isn't enough to prevent the compiler from reordering the
- * read/write functions for the control registers and messing everything up.
- * A memory clobber would solve the problem, but would prevent reordering of
- * all loads stores around it, which can hurt performance. Solution is to
- * use a variable and mimic reads and writes to it to enforce serialization
+ * The compiler should not reorder volatile asm statements with respect to each
+ * other: they should execute in program order. However GCC 4.9.x and 5.x have
+ * a bug (which was fixed in 8.1, 7.3 and 6.5) where they might reorder
+ * volatile asm. The write functions are not affected since they have memory
+ * clobbers preventing reordering. To prevent reads from being reordered with
+ * respect to writes, use a dummy memory operand.
  */
-extern unsigned long __force_order;
+
+#define __FORCE_ORDER "m"(*(unsigned int *)0x1000UL)
 
 void native_write_cr0(unsigned long val);
 
 static inline unsigned long native_read_cr0(void)
 {
 	unsigned long val;
-	asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
+	asm volatile("mov %%cr0,%0\n\t" : "=r" (val) : __FORCE_ORDER);
 	return val;
 }
 
 static __always_inline unsigned long native_read_cr2(void)
 {
 	unsigned long val;
-	asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
+	asm volatile("mov %%cr2,%0\n\t" : "=r" (val) : __FORCE_ORDER);
 	return val;
 }
 
 static __always_inline void native_write_cr2(unsigned long val)
 {
-	asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
+	asm volatile("mov %0,%%cr2": : "r" (val) : "memory");
 }
 
 static inline unsigned long __native_read_cr3(void)
 {
 	unsigned long val;
-	asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
+	asm volatile("mov %%cr3,%0\n\t" : "=r" (val) : __FORCE_ORDER);
 	return val;
 }
 
 static inline void native_write_cr3(unsigned long val)
 {
-	asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
+	asm volatile("mov %0,%%cr3": : "r" (val) : "memory");
 }
 
 static inline unsigned long native_read_cr4(void)
@@ -64,10 +66,10 @@ static inline unsigned long native_read_cr4(void)
 	asm volatile("1: mov %%cr4, %0\n"
 		     "2:\n"
 		     _ASM_EXTABLE(1b, 2b)
-		     : "=r" (val), "=m" (__force_order) : "0" (0));
+		     : "=r" (val) : "0" (0), __FORCE_ORDER);
 #else
 	/* CR4 always exists on x86_64. */
-	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
+	asm volatile("mov %%cr4,%0\n\t" : "=r" (val) : __FORCE_ORDER);
 #endif
 	return val;
 }
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c5d6f17d9b9d..178499f90366 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -359,7 +359,7 @@ void native_write_cr0(unsigned long val)
 	unsigned long bits_missing = 0;
 
 set_register:
-	asm volatile("mov %0,%%cr0": "+r" (val), "+m" (__force_order));
+	asm volatile("mov %0,%%cr0": "+r" (val) : : "memory");
 
 	if (static_branch_likely(&cr_pinning)) {
 		if (unlikely((val & X86_CR0_WP) != X86_CR0_WP)) {
@@ -378,7 +378,7 @@ void native_write_cr4(unsigned long val)
 	unsigned long bits_changed = 0;
 
 set_register:
-	asm volatile("mov %0,%%cr4": "+r" (val), "+m" (cr4_pinned_bits));
+	asm volatile("mov %0,%%cr4": "+r" (val) : : "memory");
 
 	if (static_branch_likely(&cr_pinning)) {
 		if (unlikely((val & cr4_pinned_mask) != cr4_pinned_bits)) {
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 03/28] lib/string.c: implement stpcpy
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
  2020-09-03 20:30   ` [PATCH v2 01/28] x86/boot/compressed: Disable relocation relaxation Sami Tolvanen
  2020-09-03 20:30   ` [PATCH v2 02/28] x86/asm: Replace __force_order with memory clobber Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 21:47     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 04/28] RAS/CEC: Fix cec_init() prototype Sami Tolvanen
                     ` (29 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

From: Nick Desaulniers <ndesaulniers@google.com>

LLVM implemented a recent "libcall optimization" that lowers calls to
`sprintf(dest, "%s", str)` where the return value is used to
`stpcpy(dest, str) - dest`. This generally avoids the machinery involved
in parsing format strings.  `stpcpy` is just like `strcpy` except it
returns the pointer to the new tail of `dest`.  This optimization was
introduced into clang-12.

Implement this so that we don't observe linkage failures due to missing
symbol definitions for `stpcpy`.

Similar to last year's fire drill with:
commit 5f074f3e192f ("lib/string.c: implement a basic bcmp")

The kernel is somewhere between a "freestanding" environment (no full libc)
and "hosted" environment (many symbols from libc exist with the same
type, function signature, and semantics).

As H. Peter Anvin notes, there's not really a great way to inform the
compiler that you're targeting a freestanding environment but would like
to opt-in to some libcall optimizations (see pr/47280 below), rather than
opt-out.

Arvind notes, -fno-builtin-* behaves slightly differently between GCC
and Clang, and Clang is missing many __builtin_* definitions, which I
consider a bug in Clang and am working on fixing.

Masahiro summarizes the subtle distinction between compilers justly:
  To prevent transformation from foo() into bar(), there are two ways in
  Clang to do that; -fno-builtin-foo, and -fno-builtin-bar.  There is
  only one in GCC; -fno-buitin-foo.

(Any difference in that behavior in Clang is likely a bug from a missing
__builtin_* definition.)

Masahiro also notes:
  We want to disable optimization from foo() to bar(),
  but we may still benefit from the optimization from
  foo() into something else. If GCC implements the same transform, we
  would run into a problem because it is not -fno-builtin-bar, but
  -fno-builtin-foo that disables that optimization.

  In this regard, -fno-builtin-foo would be more future-proof than
  -fno-built-bar, but -fno-builtin-foo is still potentially overkill. We
  may want to prevent calls from foo() being optimized into calls to
  bar(), but we still may want other optimization on calls to foo().

It seems that compilers today don't quite provide the fine grain control
over which libcall optimizations pseudo-freestanding environments would
prefer.

Finally, Kees notes that this interface is unsafe, so we should not
encourage its use.  As such, I've removed the declaration from any
header, but it still needs to be exported to avoid linkage errors in
modules.

Reported-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Andy Lavr <andy.lavr@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://bugs.llvm.org/show_bug.cgi?id=47162
Link: https://bugs.llvm.org/show_bug.cgi?id=47280
Link: https://github.com/ClangBuiltLinux/linux/issues/1126
Link: https://man7.org/linux/man-pages/man3/stpcpy.3.html
Link: https://pubs.opengroup.org/onlinepubs/9699919799/functions/stpcpy.html
Link: https://reviews.llvm.org/D85963
---
 lib/string.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/lib/string.c b/lib/string.c
index 6012c385fb31..6bd0cf0fb009 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -272,6 +272,30 @@ ssize_t strscpy_pad(char *dest, const char *src, size_t count)
 }
 EXPORT_SYMBOL(strscpy_pad);
 
+/**
+ * stpcpy - copy a string from src to dest returning a pointer to the new end
+ *          of dest, including src's %NUL-terminator. May overrun dest.
+ * @dest: pointer to end of string being copied into. Must be large enough
+ *        to receive copy.
+ * @src: pointer to the beginning of string being copied from. Must not overlap
+ *       dest.
+ *
+ * stpcpy differs from strcpy in a key way: the return value is the new
+ * %NUL-terminated character. (for strcpy, the return value is a pointer to
+ * src. This interface is considered unsafe as it doesn't perform bounds
+ * checking of the inputs. As such it's not recommended for usage. Instead,
+ * its definition is provided in case the compiler lowers other libcalls to
+ * stpcpy.
+ */
+char *stpcpy(char *__restrict__ dest, const char *__restrict__ src);
+char *stpcpy(char *__restrict__ dest, const char *__restrict__ src)
+{
+	while ((*dest++ = *src++) != '\0')
+		/* nothing */;
+	return --dest;
+}
+EXPORT_SYMBOL(stpcpy);
+
 #ifndef __HAVE_ARCH_STRCAT
 /**
  * strcat - Append one %NUL-terminated string to another
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 04/28] RAS/CEC: Fix cec_init() prototype
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (2 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 03/28] lib/string.c: implement stpcpy Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 21:50     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 05/28] objtool: Add a pass for generating __mcount_loc Sami Tolvanen
                     ` (28 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Luca Stefani, Sami Tolvanen

From: Luca Stefani <luca.stefani.ge1@gmail.com>

late_initcall() expects a function that returns an integer. Update the
function signature to match.

 [ bp: Massage commit message into proper sentences. ]

Fixes: 9554bfe403nd ("x86/mce: Convert the CEC to use the MCE notifier")
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lkml.kernel.org/r/20200805095708.83939-1-luca.stefani.ge1@gmail.com
---
 drivers/ras/cec.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/ras/cec.c b/drivers/ras/cec.c
index 569d9ad2c594..6939aa5b3dc7 100644
--- a/drivers/ras/cec.c
+++ b/drivers/ras/cec.c
@@ -553,20 +553,20 @@ static struct notifier_block cec_nb = {
 	.priority	= MCE_PRIO_CEC,
 };
 
-static void __init cec_init(void)
+static int __init cec_init(void)
 {
 	if (ce_arr.disabled)
-		return;
+		return -ENODEV;
 
 	ce_arr.array = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!ce_arr.array) {
 		pr_err("Error allocating CE array page!\n");
-		return;
+		return -ENOMEM;
 	}
 
 	if (create_debugfs_nodes()) {
 		free_page((unsigned long)ce_arr.array);
-		return;
+		return -ENOMEM;
 	}
 
 	INIT_DELAYED_WORK(&cec_work, cec_work_fn);
@@ -575,6 +575,7 @@ static void __init cec_init(void)
 	mce_register_decode_chain(&cec_nb);
 
 	pr_info("Correctable Errors collector initialized.\n");
+	return 0;
 }
 late_initcall(cec_init);
 
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 05/28] objtool: Add a pass for generating __mcount_loc
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (3 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 04/28] RAS/CEC: Fix cec_init() prototype Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 21:51     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 06/28] objtool: Don't autodetect vmlinux.o Sami Tolvanen
                     ` (27 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

From: Peter Zijlstra <peterz@infradead.org>

Add the --mcount option for generating __mcount_loc sections
needed for dynamic ftrace. Using this pass requires the kernel to
be compiled with -mfentry and CC_USING_NOP_MCOUNT to be defined
in Makefile.

Link: https://lore.kernel.org/lkml/20200625200235.GQ4781@hirez.programming.kicks-ass.net/
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[Sami: rebased to mainline, dropped config changes, fixed to actually use
       --mcount, and wrote a commit message.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 tools/objtool/builtin-check.c |  3 +-
 tools/objtool/builtin.h       |  2 +-
 tools/objtool/check.c         | 83 +++++++++++++++++++++++++++++++++++
 tools/objtool/check.h         |  1 +
 tools/objtool/objtool.h       |  1 +
 5 files changed, 88 insertions(+), 2 deletions(-)

diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c
index 7a44174967b5..71595cf4946d 100644
--- a/tools/objtool/builtin-check.c
+++ b/tools/objtool/builtin-check.c
@@ -18,7 +18,7 @@
 #include "builtin.h"
 #include "objtool.h"
 
-bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux;
+bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, mcount;
 
 static const char * const check_usage[] = {
 	"objtool check [<options>] file.o",
@@ -35,6 +35,7 @@ const struct option check_options[] = {
 	OPT_BOOLEAN('s', "stats", &stats, "print statistics"),
 	OPT_BOOLEAN('d', "duplicate", &validate_dup, "duplicate validation for vmlinux.o"),
 	OPT_BOOLEAN('l', "vmlinux", &vmlinux, "vmlinux.o validation"),
+	OPT_BOOLEAN('M', "mcount", &mcount, "generate __mcount_loc"),
 	OPT_END(),
 };
 
diff --git a/tools/objtool/builtin.h b/tools/objtool/builtin.h
index 85c979caa367..94565a72b701 100644
--- a/tools/objtool/builtin.h
+++ b/tools/objtool/builtin.h
@@ -8,7 +8,7 @@
 #include <subcmd/parse-options.h>
 
 extern const struct option check_options[];
-extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux;
+extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess, stats, validate_dup, vmlinux, mcount;
 
 extern int cmd_check(int argc, const char **argv);
 extern int cmd_orc(int argc, const char **argv);
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index e034a8f24f46..6e0b478dc065 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -433,6 +433,65 @@ static int add_dead_ends(struct objtool_file *file)
 	return 0;
 }
 
+static int create_mcount_loc_sections(struct objtool_file *file)
+{
+	struct section *sec, *reloc_sec;
+	struct reloc *reloc;
+	unsigned long *loc;
+	struct instruction *insn;
+	int idx;
+
+	sec = find_section_by_name(file->elf, "__mcount_loc");
+	if (sec) {
+		INIT_LIST_HEAD(&file->mcount_loc_list);
+		WARN("file already has __mcount_loc section, skipping");
+		return 0;
+	}
+
+	if (list_empty(&file->mcount_loc_list))
+		return 0;
+
+	idx = 0;
+	list_for_each_entry(insn, &file->mcount_loc_list, mcount_loc_node)
+		idx++;
+
+	sec = elf_create_section(file->elf, "__mcount_loc", sizeof(unsigned long), idx);
+	if (!sec)
+		return -1;
+
+	reloc_sec = elf_create_reloc_section(file->elf, sec, SHT_RELA);
+	if (!reloc_sec)
+		return -1;
+
+	idx = 0;
+	list_for_each_entry(insn, &file->mcount_loc_list, mcount_loc_node) {
+
+		loc = (unsigned long *)sec->data->d_buf + idx;
+		memset(loc, 0, sizeof(unsigned long));
+
+		reloc = malloc(sizeof(*reloc));
+		if (!reloc) {
+			perror("malloc");
+			return -1;
+		}
+		memset(reloc, 0, sizeof(*reloc));
+
+		reloc->sym = insn->sec->sym;
+		reloc->addend = insn->offset;
+		reloc->type = R_X86_64_64;
+		reloc->offset = idx * sizeof(unsigned long);
+		reloc->sec = reloc_sec;
+		elf_add_reloc(file->elf, reloc);
+
+		idx++;
+	}
+
+	if (elf_rebuild_reloc_section(file->elf, reloc_sec))
+		return -1;
+
+	return 0;
+}
+
 /*
  * Warnings shouldn't be reported for ignored functions.
  */
@@ -784,6 +843,22 @@ static int add_call_destinations(struct objtool_file *file)
 			insn->type = INSN_NOP;
 		}
 
