From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
vkuznets@redhat.com
Subject: [PATCH 33/43] KVM: VMX: Shadow VMCS pin controls
Date: Thu, 13 Jun 2019 19:03:19 +0200 [thread overview]
Message-ID: <1560445409-17363-34-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1560445409-17363-1-git-send-email-pbonzini@redhat.com>
From: Sean Christopherson <sean.j.christopherson@intel.com>
Prepare to shadow all major control fields on a per-VMCS basis, which
allows KVM to avoid costly VMWRITEs when switching between vmcs01 and
vmcs02.
Shadowing pin controls also allows a future patch to remove the per-VMCS
'hv_timer_armed' flag, as the shadow copy is a superset of said flag.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
arch/x86/kvm/vmx/nested.c | 3 ++-
arch/x86/kvm/vmx/vmx.c | 10 ++++------
arch/x86/kvm/vmx/vmx.h | 2 ++
3 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index f5612b475393..0179ac083dd1 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -285,6 +285,7 @@ static void vmx_switch_vmcs(struct kvm_vcpu *vcpu, struct loaded_vmcs *vmcs)
vm_entry_controls_reset_shadow(vmx);
vm_exit_controls_reset_shadow(vmx);
+ pin_controls_reset_shadow(vmx);
vmx_segment_cache_clear(vmx);
}
@@ -2026,7 +2027,7 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
} else {
exec_control &= ~PIN_BASED_POSTED_INTR;
}
- vmcs_write32(PIN_BASED_VM_EXEC_CONTROL, exec_control);
+ pin_controls_init(vmx, exec_control);
/*
* EXEC CONTROLS
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 91e43c03144d..6eb4063d98fc 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -3844,7 +3844,7 @@ static void vmx_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
- vmcs_write32(PIN_BASED_VM_EXEC_CONTROL, vmx_pin_based_exec_ctrl(vmx));
+ pin_controls_set(vmx, vmx_pin_based_exec_ctrl(vmx));
if (cpu_has_secondary_exec_ctrls()) {
if (kvm_vcpu_apicv_active(vcpu))
vmcs_set_bits(SECONDARY_VM_EXEC_CONTROL,
@@ -4042,7 +4042,7 @@ static void vmx_vcpu_setup(struct vcpu_vmx *vmx)
vmcs_write64(VMCS_LINK_POINTER, -1ull); /* 22.3.1.5 */
/* Control */
- vmcs_write32(PIN_BASED_VM_EXEC_CONTROL, vmx_pin_based_exec_ctrl(vmx));
+ pin_controls_init(vmx, vmx_pin_based_exec_ctrl(vmx));
vmx->hv_deadline_tsc = -1;
vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, vmx_exec_control(vmx));
@@ -6366,8 +6366,7 @@ static void vmx_arm_hv_timer(struct vcpu_vmx *vmx, u32 val)
{
vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, val);
if (!vmx->loaded_vmcs->hv_timer_armed)
- vmcs_set_bits(PIN_BASED_VM_EXEC_CONTROL,
- PIN_BASED_VMX_PREEMPTION_TIMER);
+ pin_controls_setbit(vmx, PIN_BASED_VMX_PREEMPTION_TIMER);
vmx->loaded_vmcs->hv_timer_armed = true;
}
@@ -6396,8 +6395,7 @@ static void vmx_update_hv_timer(struct kvm_vcpu *vcpu)
}
if (vmx->loaded_vmcs->hv_timer_armed)
- vmcs_clear_bits(PIN_BASED_VM_EXEC_CONTROL,
- PIN_BASED_VMX_PREEMPTION_TIMER);
+ pin_controls_clearbit(vmx, PIN_BASED_VMX_PREEMPTION_TIMER);
