* [PATCH][next] octeontx2-af: Fix a handful of spelling mistakes and typos
@ 2021-07-06 8:49 Colin King
0 siblings, 0 replies; only message in thread
From: Colin King @ 2021-07-06 8:49 UTC (permalink / raw)
To: Sunil Goutham, Linu Cherian, Geetha sowjanya, Jerin Jacob,
hariprasad, Subbaraya Sundeep, David S . Miller, Jakub Kicinski,
netdev
Cc: kernel-janitors, linux-kernel
From: Colin Ian King <colin.king@canonical.com>
There are quite a few spelling mistakes in dev_err error messages
and comments. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 4 ++--
drivers/net/ethernet/marvell/octeontx2/af/ptp.c | 4 ++--
.../ethernet/marvell/octeontx2/af/rvu_cn10k.c | 10 +++++-----
.../ethernet/marvell/octeontx2/af/rvu_debugfs.c | 4 ++--
.../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 16 ++++++++--------
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 12 ++++++------
6 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index 9169849881bf..7b548bd7238c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -972,7 +972,7 @@ static int cgx_link_usertable_index_map(int speed)
static void set_mod_args(struct cgx_set_link_mode_args *args,
u32 speed, u8 duplex, u8 autoneg, u64 mode)
{
- /* Fill default values incase of user did not pass
+ /* Fill default values in case of user did not pass
* valid parameters
*/
if (args->duplex == DUPLEX_UNKNOWN)
@@ -1183,7 +1183,7 @@ static irqreturn_t cgx_fwi_event_handler(int irq, void *data)
/* Ensure response is updated before thread context starts */
smp_wmb();
- /* There wont be separate events for link change initiated from
+ /* There won't be separate events for link change initiated from
* software; Hence report the command responses as events
*/
if (cgx_cmdresp_is_linkevent(event))
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
index 1ee37853f338..4ceda6cdacf9 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
@@ -117,7 +117,7 @@ static int ptp_adjfine(struct ptp *ptp, long scaled_ppm)
/* The hardware adds the clock compensation value to the PTP clock
* on every coprocessor clock cycle. Typical convention is that it
- * represent number of nanosecond betwen each cycle. In this
+ * represent number of nanosecond between each cycle. In this
* convention compensation value is in 64 bit fixed-point
* representation where upper 32 bits are number of nanoseconds
* and lower is fractions of nanosecond.
@@ -127,7 +127,7 @@ static int ptp_adjfine(struct ptp *ptp, long scaled_ppm)
* arithmetic on following formula
* comp = tbase + tbase * scaled_ppm / (1M * 2^16)
* where tbase is the basic compensation value calculated
- * initialy in the probe function.
+ * initially in the probe function.
*/
comp = ((u64)1000000000ull << 32) / ptp->clock_rate;
/* convert scaled_ppm to ppb */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c
index 8d48b64485c6..cd8c07e14c28 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c
@@ -62,7 +62,7 @@ static int rvu_get_lmtaddr(struct rvu *rvu, u16 pcifunc,
int err;
if (!iova) {
- dev_err(rvu->dev, "%s Requested Null address for transulation\n", __func__);
+ dev_err(rvu->dev, "%s Requested Null address for translation\n", __func__);
return -EINVAL;
}
@@ -74,12 +74,12 @@ static int rvu_get_lmtaddr(struct rvu *rvu, u16 pcifunc,
err = rvu_poll_reg(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_RSP_STS, BIT_ULL(0), false);
if (err) {
- dev_err(rvu->dev, "%s LMTLINE iova transulation failed\n", __func__);
+ dev_err(rvu->dev, "%s LMTLINE iova translation failed\n", __func__);
return err;
}
val = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_RSP_STS);
if (val & ~0x1ULL) {
- dev_err(rvu->dev, "%s LMTLINE iova transulation failed err:%llx\n", __func__, val);
+ dev_err(rvu->dev, "%s LMTLINE iova translation failed err:%llx\n", __func__, val);
return -EIO;
}
/* PA[51:12] = RVU_AF_SMMU_TLN_FLIT1[60:21]
@@ -243,7 +243,7 @@ int rvu_set_channels_base(struct rvu *rvu)
/* If programmable channels are present then configure
* channels such that all channel numbers are contiguous
* leaving no holes. This way the new CPT channels can be
- * accomodated. The order of channel numbers assigned is
+ * accommodated. The order of channel numbers assigned is
* LBK, SDP, CGX and CPT.