+		if (mcount && !strcmp(insn->call_dest->name, "__fentry__")) {
+			if (reloc) {
+				reloc->type = R_NONE;
+				elf_write_reloc(file->elf, reloc);
+			}
+
+			elf_write_insn(file->elf, insn->sec,
+				       insn->offset, insn->len,
+				       arch_nop_insn(insn->len));
+
+			insn->type = INSN_NOP;
+
+			list_add_tail(&insn->mcount_loc_node,
+				      &file->mcount_loc_list);
+		}
+
 		/*
 		 * Whatever stack impact regular CALLs have, should be undone
 		 * by the RETURN of the called function.
@@ -2791,6 +2866,7 @@ int check(const char *_objname, bool orc)
 
 	INIT_LIST_HEAD(&file.insn_list);
 	hash_init(file.insn_hash);
+	INIT_LIST_HEAD(&file.mcount_loc_list);
 	file.c_file = !vmlinux && find_section_by_name(file.elf, ".comment");
 	file.ignore_unreachables = no_unreachable;
 	file.hints = false;
@@ -2838,6 +2914,13 @@ int check(const char *_objname, bool orc)
 		warnings += ret;
 	}
 
+	if (mcount) {
+		ret = create_mcount_loc_sections(&file);
+		if (ret < 0)
+			goto out;
+		warnings += ret;
+	}
+
 	if (orc) {
 		ret = create_orc(&file);
 		if (ret < 0)
diff --git a/tools/objtool/check.h b/tools/objtool/check.h
index 061aa96e15d3..b62afd3d970b 100644
--- a/tools/objtool/check.h
+++ b/tools/objtool/check.h
@@ -22,6 +22,7 @@ struct insn_state {
 struct instruction {
 	struct list_head list;
 	struct hlist_node hash;
+	struct list_head mcount_loc_node;
 	struct section *sec;
 	unsigned long offset;
 	unsigned int len;
diff --git a/tools/objtool/objtool.h b/tools/objtool/objtool.h
index 528028a66816..427806079540 100644
--- a/tools/objtool/objtool.h
+++ b/tools/objtool/objtool.h
@@ -16,6 +16,7 @@ struct objtool_file {
 	struct elf *elf;
 	struct list_head insn_list;
 	DECLARE_HASHTABLE(insn_hash, 20);
+	struct list_head mcount_loc_list;
 	bool ignore_unreachables, c_file, hints, rodata;
 };
 
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 06/28] objtool: Don't autodetect vmlinux.o
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (4 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 05/28] objtool: Add a pass for generating __mcount_loc Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 21:52     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 07/28] kbuild: add support for objtool mcount Sami Tolvanen
                     ` (26 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With LTO, we run objtool on vmlinux.o, but don't want noinstr
validation. This change requires --vmlinux to be passed to objtool
explicitly.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 scripts/link-vmlinux.sh       |  2 +-
 tools/objtool/builtin-check.c | 10 +---------
 2 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index e6e2d9e5ff48..372c3719f94c 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -64,7 +64,7 @@ objtool_link()
 	local objtoolopt;
 
 	if [ -n "${CONFIG_VMLINUX_VALIDATION}" ]; then
-		objtoolopt="check"
+		objtoolopt="check --vmlinux"
 		if [ -z "${CONFIG_FRAME_POINTER}" ]; then
 			objtoolopt="${objtoolopt} --no-fp"
 		fi
diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c
index 71595cf4946d..eaa06eb18690 100644
--- a/tools/objtool/builtin-check.c
+++ b/tools/objtool/builtin-check.c
@@ -41,18 +41,10 @@ const struct option check_options[] = {
 
 int cmd_check(int argc, const char **argv)
 {
-	const char *objname, *s;
-
 	argc = parse_options(argc, argv, check_options, check_usage, 0);
 
 	if (argc != 1)
 		usage_with_options(check_usage, check_options);
 
-	objname = argv[0];
-
-	s = strstr(objname, "vmlinux.o");
-	if (s && !s[9])
-		vmlinux = true;
-
-	return check(objname, false);
+	return check(argv[0], false);
 }
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 07/28] kbuild: add support for objtool mcount
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (5 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 06/28] objtool: Don't autodetect vmlinux.o Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 21:56     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 08/28] x86, build: use " Sami Tolvanen
                     ` (25 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

This change adds build support for using objtool to generate
__mcount_loc sections.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 Makefile               | 38 ++++++++++++++++++++++++++++++--------
 kernel/trace/Kconfig   |  5 +++++
 scripts/Makefile.build |  9 +++++----
 3 files changed, 40 insertions(+), 12 deletions(-)

diff --git a/Makefile b/Makefile
index ff5e0731d26d..a9dae26c93b5 100644
--- a/Makefile
+++ b/Makefile
@@ -859,17 +859,34 @@ ifdef CONFIG_HAVE_FENTRY
   ifeq ($(call cc-option-yn, -mfentry),y)
     CC_FLAGS_FTRACE	+= -mfentry
     CC_FLAGS_USING	+= -DCC_USING_FENTRY
+    export CC_USING_FENTRY := 1
   endif
 endif
 export CC_FLAGS_FTRACE
-KBUILD_CFLAGS	+= $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING)
-KBUILD_AFLAGS	+= $(CC_FLAGS_USING)
 ifdef CONFIG_DYNAMIC_FTRACE
-	ifdef CONFIG_HAVE_C_RECORDMCOUNT
-		BUILD_C_RECORDMCOUNT := y
-		export BUILD_C_RECORDMCOUNT
-	endif
+  ifndef CC_USING_RECORD_MCOUNT
+  ifndef CC_USING_PATCHABLE_FUNCTION_ENTRY
+    # use objtool or recordmcount to generate mcount tables
+    ifdef CONFIG_HAVE_OBJTOOL_MCOUNT
+      ifdef CC_USING_FENTRY
+        USE_OBJTOOL_MCOUNT := y
+        CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT
+        export USE_OBJTOOL_MCOUNT
+      endif
+    endif
+    ifndef USE_OBJTOOL_MCOUNT
+      USE_RECORDMCOUNT := y
+      export USE_RECORDMCOUNT
+      ifdef CONFIG_HAVE_C_RECORDMCOUNT
+        BUILD_C_RECORDMCOUNT := y
+        export BUILD_C_RECORDMCOUNT
+      endif
+    endif
+  endif
+  endif
 endif
+KBUILD_CFLAGS	+= $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING)
+KBUILD_AFLAGS	+= $(CC_FLAGS_USING)
 endif
 
 # We trigger additional mismatches with less inlining
@@ -1218,11 +1235,16 @@ uapi-asm-generic:
 PHONY += prepare-objtool prepare-resolve_btfids
 prepare-objtool: $(objtool_target)
 ifeq ($(SKIP_STACK_VALIDATION),1)
+objtool-lib-prompt := "please install libelf-dev, libelf-devel or elfutils-libelf-devel"
+ifdef USE_OBJTOOL_MCOUNT
+	@echo "error: Cannot generate __mcount_loc for CONFIG_DYNAMIC_FTRACE=y, $(objtool-lib-prompt)" >&2
+	@false
+endif
 ifdef CONFIG_UNWINDER_ORC
-	@echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
+	@echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, $(objtool-lib-prompt)" >&2
 	@false
 else
-	@echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
+	@echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, $(objtool-lib-prompt)" >&2
 endif
 endif
 
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index a4020c0b4508..b510af5b216c 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -56,6 +56,11 @@ config HAVE_C_RECORDMCOUNT
 	help
 	  C version of recordmcount available?
 
+config HAVE_OBJTOOL_MCOUNT
+	bool
+	help
+	  Arch supports objtool --mcount
+
 config TRACER_MAX_TRACE
 	bool
 
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index a467b9323442..6ecf30c70ced 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -178,8 +178,7 @@ cmd_modversions_c =								\
 	fi
 endif
 
-ifdef CONFIG_FTRACE_MCOUNT_RECORD
-ifndef CC_USING_RECORD_MCOUNT
+ifdef USE_RECORDMCOUNT
 # compiler will not generate __mcount_loc use recordmcount or recordmcount.pl
 ifdef BUILD_C_RECORDMCOUNT
 ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
@@ -206,8 +205,7 @@ recordmcount_source := $(srctree)/scripts/recordmcount.pl
 endif # BUILD_C_RECORDMCOUNT
 cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)),	\
 	$(sub_cmd_record_mcount))
-endif # CC_USING_RECORD_MCOUNT
-endif # CONFIG_FTRACE_MCOUNT_RECORD
+endif # USE_RECORDMCOUNT
 
 ifdef CONFIG_STACK_VALIDATION
 ifneq ($(SKIP_STACK_VALIDATION),1)
@@ -230,6 +228,9 @@ endif
 ifdef CONFIG_X86_SMAP
   objtool_args += --uaccess
 endif
+ifdef USE_OBJTOOL_MCOUNT
+  objtool_args += --mcount
+endif
 
 # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 08/28] x86, build: use objtool mcount
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (6 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 07/28] kbuild: add support for objtool mcount Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 21:58     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 09/28] kbuild: add support for Clang LTO Sami Tolvanen
                     ` (24 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

Select HAVE_OBJTOOL_MCOUNT if STACK_VALIDATION is selected to use
objtool to generate __mcount_loc sections for dynamic ftrace with
Clang and gcc <5.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7101ac64bb20..6de2e5c0bdba 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -163,6 +163,7 @@ config X86
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_CONTEXT_TRACKING		if X86_64
 	select HAVE_C_RECORDMCOUNT
+	select HAVE_OBJTOOL_MCOUNT		if STACK_VALIDATION
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 09/28] kbuild: add support for Clang LTO
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (7 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 08/28] x86, build: use " Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:08     ` Kees Cook
                       ` (3 more replies)
  2020-09-03 20:30   ` [PATCH v2 10/28] kbuild: lto: fix module versioning Sami Tolvanen
                     ` (23 subsequent siblings)
  32 siblings, 4 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

This change adds build system support for Clang's Link Time
Optimization (LTO). With -flto, instead of ELF object files, Clang
produces LLVM bitcode, which is compiled into native code at link
time, allowing the final binary to be optimized globally. For more
details, see:

  https://llvm.org/docs/LinkTimeOptimization.html

The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
which defaults to LTO being disabled. To use LTO, the architecture
must select ARCH_SUPPORTS_LTO_CLANG and support:

  - compiling with Clang,
  - compiling inline assembly with Clang's integrated assembler,
  - and linking with LLD.

While using full LTO results in the best runtime performance, the
compilation is not scalable in time or memory. CONFIG_THINLTO
enables ThinLTO, which allows parallel optimization and faster
incremental builds. ThinLTO is used by default if the architecture
also selects ARCH_SUPPORTS_THINLTO:

  https://clang.llvm.org/docs/ThinLTO.html

To enable LTO, LLVM tools must be used to handle bitcode files. The
easiest way is to pass the LLVM=1 option to make:

  $ make LLVM=1 defconfig
  $ scripts/config -e LTO_CLANG
  $ make LLVM=1

Alternatively, at least the following LLVM tools must be used:

  CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm

To prepare for LTO support with other compilers, common parts are
gated behind the CONFIG_LTO option, and LTO can be disabled for
specific files by filtering out CC_FLAGS_LTO.

Note that support for DYNAMIC_FTRACE and MODVERSIONS are added in
follow-up patches.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 Makefile                          | 18 +++++++-
 arch/Kconfig                      | 68 +++++++++++++++++++++++++++++++
 include/asm-generic/vmlinux.lds.h | 11 +++--
 scripts/Makefile.build            |  9 +++-
 scripts/Makefile.modfinal         |  9 +++-
 scripts/Makefile.modpost          | 24 ++++++++++-
 scripts/link-vmlinux.sh           | 32 +++++++++++----
 7 files changed, 154 insertions(+), 17 deletions(-)

diff --git a/Makefile b/Makefile
index a9dae26c93b5..dd49eaea7c25 100644
--- a/Makefile
+++ b/Makefile
@@ -909,6 +909,22 @@ KBUILD_CFLAGS	+= $(CC_FLAGS_SCS)
 export CC_FLAGS_SCS
 endif
 
+ifdef CONFIG_LTO_CLANG
+ifdef CONFIG_THINLTO
+CC_FLAGS_LTO_CLANG := -flto=thin -fsplit-lto-unit
+KBUILD_LDFLAGS	+= --thinlto-cache-dir=.thinlto-cache
+else
+CC_FLAGS_LTO_CLANG := -flto
+endif
+CC_FLAGS_LTO_CLANG += -fvisibility=default
+endif
+
+ifdef CONFIG_LTO
+CC_FLAGS_LTO	:= $(CC_FLAGS_LTO_CLANG)
+KBUILD_CFLAGS	+= $(CC_FLAGS_LTO)
+export CC_FLAGS_LTO
+endif
+
 ifdef CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B
 KBUILD_CFLAGS += -falign-functions=32
 endif
@@ -1499,7 +1515,7 @@ MRPROPER_FILES += include/config include/generated          \
 		  *.spec
 
 # Directories & files removed with 'make distclean'
-DISTCLEAN_FILES += tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
+DISTCLEAN_FILES += tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS .thinlto-cache
 
 # clean - Delete most, but leave enough to build external modules
 #
diff --git a/arch/Kconfig b/arch/Kconfig
index af14a567b493..11bb2f48dfe8 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -552,6 +552,74 @@ config SHADOW_CALL_STACK
 	  reading and writing arbitrary memory may be able to locate them
 	  and hijack control flow by modifying the stacks.
 
