From mboxrd@z Thu Jan 1 00:00:00 1970 From: Julia Lawall Date: Mon, 22 Jun 2020 19:37:49 +0000 Subject: [PATCH] trivial: fix kerneldoc comments Message-Id: <1592854669-20606-1-git-send-email-Julia.Lawall@inria.fr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: trivial@kernel.org Cc: kernel-janitors@vger.kernel.org, corbet@lwn.net, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Fix the parameter names in the comment to correspond to those in the function header. Drop comments about return values when there is no return value. Signed-off-by: Julia Lawall --- arch/arm/mach-omap2/omap-secure.c | 2 +- arch/arm/mach-prima2/rtciobrg.c | 2 +- arch/mips/cavium-octeon/executive/cvmx-spi.c | 4 +--- arch/mips/kvm/tlb.c | 2 +- arch/parisc/kernel/drivers.c | 2 +- arch/powerpc/kernel/eeh_pe.c | 4 ++-- arch/powerpc/kernel/uprobes.c | 2 +- crypto/asymmetric_keys/verify_pefile.c | 2 +- drivers/ata/libata-transport.c | 4 ++-- drivers/base/power/wakeup.c | 2 +- drivers/bus/fsl-mc/mc-io.c | 2 +- drivers/crypto/bcm/spu.c | 4 ++-- drivers/crypto/qat/qat_common/adf_dev_mgr.c | 2 +- drivers/gpu/drm/omapdrm/omap_gem.c | 2 +- drivers/gpu/drm/radeon/r100.c | 2 +- drivers/gpu/drm/radeon/radeon_kms.c | 1 - drivers/hid/hid-core.c | 4 ++-- drivers/iio/dummy/iio_simple_dummy_buffer.c | 2 +- drivers/infiniband/core/roce_gid_mgmt.c | 2 +- drivers/infiniband/hw/i40iw/i40iw_hmc.c | 4 ++-- drivers/infiniband/hw/qib/qib_driver.c | 2 +- drivers/infiniband/hw/qib/qib_iba7220.c | 2 +- drivers/infiniband/sw/rdmavt/srq.c | 2 +- drivers/leds/trigger/ledtrig-cpu.c | 2 +- drivers/mfd/atmel-smc.c | 6 +++--- drivers/misc/enclosure.c | 4 ++-- drivers/net/bonding/bond_3ad.c | 2 +- drivers/net/bonding/bond_main.c | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 ++-- drivers/net/ethernet/freescale/dpaa2/dpni.c | 4 ++-- drivers/net/ethernet/freescale/fman/fman.c | 4 ++-- drivers/net/net_failover.c | 2 +- drivers/net/wireless/marvell/libertas/firmware.c | 4 ++-- drivers/net/wireless/mediatek/mt7601u/phy.c | 2 +- drivers/net/wireless/ti/wlcore/cmd.c | 2 +- drivers/of/address.c | 2 +- drivers/pci/hotplug/pci_hotplug_core.c | 2 +- drivers/pinctrl/core.c | 6 +++--- drivers/power/supply/power_supply_core.c | 2 +- drivers/scsi/bnx2i/bnx2i_hwi.c | 16 ++++++++-------- drivers/scsi/isci/port.c | 16 ++++++++-------- drivers/scsi/libfc/fc_fcp.c | 2 +- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- drivers/soc/mediatek/mtk-infracfg.c | 4 ++-- drivers/soundwire/stream.c | 2 +- drivers/thunderbolt/ctl.c | 2 ++ drivers/tty/tty_buffer.c | 4 ++-- drivers/tty/tty_ldisc.c | 2 +- drivers/usb/cdns3/gadget.c | 4 ++-- fs/ecryptfs/crypto.c | 2 +- fs/gfs2/log.c | 2 +- fs/nilfs2/btree.c | 2 +- fs/nilfs2/cpfile.c | 4 ++-- fs/nilfs2/sufile.c | 2 +- kernel/bpf/cgroup.c | 2 +- kernel/stacktrace.c | 2 +- lib/lru_cache.c | 2 +- mm/sparse-vmemmap.c | 2 +- net/netfilter/nf_tables_api.c | 8 ++++---- net/nfc/nci/core.c | 4 ++-- net/tipc/msg.c | 2 +- sound/ac97/bus.c | 4 ++-- sound/soc/uniphier/aio-core.c | 3 +-- 63 files changed, 100 insertions(+), 102 deletions(-) diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index f70d561f37f7..eebc74384d5d 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -179,7 +179,7 @@ u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs, /** * rx51_secure_update_aux_cr: Routine to modify the contents of Auxiliary Control Register * @set_bits: bits to set in ACR - * @clr_bits: bits to clear in ACR + * @clear_bits: bits to clear in ACR * * Return the non-zero error value on failure. */ diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c index 97c0e333e3b9..cf345d3a08cd 100644 --- a/arch/arm/mach-prima2/rtciobrg.c +++ b/arch/arm/mach-prima2/rtciobrg.c @@ -127,7 +127,7 @@ static struct regmap_bus regmap_iobg = { /** * devm_regmap_init_iobg(): Initialise managed register map * - * @iobg: Device that will be interacted with + * @dev: Device that will be interacted with * @config: Configuration for register map * * The return value will be an ERR_PTR() on error or a valid pointer diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c index f51957a3e915..2654530273e2 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-spi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c @@ -69,9 +69,7 @@ static cvmx_spi_callbacks_t cvmx_spi_callbacks = { /** * Get current SPI4 initialization callbacks * - * @callbacks: Pointer to the callbacks structure.to fill - * - * Returns Pointer to cvmx_spi_callbacks_t structure. + * @callbacks: Pointer to the callbacks structure, to fill. */ void cvmx_spi_get_callbacks(cvmx_spi_callbacks_t *callbacks) { diff --git a/arch/mips/kvm/tlb.c b/arch/mips/kvm/tlb.c index 1c1fbce3f566..639e01c9bca4 100644 --- a/arch/mips/kvm/tlb.c +++ b/arch/mips/kvm/tlb.c @@ -290,7 +290,7 @@ EXPORT_SYMBOL_GPL(kvm_vz_host_tlb_inv); /** * kvm_vz_guest_tlb_lookup() - Lookup a guest VZ TLB mapping. * @vcpu: KVM VCPU pointer. - * @gpa: Guest virtual address in a TLB mapped guest segment. + * @gva: Guest virtual address in a TLB mapped guest segment. * @gpa: Ponter to output guest physical address it maps to. * * Converts a guest virtual address in a guest TLB mapped segment to a guest diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index a5f3e50fe976..9464e575af43 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -280,7 +280,7 @@ int __init machine_has_merced_bus(void) /** * find_pa_parent_type - Find a parent of a specific type - * @dev: The device to start searching from + * @padev: The device to start searching from * @type: The device type to search for. * * Walks up the device tree looking for a device of the specified type. diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index 177852e39a25..569e3772429c 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -592,7 +592,7 @@ EXPORT_SYMBOL_GPL(eeh_pe_state_mark); /** * eeh_pe_mark_isolated - * @pe: EEH PE + * @root: EEH PE * * Record that a PE has been isolated by marking the PE and it's children as * EEH_PE_ISOLATED (and EEH_PE_CFG_BLOCKED, if required) and their PCI devices @@ -638,7 +638,7 @@ void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode) /** * eeh_pe_state_clear - Clear state for the PE - * @data: EEH PE + * @root: EEH PE * @state: state * @include_passed: include passed-through devices? * diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c index d200e7df7167..ec8eaa334391 100644 --- a/arch/powerpc/kernel/uprobes.c +++ b/arch/powerpc/kernel/uprobes.c @@ -30,8 +30,8 @@ bool is_trap_insn(uprobe_opcode_t *insn) /** * arch_uprobe_analyze_insn + * @auprobe: the probepoint information. * @mm: the probed address space. - * @arch_uprobe: the probepoint information. * @addr: vaddr to probe. * Return 0 on success or a -ve number on error. */ diff --git a/crypto/asymmetric_keys/verify_pefile.c b/crypto/asymmetric_keys/verify_pefile.c index cc9dbcecaaca..5c89ee9dedf5 100644 --- a/crypto/asymmetric_keys/verify_pefile.c +++ b/crypto/asymmetric_keys/verify_pefile.c @@ -387,7 +387,7 @@ static int pefile_digest_pe(const void *pebuf, unsigned int pelen, * verify_pefile_signature - Verify the signature on a PE binary image * @pebuf: Buffer containing the PE binary image * @pelen: Length of the binary image - * @trust_keys: Signing certificate(s) to use as starting points + * @trusted_keys: Signing certificate(s) to use as starting points * @usage: The use to which the key is being put. * * Validate that the certificate chain inside the PKCS#7 message inside the PE diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c index 6a40e3c6cf49..3c7c97d2d44a 100644 --- a/drivers/ata/libata-transport.c +++ b/drivers/ata/libata-transport.c @@ -250,7 +250,7 @@ static int ata_tport_match(struct attribute_container *cont, /** * ata_tport_delete -- remove ATA PORT - * @port: ATA PORT to remove + * @ap: ATA PORT to remove * * Removes the specified ATA PORT. Remove the associated link as well. */ @@ -376,7 +376,7 @@ static int ata_tlink_match(struct attribute_container *cont, /** * ata_tlink_delete -- remove ATA LINK - * @port: ATA LINK to remove + * @link: ATA LINK to remove * * Removes the specified ATA LINK. remove associated ATA device(s) as well. */ diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 92073ac68473..87247951a839 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -1021,7 +1021,7 @@ bool pm_save_wakeup_count(unsigned int count) #ifdef CONFIG_PM_AUTOSLEEP /** * pm_wakep_autosleep_enabled - Modify autosleep_enabled for all wakeup sources. - * @enabled: Whether to set or to clear the autosleep_enabled flags. + * @set: Whether to set or to clear the autosleep_enabled flags. */ void pm_wakep_autosleep_enabled(bool set) { diff --git a/drivers/bus/fsl-mc/mc-io.c b/drivers/bus/fsl-mc/mc-io.c index 6ae48ad80409..f88cb7e911bd 100644 --- a/drivers/bus/fsl-mc/mc-io.c +++ b/drivers/bus/fsl-mc/mc-io.c @@ -55,7 +55,7 @@ static void fsl_mc_io_unset_dpmcp(struct fsl_mc_io *mc_io) * @dev: device to be associated with the MC I/O object * @mc_portal_phys_addr: physical address of the MC portal to use * @mc_portal_size: size in bytes of the MC portal - * @dpmcp-dev: Pointer to the DPMCP object associated with this MC I/O + * @dpmcp_dev: Pointer to the DPMCP object associated with this MC I/O * object or NULL if none. * @flags: flags for the new MC I/O object * @new_mc_io: Area to return pointer to newly created MC I/O object diff --git a/drivers/crypto/bcm/spu.c b/drivers/crypto/bcm/spu.c index e7562e9bf396..03f73fa1740d 100644 --- a/drivers/crypto/bcm/spu.c +++ b/drivers/crypto/bcm/spu.c @@ -519,7 +519,7 @@ u32 spum_assoc_resp_len(enum spu_cipher_mode cipher_mode, * spu_aead_ivlen() - Calculate the length of the AEAD IV to be included * in a SPU request after the AAD and before the payload. * @cipher_mode: cipher mode - * @iv_ctr_len: initialization vector length in bytes + * @iv_len: initialization vector length in bytes * * In Linux ~4.2 and later, the assoc_data sg includes the IV. So no need * to include the IV as a separate field in the SPU request msg. @@ -917,7 +917,7 @@ u16 spum_cipher_req_init(u8 *spu_hdr, struct spu_cipher_parms *cipher_parms) * setkey() time in spu_cipher_req_init(). * @spu_hdr: Start of the request message header (MH field) * @spu_req_hdr_len: Length in bytes of the SPU request header - * @isInbound: 0 encrypt, 1 decrypt + * @is_inbound: 0 encrypt, 1 decrypt * @cipher_parms: Parameters describing cipher operation to be performed * @update_key: If true, rewrite the cipher key in SCTX * @data_size: Length of the data in the BD field diff --git a/drivers/crypto/qat/qat_common/adf_dev_mgr.c b/drivers/crypto/qat/qat_common/adf_dev_mgr.c index 2d06409bd3c4..19f54da9c622 100644 --- a/drivers/crypto/qat/qat_common/adf_dev_mgr.c +++ b/drivers/crypto/qat/qat_common/adf_dev_mgr.c @@ -329,7 +329,7 @@ struct adf_accel_dev *adf_devmgr_get_first(void) /** * adf_devmgr_pci_to_accel_dev() - Get accel_dev associated with the pci_dev. - * @accel_dev: Pointer to pci device. + * @pci_dev: Pointer to pci device. * * Function returns acceleration device associated with the given pci device. * To be used by QAT device specific drivers. diff --git a/drivers/gpu/drm/omapdrm/omap_gem.c b/drivers/gpu/drm/omapdrm/omap_gem.c index d08ae95ecc0a..e39a2d6721fb 100644 --- a/drivers/gpu/drm/omapdrm/omap_gem.c +++ b/drivers/gpu/drm/omapdrm/omap_gem.c @@ -580,7 +580,7 @@ int omap_gem_mmap_obj(struct drm_gem_object *obj, /** * omap_gem_dumb_create - create a dumb buffer - * @drm_file: our client file + * @file: our client file * @dev: our device * @args: the requested arguments copied from userspace * diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 24c8db673931..a72f4f549c32 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1409,7 +1409,7 @@ int r100_cs_parse_packet0(struct radeon_cs_parser *p, /** * r100_cs_packet_next_vline() - parse userspace VLINE packet - * @parser: parser structure holding parsing context. + * @p: parser structure holding parsing context. * * Userspace sends a special sequence for VLINE waits. * PACKET0 - VLINE_START_END + value diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index c5d1dc9618a4..e59e46fdb6e2 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -56,7 +56,6 @@ static inline bool radeon_has_atpx(void) { return false; } * It calls radeon_modeset_fini() to tear down the * displays, and radeon_device_fini() to tear down * the rest of the device (CP, writeback, etc.). - * Returns 0 on success. */ void radeon_driver_unload_kms(struct drm_device *dev) { diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 359616e3efbb..5b748505c923 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -920,7 +920,7 @@ static int hid_scan_report(struct hid_device *hid) /** * hid_parse_report - parse device report * - * @device: hid device + * @hid: hid device * @start: report start * @size: report size * @@ -945,7 +945,7 @@ static const char * const hid_report_names[] = { /** * hid_validate_values - validate existing device report's value indexes * - * @device: hid device + * @hid: hid device * @type: which report type to examine * @id: which report ID to examine (0 for first) * @field_index: which report field to examine diff --git a/drivers/iio/dummy/iio_simple_dummy_buffer.c b/drivers/iio/dummy/iio_simple_dummy_buffer.c index 17606eca42b4..daf66ec6ebac 100644 --- a/drivers/iio/dummy/iio_simple_dummy_buffer.c +++ b/drivers/iio/dummy/iio_simple_dummy_buffer.c @@ -179,7 +179,7 @@ int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev) /** * iio_simple_dummy_unconfigure_buffer() - release buffer resources - * @indo_dev: device instance state + * @indio_dev: device instance state */ void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev) { diff --git a/drivers/infiniband/core/roce_gid_mgmt.c b/drivers/infiniband/core/roce_gid_mgmt.c index 2860def84f4d..5bdf3850fe28 100644 --- a/drivers/infiniband/core/roce_gid_mgmt.c +++ b/drivers/infiniband/core/roce_gid_mgmt.c @@ -505,7 +505,7 @@ static void enum_all_gids_of_dev_cb(struct ib_device *ib_dev, * rdma_roce_rescan_device - Rescan all of the network devices in the system * and add their gids, as needed, to the relevant RoCE devices. * - * @device: the rdma device + * @ib_dev: the rdma device */ void rdma_roce_rescan_device(struct ib_device *ib_dev) { diff --git a/drivers/infiniband/hw/i40iw/i40iw_hmc.c b/drivers/infiniband/hw/i40iw/i40iw_hmc.c index 5484cbf55f0f..02dc1b0e4b9f 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_hmc.c +++ b/drivers/infiniband/hw/i40iw/i40iw_hmc.c @@ -782,9 +782,9 @@ enum i40iw_status_code i40iw_prep_remove_pd_page(struct i40iw_hmc_info *hmc_info /** * i40iw_pf_init_vfhmc - - * @vf_cnt_array: array of cnt values of iwarp hmc objects - * @vf_hmc_fn_id: hmc function id ofr vf driver * @dev: pointer to i40iw_dev struct + * @vf_hmc_fn_id: hmc function id ofr vf driver + * @vf_cnt_array: array of cnt values of iwarp hmc objects * * Called by pf driver to initialize hmc_info for vf driver instance. */ diff --git a/drivers/infiniband/hw/qib/qib_driver.c b/drivers/infiniband/hw/qib/qib_driver.c index 92eeea5679e2..84fc4dcc5399 100644 --- a/drivers/infiniband/hw/qib/qib_driver.c +++ b/drivers/infiniband/hw/qib/qib_driver.c @@ -151,7 +151,7 @@ int qib_count_units(int *npresentp, int *nupp) /** * qib_wait_linkstate - wait for an IB link state change to occur - * @dd: the qlogic_ib device + * @ppd: the qlogic_ib device * @state: the state to wait for * @msecs: the number of milliseconds to wait * diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c index ea3ddb05cbad..c3443a4fede5 100644 --- a/drivers/infiniband/hw/qib/qib_iba7220.c +++ b/drivers/infiniband/hw/qib/qib_iba7220.c @@ -4468,7 +4468,7 @@ static int qib_7220_eeprom_wen(struct qib_devdata *dd, int wen) /** * qib_init_iba7220_funcs - set up the chip-specific function pointers - * @dev: the pci_dev for qlogic_ib device + * @pdev: the pci_dev for qlogic_ib device * @ent: pci_device_id struct for this dev * * This is global, and is called directly at init to set up the diff --git a/drivers/infiniband/sw/rdmavt/srq.c b/drivers/infiniband/sw/rdmavt/srq.c index f547c115af03..7d1e283101c1 100644 --- a/drivers/infiniband/sw/rdmavt/srq.c +++ b/drivers/infiniband/sw/rdmavt/srq.c @@ -67,7 +67,7 @@ void rvt_driver_srq_init(struct rvt_dev_info *rdi) /** * rvt_create_srq - create a shared receive queue - * @ibpd: the protection domain of the SRQ to create + * @ibsrq: the protection domain of the SRQ to create * @srq_init_attr: the attributes of the SRQ * @udata: data from libibverbs when creating a user SRQ * diff --git a/drivers/leds/trigger/ledtrig-cpu.c b/drivers/leds/trigger/ledtrig-cpu.c index 869976d1b734..9d272bc270b6 100644 --- a/drivers/leds/trigger/ledtrig-cpu.c +++ b/drivers/leds/trigger/ledtrig-cpu.c @@ -39,7 +39,7 @@ static atomic_t num_active_cpus = ATOMIC_INIT(0); /** * ledtrig_cpu - emit a CPU event as a trigger - * @evt: CPU event to be emitted + * @ledevt: CPU event to be emitted * * Emit a CPU event on a CPU core, which will trigger a * bound LED to turn on or turn off. diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c index 1fa2ec950e7d..f42d3cc72693 100644 --- a/drivers/mfd/atmel-smc.c +++ b/drivers/mfd/atmel-smc.c @@ -255,9 +255,9 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply); /** * atmel_hsmc_cs_conf_apply - apply an SMC CS conf * @regmap: the HSMC regmap - * @cs: the CS id * @layout: the layout of registers - * @conf the SMC CS conf to apply + * @cs: the CS id + * @conf: the SMC CS conf to apply * * Applies an SMC CS configuration. * Only valid on post-sama5 SoCs. @@ -296,8 +296,8 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get); /** * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf * @regmap: the HSMC regmap - * @cs: the CS id * @layout: the layout of registers + * @cs: the CS id * @conf: the SMC CS conf object to store the current conf * * Retrieve the SMC CS configuration. diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index 3c2d405bc79b..f39829a7f3eb 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -266,7 +266,7 @@ static const struct attribute_group *enclosure_component_groups[]; /** * enclosure_component_alloc - prepare a new enclosure component * @edev: the enclosure to add the component - * @num: the device number + * @number: the device number * @type: the type of component being added * @name: an optional name to appear in sysfs (leave NULL if none) * @@ -347,7 +347,7 @@ EXPORT_SYMBOL_GPL(enclosure_component_register); /** * enclosure_add_device - add a device as being part of an enclosure * @edev: the enclosure device being added to. - * @num: the number of the component + * @component: the number of the component * @dev: the device being added * * Declares a real device to reside in slot (or identifier) @num of an diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 31e43a2197a3..bf4eb83cd77f 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2500,7 +2500,7 @@ void bond_3ad_adapter_speed_duplex_changed(struct slave *slave) /** * bond_3ad_handle_link_change - handle a slave's link status change indication * @slave: slave struct to work on - * @status: whether the link is now up or down + * @link: whether the link is now up or down * * Handle reselection of aggregator (if needed) for this port. */ diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 004919aea5fb..893d4c6cef93 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -855,7 +855,7 @@ static bool bond_should_notify_peers(struct bonding *bond) /** * change_active_interface - change the active slave into the specified one * @bond: our bonding struct - * @new: the new slave to make the active one + * @new_active: the new slave to make the active one * * Set the new slave to the bond's settings and unset them on the old * curr_active_slave. diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index ee9e9290f112..3f07ec78530b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -4229,8 +4229,8 @@ void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default) /** * bnx2x_setup_tc - routine to configure net_device for multi tc * - * @netdev: net device to configure - * @tc: number of traffic classes to enable + * @dev: net device to configure + * @num_tc: number of traffic classes to enable * * callback connected to the ndo_setup_tc function pointer */ diff --git a/drivers/net/ethernet/freescale/dpaa2/dpni.c b/drivers/net/ethernet/freescale/dpaa2/dpni.c index 6b479ba66465..69c8940d1069 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpni.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c @@ -1558,10 +1558,10 @@ int dpni_get_statistics(struct fsl_mc_io *mc_io, * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' * @token: Token of DPNI object * @cg_point: Congestion point - * @q_type: Queue type on which the taildrop is configured. + * @qtype: Queue type on which the taildrop is configured. * Only Rx queues are supported for now * @tc: Traffic class to apply this taildrop to - * @q_index: Index of the queue if the DPNI supports multiple queues for + * @index: Index of the queue if the DPNI supports multiple queues for * traffic distribution. Ignored if CONGESTION_POINT is not 0. * @taildrop: Taildrop structure * diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c index f151d6e111dd..acee93d0d860 100644 --- a/drivers/net/ethernet/freescale/fman/fman.c +++ b/drivers/net/ethernet/freescale/fman/fman.c @@ -2092,7 +2092,7 @@ EXPORT_SYMBOL(fman_register_intr); /** * fman_unregister_intr * @fman: A Pointer to FMan device - * @mod: Calling module + * @module: Calling module * @mod_id: Module id (if more than 1 exists, '0' if not) * @intr_type: Interrupt type (error/normal) selection. * @@ -2509,7 +2509,7 @@ EXPORT_SYMBOL(fman_get_rx_extra_headroom); /** * fman_bind - * @dev: FMan OF device pointer + * @fm_dev: FMan OF device pointer * * Bind to a specific FMan device. * diff --git a/drivers/net/net_failover.c b/drivers/net/net_failover.c index fb182bec8f06..2a4892402ed8 100644 --- a/drivers/net/net_failover.c +++ b/drivers/net/net_failover.c @@ -697,7 +697,7 @@ static struct failover_ops net_failover_ops = { /** * net_failover_create - Create and register a failover instance * - * @dev: standby netdev + * @standby_dev: standby netdev * * Creates a failover netdev and registers a failover instance for a standby * netdev. Used by paravirtual drivers that use 3-netdev model. diff --git a/drivers/net/wireless/marvell/libertas/firmware.c b/drivers/net/wireless/marvell/libertas/firmware.c index 69029c59a272..d5f1cb49b946 100644 --- a/drivers/net/wireless/marvell/libertas/firmware.c +++ b/drivers/net/wireless/marvell/libertas/firmware.c @@ -121,12 +121,12 @@ void lbs_wait_for_firmware_load(struct lbs_private *priv) * either a helper firmware and a main firmware (2-stage), or just the helper. * * @priv: Pointer to lbs_private instance - * @dev: A pointer to &device structure + * @device: A pointer to &device structure * @card_model: Bus-specific card model ID used to filter firmware table * elements * @fw_table: Table of firmware file names and device model numbers * terminated by an entry with a NULL helper name - * @callback: User callback