kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, "Andy Lutomirski" <luto@kernel.org>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>,
	kvm@vger.kernel.org, "Jason A. Donenfeld" <Jason@zx2c4.com>,
	"Rik van Riel" <riel@surriel.com>,
	"Dave Hansen" <dave.hansen@linux.intel.com>,
	"Sebastian Andrzej Siewior" <bigeasy@linutronix.de>
Subject: [PATCH 27/29] x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory
Date: Wed, 28 Nov 2018 23:20:33 +0100	[thread overview]
Message-ID: <20181128222035.2996-28-bigeasy@linutronix.de> (raw)
In-Reply-To: <20181128222035.2996-1-bigeasy@linutronix.de>

The !32bit+fxsr case loads the new state from user memory. In case we
restore the FPU state on return to userland we can't do this. It would
be required to disable preemption in order to avoid a context switch
which would set TIF_NEED_FPU_LOAD. If this happens before the "restore"
operation then the loaded registers would become volatile.

Disabling preemption while accessing user memory requires to disable the
pagefault handler. An error during XRSTOR would then mean that either a
page fault occured (and we have to retry with enabled page fault
handler) or a #GP occured because the xstate is bogus (after all the
sig-handler can modify it).

In order to avoid that mess, copy the FPU state from userland, validate
it and then load it. The copy_users_…() helper are basically the old
helper except that they operate on kernel memory and the fault handler
just sets the error value and the caller handles it.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/x86/include/asm/fpu/internal.h | 32 ++++++++++-----
 arch/x86/kernel/fpu/signal.c        | 62 +++++++++++++++++++++++------
 2 files changed, 71 insertions(+), 23 deletions(-)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 1e038b7357485..9fb2b8b811d22 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -118,6 +118,21 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
 	err;								\
 })
 
+#define kernel_insn_norestore(insn, output, input...)			\
+({									\
+	int err;							\
+	asm volatile("1:" #insn "\n\t"					\
+		     "2:\n"						\
+		     ".section .fixup,\"ax\"\n"				\
+		     "3:  movl $-1,%[err]\n"				\
+		     "    jmp  2b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 3b)				\
+		     : [err] "=r" (err), output				\
+		     : "0"(0), input);					\
+	err;								\
+})
+
 #define kernel_insn(insn, output, input...)				\
 	asm volatile("1:" #insn "\n\t"					\
 		     "2:\n"						\
@@ -138,15 +153,15 @@ static inline void copy_kernel_to_fxregs(struct fxregs_state *fx)
 	}
 }
 
-static inline int copy_user_to_fxregs(struct fxregs_state __user *fx)
+static inline int copy_users_to_fxregs(struct fxregs_state *fx)
 {
 	if (IS_ENABLED(CONFIG_X86_32))
-		return user_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
+		return kernel_insn_norestore(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 	else if (IS_ENABLED(CONFIG_AS_FXSAVEQ))
-		return user_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
+		return kernel_insn_norestore(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
 
 	/* See comment in copy_fxregs_to_kernel() below. */
-	return user_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx),
+	return kernel_insn_norestore(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx),
 			  "m" (*fx));
 }
 
@@ -155,9 +170,9 @@ static inline void copy_kernel_to_fregs(struct fregs_state *fx)
 	kernel_insn(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 }
 
-static inline int copy_user_to_fregs(struct fregs_state __user *fx)
+static inline int copy_users_to_fregs(struct fregs_state *fx)
 {
-	return user_insn(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
+	return kernel_insn_norestore(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 }
 
 static inline void copy_fxregs_to_kernel(struct fpu *fpu)
@@ -337,16 +352,13 @@ static inline void copy_kernel_to_xregs(struct xregs_state *xstate, u64 mask)
 /*
  * Restore xstate from user space xsave area.
  */
-static inline int copy_user_to_xregs(struct xregs_state __user *buf, u64 mask)
+static inline int copy_users_to_xregs(struct xregs_state *xstate, u64 mask)
 {
-	struct xregs_state *xstate = ((__force struct xregs_state *)buf);
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
 	int err;
 