+config LTO
+	bool
+
+config ARCH_SUPPORTS_LTO_CLANG
+	bool
+	help
+	  An architecture should select this option if it supports:
+	  - compiling with Clang,
+	  - compiling inline assembly with Clang's integrated assembler,
+	  - and linking with LLD.
+
+config ARCH_SUPPORTS_THINLTO
+	bool
+	help
+	  An architecture should select this option if it supports Clang's
+	  ThinLTO.
+
+config THINLTO
+	bool "Clang ThinLTO"
+	depends on LTO_CLANG && ARCH_SUPPORTS_THINLTO
+	default y
+	help
+	  This option enables Clang's ThinLTO, which allows for parallel
+	  optimization and faster incremental compiles. More information
+	  can be found from Clang's documentation:
+
+	    https://clang.llvm.org/docs/ThinLTO.html
+
+choice
+	prompt "Link Time Optimization (LTO)"
+	default LTO_NONE
+	help
+	  This option enables Link Time Optimization (LTO), which allows the
+	  compiler to optimize binaries globally.
+
+	  If unsure, select LTO_NONE.
+
+config LTO_NONE
+	bool "None"
+
+config LTO_CLANG
+	bool "Clang's Link Time Optimization (EXPERIMENTAL)"
+	# Clang >= 11: https://github.com/ClangBuiltLinux/linux/issues/510
+	depends on CC_IS_CLANG && CLANG_VERSION >= 110000 && LD_IS_LLD
+	depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
+	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
+	depends on ARCH_SUPPORTS_LTO_CLANG
+	depends on !FTRACE_MCOUNT_RECORD
+	depends on !KASAN
+	depends on !GCOV_KERNEL
+	depends on !MODVERSIONS
+	select LTO
+	help
+          This option enables Clang's Link Time Optimization (LTO), which
+          allows the compiler to optimize the kernel globally. If you enable
+          this option, the compiler generates LLVM bitcode instead of ELF
+          object files, and the actual compilation from bitcode happens at
+          the LTO link step, which may take several minutes depending on the
+          kernel configuration. More information can be found from LLVM's
+          documentation:
+
+	    https://llvm.org/docs/LinkTimeOptimization.html
+
+	  To select this option, you also need to use LLVM tools to handle
+	  the bitcode by passing LLVM=1 to make.
+
+endchoice
+
 config HAVE_ARCH_WITHIN_STACK_FRAMES
 	bool
 	help
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 5430febd34be..c1f0d58272bd 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -89,15 +89,18 @@
  * .data. We don't want to pull in .data..other sections, which Linux
  * has defined. Same for text and bss.
  *
+ * With LTO_CLANG, the linker also splits sections by default, so we need
+ * these macros to combine the sections during the final link.
+ *
  * RODATA_MAIN is not used because existing code already defines .rodata.x
  * sections to be brought in with rodata.
  */
-#ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
+#if defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || defined(CONFIG_LTO_CLANG)
 #define TEXT_MAIN .text .text.[0-9a-zA-Z_]*
-#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..LPBX*
+#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..L* .data..compoundliteral*
 #define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]*
-#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]*
-#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]*
+#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]* .rodata..L*
+#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]* .bss..compoundliteral*
 #define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]*
 #else
 #define TEXT_MAIN .text
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 6ecf30c70ced..a5f4b5d407e6 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -111,7 +111,7 @@ endif
 # ---------------------------------------------------------------------------
 
 quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
-      cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS), $(c_flags)) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
+      cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS) $(CC_FLAGS_LTO), $(c_flags)) -fverbose-asm -S -o $@ $<
 
 $(obj)/%.s: $(src)/%.c FORCE
 	$(call if_changed_dep,cc_s_c)
@@ -428,8 +428,15 @@ $(obj)/lib.a: $(lib-y) FORCE
 # Do not replace $(filter %.o,^) with $(real-prereqs). When a single object
 # module is turned into a multi object module, $^ will contain header file
 # dependencies recorded in the .*.cmd file.
+ifdef CONFIG_LTO_CLANG
+quiet_cmd_link_multi-m = AR [M]  $@
+cmd_link_multi-m =						\
+	rm -f $@; 						\
+	$(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(filter %.o,$^)
+else
 quiet_cmd_link_multi-m = LD [M]  $@
       cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^)
+endif
 
 $(multi-used-m): FORCE
 	$(call if_changed,link_multi-m)
diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index 411c1e600e7d..1005b147abd0 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -6,6 +6,7 @@
 PHONY := __modfinal
 __modfinal:
 
+include $(objtree)/include/config/auto.conf
 include $(srctree)/scripts/Kbuild.include
 
 # for c_flags
@@ -29,6 +30,12 @@ quiet_cmd_cc_o_c = CC [M]  $@
 
 ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
 
+ifdef CONFIG_LTO_CLANG
+# With CONFIG_LTO_CLANG, reuse the object file we compiled for modpost to
+# avoid a second slow LTO link
+prelink-ext := .lto
+endif
+
 quiet_cmd_ld_ko_o = LD [M]  $@
       cmd_ld_ko_o =                                                     \
 	$(LD) -r $(KBUILD_LDFLAGS)					\
@@ -37,7 +44,7 @@ quiet_cmd_ld_ko_o = LD [M]  $@
 		-o $@ $(filter %.o, $^);				\
 	$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
 
-$(modules): %.ko: %.o %.mod.o $(KBUILD_LDS_MODULE) FORCE
+$(modules): %.ko: %$(prelink-ext).o %.mod.o $(KBUILD_LDS_MODULE) FORCE
 	+$(call if_changed,ld_ko_o)
 
 targets += $(modules) $(modules:.ko=.mod.o)
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index f54b6ac37ac2..a70f1f7da6aa 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -102,12 +102,32 @@ $(input-symdump):
 	@echo >&2 'WARNING: Symbol version dump "$@" is missing.'
 	@echo >&2 '         Modules may not have dependencies or modversions.'
 
+ifdef CONFIG_LTO_CLANG
+# With CONFIG_LTO_CLANG, .o files might be LLVM bitcode, so we need to run
+# LTO to compile them into native code before running modpost
+prelink-ext = .lto
+
+quiet_cmd_cc_lto_link_modules = LTO [M] $@
+cmd_cc_lto_link_modules =						\
+	$(LD) $(ld_flags) -r -o $@					\
+		--whole-archive $(filter-out FORCE,$^)
+
+%.lto.o: %.o FORCE
+	$(call if_changed,cc_lto_link_modules)
+
+PHONY += FORCE
+FORCE:
+
+endif
+
+modules := $(sort $(shell cat $(MODORDER)))
+
 # Read out modules.order to pass in modpost.
 # Otherwise, allmodconfig would fail with "Argument list too long".
 quiet_cmd_modpost = MODPOST $@
-      cmd_modpost = sed 's/ko$$/o/' $< | $(MODPOST) -T -
+      cmd_modpost = sed 's/\.ko$$/$(prelink-ext)\.o/' $< | $(MODPOST) -T -
 
-$(output-symdump): $(MODORDER) $(input-symdump) FORCE
+$(output-symdump): $(MODORDER) $(input-symdump) $(modules:.ko=$(prelink-ext).o) FORCE
 	$(call if_changed,modpost)
 
 targets += $(output-symdump)
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 372c3719f94c..ebb9f912aab6 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -56,6 +56,14 @@ modpost_link()
 		${KBUILD_VMLINUX_LIBS}				\
 		--end-group"
 
+	if [ -n "${CONFIG_LTO_CLANG}" ]; then
+		# This might take a while, so indicate that we're doing
+		# an LTO link
+		info LTO ${1}
+	else
+		info LD ${1}
+	fi
+
 	${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${objects}
 }
 
@@ -103,13 +111,22 @@ vmlinux_link()
 	fi
 
 	if [ "${SRCARCH}" != "um" ]; then
-		objects="--whole-archive			\
-			${KBUILD_VMLINUX_OBJS}			\
-			--no-whole-archive			\
-			--start-group				\
-			${KBUILD_VMLINUX_LIBS}			\
-			--end-group				\
-			${@}"
+		if [ -n "${CONFIG_LTO_CLANG}" ]; then
+			# Use vmlinux.o instead of performing the slow LTO
+			# link again.
+			objects="--whole-archive		\
+				vmlinux.o 			\
+				--no-whole-archive		\
+				${@}"
+		else
+			objects="--whole-archive		\
+				${KBUILD_VMLINUX_OBJS}		\
+				--no-whole-archive		\
+				--start-group			\
+				${KBUILD_VMLINUX_LIBS}		\
+				--end-group			\
+				${@}"
+		fi
 
 		${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux}	\
 			${strip_debug#-Wl,}			\
@@ -274,7 +291,6 @@ fi;
 ${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1
 
 #link vmlinux.o
-info LD vmlinux.o
 modpost_link vmlinux.o
 objtool_link vmlinux.o
 
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 10/28] kbuild: lto: fix module versioning
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (8 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 09/28] kbuild: add support for Clang LTO Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:11     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 11/28] kbuild: lto: postpone objtool Sami Tolvanen
                     ` (22 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 .gitignore               |  1 +
 Makefile                 |  3 ++-
 arch/Kconfig             |  1 -
 scripts/Makefile.build   | 33 +++++++++++++++++++++++++++++++--
 scripts/Makefile.modpost |  2 ++
 scripts/link-vmlinux.sh  | 25 ++++++++++++++++++++++++-
 6 files changed, 60 insertions(+), 5 deletions(-)

diff --git a/.gitignore b/.gitignore
index 162bd2b67bdf..06e76dc39ffe 100644
--- a/.gitignore
+++ b/.gitignore
@@ -41,6 +41,7 @@
 *.so.dbg
 *.su
 *.symtypes
+*.symversions
 *.tab.[ch]
 *.tar
 *.xz
diff --git a/Makefile b/Makefile
index dd49eaea7c25..2752be67b460 100644
--- a/Makefile
+++ b/Makefile
@@ -1847,7 +1847,8 @@ clean: $(clean-dirs)
 		-o -name '.tmp_*.o.*' \
 		-o -name '*.c.[012]*.*' \
 		-o -name '*.ll' \
-		-o -name '*.gcno' \) -type f -print | xargs rm -f
+		-o -name '*.gcno' \
+		-o -name '*.*.symversions' \) -type f -print | xargs rm -f
 
 # Generate tags for editors
 # ---------------------------------------------------------------------------
diff --git a/arch/Kconfig b/arch/Kconfig
index 11bb2f48dfe8..71392e4a8900 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -602,7 +602,6 @@ config LTO_CLANG
 	depends on !FTRACE_MCOUNT_RECORD
 	depends on !KASAN
 	depends on !GCOV_KERNEL
-	depends on !MODVERSIONS
 	select LTO
 	help
           This option enables Clang's Link Time Optimization (LTO), which
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index a5f4b5d407e6..c348e6d6b436 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -166,6 +166,15 @@ ifdef CONFIG_MODVERSIONS
 #   the actual value of the checksum generated by genksyms
 # o remove .tmp_<file>.o to <file>.o
 
+ifdef CONFIG_LTO_CLANG
+# Generate .o.symversions files for each .o with exported symbols, and link these
+# to the kernel and/or modules at the end.
+cmd_modversions_c =								\
+	if $(NM) $@ 2>/dev/null | grep -q __ksymtab; then			\
+		$(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
+		    > $@.symversions;						\
+	fi;
+else
 cmd_modversions_c =								\
 	if $(OBJDUMP) -h $@ | grep -q __ksymtab; then				\
 		$(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
@@ -177,6 +186,7 @@ cmd_modversions_c =								\
 		rm -f $(@D)/.tmp_$(@F:.o=.ver);					\
 	fi
 endif
+endif
 
 ifdef USE_RECORDMCOUNT
 # compiler will not generate __mcount_loc use recordmcount or recordmcount.pl
@@ -393,6 +403,18 @@ $(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
 $(subdir-builtin): $(obj)/%/built-in.a: $(obj)/% ;
 $(subdir-modorder): $(obj)/%/modules.order: $(obj)/% ;
 
+# combine symversions for later processing
+quiet_cmd_update_lto_symversions = SYMVER  $@
+ifeq ($(CONFIG_LTO_CLANG) $(CONFIG_MODVERSIONS),y y)
+      cmd_update_lto_symversions =					\
+	rm -f $@.symversions						\
+	$(foreach n, $(filter-out FORCE,$^),				\
+		$(if $(wildcard $(n).symversions),			\
+			; cat $(n).symversions >> $@.symversions))
+else
+      cmd_update_lto_symversions = echo >/dev/null
+endif
+
 #
 # Rule to compile a set of .o files into one .a file (without symbol table)
 #
@@ -400,8 +422,11 @@ $(subdir-modorder): $(obj)/%/modules.order: $(obj)/% ;
 quiet_cmd_ar_builtin = AR      $@
       cmd_ar_builtin = rm -f $@; $(AR) cDPrST $@ $(real-prereqs)
 
+quiet_cmd_ar_and_symver = AR      $@
+      cmd_ar_and_symver = $(cmd_update_lto_symversions); $(cmd_ar_builtin)
+
 $(obj)/built-in.a: $(real-obj-y) FORCE
-	$(call if_changed,ar_builtin)
+	$(call if_changed,ar_and_symver)
 
 #
 # Rule to create modules.order file
@@ -421,8 +446,11 @@ $(obj)/modules.order: $(obj-m) FORCE
 #
 # Rule to compile a set of .o files into one .a file (with symbol table)
 #
+quiet_cmd_ar_lib = AR      $@
+      cmd_ar_lib = $(cmd_update_lto_symversions); $(cmd_ar)
+
 $(obj)/lib.a: $(lib-y) FORCE
-	$(call if_changed,ar)
+	$(call if_changed,ar_lib)
 
 # NOTE:
 # Do not replace $(filter %.o,^) with $(real-prereqs). When a single object
@@ -431,6 +459,7 @@ $(obj)/lib.a: $(lib-y) FORCE
 ifdef CONFIG_LTO_CLANG
 quiet_cmd_link_multi-m = AR [M]  $@
 cmd_link_multi-m =						\
+	$(cmd_update_lto_symversions);				\
 	rm -f $@; 						\
 	$(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(filter %.o,$^)
 else
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index a70f1f7da6aa..f9718bf4172d 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -110,6 +110,8 @@ prelink-ext = .lto
 quiet_cmd_cc_lto_link_modules = LTO [M] $@
 cmd_cc_lto_link_modules =						\
 	$(LD) $(ld_flags) -r -o $@					\
+		$(shell [ -s $(@:.lto.o=.o.symversions) ] &&		\
+			echo -T $(@:.lto.o=.o.symversions))		\
 		--whole-archive $(filter-out FORCE,$^)
 