to invoke when firmware load succeeds or fails. + * @callback: User callback to invoke when firmware load succeeds or fails. */ int lbs_get_firmware_async(struct lbs_private *priv, struct device *device, u32 card_model, const struct lbs_fw_table *fw_table, diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c index d863ab4a66c9..3c4462487ab5 100644 --- a/drivers/net/wireless/mediatek/mt7601u/phy.c +++ b/drivers/net/wireless/mediatek/mt7601u/phy.c @@ -1210,7 +1210,7 @@ void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path) /** * mt7601u_set_tx_dac - set which tx DAC to use * @dev: pointer to adapter structure - * @path: DAC index, values are 0-based + * @dac: DAC index, values are 0-based */ void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac) { diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 6ef8fc9ae627..561f49336178 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -825,7 +825,7 @@ int wl12xx_cmd_role_start_ibss(struct wl1271 *wl, struct wl12xx_vif *wlvif) * * @wl: wl struct * @buf: buffer containing the command, with all headers, must work with dma - * @len: length of the buffer + * @buf_len: length of the buffer * @answer: is answer needed */ int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) diff --git a/drivers/of/address.c b/drivers/of/address.c index 8eea3f6e29a4..381dc9be7b22 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -864,7 +864,7 @@ EXPORT_SYMBOL_GPL(of_address_to_resource); /** * of_iomap - Maps the memory mapped IO for a given device_node - * @device: the device whose io range will be mapped + * @np: the device whose io range will be mapped * @index: index of the io range * * Returns a pointer to the mapped memory diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 5ac31f683b85..c19fa78b56bb 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -388,8 +388,8 @@ static struct hotplug_slot *get_slot_from_name(const char *name) /** * __pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem - * @bus: bus this slot is on * @slot: pointer to the &struct hotplug_slot to register + * @bus: bus this slot is on * @devnr: device number * @name: name registered with kobject core * @owner: caller module owner diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 821242bb4b16..44ee5d70623e 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -161,7 +161,7 @@ int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name) /** * pin_get_name_from_id() - look up a pin name from a pin id * @pctldev: the pin control device to lookup the pin on - * @name: the name of the pin to look up + * @pin: the name of the pin to look up */ const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin) { @@ -577,7 +577,7 @@ EXPORT_SYMBOL_GPL(pinctrl_generic_get_group_pins); /** * pinctrl_generic_get_group() - returns a pin group based on the number * @pctldev: pin controller device - * @gselector: group number + * @selector: group number */ struct group_desc *pinctrl_generic_get_group(struct pinctrl_dev *pctldev, unsigned int selector) @@ -1451,7 +1451,7 @@ EXPORT_SYMBOL_GPL(pinctrl_register_mappings); /** * pinctrl_unregister_mappings() - unregister a set of pin controller mappings - * @maps: the pincontrol mappings table passed to pinctrl_register_mappings() + * @map: the pincontrol mappings table passed to pinctrl_register_mappings() * when registering the mappings. */ void pinctrl_unregister_mappings(const struct pinctrl_map *map) diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c index 02b37fe6061c..595e030034d4 100644 --- a/drivers/power/supply/power_supply_core.c +++ b/drivers/power/supply/power_supply_core.c @@ -733,7 +733,7 @@ EXPORT_SYMBOL_GPL(power_supply_put_battery_info); * percent * @table: Pointer to battery resistance temperature table * @table_len: The table length - * @ocv: Current temperature + * @temp: Current temperature * * This helper function is used to look up battery internal resistance percent * according to current temperature value from the resistance temperature table, diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index e53ebc5eff85..6b558bdc9dec 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -181,7 +181,7 @@ int bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) /** * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer - * @conn: iscsi connection on which RQ event occurred + * @bnx2i_conn: iscsi connection on which RQ event occurred * @ptr: driver buffer to which RQ buffer contents is to * be copied * @len: length of valid data inside RQ buf @@ -223,7 +223,7 @@ static void bnx2i_ring_577xx_doorbell(struct bnx2i_conn *conn) /** * bnx2i_put_rq_buf - Replenish RQ buffer, if required ring on chip doorbell - * @conn: iscsi connection on which event to post + * @bnx2i_conn: iscsi connection on which event to post * @count: number of RQ buffer being posted to chip * * No need to ring hardware doorbell for 57710 family of devices @@ -320,7 +320,7 @@ static void bnx2i_ring_dbell_update_sq_params(struct bnx2i_conn *bnx2i_conn, /** * bnx2i_send_iscsi_login - post iSCSI login request MP WQE to hardware - * @conn: iscsi connection + * @bnx2i_conn: iscsi connection * @cmd: driver command structure which is requesting * a WQE to sent to chip for further processing * @@ -373,7 +373,7 @@ int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn, /** * bnx2i_send_iscsi_tmf - post iSCSI task management request MP WQE to hardware - * @conn: iscsi connection + * @bnx2i_conn: iscsi connection * @mtask: driver command structure which is requesting * a WQE to sent to chip for further processing * @@ -447,7 +447,7 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn, /** * bnx2i_send_iscsi_text - post iSCSI text WQE to hardware - * @conn: iscsi connection + * @bnx2i_conn: iscsi connection * @mtask: driver command structure which is requesting * a WQE to sent to chip for further processing * @@ -495,7 +495,7 @@ int bnx2i_send_iscsi_text(struct bnx2i_conn *bnx2i_conn, /** * bnx2i_send_iscsi_scsicmd - post iSCSI scsicmd request WQE to hardware - * @conn: iscsi connection + * @bnx2i_conn: iscsi connection * @cmd: driver command structure which is requesting * a WQE to sent to chip for further processing * @@ -517,7 +517,7 @@ int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *bnx2i_conn, /** * bnx2i_send_iscsi_nopout - post iSCSI NOPOUT request WQE to hardware - * @conn: iscsi connection + * @bnx2i_conn: iscsi connection * @cmd: driver command structure which is requesting * a WQE to sent to chip for further processing * @datap: payload buffer pointer @@ -579,7 +579,7 @@ int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn, /** * bnx2i_send_iscsi_logout - post iSCSI logout request WQE to hardware - * @conn: iscsi connection + * @bnx2i_conn: iscsi connection * @cmd: driver command structure which is requesting * a WQE to sent to chip for further processing * diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 1df45f028ea7..c98c8dc6283c 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -115,9 +115,9 @@ static u32 sci_port_get_phys(struct isci_port *iport) /** * sci_port_get_properties() - This method simply returns the properties * regarding the port, such as: physical index, protocols, sas address, etc. - * @port: this parameter specifies the port for which to retrieve the physical + * @iport: this parameter specifies the port for which to retrieve the physical * index. - * @properties: This parameter specifies the properties structure into which to + * @prop: This parameter specifies the properties structure into which to * copy the requested information. * * Indicate if the user specified a valid port. SCI_SUCCESS This value is @@ -742,8 +742,8 @@ static bool sci_port_is_wide(struct isci_port *iport) * port wants the PHY to continue on to the link up state then the port * layer must return true. If the port object returns false the phy object * must halt its attempt to go link up. - * @sci_port: The port associated with the phy object. - * @sci_phy: The phy object that is trying to go link up. + * @iport: The port associated with the phy object. + * @iphy: The phy object that is trying to go link up. * * true if the phy object can continue to the link up condition. true Is * returned if this phy can continue to the ready state. false Is returned if @@ -1186,8 +1186,8 @@ static enum sci_status sci_port_hard_reset(struct isci_port *iport, u32 timeout) /** * sci_port_add_phy() - - * @sci_port: This parameter specifies the port in which the phy will be added. - * @sci_phy: This parameter is the phy which is to be added to the port. + * @iport: This parameter specifies the port in which the phy will be added. + * @iphy: This parameter is the phy which is to be added to the port. * * This method will add a PHY to the selected port. This method returns an * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other @@ -1257,8 +1257,8 @@ enum sci_status sci_port_add_phy(struct isci_port *iport, /** * sci_port_remove_phy() - - * @sci_port: This parameter specifies the port in which the phy will be added. - * @sci_phy: This parameter is the phy which is to be added to the port. + * @iport: This parameter specifies the port in which the phy will be added. + * @iphy: This parameter is the phy which is to be added to the port. * * This method will remove the PHY from the selected PORT. This method returns * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index bf2cc9656e19..e9c596d71768 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1851,7 +1851,7 @@ static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport) /** * fc_queuecommand() - The queuecommand function of the SCSI template * @shost: The Scsi_Host that the command was issued to - * @cmd: The scsi_cmnd to be executed + * @sc_cmd: The scsi_cmnd to be executed * * This is the i/o strategy routine, called by the SCSI layer. */ diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 96b78fdc6b8a..ca90ef4310fc 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5833,7 +5833,7 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout) /** * mpt3sas_wait_for_ioc - IOC's operational state is checked here. * @ioc: per adapter object - * @wait_count: timeout in seconds + * @timeout: timeout in seconds * * Return: Waits up to timeout seconds for the IOC to * become operational. Returns 0 if IOC is present diff --git a/drivers/soc/mediatek/mtk-infracfg.c b/drivers/soc/mediatek/mtk-infracfg.c index 341c7ac250e3..4a123796aad3 100644 --- a/drivers/soc/mediatek/mtk-infracfg.c +++ b/drivers/soc/mediatek/mtk-infracfg.c @@ -19,7 +19,7 @@ /** * mtk_infracfg_set_bus_protection - enable bus protection - * @regmap: The infracfg regmap + * @infracfg: The infracfg regmap * @mask: The mask containing the protection bits to be enabled. * @reg_update: The boolean flag determines to set the protection bits * by regmap_update_bits with enable register(PROTECTEN) or @@ -50,7 +50,7 @@ int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask, /** * mtk_infracfg_clear_bus_protection - disable bus protection - * @regmap: The infracfg regmap + * @infracfg: The infracfg regmap * @mask: The mask containing the protection bits to be disabled. * @reg_update: The boolean flag determines to clear the protection bits * by regmap_update_bits with enable register(PROTECTEN) or diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index a9a72574b34a..3c3af428e360 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1326,9 +1326,9 @@ EXPORT_SYMBOL(sdw_stream_add_master); * * @slave: SDW Slave instance * @stream_config: Stream configuration