*/
hw->sdp_chan_base = hw->lbk_chan_base + hw->lbk_links *
@@ -294,7 +294,7 @@ static void rvu_lbk_set_channels(struct rvu *rvu)
u16 chans;
/* To loopback packets between multiple NIX blocks
- * mutliple LBK blocks are needed. With two NIX blocks,
+ * multiple LBK blocks are needed. With two NIX blocks,
* four LBK blocks are needed and each LBK block
* source and destination are as follows:
* LBK0 - source NIX0 and destination NIX1
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
index 370d4ca1e5ed..637d7c0052f2 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
@@ -431,7 +431,7 @@ static void print_npa_qsize(struct seq_file *m, struct rvu_pfvf *pfvf)
/* The 'qsize' entry dumps current Aura/Pool context Qsize
* and each context's current enable/disable status in a bitmap.
*/
-static int rvu_dbg_qsize_display(struct seq_file *filp, void *unsused,
+static int rvu_dbg_qsize_display(struct seq_file *filp, void *unused,
int blktype)
{
void (*print_qsize)(struct seq_file *filp,
@@ -2141,7 +2141,7 @@ static void rvu_print_npc_mcam_info(struct seq_file *s,
}
}
-static int rvu_dbg_npc_mcam_info_display(struct seq_file *filp, void *unsued)
+static int rvu_dbg_npc_mcam_info_display(struct seq_file *filp, void *unused)
{
struct rvu *rvu = filp->private;
int pf, vf, numvfs, blkaddr;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index aeae37704428..a611d43bc09a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -398,11 +398,11 @@ static int rvu_nix_get_bpid(struct rvu *rvu, struct nix_bp_cfg_req *req,
pfvf = rvu_get_pfvf(rvu, req->hdr.pcifunc);
/* Backpressure IDs range division
- * CGX channles are mapped to (0 - 191) BPIDs
- * LBK channles are mapped to (192 - 255) BPIDs
- * SDP channles are mapped to (256 - 511) BPIDs
+ * CGX channels are mapped to (0 - 191) BPIDs
+ * LBK channels are mapped to (192 - 255) BPIDs
+ * SDP channels are mapped to (256 - 511) BPIDs
*
- * Lmac channles and bpids mapped as follows
+ * Lmac channels and bpids mapped as follows
* cgx(0)_lmac(0)_chan(0 - 15) = bpid(0 - 15)
* cgx(0)_lmac(1)_chan(0 - 15) = bpid(16 - 31) ....
* cgx(1)_lmac(0)_chan(0 - 15) = bpid(64 - 79) ....
@@ -1491,7 +1491,7 @@ static int nix_check_txschq_alloc_req(struct rvu *rvu, int lvl, u16 pcifunc,
return 0;
}
- /* Get free SCHQ count and check if request can be accomodated */
+ /* Get free SCHQ count and check if request can be accommodated */
if (hw->cap.nix_fixed_txschq_mapping) {
nix_get_txschq_range(rvu, pcifunc, link, &start, &end);
schq = start + (pcifunc & RVU_PFVF_FUNC_MASK);
@@ -1625,7 +1625,7 @@ int rvu_mbox_handler_nix_txsch_alloc(struct rvu *rvu,
mutex_lock(&rvu->rsrc_lock);
/* Check if request is valid as per HW capabilities
- * and can be accomodated.
+ * and can be accommodated.