 %.lto.o: %.o FORCE
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index ebb9f912aab6..3e99a19b9195 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -43,11 +43,28 @@ info()
 	fi
 }
 
+# If CONFIG_LTO_CLANG is selected, collect generated symbol versions into
+# .tmp_symversions.lds
+gen_symversions()
+{
+	info GEN .tmp_symversions.lds
+	rm -f .tmp_symversions.lds
+
+	for a in ${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS}; do
+		for o in $(${AR} t $a 2>/dev/null); do
+			if [ -f ${o}.symversions ]; then
+				cat ${o}.symversions >> .tmp_symversions.lds
+			fi
+		done
+	done
+}
+
 # Link of vmlinux.o used for section mismatch analysis
 # ${1} output file
 modpost_link()
 {
 	local objects
+	local lds=""
 
 	objects="--whole-archive				\
 		${KBUILD_VMLINUX_OBJS}				\
@@ -57,6 +74,11 @@ modpost_link()
 		--end-group"
 
 	if [ -n "${CONFIG_LTO_CLANG}" ]; then
+		if [ -n "${CONFIG_MODVERSIONS}" ]; then
+			gen_symversions
+			lds="${lds} -T .tmp_symversions.lds"
+		fi
+
 		# This might take a while, so indicate that we're doing
 		# an LTO link
 		info LTO ${1}
@@ -64,7 +86,7 @@ modpost_link()
 		info LD ${1}
 	fi
 
-	${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${objects}
+	${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${lds} ${objects}
 }
 
 objtool_link()
@@ -242,6 +264,7 @@ cleanup()
 {
 	rm -f .btf.*
 	rm -f .tmp_System.map
+	rm -f .tmp_symversions.lds
 	rm -f .tmp_vmlinux*
 	rm -f System.map
 	rm -f vmlinux
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 11/28] kbuild: lto: postpone objtool
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (9 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 10/28] kbuild: lto: fix module versioning Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:19     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 12/28] kbuild: lto: limit inlining Sami Tolvanen
                     ` (21 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With LTO, LLVM bitcode won't be compiled into native code until
modpost_link, or modfinal for modules. This change postpones calls
to objtool until after these steps.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/Kconfig              |  2 +-
 scripts/Makefile.build    |  2 ++
 scripts/Makefile.modfinal | 24 ++++++++++++++++++++++--
 scripts/link-vmlinux.sh   | 23 ++++++++++++++++++++++-
 4 files changed, 47 insertions(+), 4 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index 71392e4a8900..7a418907e686 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -599,7 +599,7 @@ config LTO_CLANG
 	depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
 	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
 	depends on ARCH_SUPPORTS_LTO_CLANG
-	depends on !FTRACE_MCOUNT_RECORD
+	depends on HAVE_OBJTOOL_MCOUNT || !(X86_64 && DYNAMIC_FTRACE)
 	depends on !KASAN
 	depends on !GCOV_KERNEL
 	select LTO
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index c348e6d6b436..b8f1f0d65a73 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -218,6 +218,7 @@ cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)),
 endif # USE_RECORDMCOUNT
 
 ifdef CONFIG_STACK_VALIDATION
+ifndef CONFIG_LTO_CLANG
 ifneq ($(SKIP_STACK_VALIDATION),1)
 
 __objtool_obj := $(objtree)/tools/objtool/objtool
@@ -253,6 +254,7 @@ objtool_obj = $(if $(patsubst y%,, \
 	$(__objtool_obj))
 
 endif # SKIP_STACK_VALIDATION
+endif # CONFIG_LTO_CLANG
 endif # CONFIG_STACK_VALIDATION
 
 # Rebuild all objects when objtool changes, or is enabled/disabled.
diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index 1005b147abd0..909bd509edb4 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -34,10 +34,30 @@ ifdef CONFIG_LTO_CLANG
 # With CONFIG_LTO_CLANG, reuse the object file we compiled for modpost to
 # avoid a second slow LTO link
 prelink-ext := .lto
-endif
+
+# ELF processing was skipped earlier because we didn't have native code,
+# so let's now process the prelinked binary before we link the module.
+
+ifdef CONFIG_STACK_VALIDATION
+ifneq ($(SKIP_STACK_VALIDATION),1)
+cmd_ld_ko_o +=								\
+	$(objtree)/tools/objtool/objtool				\
+		$(if $(CONFIG_UNWINDER_ORC),orc generate,check)		\
+		--module						\
+		$(if $(CONFIG_FRAME_POINTER),,--no-fp)			\
+		$(if $(CONFIG_GCOV_KERNEL),--no-unreachable,)		\
+		$(if $(CONFIG_RETPOLINE),--retpoline,)			\
+		$(if $(CONFIG_X86_SMAP),--uaccess,)			\
+		$(if $(USE_OBJTOOL_MCOUNT),--mcount,)			\
+		$(@:.ko=$(prelink-ext).o);
+
+endif # SKIP_STACK_VALIDATION
+endif # CONFIG_STACK_VALIDATION
+
+endif # CONFIG_LTO_CLANG
 
 quiet_cmd_ld_ko_o = LD [M]  $@
-      cmd_ld_ko_o =                                                     \
+      cmd_ld_ko_o +=                                                     \
 	$(LD) -r $(KBUILD_LDFLAGS)					\
 		$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)		\
 		$(addprefix -T , $(KBUILD_LDS_MODULE))			\
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 3e99a19b9195..a352a5ad9ef7 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -93,8 +93,29 @@ objtool_link()
 {
 	local objtoolopt;
 
+	if [ "${CONFIG_LTO_CLANG} ${CONFIG_STACK_VALIDATION}" = "y y" ]; then
+		# Don't perform vmlinux validation unless explicitly requested,
+		# but run objtool on vmlinux.o now that we have an object file.
+		if [ -n "${CONFIG_UNWINDER_ORC}" ]; then
+			objtoolopt="orc generate"
+		else
+			objtoolopt="check"
+		fi
+
+		if [ -n ${USE_OBJTOOL_MCOUNT} ]; then
+			objtoolopt="${objtoolopt} --mcount"
+		fi
+	fi
+
 	if [ -n "${CONFIG_VMLINUX_VALIDATION}" ]; then
-		objtoolopt="check --vmlinux"
+		if [ -z "${objtoolopt}" ]; then
+			objtoolopt="check --vmlinux"
+		else
+			objtoolopt="${objtoolopt} --vmlinux"
+		fi
+	fi
+
+	if [ -n "${objtoolopt}" ]; then
 		if [ -z "${CONFIG_FRAME_POINTER}" ]; then
 			objtoolopt="${objtoolopt} --no-fp"
 		fi
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 12/28] kbuild: lto: limit inlining
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (10 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 11/28] kbuild: lto: postpone objtool Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:20     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 13/28] kbuild: lto: merge module sections Sami Tolvanen
                     ` (20 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

This change limits function inlining across translation unit boundaries
in order to reduce the binary size with LTO. The -import-instr-limit
flag defines a size limit, as the number of LLVM IR instructions, for
importing functions from other TUs, defaulting to 100.

Based on testing with arm64 defconfig, we found that a limit of 5 is a
reasonable compromise between performance and binary size, reducing the
size of a stripped vmlinux by 11%.

Suggested-by: George Burgess IV <gbiv@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 Makefile | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Makefile b/Makefile
index 2752be67b460..c69e07bd506a 100644
--- a/Makefile
+++ b/Makefile
@@ -917,6 +917,10 @@ else
 CC_FLAGS_LTO_CLANG := -flto
 endif
 CC_FLAGS_LTO_CLANG += -fvisibility=default
+
+# Limit inlining across translation units to reduce binary size
+LD_FLAGS_LTO_CLANG := -mllvm -import-instr-limit=5
+KBUILD_LDFLAGS += $(LD_FLAGS_LTO_CLANG)
 endif
 
 ifdef CONFIG_LTO
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 13/28] kbuild: lto: merge module sections
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (11 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 12/28] kbuild: lto: limit inlining Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:23     ` Kees Cook
  2020-09-07 15:25     ` Masahiro Yamada
  2020-09-03 20:30   ` [PATCH v2 14/28] kbuild: lto: remove duplicate dependencies from .mod files Sami Tolvanen
                     ` (19 subsequent siblings)
  32 siblings, 2 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

LLD always splits sections with LTO, which increases module sizes. This
change adds a linker script that merges the split sections in the final
module.

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 Makefile               |  2 ++
 scripts/module-lto.lds | 26 ++++++++++++++++++++++++++
 2 files changed, 28 insertions(+)
 create mode 100644 scripts/module-lto.lds

diff --git a/Makefile b/Makefile
index c69e07bd506a..bb82a4323f1d 100644
--- a/Makefile
+++ b/Makefile
@@ -921,6 +921,8 @@ CC_FLAGS_LTO_CLANG += -fvisibility=default
 # Limit inlining across translation units to reduce binary size
 LD_FLAGS_LTO_CLANG := -mllvm -import-instr-limit=5
 KBUILD_LDFLAGS += $(LD_FLAGS_LTO_CLANG)
+
+KBUILD_LDS_MODULE += $(srctree)/scripts/module-lto.lds
 endif
 
 ifdef CONFIG_LTO
diff --git a/scripts/module-lto.lds b/scripts/module-lto.lds
new file mode 100644
index 000000000000..cbb11dc3639a
--- /dev/null
+++ b/scripts/module-lto.lds
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * With CONFIG_LTO_CLANG, LLD always enables -fdata-sections and
+ * -ffunction-sections, which increases the size of the final module.
+ * Merge the split sections in the final binary.
+ */
+SECTIONS {
+	__patchable_function_entries : { *(__patchable_function_entries) }
+
+	.bss : {
+		*(.bss .bss.[0-9a-zA-Z_]*)
+		*(.bss..L*)
+	}
+
+	.data : {
+		*(.data .data.[0-9a-zA-Z_]*)
+		*(.data..L*)
+	}
+
+	.rodata : {
+		*(.rodata .rodata.[0-9a-zA-Z_]*)
+		*(.rodata..L*)
+	}
+
+	.text : { *(.text .text.[0-9a-zA-Z_]*) }
+}
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 14/28] kbuild: lto: remove duplicate dependencies from .mod files
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (12 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 13/28] kbuild: lto: merge module sections Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:29     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 15/28] init: lto: ensure initcall ordering Sami Tolvanen
                     ` (18 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With LTO, llvm-nm prints out symbols for each archive member
separately, which results in a lot of duplicate dependencies in the
.mod file when CONFIG_TRIM_UNUSED_SYMS is enabled. When a module
consists of several compilation units, the output can exceed the
default xargs command size limit and split the dependency list to
multiple lines, which results in used symbols getting trimmed.

This change removes duplicate dependencies, which will reduce the
probability of this happening and makes .mod files smaller and
easier to read.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 scripts/Makefile.build | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index b8f1f0d65a73..3bb36b4b853c 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -286,7 +286,7 @@ endef
 
 # List module undefined symbols (or empty line if not enabled)
 ifdef CONFIG_TRIM_UNUSED_KSYMS
-cmd_undef_syms = $(NM) $< | sed -n 's/^  *U //p' | xargs echo
+cmd_undef_syms = $(NM) $< | sed -n 's/^  *U //p' | sort -u | xargs echo
 else
 cmd_undef_syms = echo
 endif
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 15/28] init: lto: ensure initcall ordering
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (13 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 14/28] kbuild: lto: remove duplicate dependencies from .mod files Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:40     ` Kees Cook
  2020-09-10  9:25     ` David Woodhouse
  2020-09-03 20:30   ` [PATCH v2 16/28] init: lto: fix PREL32 relocations Sami Tolvanen
                     ` (17 subsequent siblings)
  32 siblings, 2 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With LTO, the compiler doesn't necessarily obey the link order for
initcalls, and initcall variables need globally unique names to avoid
collisions at link time.

This change exports __KBUILD_MODNAME and adds the initcall_id() macro,
which uses it together with __COUNTER__ and __LINE__ to help ensure
these variables have unique names, and moves each variable to its own
section when LTO is enabled, so the correct order can be specified using
a linker script.