for audio stream - * @stream: SoundWire stream * @port_config: Port configuration for audio stream * @num_ports: Number of ports + * @stream: SoundWire stream * * It is expected that Slave is added before adding Master * to the Stream. diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c index f77ceae5c7d7..74cb9c713a36 100644 --- a/drivers/thunderbolt/ctl.c +++ b/drivers/thunderbolt/ctl.c @@ -669,6 +669,7 @@ void tb_ctl_free(struct tb_ctl *ctl) /** * tb_cfg_start() - start/resume the control channel + * @ctl: Control channel to use */ void tb_ctl_start(struct tb_ctl *ctl) { @@ -684,6 +685,7 @@ void tb_ctl_start(struct tb_ctl *ctl) /** * control() - pause the control channel + * @ctl: Control channel to use * * All invocations of ctl->callback will have finished after this method * returns. diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index ec145a59f199..647655e68610 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -107,7 +107,7 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size) /** * tty_buffer_free_all - free buffers used by a tty - * @tty: tty to free from + * @port: tty to free from * * Remove all the buffers pending on a tty whether queued with data * or in the free ring. Must be called when the tty is no longer in use @@ -559,7 +559,7 @@ EXPORT_SYMBOL(tty_flip_buffer_push); /** * tty_buffer_init - prepare a tty buffer structure - * @tty: tty to initialise + * @port: tty to initialise * * Set up the initial state of the buffer management for a tty device. * Must be called before the other tty buffer functions are used. diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index ec1f6a48121e..3dd0add2040c 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -542,7 +542,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) /** * tty_set_ldisc - set line discipline * @tty: the terminal to set - * @ldisc: the line discipline + * @disc: the line discipline * * Set the discipline of a tty line. Must be called from a process * context. The ldisc change logic has to protect itself against any diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index 5e24c2e57c0d..ec1bc6e05f38 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -2568,7 +2568,7 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep, /** * __cdns3_gadget_ep_set_halt Sets stall on selected endpoint * Should be called after acquiring spin_lock and selecting ep - * @ep: endpoint object to set stall on. + * @priv_ep: endpoint object to set stall on. */ void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep) { @@ -2589,7 +2589,7 @@ void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep) /** * __cdns3_gadget_ep_clear_halt Clears stall on selected endpoint * Should be called after acquiring spin_lock and selecting ep - * @ep: endpoint object to clear stall on + * @priv_ep: endpoint object to clear stall on */ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep) { diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 0681540c48d9..8ebab784913b 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -629,7 +629,7 @@ void ecryptfs_set_default_sizes(struct ecryptfs_crypt_stat *crypt_stat) /** * ecryptfs_compute_root_iv - * @crypt_stats + * @crypt_stat * * On error, sets the root IV to all 0's. */ diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index 2b05415bbc13..49d28e0f648d 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -1148,7 +1148,7 @@ static inline int gfs2_ail_flush_reqd(struct gfs2_sbd *sdp) /** * gfs2_logd - Update log tail as Active Items get flushed to in-place blocks - * @sdp: Pointer to GFS2 superblock + * @data: Pointer to GFS2 superblock * * Also, periodically check to make sure that we're using the most recent * journal index. diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index 23e043eca237..7efa4b96a81f 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -1841,7 +1841,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *btree, /** * nilfs_btree_convert_and_insert - - * @bmap: + * @btree: * @key: * @ptr: * @keys: diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c index 8d41311b5db4..5b37bf76c5f4 100644 --- a/fs/nilfs2/cpfile.c +++ b/fs/nilfs2/cpfile.c @@ -889,7 +889,7 @@ int nilfs_cpfile_is_snapshot(struct inode *cpfile, __u64 cno) * nilfs_cpfile_change_cpmode - change checkpoint mode * @cpfile: inode of checkpoint file * @cno: checkpoint number - * @status: mode of checkpoint + * @mode: mode of checkpoint * * Description: nilfs_change_cpmode() changes the mode of the checkpoint * specified by @cno. The mode @mode is NILFS_CHECKPOINT or NILFS_SNAPSHOT. @@ -930,7 +930,7 @@ int nilfs_cpfile_change_cpmode(struct inode *cpfile, __u64 cno, int mode) /** * nilfs_cpfile_get_stat - get checkpoint statistics * @cpfile: inode of checkpoint file - * @stat: pointer to a structure of checkpoint statistics + * @cpstat: pointer to a structure of checkpoint statistics * * Description: nilfs_cpfile_get_stat() returns information about checkpoints. * diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c index bf3f8f05c89b..a37cddc301a0 100644 --- a/fs/nilfs2/sufile.c +++ b/fs/nilfs2/sufile.c @@ -549,7 +549,7 @@ int nilfs_sufile_set_segment_usage(struct inode *sufile, __u64 segnum, /** * nilfs_sufile_get_stat - get segment usage statistics * @sufile: inode of segment usage file - * @stat: pointer to a structure of segment usage statistics + * @sustat: pointer to a structure of segment usage statistics * * Description: nilfs_sufile_get_stat() returns information about segment * usage. diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c index 4d76f16524cc..31dd0d050c6d 100644 --- a/kernel/bpf/cgroup.c +++ b/kernel/bpf/cgroup.c @@ -405,8 +405,8 @@ static struct bpf_prog_list *find_attach_entry(struct list_head *progs, * propagate the