vmx->loaded_vmcs->hv_timer_armed = false;
}
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 0a1b37d69f13..3c0a8b01f1f0 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -88,6 +88,7 @@ struct pt_desc {
struct vmx_controls_shadow {
u32 vm_entry;
u32 vm_exit;
+ u32 pin;
};
/*
@@ -423,6 +424,7 @@ static inline u8 vmx_get_rvi(void)
}
BUILD_CONTROLS_SHADOW(vm_entry, VM_ENTRY_CONTROLS)
BUILD_CONTROLS_SHADOW(vm_exit, VM_EXIT_CONTROLS)
+BUILD_CONTROLS_SHADOW(pin, PIN_BASED_VM_EXEC_CONTROL)
static inline void vmx_segment_cache_clear(struct vcpu_vmx *vmx)
{
--
1.8.3.1
next prev parent reply other threads:[~2019-06-13 17:05 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-13 17:02 [PATCH 00/43] VMX optimizations Paolo Bonzini
2019-06-13 17:02 ` [PATCH 01/43] KVM: VMX: Fix handling of #MC that occurs during VM-Entry Paolo Bonzini
2019-06-13 17:24 ` Jim Mattson
2019-06-13 17:02 ` [PATCH 02/43] kvm: nVMX: small cleanup in handle_exception Paolo Bonzini
2019-06-13 17:02 ` [PATCH 03/43] KVM: VMX: Read cached VM-Exit reason to detect external interrupt Paolo Bonzini
2019-06-13 17:02 ` [PATCH 04/43] KVM: VMX: Store the host kernel's IDT base in a global variable Paolo Bonzini
2019-06-13 17:02 ` [PATCH 05/43] KVM: x86: Move kvm_{before,after}_interrupt() calls to vendor code Paolo Bonzini
2019-06-13 17:02 ` [PATCH 06/43] KVM: VMX: Handle NMIs, #MCs and async #PFs in common irqs-disabled fn Paolo Bonzini
2019-06-13 17:02 ` [PATCH 07/43] KVM: nVMX: Intercept VMWRITEs to read-only shadow VMCS fields Paolo Bonzini
2019-06-13 17:02 ` [PATCH 08/43] KVM: nVMX: Intercept VMWRITEs to GUEST_{CS,SS}_AR_BYTES Paolo Bonzini
2019-06-13 17:02 ` [PATCH 09/43] KVM: nVMX: Track vmcs12 offsets for shadowed VMCS fields Paolo Bonzini
2019-06-13 17:02 ` [PATCH 10/43] KVM: nVMX: Lift sync_vmcs12() out of prepare_vmcs12() Paolo Bonzini
2019-06-13 17:02 ` [PATCH 11/43] KVM: nVMX: Use descriptive names for VMCS sync functions and flags Paolo Bonzini
2019-06-13 17:02 ` [PATCH 12/43] KVM: nVMX: Add helpers to identify shadowed VMCS fields Paolo Bonzini
2019-06-14 16:10 ` Sean Christopherson
2019-06-13 17:02 ` [PATCH 13/43] KVM: nVMX: Sync rarely accessed guest fields only when needed Paolo Bonzini
2019-06-13 17:03 ` [PATCH 14/43] KVM: nVMX: Rename prepare_vmcs02_*_full to prepare_vmcs02_*_rare Paolo Bonzini
2019-06-13 17:03 ` [PATCH 15/43] KVM: VMX: Always signal #GP on WRMSR to MSR_IA32_CR_PAT with bad value Paolo Bonzini
2019-06-13 17:03 ` [PATCH 16/43] KVM: nVMX: Always sync GUEST_BNDCFGS when it comes from vmcs01 Paolo Bonzini
[not found] ` <20190615221602.93C5721851@mail.kernel.org>
2019-06-15 22:40 ` Liran Alon
2019-06-13 17:03 ` [PATCH 17/43] KVM: nVMX: Write ENCLS-exiting bitmap once per vmcs02 Paolo Bonzini
2019-06-13 17:03 ` [PATCH 18/43] KVM: nVMX: Don't rewrite GUEST_PML_INDEX during nested VM-Entry Paolo Bonzini
