Hi Jason, Apologies for the delay in testing. I'm seeing this problem when I try to boot on a t4240rdb: random: get_random_u64 called from .start_kernel+0x734/0x964 with crng_init=0 [8/973] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xa9210e89c, max_idle_ns: 440795203878 ns clocksource: timebase mult[15d17460] shift[24] registered Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) e6500 family performance monitor hardware support registered rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... Processor 2 is stuck. Processor 3 is stuck. Processor 4 is stuck. Processor 5 is stuck. Processor 6 is stuck. Processor 7 is stuck. Processor 8 is stuck. Processor 9 is stuck. Processor 10 is stuck. Processor 11 is stuck. Processor 12 is stuck. Processor 13 is stuck. Processor 14 is stuck. ... Processor 22 is stuck. Processor 23 is stuck. smp: Brought up 1 node, 2 CPUs Using standard scheduler topology devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 8192 (order: 7, 524288 bytes, linear) NET: Registered protocol family 16 audit: initializing netlink subsys (disabled) audit: type=2000 audit(108.032:1): state=initialized audit_enabled=0 res=1 Machine: fsl,T4240RDB SoC family: QorIQ T4240 SoC ID: svr:0x82480020, Revision: 2.0 ... boot continues ... If I boot with nokaslr, all the CPUs come up with no issue. This is on top of powerpc/merge at 8299da600ad05b8aa0f15ec0f5f03bd40e37d6f0. If you'd like me to test any debug patches I can do that. I've attached my .config. Regards, Daniel