The generate_initcall_ordering.pl script uses nm to find initcalls from
the object files passed to the linker, and generates a linker script
that specifies the intended order. With LTO, the script is called in
link-vmlinux.sh.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 include/linux/init.h               |  52 +++++-
 scripts/Makefile.lib               |   6 +-
 scripts/generate_initcall_order.pl | 270 +++++++++++++++++++++++++++++
 scripts/link-vmlinux.sh            |  14 ++
 4 files changed, 333 insertions(+), 9 deletions(-)
 create mode 100755 scripts/generate_initcall_order.pl

diff --git a/include/linux/init.h b/include/linux/init.h
index 212fc9e2f691..af638cd6dd52 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -184,19 +184,57 @@ extern bool initcall_debug;
  * as KEEP() in the linker script.
  */
 
+/* Format: <modname>__<counter>_<line>_<fn> */
+#define __initcall_id(fn)					\
+	__PASTE(__KBUILD_MODNAME,				\
+	__PASTE(__,						\
+	__PASTE(__COUNTER__,					\
+	__PASTE(_,						\
+	__PASTE(__LINE__,					\
+	__PASTE(_, fn))))))
+
+/* Format: __<prefix>__<iid><id> */
+#define __initcall_name(prefix, __iid, id)			\
+	__PASTE(__,						\
+	__PASTE(prefix,						\
+	__PASTE(__,						\
+	__PASTE(__iid, id))))
+
+#ifdef CONFIG_LTO_CLANG
+/*
+ * With LTO, the compiler doesn't necessarily obey link order for
+ * initcalls. In order to preserve the correct order, we add each
+ * variable into its own section and generate a linker script (in
+ * scripts/link-vmlinux.sh) to specify the order of the sections.
+ */
+#define __initcall_section(__sec, __iid)			\
+	#__sec ".init.." #__iid
+#else
+#define __initcall_section(__sec, __iid)			\
+	#__sec ".init"
+#endif
+
 #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
-#define ___define_initcall(fn, id, __sec)			\
+#define ____define_initcall(fn, __name, __sec)			\
 	__ADDRESSABLE(fn)					\
-	asm(".section	\"" #__sec ".init\", \"a\"	\n"	\
-	"__initcall_" #fn #id ":			\n"	\
+	asm(".section	\"" __sec "\", \"a\"		\n"	\
+	    __stringify(__name) ":			\n"	\
 	    ".long	" #fn " - .			\n"	\
 	    ".previous					\n");
 #else
-#define ___define_initcall(fn, id, __sec) \
-	static initcall_t __initcall_##fn##id __used \
-		__attribute__((__section__(#__sec ".init"))) = fn;
+#define ____define_initcall(fn, __name, __sec)			\
+	static initcall_t __name __used 			\
+		__attribute__((__section__(__sec))) = fn;
 #endif
 
+#define __unique_initcall(fn, id, __sec, __iid)			\
+	____define_initcall(fn,					\
+		__initcall_name(initcall, __iid, id),		\
+		__initcall_section(__sec, __iid))
+
+#define ___define_initcall(fn, id, __sec)			\
+	__unique_initcall(fn, id, __sec, __initcall_id(fn))
+
 #define __define_initcall(fn, id) ___define_initcall(fn, id, .initcall##id)
 
 /*
@@ -236,7 +274,7 @@ extern bool initcall_debug;
 #define __exitcall(fn)						\
 	static exitcall_t __exitcall_##fn __exit_call = fn
 
-#define console_initcall(fn)	___define_initcall(fn,, .con_initcall)
+#define console_initcall(fn)	___define_initcall(fn, con, .con_initcall)
 
 struct obs_kernel_param {
 	const char *str;
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 3d599716940c..7e382d12d309 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -117,9 +117,11 @@ target-stem = $(basename $(patsubst $(obj)/%,%,$@))
 # These flags are needed for modversions and compiling, so we define them here
 # $(modname_flags) defines KBUILD_MODNAME as the name of the module it will
 # end up in (or would, if it gets compiled in)
-name-fix = $(call stringify,$(subst $(comma),_,$(subst -,_,$1)))
+name-fix-token = $(subst $(comma),_,$(subst -,_,$1))
+name-fix = $(call stringify,$(call name-fix-token,$1))
 basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
-modname_flags  = -DKBUILD_MODNAME=$(call name-fix,$(modname))
+modname_flags  = -DKBUILD_MODNAME=$(call name-fix,$(modname)) \
+		 -D__KBUILD_MODNAME=kmod_$(call name-fix-token,$(modname))
 modfile_flags  = -DKBUILD_MODFILE=$(call stringify,$(modfile))
 
 _c_flags       = $(filter-out $(CFLAGS_REMOVE_$(target-stem).o), \
diff --git a/scripts/generate_initcall_order.pl b/scripts/generate_initcall_order.pl
new file mode 100755
index 000000000000..fe83aec2b51e
--- /dev/null
+++ b/scripts/generate_initcall_order.pl
@@ -0,0 +1,270 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+#
+# Generates a linker script that specifies the correct initcall order.
+#
+# Copyright (C) 2019 Google LLC
+
+use strict;
+use warnings;
+use IO::Handle;
+use IO::Select;
+use POSIX ":sys_wait_h";
+
+my $nm = $ENV{'NM'} || die "$0: ERROR: NM not set?";
+my $objtree = $ENV{'objtree'} || '.';
+
+## currently active child processes
+my $jobs = {};		# child process pid -> file handle
+## results from child processes
+my $results = {};	# object index -> [ { level, secname }, ... ]
+
+## reads _NPROCESSORS_ONLN to determine the maximum number of processes to
+## start
+sub get_online_processors {
+	open(my $fh, "getconf _NPROCESSORS_ONLN 2>/dev/null |")
+		or die "$0: ERROR: failed to execute getconf: $!";
+	my $procs = <$fh>;
+	close($fh);
+
+	if (!($procs =~ /^\d+$/)) {
+		return 1;
+	}
+
+	return int($procs);
+}
+
+## writes results to the parent process
+## format: <file index> <initcall level> <base initcall section name>
+sub write_results {
+	my ($index, $initcalls) = @_;
+
+	# sort by the counter value to ensure the order of initcalls within
+	# each object file is correct
+	foreach my $counter (sort { $a <=> $b } keys(%{$initcalls})) {
+		my $level = $initcalls->{$counter}->{'level'};
+
+		# section name for the initcall function
+		my $secname = $initcalls->{$counter}->{'module'} . '__' .
+			      $counter . '_' .
+			      $initcalls->{$counter}->{'line'} . '_' .
+			      $initcalls->{$counter}->{'function'};
+
+		print "$index $level $secname\n";
+	}
+}
+
+## reads a result line from a child process and adds it to the $results array
+sub read_results{
+	my ($fh) = @_;
+
+	# each child prints out a full line w/ autoflush and exits after the
+	# last line, so even if buffered I/O blocks here, it shouldn't block
+	# very long
+	my $data = <$fh>;
+
+	if (!defined($data)) {
+		return 0;
+	}
+
+	chomp($data);
+
+	my ($index, $level, $secname) = $data =~
+		/^(\d+)\ ([^\ ]+)\ (.*)$/;
+
+	if (!defined($index) ||
+		!defined($level) ||
+		!defined($secname)) {
+		die "$0: ERROR: child process returned invalid data: $data\n";
+	}
+
+	$index = int($index);
+
+	if (!exists($results->{$index})) {
+		$results->{$index} = [];
+	}
+
+	push (@{$results->{$index}}, {
+		'level'   => $level,
+		'secname' => $secname
+	});
+
+	return 1;
+}
+
+## finds initcalls from an object file or all object files in an archive, and
+## writes results back to the parent process
+sub find_initcalls {
+	my ($index, $file) = @_;
+
+	die "$0: ERROR: file $file doesn't exist?" if (! -f $file);
+
+	open(my $fh, "\"$nm\" --defined-only \"$file\" 2>/dev/null |")
+		or die "$0: ERROR: failed to execute \"$nm\": $!";
+
+	my $initcalls = {};
+
+	while (<$fh>) {
+		chomp;
+
+		# check for the start of a new object file (if processing an
+		# archive)
+		my ($path)= $_ =~ /^(.+)\:$/;
+
+		if (defined($path)) {
+			write_results($index, $initcalls);
+			$initcalls = {};
+			next;
+		}
+
+		# look for an initcall
+		my ($module, $counter, $line, $symbol) = $_ =~
+			/[a-z]\s+__initcall__(\S*)__(\d+)_(\d+)_(.*)$/;
+
+		if (!defined($module)) {
+			$module = ''
+		}
+
+		if (!defined($counter) ||
+			!defined($line) ||
+			!defined($symbol)) {
+			next;
+		}
+
+		# parse initcall level
+		my ($function, $level) = $symbol =~
+			/^(.*)((early|rootfs|con|[0-9])s?)$/;
+
+		die "$0: ERROR: invalid initcall name $symbol in $file($path)"
+			if (!defined($function) || !defined($level));
+
+		$initcalls->{$counter} = {
+			'module'   => $module,
+			'line'     => $line,
+			'function' => $function,
+			'level'    => $level,
+		};
+	}
+
+	close($fh);
+	write_results($index, $initcalls);
+}
+
+## waits for any child process to complete, reads the results, and adds them to
+## the $results array for later processing
+sub wait_for_results {
+	my ($select) = @_;
+
+	my $pid = 0;
+	do {
+		# unblock children that may have a full write buffer
+		foreach my $fh ($select->can_read(0)) {
+			read_results($fh);
+		}
+
+		# check for children that have exited, read the remaining data
+		# from them, and clean up
+		$pid = waitpid(-1, WNOHANG);
+		if ($pid > 0) {
+			if (!exists($jobs->{$pid})) {
+				next;
+			}
+
+			my $fh = $jobs->{$pid};
+			$select->remove($fh);
+
+			while (read_results($fh)) {
+				# until eof
+			}
+
+			close($fh);
+			delete($jobs->{$pid});
+		}
+	} while ($pid > 0);
+}
+
+## forks a child to process each file passed in the command line and collects
+## the results
+sub process_files {
+	my $index = 0;
+	my $njobs = get_online_processors();
+	my $select = IO::Select->new();
+
+	while (my $file = shift(@ARGV)) {
+		# fork a child process and read it's stdout
+		my $pid = open(my $fh, '-|');
+
+		if (!defined($pid)) {
+			die "$0: ERROR: failed to fork: $!";
+		} elsif ($pid) {
+			# save the child process pid and the file handle
+			$select->add($fh);
+			$jobs->{$pid} = $fh;
+		} else {
+			# in the child process
+			STDOUT->autoflush(1);
+			find_initcalls($index, "$objtree/$file");
+			exit;
+		}
+
+		$index++;
+
+		# limit the number of children to $njobs
+		if (scalar(keys(%{$jobs})) >= $njobs) {
+			wait_for_results($select);
+		}
+	}
+
+	# wait for the remaining children to complete
+	while (scalar(keys(%{$jobs})) > 0) {
+		wait_for_results($select);
+	}
+}
+
+sub generate_initcall_lds() {
+	process_files();
+
+	my $sections = {};	# level -> [ secname, ...]
+
+	# sort results to retain link order and split to sections per
+	# initcall level
+	foreach my $index (sort { $a <=> $b } keys(%{$results})) {
+		foreach my $result (@{$results->{$index}}) {
+			my $level = $result->{'level'};
+
+			if (!exists($sections->{$level})) {
+				$sections->{$level} = [];
+			}
+
+			push(@{$sections->{$level}}, $result->{'secname'});
+		}
+	}
+
+	die "$0: ERROR: no initcalls?" if (!keys(%{$sections}));
+
+	# print out a linker script that defines the order of initcalls for
+	# each level
+	print "SECTIONS {\n";
+
+	foreach my $level (sort(keys(%{$sections}))) {
+		my $section;
+
+		if ($level eq 'con') {
+			$section = '.con_initcall.init';
+		} else {
+			$section = ".initcall${level}.init";
+		}
+
+		print "\t${section} : {\n";
+
+		foreach my $secname (@{$sections->{$level}}) {
+			print "\t\t*(${section}..${secname}) ;\n";
+		}
+
+		print "\t}\n";
+	}
+
+	print "}\n";
+}
+
+generate_initcall_lds();
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index a352a5ad9ef7..1d5730176bed 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -43,6 +43,16 @@ info()
 	fi
 }
 
+# Generate a linker script to ensure correct ordering of initcalls.
+gen_initcalls()
+{
+	info GEN .tmp_initcalls.lds
+
+	${srctree}/scripts/generate_initcall_order.pl \
+		${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS} \
+		> .tmp_initcalls.lds
+}
+
 # If CONFIG_LTO_CLANG is selected, collect generated symbol versions into
 # .tmp_symversions.lds
 gen_symversions()
@@ -74,6 +84,9 @@ modpost_link()
 		--end-group"
 
 	if [ -n "${CONFIG_LTO_CLANG}" ]; then
+		gen_initcalls
+		lds="-T .tmp_initcalls.lds"
+
 		if [ -n "${CONFIG_MODVERSIONS}" ]; then
 			gen_symversions
 			lds="${lds} -T .tmp_symversions.lds"
@@ -285,6 +298,7 @@ cleanup()
 {
 	rm -f .btf.*
 	rm -f .tmp_System.map
+	rm -f .tmp_initcalls.lds
 	rm -f .tmp_symversions.lds
 	rm -f .tmp_vmlinux*
 	rm -f System.map
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 16/28] init: lto: fix PREL32 relocations
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (14 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 15/28] init: lto: ensure initcall ordering Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:41     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 17/28] PCI: Fix PREL32 relocations for LTO Sami Tolvanen
                     ` (16 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With LTO, the compiler can rename static functions to avoid global
naming collisions. As initcall functions are typically static,
renaming can break references to them in inline assembly. This
change adds a global stub with a stable name for each initcall to
fix the issue when PREL32 relocations are used.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 include/linux/init.h | 31 +++++++++++++++++++++++++++----
 1 file changed, 27 insertions(+), 4 deletions(-)

diff --git a/include/linux/init.h b/include/linux/init.h
index af638cd6dd52..cea63f7e7705 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -209,26 +209,49 @@ extern bool initcall_debug;
  */
 #define __initcall_section(__sec, __iid)			\
 	#__sec ".init.." #__iid
+
+/*
+ * With LTO, the compiler can rename static functions to avoid
+ * global naming collisions. We use a global stub function for
+ * initcalls to create a stable symbol name whose address can be
+ * taken in inline assembly when PREL32 relocations are used.
+ */
+#define __initcall_stub(fn, __iid, id)				\
+	__initcall_name(initstub, __iid, id)
+
+#define __define_initcall_stub(__stub, fn)			\
+	int __init __stub(void);				\
+	int __init __stub(void)					\
+	{ 							\
+		return fn();					\
+	}							\
+	__ADDRESSABLE(__stub)
 #else
 #define __initcall_section(__sec, __iid)			\
 	#__sec ".init"
+
+#define __initcall_stub(fn, __iid, id)	fn
+
+#define __define_initcall_stub(__stub, fn)			\
+	__ADDRESSABLE(fn)
 #endif
 
 #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
-#define ____define_initcall(fn, __name, __sec)			\
-	__ADDRESSABLE(fn)					\
+#define ____define_initcall(fn, __stub, __name, __sec)		\
+	__define_initcall_stub(__stub, fn)			\
 	asm(".section	\"" __sec "\", \"a\"		\n"	\
 	    __stringify(__name) ":			\n"	\
-	    ".long	" #fn " - .			\n"	\
+	    ".long	" __stringify(__stub) " - .	\n"	\
 	    ".previous					\n");
 #else
-#define ____define_initcall(fn, __name, __sec)			\
+#define ____define_initcall(fn, __unused, __name, __sec)	\
 	static initcall_t __name __used 			\
 		__attribute__((__section__(__sec))) = fn;
 #endif
 