-	stac();
 	XSTATE_OP(XRSTOR, xstate, lmask, hmask, err);
-	clac();
 
 	return err;
 }
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index c66356b168b39..339a8c113517e 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -217,7 +217,8 @@ sanitize_restored_xstate(union fpregs_state *state,
 		 */
 		xsave->i387.mxcsr &= mxcsr_feature_mask;
 
-		convert_to_fxsr(&state->fxsave, ia32_env);
+		if (ia32_env)
+			convert_to_fxsr(&state->fxsave, ia32_env);
 	}
 }
 
@@ -299,28 +300,63 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		kfree(tmp);
 		return err;
 	} else {
+		union fpregs_state *state;
+		void *tmp;
 		int ret;
 
+		tmp = kzalloc(sizeof(*state) + fpu_kernel_xstate_size + 64, GFP_KERNEL);
+		if (!tmp)
+			return -ENOMEM;
+		state = PTR_ALIGN(tmp, 64);
+
 		/*
 		 * For 64-bit frames and 32-bit fsave frames, restore the user
 		 * state to the registers directly (with exceptions handled).
 		 */
-		if (use_xsave()) {
-			if ((unsigned long)buf_fx % 64 || fx_only) {
+		if ((unsigned long)buf_fx % 64)
+			fx_only = 1;
+
+		if (use_xsave() && !fx_only) {
+			u64 init_bv = xfeatures_mask & ~xfeatures;
+
+			if (using_compacted_format()) {
+				ret = copy_user_to_xstate(&state->xsave, buf_fx);
+			} else {
+				ret = __copy_from_user(&state->xsave, buf_fx, state_size);
+
+				if (!ret && state_size > offsetof(struct xregs_state, header))
+					ret = validate_xstate_header(&state->xsave.header);
+			}
+			if (ret)
+				goto err_out;
+			sanitize_restored_xstate(state, NULL, xfeatures,
+						 fx_only);
+
+			if (unlikely(init_bv))
+				copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
+			ret = copy_users_to_xregs(&state->xsave, xfeatures);
+
+		} else if (use_fxsr()) {
+			ret = __copy_from_user(&state->fxsave, buf_fx, state_size);
+			if (ret)
+				goto err_out;
+
+			if (use_xsave()) {
 				u64 init_bv = xfeatures_mask & ~XFEATURE_MASK_FPSSE;
 				copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-				ret = copy_user_to_fxregs(buf_fx);
-			} else {
-				u64 init_bv = xfeatures_mask & ~xfeatures;
-				if (unlikely(init_bv))
-					copy_kernel_to_xregs(&init_fpstate.xsave, init_bv);
-				ret = copy_user_to_xregs(buf_fx, xfeatures);
 			}
-		} else if (use_fxsr()) {
-			ret = copy_user_to_fxregs(buf_fx);
-		} else
-			ret = copy_user_to_fregs(buf_fx);
+			state->fxsave.mxcsr &= mxcsr_feature_mask;
 
+			ret = copy_users_to_fxregs(&state->fxsave);
+		} else {
+			ret = __copy_from_user(&state->fsave, buf_fx, state_size);
+			if (ret)
+				goto err_out;
+			ret = copy_users_to_fregs(buf_fx);
+		}
+
+err_out:
+		kfree(tmp);
 		if (ret) {
 			fpu__clear(fpu);
 			return -1;
-- 
2.20.0.rc1

