kernel-janitors.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
To: alcooperx@gmail.com, balbi@kernel.org,
	gregkh@linuxfoundation.org, f.fainelli@gmail.com
Cc: linux-usb@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com,
	linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Subject: [PATCH 2/2] usb: bdc: Fix a resource leak in the error handling path of 'bdc_probe()'
Date: Wed, 18 Aug 2021 21:32:49 +0200	[thread overview]
Message-ID: <f8a4a6897deb0c8cb2e576580790303550f15fcd.1629314734.git.christophe.jaillet@wanadoo.fr> (raw)
In-Reply-To: <0c5910979f39225d5d8fe68c9ab1c147c68ddee1.1629314734.git.christophe.jaillet@wanadoo.fr>

If an error occurs after a successful 'clk_prepare_enable()' call, it must
be undone by a corresponding 'clk_disable_unprepare()' call.
This call is already present in the remove function.

Add this call in the error handling path and reorder the code so that the
'clk_prepare_enable()' call happens later in the function.
The goal is to have as much managed resources functions as possible
before the 'clk_prepare_enable()' call in order to keep the error handling
path simple.

While at it, remove the now unneeded 'clk' variable.

Fixes: c87dca047849 ("usb: bdc: Add clock enable for new chips with a separate BDC clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
Review with care.
I don't like shuffling code like that because of possible side effect.
Moving the code related to this clk looks fine to me, but who knows...
---
 drivers/usb/gadget/udc/bdc/bdc_core.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 251db57e51fa..fa1a3908ec3b 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -488,27 +488,14 @@ static int bdc_probe(struct platform_device *pdev)
 	int irq;
 	u32 temp;
 	struct device *dev = &pdev->dev;
-	struct clk *clk;
 	int phy_num;
 
 	dev_dbg(dev, "%s()\n", __func__);
 
-	clk = devm_clk_get_optional(dev, "sw_usbd");
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(dev, "could not enable clock\n");
-		return ret;
-	}
-
 	bdc = devm_kzalloc(dev, sizeof(*bdc), GFP_KERNEL);
 	if (!bdc)
 		return -ENOMEM;
 
-	bdc->clk = clk;
-
 	bdc->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(bdc->regs))
 		return PTR_ERR(bdc->regs);
@@ -545,10 +532,20 @@ static int bdc_probe(struct platform_device *pdev)
 		}
 	}
 
+	bdc->clk = devm_clk_get_optional(dev, "sw_usbd");
+	if (IS_ERR(bdc->clk))
+		return PTR_ERR(bdc->clk);
+
+	ret = clk_prepare_enable(bdc->clk);
+	if (ret) {
+		dev_err(dev, "could not enable clock\n");
+		return ret;
+	}
+
 	ret = bdc_phy_init(bdc);
 	if (ret) {
 		dev_err(bdc->dev, "BDC phy init failure:%d\n", ret);
-		return ret;
+		goto disable_clk;
 	}
 
 	temp = bdc_readl(bdc->regs, BDC_BDCCAP1);
@@ -581,6 +578,8 @@ static int bdc_probe(struct platform_device *pdev)
 	bdc_hw_exit(bdc);
 phycleanup:
 	bdc_phy_exit(bdc);
+disable_clk:
+	clk_disable_unprepare(bdc->clk);
 	return ret;
 }
 
-- 
2.30.2


  reply	other threads:[~2021-08-18 19:32 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-18 19:32 [PATCH 1/2] usb: bdc: Fix an error handling path in 'bdc_probe()' when no suitable DMA config is available Christophe JAILLET
2021-08-18 19:32 ` Christophe JAILLET [this message]
2021-08-20 20:03   ` [PATCH 2/2] usb: bdc: Fix a resource leak in the error handling path of 'bdc_probe()' Florian Fainelli
2021-08-31 13:42     ` Alan Cooper
2021-08-20 20:01 ` [PATCH 1/2] usb: bdc: Fix an error handling path in 'bdc_probe()' when no suitable DMA config is available Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f8a4a6897deb0c8cb2e576580790303550f15fcd.1629314734.git.christophe.jaillet@wanadoo.fr \
    --to=christophe.jaillet@wanadoo.fr \
    --cc=alcooperx@gmail.com \
    --cc=balbi@kernel.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --subject='Re: [PATCH 2/2] usb: bdc: Fix a resource leak in the error handling path of '\''bdc_probe()'\''' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).