From: "Suthikulpanit, Suravee" <Suravee.Suthikulpanit@amd.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kvm@vger.kernel.org" <kvm@vger.kernel.org>
Cc: "joro@8bytes.org" <joro@8bytes.org>,
"pbonzini@redhat.com" <pbonzini@redhat.com>,
"rkrcmar@redhat.com" <rkrcmar@redhat.com>,
"Suthikulpanit, Suravee" <Suravee.Suthikulpanit@amd.com>
Subject: [PATCH 6/6] svm: Temporary deactivate AVIC during ExtINT handling
Date: Fri, 22 Mar 2019 11:57:40 +0000 [thread overview]
Message-ID: <20190322115702.10166-7-suravee.suthikulpanit@amd.com> (raw)
In-Reply-To: <20190322115702.10166-1-suravee.suthikulpanit@amd.com>
AMD AVIC does not support ExtINT. Therefore, AVIC must be temporary
deactivated and fall back to using legacy interrupt injection via
vINTR and interrupt window.
Introduce svm_request_activate/deactivate_avic() helper functions,
which handle steps required to activate/deactivate AVIC.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/x86/kvm/svm.c | 57 +++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 54 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index f41f34f70dde..84116e689d5f 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -391,6 +391,8 @@ static u8 rsm_ins_bytes[] = "\x0f\xaa";
static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
static void svm_flush_tlb(struct kvm_vcpu *vcpu, bool invalidate_gpa);
static void svm_complete_interrupts(struct vcpu_svm *svm);
+static void svm_request_activate_avic(struct kvm_vcpu *vcpu);
+static bool svm_get_enable_apicv(struct kvm_vcpu *vcpu);
static int nested_svm_exit_handled(struct vcpu_svm *svm);
static int nested_svm_intercept(struct vcpu_svm *svm);
@@ -2109,6 +2111,9 @@ static void avic_set_running(struct kvm_vcpu *vcpu, bool is_run)
{
struct vcpu_svm *svm = to_svm(vcpu);
+ if (!kvm_vcpu_apicv_active(vcpu))
+ return;
+
svm->avic_is_running = is_run;
if (is_run)
avic_vcpu_load(vcpu, vcpu->cpu);
@@ -2356,6 +2361,10 @@ static void svm_vcpu_blocking(struct kvm_vcpu *vcpu)
static void svm_vcpu_unblocking(struct kvm_vcpu *vcpu)
{
+ if (kvm_check_request(KVM_REQ_APICV_ACTIVATE, vcpu))
+ kvm_vcpu_activate_apicv(vcpu);
+ if (kvm_check_request(KVM_REQ_APICV_DEACTIVATE, vcpu))
+ kvm_vcpu_deactivate_apicv(vcpu);
avic_set_running(vcpu, true);
}
@@ -4505,6 +4514,15 @@ static int interrupt_window_interception(struct vcpu_svm *svm)
{
kvm_make_request(KVM_REQ_EVENT, &svm->vcpu);
svm_clear_vintr(svm);
+
+ /*
+ * For AVIC, the only reason to end up here is ExtINTs.
+ * In this case AVIC was temporarily disabled for
+ * requesting the IRQ window and we have to re-enable it.
+ */
+ if (svm_get_enable_apicv(&svm->vcpu))
+ svm_request_activate_avic(&svm->vcpu);
+
svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
mark_dirty(svm->vmcb, VMCB_INTR);
++svm->vcpu.stat.irq_window_exits;
@@ -5206,6 +5224,34 @@ static void svm_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr)
{
}
+static bool is_avic_active(struct vcpu_svm *svm)
+{
+ return (svm_get_enable_apicv(&svm->vcpu) &&
+ svm->vmcb->control.int_ctl & AVIC_ENABLE_MASK);
+}
+
+static void svm_request_activate_avic(struct kvm_vcpu *vcpu)
+{
+ struct vcpu_svm *svm = to_svm(vcpu);
+
+ if (!lapic_in_kernel(vcpu) || is_avic_active(svm))
+ return;
+
+ avic_setup_access_page(vcpu, false);
+ kvm_make_apicv_activate_request(vcpu->kvm);
+}
+
+static void svm_request_deactivate_avic(struct kvm_vcpu *vcpu)
+{
+ struct vcpu_svm *svm = to_svm(vcpu);
+
+ if (!lapic_in_kernel(vcpu) || !is_avic_active(svm))
+ return;
+
+ avic_destroy_access_page(vcpu);
+ kvm_make_apicv_deactivate_request(vcpu->kvm);
+}
+
/* Note: Currently only used by Hyper-V. */
static void svm_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
{
@@ -5493,9 +5539,6 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
- if (kvm_vcpu_apicv_active(vcpu))
- return;
-
/*
* In case GIF=0 we can't rely on the CPU to tell us when GIF becomes
* 1, because that's a separate STGI/VMRUN intercept. The next time we
@@ -5505,6 +5548,14 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
* window under the assumption that the hardware will set the GIF.
*/
if ((vgif_enabled(svm) || gif_set(svm)) && nested_svm_intr(svm)) {
+ /*
+ * IRQ window is not needed when AVIC is enabled,
+ * unless we have pending ExtINT since it cannot be injected
+ * via AVIC. In such case, we need to temporarily disable AVIC,
+ * and fallback to injecting IRQ via V_IRQ.
+ */
+ if (kvm_vcpu_apicv_active(vcpu))
+ svm_request_deactivate_avic(&svm->vcpu);
svm_set_vintr(svm);
svm_inject_irq(svm, 0x0);
}
--
2.17.1
next prev parent reply other threads:[~2019-03-22 11:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-22 11:57 [PATCH 0/6] KVM/x86: Add workaround to support ExtINT with AVIC Suthikulpanit, Suravee
2019-03-22 11:57 ` [PATCH 1/6] KVM: x86: Add callback functions for handling APIC ID, DFR and LDR update Suthikulpanit, Suravee
2019-07-03 21:16 ` Paolo Bonzini
2019-07-17 19:44 ` Suthikulpanit, Suravee
2019-03-22 11:57 ` [PATCH 2/6] svm: Add AMD AVIC handlers for " Suthikulpanit, Suravee
2019-03-22 11:57 ` [PATCH 3/6] svm: Add support for APIC_ACCESS_PAGE_PRIVATE_MEMSLOT setup/destroy Suthikulpanit, Suravee
2019-05-08 19:14 ` Jan H. Schönherr
2019-06-30 16:19 ` Suthikulpanit, Suravee
2019-03-22 11:57 ` [PATCH 4/6] kvm: lapic: Add apicv activate/deactivate helper function Suthikulpanit, Suravee
2019-05-08 22:27 ` Jan H. Schönherr
2019-07-15 22:35 ` Suthikulpanit, Suravee
2019-03-22 11:57 ` [PATCH 5/6] KVM: x86: Add interface for run-time activate/de-activate APIC virtualization Suthikulpanit, Suravee
2019-05-08 20:45 ` Jan H. Schönherr
2019-03-22 11:57 ` Suthikulpanit, Suravee [this message]
2019-05-08 17:37 ` [PATCH 6/6] svm: Temporary deactivate AVIC during ExtINT handling Jan H. Schönherr
2019-06-03 18:58 ` Suthikulpanit, Suravee
2019-04-04 21:30 ` [PATCH 0/6] KVM/x86: Add workaround to support ExtINT with AVIC rkrcmar
2019-04-04 22:06 ` rkrcmar
2019-04-04 22:06 ` rkrcmar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190322115702.10166-7-suravee.suthikulpanit@amd.com \
--to=suravee.suthikulpanit@amd.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).