  parent reply	other threads:[~2018-11-28 22:20 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-28 22:20 [PATCH v5] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 01/29] x86/fpu: Use ULL for shift in xfeature_uncompacted_offset() Sebastian Andrzej Siewior
2018-11-29  1:52   ` Rik van Riel
2018-12-03 21:00   ` [tip:x86/fpu] x86/fpu: Use unsigned long long " tip-bot for Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 02/29] x86/entry/32: Remove asm/math_emu.h include Sebastian Andrzej Siewior
2018-11-29  1:52   ` Rik van Riel
2018-12-03 21:01   ` [tip:x86/fpu] x86/process/32: " tip-bot for Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 03/29] x86/entry: Remove _TIF_ALLWORK_MASK Sebastian Andrzej Siewior
2018-11-29  1:53   ` Rik van Riel
2018-12-03 21:02   ` [tip:x86/fpu] x86/thread_info: " tip-bot for Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 04/29] x86/pkeys: Make init_pkru_value static Sebastian Andrzej Siewior
2018-11-29  1:53   ` Rik van Riel
2018-12-03 21:02   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 05/29] x86/fpu: add might_fault() to user_insn() Sebastian Andrzej Siewior
2018-11-29  1:54   ` Rik van Riel
2018-12-03 21:03   ` [tip:x86/fpu] x86/fpu: Add " tip-bot for Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 06/29] x86/fpu: Update comment for __raw_xsave_addr() Sebastian Andrzej Siewior
2018-11-29  1:56   ` Rik van Riel
2018-12-03 21:03   ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 07/29] x86/fpu: don't export __kernel_fpu_{begin|end}() Sebastian Andrzej Siewior
2018-11-29  2:00   ` Rik van Riel
2018-11-29 15:02     ` [PATCH 07/29 v2] " Sebastian Andrzej Siewior
2018-12-03 21:04       ` [tip:x86/fpu] x86/fpu: Don't export __kernel_fpu_{begin,end}() tip-bot for Sebastian Andrzej Siewior
2018-12-03 21:12         ` Ard Biesheuvel
2018-12-03 22:08           ` Borislav Petkov
2018-12-04 11:39             ` Borislav Petkov
2018-12-04 12:15             ` Sebastian Andrzej Siewior
2018-12-04 12:33               ` Borislav Petkov
2018-12-04 11:45       ` tip-bot for Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 08/29] x86/fpu: Remove fpu->initialized usage in __fpu__restore_sig() Sebastian Andrzej Siewior
2018-12-06 20:07   ` Borislav Petkov
2018-12-07  8:17     ` Sebastian Andrzej Siewior
2018-12-07 10:19       ` Borislav Petkov
2018-11-28 22:20 ` [PATCH 09/29] x86/fpu: Remove fpu__restore() Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 10/29] x86/fpu: Remove preempt_disable() in fpu__clear() Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 11/29] x86/fpu: Always init the `state' " Sebastian Andrzej Siewior
2018-12-12 17:11   ` Borislav Petkov
2018-12-13 14:35     ` Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 12/29] x86/fpu: Remove fpu->initialized usage in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 13/29] x86/fpu: Don't save fxregs for ia32 frames " Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 14/29] x86/fpu: Remove fpu->initialized Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 15/29] x86/fpu: Remove user_fpu_begin() Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 16/29] x86/fpu: Add (__)make_fpregs_active helpers Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 17/29] x86/fpu: Make __raw_xsave_addr() use feature number instead of mask Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 18/29] x86/fpu: Make get_xsave_field_ptr() and get_xsave_addr() " Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 19/29] x86/fpu: Only write PKRU if it is different from current Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 20/29] x86/pkeys: Don't check if PKRU is zero before writting it Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 21/29] x86/fpu: Eager switch PKRU state Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 22/29] x86/entry: Add TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 23/29] x86/fpu: Always store the registers in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 24/29] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 25/29] x86/fpu: Update xstate's PKRU value on write_pkru() Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 26/29] x86/fpu: Inline copy_user_to_fpregs_zeroing() Sebastian Andrzej Siewior
2018-11-28 23:09   ` Joey Pabalinas
2018-11-28 22:20 ` Sebastian Andrzej Siewior [this message]
2018-11-28 22:20 ` [PATCH 28/29] x86/fpu: Merge the two code paths in __fpu__restore_sig() Sebastian Andrzej Siewior
2018-11-28 22:20 ` [PATCH 29/29] x86/fpu: Defer FPU state load until return to userspace Sebastian Andrzej Siewior
2018-11-29 15:00   ` Sebastian Andrzej Siewior
2018-12-10 14:41   ` Sebastian Andrzej Siewior
2018-11-30 11:52 ` [PATCH v5] x86: load FPU registers on return to userland Sebastian Andrzej Siewior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181128222035.2996-28-bigeasy@linutronix.de \
    --to=bigeasy@linutronix.de \
    --cc=Jason@zx2c4.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=riel@surriel.com \
    --cc=rkrcmar@redhat.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).