 #define __unique_initcall(fn, id, __sec, __iid)			\
 	____define_initcall(fn,					\
+		__initcall_stub(fn, __iid, id),			\
 		__initcall_name(initcall, __iid, id),		\
 		__initcall_section(__sec, __iid))
 
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 17/28] PCI: Fix PREL32 relocations for LTO
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (15 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 16/28] init: lto: fix PREL32 relocations Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:42     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 18/28] modpost: lto: strip .lto from module names Sami Tolvanen
                     ` (15 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With Clang's Link Time Optimization (LTO), the compiler can rename
static functions to avoid global naming collisions. As PCI fixup
functions are typically static, renaming can break references
to them in inline assembly. This change adds a global stub to
DECLARE_PCI_FIXUP_SECTION to fix the issue when PREL32 relocations
are used.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
 include/linux/pci.h | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/include/linux/pci.h b/include/linux/pci.h
index 835530605c0d..4e64421981c7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1909,19 +1909,28 @@ enum pci_fixup_pass {
 };
 
 #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
-#define __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
-				    class_shift, hook)			\
-	__ADDRESSABLE(hook)						\
+#define ___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
+				    class_shift, hook, stub)		\
+	void stub(struct pci_dev *dev);					\
+	void stub(struct pci_dev *dev)					\
+	{ 								\
+		hook(dev); 						\
+	}								\
 	asm(".section "	#sec ", \"a\"				\n"	\
 	    ".balign	16					\n"	\
 	    ".short "	#vendor ", " #device "			\n"	\
 	    ".long "	#class ", " #class_shift "		\n"	\
-	    ".long "	#hook " - .				\n"	\
+	    ".long "	#stub " - .				\n"	\
 	    ".previous						\n");
+
+#define __DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
+				  class_shift, hook, stub)		\
+	___DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
+				  class_shift, hook, stub)
 #define DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
 				  class_shift, hook)			\
 	__DECLARE_PCI_FIXUP_SECTION(sec, name, vendor, device, class,	\
-				  class_shift, hook)
+				  class_shift, hook, __UNIQUE_ID(hook))
 #else
 /* Anonymous variables would be nice... */
 #define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class,	\
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 18/28] modpost: lto: strip .lto from module names
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (16 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 17/28] PCI: Fix PREL32 relocations for LTO Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:42     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 19/28] scripts/mod: disable LTO for empty.c Sami Tolvanen
                     ` (14 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With LTO, everything is compiled into LLVM bitcode, so we have to link
each module into native code before modpost. Kbuild uses the .lto.o
suffix for these files, which also ends up in module information. This
change strips the unnecessary .lto suffix from the module name.

Suggested-by: Bill Wendling <morbo@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 scripts/mod/modpost.c    | 16 +++++++---------
 scripts/mod/modpost.h    |  9 +++++++++
 scripts/mod/sumversion.c |  6 +++++-
 3 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 69341b36f271..5a329df55cc3 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -17,7 +17,6 @@
 #include <ctype.h>
 #include <string.h>
 #include <limits.h>
-#include <stdbool.h>
 #include <errno.h>
 #include "modpost.h"
 #include "../../include/linux/license.h"
@@ -80,14 +79,6 @@ modpost_log(enum loglevel loglevel, const char *fmt, ...)
 		exit(1);
 }
 
-static inline bool strends(const char *str, const char *postfix)
-{
-	if (strlen(str) < strlen(postfix))
-		return false;
-
-	return strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
-}
-
 void *do_nofail(void *ptr, const char *expr)
 {
 	if (!ptr)
@@ -1984,6 +1975,10 @@ static char *remove_dot(char *s)
 		size_t m = strspn(s + n + 1, "0123456789");
 		if (m && (s[n + m] == '.' || s[n + m] == 0))
 			s[n] = 0;
+
+		/* strip trailing .lto */
+		if (strends(s, ".lto"))
+			s[strlen(s) - 4] = '\0';
 	}
 	return s;
 }
@@ -2007,6 +2002,9 @@ static void read_symbols(const char *modname)
 		/* strip trailing .o */
 		tmp = NOFAIL(strdup(modname));
 		tmp[strlen(tmp) - 2] = '\0';
+		/* strip trailing .lto */
+		if (strends(tmp, ".lto"))
+			tmp[strlen(tmp) - 4] = '\0';
 		mod = new_module(tmp);
 		free(tmp);
 	}
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index 3aa052722233..fab30d201f9e 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -2,6 +2,7 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <stdarg.h>
+#include <stdbool.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/stat.h>
@@ -180,6 +181,14 @@ static inline unsigned int get_secindex(const struct elf_info *info,
 	return info->symtab_shndx_start[sym - info->symtab_start];
 }
 
+static inline bool strends(const char *str, const char *postfix)
+{
+	if (strlen(str) < strlen(postfix))
+		return false;
+
+	return strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
+}
+
 /* file2alias.c */
 extern unsigned int cross_build;
 void handle_moddevtable(struct module *mod, struct elf_info *info,
diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c
index d587f40f1117..760e6baa7eda 100644
--- a/scripts/mod/sumversion.c
+++ b/scripts/mod/sumversion.c
@@ -391,10 +391,14 @@ void get_src_version(const char *modname, char sum[], unsigned sumlen)
 	struct md4_ctx md;
 	char *fname;
 	char filelist[PATH_MAX + 1];
+	int postfix_len = 1;
+
+	if (strends(modname, ".lto.o"))
+		postfix_len = 5;
 
 	/* objects for a module are listed in the first line of *.mod file. */
 	snprintf(filelist, sizeof(filelist), "%.*smod",
-		 (int)strlen(modname) - 1, modname);
+		 (int)strlen(modname) - postfix_len, modname);
 
 	buf = read_text_file(filelist);
 
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 19/28] scripts/mod: disable LTO for empty.c
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (17 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 18/28] modpost: lto: strip .lto from module names Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:43     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 20/28] efi/libstub: disable LTO Sami Tolvanen
                     ` (13 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With CONFIG_LTO_CLANG, clang generates LLVM IR instead of ELF object
files. As empty.o is used for probing target properties, disable LTO
for it to produce an object file instead.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 scripts/mod/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/scripts/mod/Makefile b/scripts/mod/Makefile
index 78071681d924..c9e38ad937fd 100644
--- a/scripts/mod/Makefile
+++ b/scripts/mod/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 OBJECT_FILES_NON_STANDARD := y
+CFLAGS_REMOVE_empty.o += $(CC_FLAGS_LTO)
 
 hostprogs-always-y	+= modpost mk_elfconfig
 always-y		+= empty.o
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 20/28] efi/libstub: disable LTO
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (18 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 19/28] scripts/mod: disable LTO for empty.c Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:43     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 21/28] drivers/misc/lkdtm: disable LTO for rodata.o Sami Tolvanen
                     ` (12 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

With CONFIG_LTO_CLANG, we produce LLVM bitcode instead of ELF object
files. Since LTO is not really needed here and the Makefile assumes we
produce an object file, disable LTO for libstub.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 drivers/firmware/efi/libstub/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index 296b18fbd7a2..0ea5aa52c7fa 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -35,6 +35,8 @@ KBUILD_CFLAGS			:= $(cflags-y) -Os -DDISABLE_BRANCH_PROFILING \
 
 # remove SCS flags from all objects in this directory
 KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
+# disable LTO
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
 
 GCOV_PROFILE			:= n
 # Sanitizer runtimes are unavailable and cannot be linked here.
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 21/28] drivers/misc/lkdtm: disable LTO for rodata.o
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (19 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 20/28] efi/libstub: disable LTO Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 20:30   ` [PATCH v2 22/28] arm64: export CC_USING_PATCHABLE_FUNCTION_ENTRY Sami Tolvanen
                     ` (11 subsequent siblings)
  32 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

Disable LTO for rodata.o to allow objcopy to be used to
manipulate sections.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
---
 drivers/misc/lkdtm/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/misc/lkdtm/Makefile b/drivers/misc/lkdtm/Makefile
index c70b3822013f..dd4c936d4d73 100644
--- a/drivers/misc/lkdtm/Makefile
+++ b/drivers/misc/lkdtm/Makefile
@@ -13,6 +13,7 @@ lkdtm-$(CONFIG_LKDTM)		+= cfi.o
 
 KASAN_SANITIZE_stackleak.o	:= n
 KCOV_INSTRUMENT_rodata.o	:= n
+CFLAGS_REMOVE_rodata.o		+= $(CC_FLAGS_LTO)
 
 OBJCOPYFLAGS :=
 OBJCOPYFLAGS_rodata_objcopy.o	:= \
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 22/28] arm64: export CC_USING_PATCHABLE_FUNCTION_ENTRY
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (20 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 21/28] drivers/misc/lkdtm: disable LTO for rodata.o Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:44     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 23/28] arm64: vdso: disable LTO Sami Tolvanen
                     ` (10 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

Since arm64 does not use -pg in CC_FLAGS_FTRACE with
DYNAMIC_FTRACE_WITH_REGS, skip running recordmcount by
exporting CC_USING_PATCHABLE_FUNCTION_ENTRY.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/arm64/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 130569f90c54..eeaf3c2e0971 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -127,6 +127,7 @@ endif
 ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_REGS),y)
   KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
   CC_FLAGS_FTRACE := -fpatchable-function-entry=2
+  export CC_USING_PATCHABLE_FUNCTION_ENTRY := 1
 endif
 
 # Default value
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 23/28] arm64: vdso: disable LTO
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (21 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 22/28] arm64: export CC_USING_PATCHABLE_FUNCTION_ENTRY Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:45     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 24/28] KVM: arm64: disable LTO for the nVHE directory Sami Tolvanen
                     ` (9 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

Disable LTO for the vDSO by filtering out CC_FLAGS_LTO, as there's no
point in using link-time optimization for the small about of C code.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/arm64/kernel/vdso/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index 45d5cfe46429..aa47070a3ccf 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -30,8 +30,8 @@ ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv	\
 ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18
 ccflags-y += -DDISABLE_BRANCH_PROFILING
 
-CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) $(GCC_PLUGINS_CFLAGS)
-KBUILD_CFLAGS			+= $(DISABLE_LTO)
+CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) $(GCC_PLUGINS_CFLAGS) \
+				$(CC_FLAGS_LTO)
 KASAN_SANITIZE			:= n
 UBSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 24/28] KVM: arm64: disable LTO for the nVHE directory
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (22 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 23/28] arm64: vdso: disable LTO Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:45     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 25/28] arm64: allow LTO_CLANG and THINLTO to be selected Sami Tolvanen
                     ` (8 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

We use objcopy to manipulate ELF binaries for the nvhe code,
which fails with LTO as the compiler produces LLVM bitcode
instead. Disable LTO for this code to allow objcopy to be used.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/arm64/kvm/hyp/nvhe/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
index aef76487edc2..c903c8f31280 100644
--- a/arch/arm64/kvm/hyp/nvhe/Makefile
+++ b/arch/arm64/kvm/hyp/nvhe/Makefile
@@ -45,9 +45,9 @@ quiet_cmd_hypcopy = HYPCOPY $@
 		   --rename-section=.text=.hyp.text			\
 		   $< $@
 
-# Remove ftrace and Shadow Call Stack CFLAGS.
+# Remove ftrace, LTO, and Shadow Call Stack CFLAGS.
 # This is equivalent to the 'notrace' and '__noscs' annotations.
-KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_FTRACE) $(CC_FLAGS_LTO) $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
 
 # KVM nVHE code is run at a different exception code with a different map, so
 # compiler instrumentation that inserts callbacks or checks into the code may
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 25/28] arm64: allow LTO_CLANG and THINLTO to be selected
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (23 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 24/28] KVM: arm64: disable LTO for the nVHE directory Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:45     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 26/28] x86, vdso: disable LTO only for vDSO Sami Tolvanen
                     ` (7 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

Allow CONFIG_LTO_CLANG and CONFIG_THINLTO to be enabled.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/arm64/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 6d232837cbee..2699fc5d332e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -72,6 +72,8 @@ config ARM64
 	select ARCH_USE_SYM_ANNOTATIONS
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 	select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
+	select ARCH_SUPPORTS_LTO_CLANG
+	select ARCH_SUPPORTS_THINLTO
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG)
 	select ARCH_SUPPORTS_NUMA_BALANCING
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 26/28] x86, vdso: disable LTO only for vDSO
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (24 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 25/28] arm64: allow LTO_CLANG and THINLTO to be selected Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:46     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 27/28] x86, relocs: Ignore L4_PAGE_OFFSET relocations Sami Tolvanen
                     ` (6 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

Remove the undefined DISABLE_LTO flag from the vDSO, and filter out
CC_FLAGS_LTO flags instead where needed. Note that while we could use
Clang's LTO for the 64-bit vDSO, it won't add noticeable benefit for
the small amount of C code.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/x86/entry/vdso/Makefile | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 215376d975a2..9b742f21d2db 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -9,8 +9,6 @@ ARCH_REL_TYPE_ABS := R_X86_64_JUMP_SLOT|R_X86_64_GLOB_DAT|R_X86_64_RELATIVE|
 ARCH_REL_TYPE_ABS += R_386_GLOB_DAT|R_386_JMP_SLOT|R_386_RELATIVE
 include $(srctree)/lib/vdso/Makefile
 
-KBUILD_CFLAGS += $(DISABLE_LTO)
-
 # Sanitizer runtimes are unavailable and cannot be linked here.
 KASAN_SANITIZE			:= n
 UBSAN_SANITIZE			:= n
@@ -92,7 +90,7 @@ ifneq ($(RETPOLINE_VDSO_CFLAGS),)
 endif
 endif
 
-$(vobjs): KBUILD_CFLAGS := $(filter-out $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS)) $(CFL)
+$(vobjs): KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO) $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS)) $(CFL)
 