*/
for (lvl = 0; lvl < NIX_TXSCH_LVL_CNT; lvl++) {
rc = nix_check_txschq_alloc_req(rvu, lvl, pcifunc, nix_hw, req);
@@ -3041,7 +3041,7 @@ static int reserve_flowkey_alg_idx(struct rvu *rvu, int blkaddr, u32 flow_cfg)
NIX_AF_RX_FLOW_KEY_ALGX_FIELDX(hw->flowkey.in_use,
fid), field[fid]);
- /* Store the flow_cfg for futher lookup */
+ /* Store the flow_cfg for further lookup */
rc = hw->flowkey.in_use;
hw->flowkey.flowkey[rc] = flow_cfg;
hw->flowkey.in_use++;
@@ -3723,7 +3723,7 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw)
(ltdefs->rx_apad1.ltype_match << 4) |
ltdefs->rx_apad1.ltype_mask);
- /* Receive ethertype defination register defines layer
+ /* Receive ethertype definition register defines layer
* information in NPC_RESULT_S to identify the Ethertype
* location in L2 header. Used for Ethertype overwriting
* in inline IPsec flow.
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 3612e0a2cab3..35ef314a8b23 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -1048,7 +1048,7 @@ void npc_enadis_default_mce_entry(struct rvu *rvu, u16 pcifunc,
return;
}
- /* return incase mce list is not enabled */
+ /* return in case mce list is not enabled */
pfvf = rvu_get_pfvf(rvu, pcifunc & ~RVU_PFVF_FUNC_MASK);
if (hw->cap.nix_rx_multicast && is_vf(pcifunc) &&
type != NIXLF_BCAST_ENTRY && !pfvf->use_mce_list)
@@ -2298,7 +2298,7 @@ npc_get_mcam_search_range_priority(struct npc_mcam *mcam,
* - If reference entry is not in hprio zone then
* search range: ref_entry to end.
* - If reference entry is in hprio zone and if
- * request can be accomodated in non-hprio zone then
+ * request can be accommodated in non-hprio zone then
* search range: 'start of middle zone' to 'end'
* - else search in reverse, so that less number of hprio
* zone entries are allocated.
@@ -2325,7 +2325,7 @@ npc_get_mcam_search_range_priority(struct npc_mcam *mcam,
* - If reference entry is not in lprio zone then
* search range: 0 to ref_entry.
* - If reference entry is in lprio zone and if
- * request can be accomodated in middle zone then
+ * request can be accommodated in middle zone then
* search range: 'hprio_end' to 'lprio_start'
*/
@@ -2376,7 +2376,7 @@ static int npc_mcam_alloc_entries(struct npc_mcam *mcam, u16 pcifunc,
* Reverse bitmap is used to allocate entries
* - when a higher priority entry is requested
* - when available free entries are less.
- * Lower priority ones out of avaialble free entries are always
+ * Lower priority ones out of available free entries are always
* chosen when 'high vs low' question arises.
*/
@@ -2397,7 +2397,7 @@ static int npc_mcam_alloc_entries(struct npc_mcam *mcam, u16 pcifunc,
hp_fcnt = npc_mcam_get_free_count(mcam->bmap, 0, mcam->hprio_end);
fcnt = mcam->bmap_fcnt - lp_fcnt - hp_fcnt;
- /* Check if request can be accomodated in the middle zone */
+ /* Check if request can be accommodated in the middle zone */
if (fcnt > req->count) {
start = mcam->hprio_end;
end = mcam->lprio_start;
@@ -2461,7 +2461,7 @@ static int npc_mcam_alloc_entries(struct npc_mcam *mcam, u16 pcifunc,
}
}
- /* If allocating requested no of entries is unsucessful,
+ /* If allocating requested no of entries is unsuccessful,
* expand the search range to full bitmap length and retry.
*/
if (!req->priority && (rsp->count < req->count) &&
--
2.31.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2021-07-06 8:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-06 8:49 [PATCH][next] octeontx2-af: Fix a handful of spelling mistakes and typos Colin King
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).