change to descendants * @cgrp: The cgroup which descendants to traverse * @prog: A program to attach - * @link: A link to attach * @replace_prog: Previously attached program to replace if BPF_F_REPLACE is set + * @link: A link to attach * @type: Type of attach operation * @flags: Option flags * diff --git a/kernel/stacktrace.c b/kernel/stacktrace.c index 2af66e449aa6..a46228e60321 100644 --- a/kernel/stacktrace.c +++ b/kernel/stacktrace.c @@ -127,7 +127,7 @@ EXPORT_SYMBOL_GPL(stack_trace_save); /** * stack_trace_save_tsk - Save a task stack trace into a storage array - * @task: The task to examine + * @tsk: The task to examine * @store: Pointer to storage array * @size: Size of the storage array * @skipnr: Number of entries to skip at the start of the stack trace diff --git a/lib/lru_cache.c b/lib/lru_cache.c index c69ee53d8dde..de881be64374 100644 --- a/lib/lru_cache.c +++ b/lib/lru_cache.c @@ -628,8 +628,8 @@ void lc_set(struct lru_cache *lc, unsigned int enr, int index) /** * lc_dump - Dump a complete LRU cache to seq in textual form. - * @lc: the lru cache to operate on * @seq: the &struct seq_file pointer to seq_printf into + * @lc: the lru cache to operate on * @utext: user supplied additional "heading" or other info * @detail: function pointer the user may provide to dump further details * of the object the lc_element is embedded in. May be NULL. diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c index 0db7738d76e9..2fba70f0e189 100644 --- a/mm/sparse-vmemmap.c +++ b/mm/sparse-vmemmap.c @@ -96,8 +96,8 @@ static unsigned long __meminit vmem_altmap_nr_free(struct vmem_altmap *altmap) /** * altmap_alloc_block_buf - allocate pages from the device page map - * @altmap: device page map * @size: size (in bytes) of the allocation + * @altmap: device page map * * Allocations are aligned to the size of the request. */ diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 073aa1051d43..42f60663640a 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2307,7 +2307,7 @@ static int nf_tables_delchain(struct net *net, struct sock *nlsk, /** * nft_register_expr - register nf_tables expr type - * @ops: expr type + * @type: expr type * * Registers the expr type for use with nf_tables. Returns zero on * success or a negative errno code otherwise. @@ -2326,7 +2326,7 @@ EXPORT_SYMBOL_GPL(nft_register_expr); /** * nft_unregister_expr - unregister nf_tables expr type - * @ops: expr type + * @type: expr type * * Unregisters the expr typefor use with nf_tables. */ @@ -5498,7 +5498,7 @@ struct nft_set_gc_batch *nft_set_gc_batch_alloc(const struct nft_set *set, /** * nft_register_obj- register nf_tables stateful object type - * @obj: object type + * @obj_type: object type * * Registers the object type for use with nf_tables. Returns zero on * success or a negative errno code otherwise. @@ -5517,7 +5517,7 @@ EXPORT_SYMBOL_GPL(nft_register_obj); /** * nft_unregister_obj - unregister nf_tables object type - * @obj: object type + * @obj_type: object type * * Unregisters the object type for use with nf_tables. */ diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c index 7cd524884304..f7b7dc5fe84a 100644 --- a/net/nfc/nci/core.c +++ b/net/nfc/nci/core.c @@ -1182,7 +1182,7 @@ EXPORT_SYMBOL(nci_free_device); /** * nci_register_device - register a nci device in the nfc subsystem * - * @dev: The nci device to register + * @ndev: The nci device to register */ int nci_register_device(struct nci_dev *ndev) { @@ -1246,7 +1246,7 @@ EXPORT_SYMBOL(nci_register_device); /** * nci_unregister_device - unregister a nci device in the nfc subsystem * - * @dev: The nci device to unregister + * @ndev: The nci device to unregister */ void nci_unregister_device(struct nci_dev *ndev) { diff --git a/net/tipc/msg.c b/net/tipc/msg.c index 01b64869a173..1be29ba8ee41 100644 --- a/net/tipc/msg.c +++ b/net/tipc/msg.c @@ -204,8 +204,8 @@ int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf) * tipc_msg_append(): Append data to tail of an existing buffer queue * @hdr: header to be used * @m: the data to be appended - * @mss: max allowable size of buffer * @dlen: size of data to be appended + * @mss: max allowable size of buffer * @txq: queue to appand to * Returns the number og 1k blocks appended or errno value */ diff --git a/sound/ac97/bus.c b/sound/ac97/bus.c index 7985dd8198b6..3aaf621bbc30 100644 --- a/sound/ac97/bus.c +++ b/sound/ac97/bus.c @@ -181,7 +181,7 @@ static int ac97_bus_reset(struct ac97_controller *ac97_ctrl) /** * snd_ac97_codec_driver_register - register an AC97 codec driver - * @dev: AC97 driver codec to register + * @drv: AC97 driver codec to register * * Register an AC97 codec driver to the ac97 bus driver, aka. the AC97 digital * controller. @@ -197,7 +197,7 @@ EXPORT_SYMBOL_GPL(snd_ac97_codec_driver_register); /** * snd_ac97_codec_driver_unregister - unregister an AC97 codec driver - * @dev: AC97 codec driver to unregister + * @drv: AC97 codec driver to unregister * * Unregister a previously registered ac97 codec driver. */ diff --git a/sound/soc/uniphier/aio-core.c b/sound/soc/uniphier/aio-core.c index 9bcba06ba52e..7a68f66653ed 100644 --- a/sound/soc/uniphier/aio-core.c +++ b/sound/soc/uniphier/aio-core.c @@ -94,7 +94,7 @@ void aio_iecout_set_enable(struct uniphier_aio_chip *chip, bool enable) /** * aio_chip_set_pll - set frequency to audio PLL * @chip : the AIO chip pointer - * @source: PLL + * @pll_id: PLL * @freq : frequency in Hz, 0 is ignored * * Sets frequency of audio PLL. This function can be called anytime, @@ -267,7 +267,6 @@ void aio_port_reset(struct uniphier_aio_sub *sub) /** * aio_port_set_ch - set channels of LPCM * @sub: the AIO substream pointer, PCM substream only - * @ch : count of channels * * Set suitable slot selecting to input/output port block of AIO. * -- 2.17.1