 #
 # vDSO code runs in userspace and -pg doesn't help with profiling anyway.
@@ -150,6 +148,7 @@ KBUILD_CFLAGS_32 := $(filter-out -fno-pic,$(KBUILD_CFLAGS_32))
 KBUILD_CFLAGS_32 := $(filter-out -mfentry,$(KBUILD_CFLAGS_32))
 KBUILD_CFLAGS_32 := $(filter-out $(GCC_PLUGINS_CFLAGS),$(KBUILD_CFLAGS_32))
 KBUILD_CFLAGS_32 := $(filter-out $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS_32))
+KBUILD_CFLAGS_32 := $(filter-out $(CC_FLAGS_LTO),$(KBUILD_CFLAGS_32))
 KBUILD_CFLAGS_32 += -m32 -msoft-float -mregparm=0 -fpic
 KBUILD_CFLAGS_32 += -fno-stack-protector
 KBUILD_CFLAGS_32 += $(call cc-option, -foptimize-sibling-calls)
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 27/28] x86, relocs: Ignore L4_PAGE_OFFSET relocations
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (25 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 26/28] x86, vdso: disable LTO only for vDSO Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:47     ` Kees Cook
  2020-09-03 20:30   ` [PATCH v2 28/28] x86, build: allow LTO_CLANG and THINLTO to be selected Sami Tolvanen
                     ` (5 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

L4_PAGE_OFFSET is a constant value, so don't warn about absolute
relocations.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/x86/tools/relocs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index ce7188cbdae5..8f3bf34840ce 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -47,6 +47,7 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = {
 	[S_ABS] =
 	"^(xen_irq_disable_direct_reloc$|"
 	"xen_save_fl_direct_reloc$|"
+	"L4_PAGE_OFFSET|"
 	"VDSO|"
 	"__crc_)",
 
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* [PATCH v2 28/28] x86, build: allow LTO_CLANG and THINLTO to be selected
  2020-09-03 20:30 ` [PATCH v2 00/28] Add " Sami Tolvanen
                     ` (26 preceding siblings ...)
  2020-09-03 20:30   ` [PATCH v2 27/28] x86, relocs: Ignore L4_PAGE_OFFSET relocations Sami Tolvanen
@ 2020-09-03 20:30   ` Sami Tolvanen
  2020-09-03 22:48     ` Kees Cook
  2020-09-03 23:34   ` [PATCH v2 00/28] Add support for Clang LTO Kees Cook
                     ` (4 subsequent siblings)
  32 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 20:30 UTC (permalink / raw)
  To: Masahiro Yamada, Will Deacon
  Cc: Peter Zijlstra, Steven Rostedt, Greg Kroah-Hartman,
	Paul E. McKenney, Kees Cook, Nick Desaulniers, clang-built-linux,
	kernel-hardening, linux-arch, linux-arm-kernel, linux-kbuild,
	linux-kernel, linux-pci, x86, Sami Tolvanen

Allow CONFIG_LTO_CLANG and CONFIG_THINLTO to be enabled.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
---
 arch/x86/Kconfig  | 2 ++
 arch/x86/Makefile | 5 +++++
 2 files changed, 7 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6de2e5c0bdba..0a49008c2363 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -92,6 +92,8 @@ config X86
 	select ARCH_SUPPORTS_ACPI
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_NUMA_BALANCING	if X86_64
+	select ARCH_SUPPORTS_LTO_CLANG		if X86_64
+	select ARCH_SUPPORTS_THINLTO		if X86_64
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 4346ffb2e39f..49e3b8674eb5 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -173,6 +173,11 @@ ifeq ($(ACCUMULATE_OUTGOING_ARGS), 1)
 	KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args,)
 endif
 
+ifdef CONFIG_LTO_CLANG
+KBUILD_LDFLAGS	+= -plugin-opt=-code-model=kernel \
+		   -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
+endif
+
 # Workaround for a gcc prelease that unfortunately was shipped in a suse release
 KBUILD_CFLAGS += -Wno-sign-compare
 #
-- 
2.28.0.402.g5ffc5be6b7-goog


^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 01/28] x86/boot/compressed: Disable relocation relaxation
  2020-09-03 20:30   ` [PATCH v2 01/28] x86/boot/compressed: Disable relocation relaxation Sami Tolvanen
@ 2020-09-03 21:44     ` Kees Cook
  2020-09-03 23:42       ` Arvind Sankar
  0 siblings, 1 reply; 213+ messages in thread
From: Kees Cook @ 2020-09-03 21:44 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86,
	Arvind Sankar

On Thu, Sep 03, 2020 at 01:30:26PM -0700, Sami Tolvanen wrote:
> From: Arvind Sankar <nivedita@alum.mit.edu>
> 
> The x86-64 psABI [0] specifies special relocation types
> (R_X86_64_[REX_]GOTPCRELX) for indirection through the Global Offset
> Table, semantically equivalent to R_X86_64_GOTPCREL, which the linker
> can take advantage of for optimization (relaxation) at link time. This
> is supported by LLD and binutils versions 2.26 onwards.
> 
> The compressed kernel is position-independent code, however, when using
> LLD or binutils versions before 2.27, it must be linked without the -pie
> option. In this case, the linker may optimize certain instructions into
> a non-position-independent form, by converting foo@GOTPCREL(%rip) to $foo.
> 
> This potential issue has been present with LLD and binutils-2.26 for a
> long time, but it has never manifested itself before now:
> - LLD and binutils-2.26 only relax
> 	movq	foo@GOTPCREL(%rip), %reg
>   to
> 	leaq	foo(%rip), %reg
>   which is still position-independent, rather than
> 	mov	$foo, %reg
>   which is permitted by the psABI when -pie is not enabled.
> - gcc happens to only generate GOTPCREL relocations on mov instructions.
> - clang does generate GOTPCREL relocations on non-mov instructions, but
>   when building the compressed kernel, it uses its integrated assembler
>   (due to the redefinition of KBUILD_CFLAGS dropping -no-integrated-as),
>   which has so far defaulted to not generating the GOTPCRELX
>   relocations.
> 
> Nick Desaulniers reports [1,2]:
>   A recent change [3] to a default value of configuration variable
>   (ENABLE_X86_RELAX_RELOCATIONS OFF -> ON) in LLVM now causes Clang's
>   integrated assembler to emit R_X86_64_GOTPCRELX/R_X86_64_REX_GOTPCRELX
>   relocations. LLD will relax instructions with these relocations based
>   on whether the image is being linked as position independent or not.
>   When not, then LLD will relax these instructions to use absolute
>   addressing mode (R_RELAX_GOT_PC_NOPIC). This causes kernels built with
>   Clang and linked with LLD to fail to boot.
> 
> Patch series [4] is a solution to allow the compressed kernel to be
> linked with -pie unconditionally, but even if merged is unlikely to be
> backported. As a simple solution that can be applied to stable as well,
> prevent the assembler from generating the relaxed relocation types using
> the -mrelax-relocations=no option. For ease of backporting, do this
> unconditionally.
> 
> [0] https://gitlab.com/x86-psABIs/x86-64-ABI/-/blob/master/x86-64-ABI/linker-optimization.tex#L65
> [1] https://lore.kernel.org/lkml/20200807194100.3570838-1-ndesaulniers@google.com/
> [2] https://github.com/ClangBuiltLinux/linux/issues/1121
> [3] https://reviews.llvm.org/rGc41a18cf61790fc898dcda1055c3efbf442c14c0
> [4] https://lore.kernel.org/lkml/20200731202738.2577854-1-nivedita@alum.mit.edu/
> 
> Reported-by: Nick Desaulniers <ndesaulniers@google.com>
> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 02/28] x86/asm: Replace __force_order with memory clobber
  2020-09-03 20:30   ` [PATCH v2 02/28] x86/asm: Replace __force_order with memory clobber Sami Tolvanen
@ 2020-09-03 21:45     ` Kees Cook
  0 siblings, 0 replies; 213+ messages in thread
From: Kees Cook @ 2020-09-03 21:45 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86,
	Arvind Sankar

On Thu, Sep 03, 2020 at 01:30:27PM -0700, Sami Tolvanen wrote:
> From: Arvind Sankar <nivedita@alum.mit.edu>
> 
> The CRn accessor functions use __force_order as a dummy operand to
> prevent the compiler from reordering CRn reads/writes with respect to
> each other.
> 
> The fact that the asm is volatile should be enough to prevent this:
> volatile asm statements should be executed in program order. However GCC
> 4.9.x and 5.x have a bug that might result in reordering. This was fixed
> in 8.1, 7.3 and 6.5. Versions prior to these, including 5.x and 4.9.x,
> may reorder volatile asm statements with respect to each other.
> 
> There are some issues with __force_order as implemented:
> - It is used only as an input operand for the write functions, and hence
>   doesn't do anything additional to prevent reordering writes.
> - It allows memory accesses to be cached/reordered across write
>   functions, but CRn writes affect the semantics of memory accesses, so
>   this could be dangerous.
> - __force_order is not actually defined in the kernel proper, but the
>   LLVM toolchain can in some cases require a definition: LLVM (as well
>   as GCC 4.9) requires it for PIE code, which is why the compressed
>   kernel has a definition, but also the clang integrated assembler may
>   consider the address of __force_order to be significant, resulting in
>   a reference that requires a definition.
> 
> Fix this by:
> - Using a memory clobber for the write functions to additionally prevent
>   caching/reordering memory accesses across CRn writes.
> - Using a dummy input operand with an arbitrary constant address for the
>   read functions, instead of a global variable. This will prevent reads
>   from being reordered across writes, while allowing memory loads to be
>   cached/reordered across CRn reads, which should be safe.
> 
> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>

In the primary thread for this patch I sent a Reviewed tag, but for good
measure, here it is again:

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 03/28] lib/string.c: implement stpcpy
  2020-09-03 20:30   ` [PATCH v2 03/28] lib/string.c: implement stpcpy Sami Tolvanen
@ 2020-09-03 21:47     ` Kees Cook
  0 siblings, 0 replies; 213+ messages in thread
From: Kees Cook @ 2020-09-03 21:47 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86

On Thu, Sep 03, 2020 at 01:30:28PM -0700, Sami Tolvanen wrote:
> From: Nick Desaulniers <ndesaulniers@google.com>
> 
> LLVM implemented a recent "libcall optimization" that lowers calls to
> `sprintf(dest, "%s", str)` where the return value is used to
> `stpcpy(dest, str) - dest`. This generally avoids the machinery involved
> in parsing format strings.  `stpcpy` is just like `strcpy` except it
> returns the pointer to the new tail of `dest`.  This optimization was
> introduced into clang-12.
> 
> Implement this so that we don't observe linkage failures due to missing
> symbol definitions for `stpcpy`.
> 
> Similar to last year's fire drill with:
> commit 5f074f3e192f ("lib/string.c: implement a basic bcmp")
> 
> The kernel is somewhere between a "freestanding" environment (no full libc)
> and "hosted" environment (many symbols from libc exist with the same
> type, function signature, and semantics).
> 
> As H. Peter Anvin notes, there's not really a great way to inform the
> compiler that you're targeting a freestanding environment but would like
> to opt-in to some libcall optimizations (see pr/47280 below), rather than
> opt-out.
> 
> Arvind notes, -fno-builtin-* behaves slightly differently between GCC
> and Clang, and Clang is missing many __builtin_* definitions, which I
> consider a bug in Clang and am working on fixing.
> 
> Masahiro summarizes the subtle distinction between compilers justly:
>   To prevent transformation from foo() into bar(), there are two ways in
>   Clang to do that; -fno-builtin-foo, and -fno-builtin-bar.  There is
>   only one in GCC; -fno-buitin-foo.
> 
> (Any difference in that behavior in Clang is likely a bug from a missing
> __builtin_* definition.)
> 
> Masahiro also notes:
>   We want to disable optimization from foo() to bar(),
>   but we may still benefit from the optimization from
>   foo() into something else. If GCC implements the same transform, we
>   would run into a problem because it is not -fno-builtin-bar, but
>   -fno-builtin-foo that disables that optimization.
> 
>   In this regard, -fno-builtin-foo would be more future-proof than
>   -fno-built-bar, but -fno-builtin-foo is still potentially overkill. We
>   may want to prevent calls from foo() being optimized into calls to
>   bar(), but we still may want other optimization on calls to foo().
> 
> It seems that compilers today don't quite provide the fine grain control
> over which libcall optimizations pseudo-freestanding environments would
> prefer.
> 
> Finally, Kees notes that this interface is unsafe, so we should not
> encourage its use.  As such, I've removed the declaration from any
> header, but it still needs to be exported to avoid linkage errors in
> modules.
> 
> Reported-by: Sami Tolvanen <samitolvanen@google.com>
> Suggested-by: Andy Lavr <andy.lavr@gmail.com>
> Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
> Suggested-by: Joe Perches <joe@perches.com>
> Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
> Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>

As you mentioned, this is in -next already (via -mm). I think I sent a
tag for this before, but maybe akpm missed it, so for good measure:

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 04/28] RAS/CEC: Fix cec_init() prototype
  2020-09-03 20:30   ` [PATCH v2 04/28] RAS/CEC: Fix cec_init() prototype Sami Tolvanen
@ 2020-09-03 21:50     ` Kees Cook
  0 siblings, 0 replies; 213+ messages in thread
From: Kees Cook @ 2020-09-03 21:50 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86,
	Luca Stefani

On Thu, Sep 03, 2020 at 01:30:29PM -0700, Sami Tolvanen wrote:
> From: Luca Stefani <luca.stefani.ge1@gmail.com>
> 
> late_initcall() expects a function that returns an integer. Update the
> function signature to match.
> 
>  [ bp: Massage commit message into proper sentences. ]
> 
> Fixes: 9554bfe403nd ("x86/mce: Convert the CEC to use the MCE notifier")
> Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>

I don't see this in -next yet (next-20200903), but given Boris's SoB, I
suspect it just hasn't snuck it's way there from -tip. Regardless:

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 05/28] objtool: Add a pass for generating __mcount_loc
  2020-09-03 20:30   ` [PATCH v2 05/28] objtool: Add a pass for generating __mcount_loc Sami Tolvanen
@ 2020-09-03 21:51     ` Kees Cook
  2020-09-03 22:03       ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Kees Cook @ 2020-09-03 21:51 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86

On Thu, Sep 03, 2020 at 01:30:30PM -0700, Sami Tolvanen wrote:
> From: Peter Zijlstra <peterz@infradead.org>
> 
> Add the --mcount option for generating __mcount_loc sections
> needed for dynamic ftrace. Using this pass requires the kernel to
> be compiled with -mfentry and CC_USING_NOP_MCOUNT to be defined
> in Makefile.
> 
> Link: https://lore.kernel.org/lkml/20200625200235.GQ4781@hirez.programming.kicks-ass.net/
> Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Hmm, I'm not sure why this hasn't gotten picked up yet. Is this expected
to go through -tip or something else?