2019-06-13 17:03 ` [PATCH 19/43] KVM: VMX: simplify vmx_prepare_switch_to_{guest,host} Paolo Bonzini
2019-06-13 17:03 ` [PATCH 20/43] KVM: nVMX: Don't "put" vCPU or host state when switching VMCS Paolo Bonzini
2019-06-13 17:03 ` [PATCH 21/43] KVM: nVMX: Don't reread VMCS-agnostic " Paolo Bonzini
2019-06-14 16:25 ` Sean Christopherson
2019-06-13 17:03 ` [PATCH 22/43] KVM: nVMX: Don't dump VMCS if virtual APIC page can't be mapped Paolo Bonzini
2019-06-17 19:17 ` Radim Krčmář
2019-06-17 20:07 ` Sean Christopherson
2019-06-18 9:43 ` Paolo Bonzini
2019-06-13 17:03 ` [PATCH 23/43] KVM: nVMX: Don't speculatively write virtual-APIC page address Paolo Bonzini
2019-06-13 17:03 ` [PATCH 24/43] KVM: nVMX: Don't speculatively write APIC-access " Paolo Bonzini
2019-06-13 17:03 ` [PATCH 25/43] KVM: nVMX: Update vmcs12 for MSR_IA32_CR_PAT when it's written Paolo Bonzini
2019-06-13 17:03 ` [PATCH 26/43] KVM: nVMX: Update vmcs12 for SYSENTER MSRs when they're written Paolo Bonzini
2019-06-13 17:03 ` [PATCH 27/43] KVM: nVMX: Update vmcs12 for MSR_IA32_DEBUGCTLMSR when it's written Paolo Bonzini
2019-06-13 17:03 ` [PATCH 28/43] KVM: nVMX: Don't update GUEST_BNDCFGS if it's clean in HV eVMCS Paolo Bonzini
2019-06-13 17:03 ` [PATCH 29/43] KVM: x86: introduce is_pae_paging Paolo Bonzini
2019-06-13 17:03 ` [PATCH 30/43] KVM: nVMX: Copy PDPTRs to/from vmcs12 only when necessary Paolo Bonzini
2019-06-13 17:03 ` [PATCH 31/43] KVM: nVMX: Use adjusted pin controls for vmcs02 Paolo Bonzini
2019-06-13 17:03 ` [PATCH 32/43] KVM: VMX: Add builder macros for shadowing controls Paolo Bonzini
2019-06-13 17:03 ` Paolo Bonzini [this message]
2019-06-13 17:03 ` [PATCH 34/43] KVM: VMX: Shadow VMCS primary execution controls Paolo Bonzini
2019-06-13 17:03 ` [PATCH 35/43] KVM: VMX: Shadow VMCS secondary " Paolo Bonzini
2019-06-13 17:03 ` [PATCH 36/43] KVM: nVMX: Shadow VMCS controls on a per-VMCS basis Paolo Bonzini
2019-06-13 17:03 ` [PATCH 37/43] KVM: nVMX: Don't reset VMCS controls shadow on VMCS switch Paolo Bonzini
2019-06-13 17:03 ` [PATCH 38/43] KVM: VMX: Explicitly initialize controls shadow at VMCS allocation Paolo Bonzini
2019-06-13 17:03 ` [PATCH 39/43] KVM: nVMX: Preserve last USE_MSR_BITMAPS when preparing vmcs02 Paolo Bonzini
2019-06-13 17:03 ` [PATCH 40/43] KVM: nVMX: Preset *DT exiting in vmcs02 when emulating UMIP Paolo Bonzini
2019-06-13 17:03 ` [PATCH 41/43] KVM: VMX: Drop hv_timer_armed from 'struct loaded_vmcs' Paolo Bonzini
2019-06-13 17:03 ` [PATCH 42/43] KVM: VMX: Leave preemption timer running when it's disabled Paolo Bonzini
2019-06-14 16:34 ` Sean Christopherson
2019-06-13 17:03 ` [PATCH 43/43] KVM: nVMX: shadow pin based execution controls Paolo Bonzini
2019-06-14 16:34 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1560445409-17363-34-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sean.j.christopherson@intel.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).