kernel-janitors.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Martin Kaiser <martin@kaiser.cx>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev, kernel-janitors@vger.kernel.org,
	linux-kernel@vger.kernel.org, Martin Kaiser <martin@kaiser.cx>
Subject: [PATCH 07/13] staging: rtl8188eu: remove RT_TRACE and MSG_88E prints from usb_halinit.c
Date: Sun, 20 Jun 2021 19:52:55 +0200	[thread overview]
Message-ID: <20210620175301.14988-7-martin@kaiser.cx> (raw)
In-Reply-To: <20210620175301.14988-1-martin@kaiser.cx>

Eventually, all driver-specific debug prints should be removed.
Take another step in that direction.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
 drivers/staging/rtl8188eu/hal/usb_halinit.c | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index dcdf868b394d..3ecc0186fea0 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -664,7 +664,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
 	HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
 	status = rtw_hal_power_on(Adapter);
 	if (status == _FAIL) {
-		RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n"));
 		goto exit;
 	}
 
@@ -704,7 +703,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
 			Adapter->bFWReady = false;
 			return status;
 		}
-		RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("Initializeadapt8192CSdio(): Download Firmware Success!!\n"));
 		Adapter->bFWReady = true;
 	}
 	rtl8188e_InitializeFirmwareVars(Adapter);
@@ -725,7 +723,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
 	HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
 	status =  InitLLTTable(Adapter, txpktbuf_bndy);
 	if (status == _FAIL) {
-		RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n"));
 		goto exit;
 	}
 
@@ -861,8 +858,6 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
 {
 	u8 val8;
 
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("%s\n", __func__));
-
 	/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
 	val8 = usb_read8(Adapter, REG_TX_RPT_CTRL);
 	usb_write8(Adapter, REG_TX_RPT_CTRL, val8 & (~BIT(1)));
@@ -954,14 +949,10 @@ u32 rtw_hal_inirp_init(struct adapter *Adapter)
 
 	status = _SUCCESS;
 
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 ("===> usb_inirp_init\n"));
-
 	/* issue Rx irp to receive data */
 	precvbuf = precvpriv->precv_buf;
 	for (i = 0; i < NR_RECVBUFF; i++) {
 		if (!usb_read_port(Adapter, RECV_BULK_IN_ADDR, precvbuf)) {
-			RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("usb_rx_init: usb_read_port error\n"));
 			status = _FAIL;
 			goto exit;
 		}
@@ -970,9 +961,6 @@ u32 rtw_hal_inirp_init(struct adapter *Adapter)
 	}
 
 exit:
-
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("<=== usb_inirp_init\n"));
-
 	return status;
 }
 
@@ -1016,8 +1004,6 @@ static void Hal_EfuseParseMACAddr_8188EU(struct adapter *adapt, u8 *hwinfo, bool
 		/* Read Permanent MAC address */
 		memcpy(eeprom->mac_addr, &hwinfo[EEPROM_MAC_ADDR_88EU], ETH_ALEN);
 	}
-	RT_TRACE(_module_hci_hal_init_c_, _drv_notice_,
-		 ("%s: Permanent Address = %pM\n", __func__, eeprom->mac_addr));
 }
 
 static void readAdapterInfo_8188EU(struct adapter *adapt)
@@ -1056,14 +1042,7 @@ static void _ReadPROMContent(struct adapter *Adapter)
 
 void rtw_hal_read_chip_info(struct adapter *Adapter)
 {
-	unsigned long start = jiffies;
-
-	MSG_88E("====> %s\n", __func__);
-
 	_ReadPROMContent(Adapter);
-
-	MSG_88E("<==== %s in %d ms\n", __func__,
-		jiffies_to_msecs(jiffies - start));
 }
 
 #define GPIO_DEBUG_PORT_NUM 0
-- 
2.20.1


  parent reply	other threads:[~2021-06-20 17:53 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-20 17:52 [PATCH 01/13] staging: rtl8188eu: handle errors from dev_alloc_name Martin Kaiser
2021-06-20 17:52 ` [PATCH 02/13] staging: rtl8188eu: remove RT_TRACE prints from usb_intf.c Martin Kaiser
2021-06-20 17:52 ` [PATCH 03/13] staging: rtl8188eu: remove RT_TRACE prints from rtl8188e_hal_init.c Martin Kaiser
2021-06-20 17:52 ` [PATCH 04/13] staging: rtl8188eu: remove a couple of unused defines Martin Kaiser
2021-06-20 17:52 ` [PATCH 05/13] staging: rtl8188eu: remove efuse type Martin Kaiser
2021-06-20 17:52 ` [PATCH 06/13] staging: rtl8188eu: remove unnecessary if clause Martin Kaiser
2021-06-20 17:52 ` Martin Kaiser [this message]
2021-06-20 17:52 ` [PATCH 08/13] staging: rtl8188eu: remove HAL_INIT_PROFILE_TAG Martin Kaiser
2021-06-20 17:52 ` [PATCH 09/13] staging: rtl8188eu: simplify rtl88eu_mon_init Martin Kaiser
2021-06-20 17:52 ` [PATCH 10/13] staging: rtl8188eu: remove RT_TRACE prints from pwrseqcmd.c Martin Kaiser
2021-06-20 17:52 ` [PATCH 11/13] staging: rtl8188eu: make efuse_ReadEFuse static Martin Kaiser
2021-06-20 17:53 ` [PATCH 12/13] staging: rtl8188eu: remove sdio defines Martin Kaiser
2021-06-20 17:53 ` [PATCH 13/13] staging: rtl8188eu: remove more unused defines Martin Kaiser

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210620175301.14988-7-martin@kaiser.cx \
    --to=martin@kaiser.cx \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).