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 06/28] objtool: Don't autodetect vmlinux.o
  2020-09-03 20:30   ` [PATCH v2 06/28] objtool: Don't autodetect vmlinux.o Sami Tolvanen
@ 2020-09-03 21:52     ` Kees Cook
  0 siblings, 0 replies; 213+ messages in thread
From: Kees Cook @ 2020-09-03 21:52 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86

On Thu, Sep 03, 2020 at 01:30:31PM -0700, Sami Tolvanen wrote:
> With LTO, we run objtool on vmlinux.o, but don't want noinstr
> validation. This change requires --vmlinux to be passed to objtool
> explicitly.
> 
> Suggested-by: Peter Zijlstra <peterz@infradead.org>
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

Looks right to me.

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 07/28] kbuild: add support for objtool mcount
  2020-09-03 20:30   ` [PATCH v2 07/28] kbuild: add support for objtool mcount Sami Tolvanen
@ 2020-09-03 21:56     ` Kees Cook
  0 siblings, 0 replies; 213+ messages in thread
From: Kees Cook @ 2020-09-03 21:56 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86

On Thu, Sep 03, 2020 at 01:30:32PM -0700, 'Sami Tolvanen' via Clang Built Linux wrote:
> This change adds build support for using objtool to generate
> __mcount_loc sections.
> 
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

Looks right to me. (There is probably an argument to be made to do all
of the tooling detection in the Kconfig, but that's a larger issues and
orthogonal to this fix, IMO.)

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 08/28] x86, build: use objtool mcount
  2020-09-03 20:30   ` [PATCH v2 08/28] x86, build: use " Sami Tolvanen
@ 2020-09-03 21:58     ` Kees Cook
  2020-09-03 22:11       ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Kees Cook @ 2020-09-03 21:58 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86

On Thu, Sep 03, 2020 at 01:30:33PM -0700, Sami Tolvanen wrote:
> Select HAVE_OBJTOOL_MCOUNT if STACK_VALIDATION is selected to use
> objtool to generate __mcount_loc sections for dynamic ftrace with
> Clang and gcc <5.
> 
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

Am I right to understand that this fixes mcount for Clang generally
(i.e. it's not _strictly_ related to LTO, though LTO depends on this
change)? And does this mean mcount was working for gcc < 5?

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 05/28] objtool: Add a pass for generating __mcount_loc
  2020-09-03 21:51     ` Kees Cook
@ 2020-09-03 22:03       ` Sami Tolvanen
  2020-09-04  9:31         ` peterz
  0 siblings, 1 reply; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 22:03 UTC (permalink / raw)
  To: Kees Cook
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, Kernel Hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, LKML, linux-pci, X86 ML

On Thu, Sep 3, 2020 at 2:51 PM Kees Cook <keescook@chromium.org> wrote:
>
> On Thu, Sep 03, 2020 at 01:30:30PM -0700, Sami Tolvanen wrote:
> > From: Peter Zijlstra <peterz@infradead.org>
> >
> > Add the --mcount option for generating __mcount_loc sections
> > needed for dynamic ftrace. Using this pass requires the kernel to
> > be compiled with -mfentry and CC_USING_NOP_MCOUNT to be defined
> > in Makefile.
> >
> > Link: https://lore.kernel.org/lkml/20200625200235.GQ4781@hirez.programming.kicks-ass.net/
> > Signed-off-by: Peter Zijlstra <peterz@infradead.org>
>
> Hmm, I'm not sure why this hasn't gotten picked up yet. Is this expected
> to go through -tip or something else?

Note that I picked up this patch from Peter's original email, to which
I included a link in the commit message, but it wasn't officially
submitted as a patch. However, the previous discussion seems to have
died, so I included the patch in this series, as it cleanly solves the
problem of whitelisting non-call references to __fentry__. I was
hoping for Peter and Steven to comment on how they prefer to proceed
here.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 09/28] kbuild: add support for Clang LTO
  2020-09-03 20:30   ` [PATCH v2 09/28] kbuild: add support for Clang LTO Sami Tolvanen
@ 2020-09-03 22:08     ` Kees Cook
  2020-09-08 17:02       ` Sami Tolvanen
  2020-09-05 19:36     ` Masahiro Yamada
                       ` (2 subsequent siblings)
  3 siblings, 1 reply; 213+ messages in thread
From: Kees Cook @ 2020-09-03 22:08 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86

On Thu, Sep 03, 2020 at 01:30:34PM -0700, Sami Tolvanen wrote:
> This change adds build system support for Clang's Link Time
> Optimization (LTO). With -flto, instead of ELF object files, Clang
> produces LLVM bitcode, which is compiled into native code at link
> time, allowing the final binary to be optimized globally. For more
> details, see:
> 
>   https://llvm.org/docs/LinkTimeOptimization.html
> 
> The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
> which defaults to LTO being disabled. To use LTO, the architecture
> must select ARCH_SUPPORTS_LTO_CLANG and support:
> 
>   - compiling with Clang,
>   - compiling inline assembly with Clang's integrated assembler,
>   - and linking with LLD.
> 
> While using full LTO results in the best runtime performance, the
> compilation is not scalable in time or memory. CONFIG_THINLTO
> enables ThinLTO, which allows parallel optimization and faster
> incremental builds. ThinLTO is used by default if the architecture
> also selects ARCH_SUPPORTS_THINLTO:
> 
>   https://clang.llvm.org/docs/ThinLTO.html
> 
> To enable LTO, LLVM tools must be used to handle bitcode files. The
> easiest way is to pass the LLVM=1 option to make:
> 
>   $ make LLVM=1 defconfig
>   $ scripts/config -e LTO_CLANG
>   $ make LLVM=1
> 
> Alternatively, at least the following LLVM tools must be used:
> 
>   CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm
> 
> To prepare for LTO support with other compilers, common parts are
> gated behind the CONFIG_LTO option, and LTO can be disabled for
> specific files by filtering out CC_FLAGS_LTO.
> 
> Note that support for DYNAMIC_FTRACE and MODVERSIONS are added in
> follow-up patches.
> 
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

I remain crazy excited about being able to use this in upstream. :)

The only suggestion I have here, if it might help with clarity, would be
to remove DISABLE_LTO globally as a separate patch, since it's entirely
unused in the kernel right now. This series removes it as it goes, which
I think is fine, but it might cause some reviewers to ponder "what's
this DISABLE_LTO thing? Don't we need that?" without realizing currently
unused in the kernel.

I'm glad to see the general CONFIG_LTO, as I think it should be easy for
GCC LTO support to get added when someone steps up to do it. The bulk of
the changed needed to support GCC LTO are part of this series already,
since the build problems involving non-ELF .o files and init ordering
are shared by Clang and GCC AFAICT.

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 10/28] kbuild: lto: fix module versioning
  2020-09-03 20:30   ` [PATCH v2 10/28] kbuild: lto: fix module versioning Sami Tolvanen
@ 2020-09-03 22:11     ` Kees Cook
  2020-09-08 18:23       ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Kees Cook @ 2020-09-03 22:11 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86

On Thu, Sep 03, 2020 at 01:30:35PM -0700, Sami Tolvanen wrote:
> With CONFIG_MODVERSIONS, version information is linked into each
> compilation unit that exports symbols. With LTO, we cannot use this
> method as all C code is compiled into LLVM bitcode instead. This
> change collects symbol versions into .symversions files and merges
> them in link-vmlinux.sh where they are all linked into vmlinux.o at
> the same time.
> 
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

The only thought I have here is I wonder if this change could be made
universally instead of gating on LTO? (i.e. is it noticeably slower to
do it this way under non-LTO?)

Reviewed-by: Kees Cook <keescook@chromium.org>

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 08/28] x86, build: use objtool mcount
  2020-09-03 21:58     ` Kees Cook
@ 2020-09-03 22:11       ` Sami Tolvanen
  0 siblings, 0 replies; 213+ messages in thread
From: Sami Tolvanen @ 2020-09-03 22:11 UTC (permalink / raw)
  To: Kees Cook
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, Kernel Hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, LKML, linux-pci, X86 ML

On Thu, Sep 3, 2020 at 2:58 PM Kees Cook <keescook@chromium.org> wrote:
>
> On Thu, Sep 03, 2020 at 01:30:33PM -0700, Sami Tolvanen wrote:
> > Select HAVE_OBJTOOL_MCOUNT if STACK_VALIDATION is selected to use
> > objtool to generate __mcount_loc sections for dynamic ftrace with
> > Clang and gcc <5.
> >
> > Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
>
> Am I right to understand that this fixes mcount for Clang generally
> (i.e. it's not _strictly_ related to LTO, though LTO depends on this
> change)?

No, this works fine with Clang when LTO is disabled, because
recordmcount ignores files named "ftrace.o". However, with LTO, we
process vmlinux.o instead, so we need a different method of ignoring
__fentry__ relocations that are not calls.

In v1, I used a function attribute to whitelist functions that refer
to __fentry__, but as Peter pointed out back then, objtool already
knows where the call sites are, so using it to generate __mcount_loc
is cleaner.

> And does this mean mcount was working for gcc < 5?

Yes. I should have been clearer in the commit message. The reason I
mentioned gcc <5 is that later gcc versions support -mrecord-mcount,
which means they don't need an external tool for generating
__mcount_loc anymore.

Sami

^ permalink raw reply	[flat|nested] 213+ messages in thread

* Re: [PATCH v2 11/28] kbuild: lto: postpone objtool
  2020-09-03 20:30   ` [PATCH v2 11/28] kbuild: lto: postpone objtool Sami Tolvanen
@ 2020-09-03 22:19     ` Kees Cook
  2020-09-08 20:56       ` Sami Tolvanen
  0 siblings, 1 reply; 213+ messages in thread
From: Kees Cook @ 2020-09-03 22:19 UTC (permalink / raw)
  To: Sami Tolvanen
  Cc: Masahiro Yamada, Will Deacon, Peter Zijlstra, Steven Rostedt,
	Greg Kroah-Hartman, Paul E. McKenney, Nick Desaulniers,
	clang-built-linux, kernel-hardening, linux-arch,
	linux-arm-kernel, linux-kbuild, linux-kernel, linux-pci, x86

On Thu, Sep 03, 2020 at 01:30:36PM -0700, Sami Tolvanen wrote:
> With LTO, LLVM bitcode won't be compiled into native code until
> modpost_link, or modfinal for modules. This change postpones calls
> to objtool until after these steps.
> 
> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

For a "fail fast" style of building, it makes sense to have objtool run
as early as possible, so it makes sense to keep the current behavior in
non-LTO mode. I do wonder, though, if there is a real benefit to having
"fail fast" case. I imagine a lot of automated builds are using
--keep-going with make, and actually waiting until the end to do the
validation means more code will get build-tested before objtool rejects
the results. *shrug*

> ---
>  arch/Kconfig              |  2 +-
>  scripts/Makefile.build    |  2 ++
>  scripts/Makefile.modfinal | 24 ++++++++++++++++++++++--
>  scripts/link-vmlinux.sh   | 23 ++++++++++++++++++++++-
>  4 files changed, 47 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/Kconfig b/arch/Kconfig
> index 71392e4a8900..7a418907e686 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -599,7 +599,7 @@ config LTO_CLANG
>  	depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
>  	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
>  	depends on ARCH_SUPPORTS_LTO_CLANG
> -	depends on !FTRACE_MCOUNT_RECORD
> +	depends on HAVE_OBJTOOL_MCOUNT || !(X86_64 && DYNAMIC_FTRACE)
>  	depends on !KASAN
>  	depends on !GCOV_KERNEL
>  	select LTO
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index c348e6d6b436..b8f1f0d65a73 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -218,6 +218,7 @@ cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)),
>  endif # USE_RECORDMCOUNT
>  
>  ifdef CONFIG_STACK_VALIDATION
> +ifndef CONFIG_LTO_CLANG
>  ifneq ($(SKIP_STACK_VALIDATION),1)
>  
>  __objtool_obj := $(objtree)/tools/objtool/objtool
> @@ -253,6 +254,7 @@ objtool_obj = $(if $(patsubst y%,, \
>  	$(__objtool_obj))
>  
>  endif # SKIP_STACK_VALIDATION
> +endif # CONFIG_LTO_CLANG
>  endif # CONFIG_STACK_VALIDATION
>  
>  # Rebuild all objects when objtool changes, or is enabled/disabled.
> diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> index 1005b147abd0..909bd509edb4 100644
> --- a/scripts/Makefile.modfinal
> +++ b/scripts/Makefile.modfinal
> @@ -34,10 +34,30 @@ ifdef CONFIG_LTO_CLANG
>  # With CONFIG_LTO_CLANG, reuse the object file we compiled for modpost to
>  # avoid a second slow LTO link
>  prelink-ext := .lto
> -endif
> +
> +# ELF processing was skipped earlier because we didn't have native code,
> +# so let's now process the prelinked binary before we link the module.
> +
> +ifdef CONFIG_STACK_VALIDATION
> +ifneq ($(SKIP_STACK_VALIDATION),1)
> +cmd_ld_ko_o +=								\
> +	$(objtree)/tools/objtool/objtool				\
> +		$(if $(CONFIG_UNWINDER_ORC),orc generate,check)		\
> +		--module						\
> +		$(if $(CONFIG_FRAME_POINTER),,--no-fp)			\
> +		$(if $(CONFIG_GCOV_KERNEL),--no-unreachable,)		\
> +		$(if $(CONFIG_RETPOLINE),--retpoline,)			\
> +		$(if $(CONFIG_X86_SMAP),--uaccess,)			\
> +		$(if $(USE_OBJTOOL_MCOUNT),--mcount,)			\
> +		$(@:.ko=$(prelink-ext).o);
> +
> +endif # SKIP_STACK_VALIDATION
> +endif # CONFIG_STACK_VALIDATION

I wonder if objtool_args could be reus