KVM Archive on lore.kernel.org
 help / color / Atom feed
From: Vivek Goyal <vgoyal@redhat.com>
To: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, linux-nvdimm@lists.01.org
Cc: vgoyal@redhat.com, miklos@szeredi.hu, stefanha@redhat.com,
	dgilbert@redhat.com, swhiteho@redhat.com
Subject: [PATCH v2 16/30] virtio: Implement get_shm_region for MMIO transport
Date: Wed, 15 May 2019 15:27:01 -0400
Message-ID: <20190515192715.18000-17-vgoyal@redhat.com> (raw)
In-Reply-To: <20190515192715.18000-1-vgoyal@redhat.com>

From: Sebastien Boeuf <sebastien.boeuf@intel.com>

On MMIO a new set of registers is defined for finding SHM
regions.  Add their definitions and use them to find the region.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
---
 drivers/virtio/virtio_mmio.c     | 32 ++++++++++++++++++++++++++++++++
 include/uapi/linux/virtio_mmio.h | 11 +++++++++++
 2 files changed, 43 insertions(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index d9dd0f789279..ac42520abd86 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -499,6 +499,37 @@ static const char *vm_bus_name(struct virtio_device *vdev)
 	return vm_dev->pdev->name;
 }
 
+static bool vm_get_shm_region(struct virtio_device *vdev,
+			      struct virtio_shm_region *region, u8 id)
+{
+	struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+	u64 len, addr;
+
+	/* Select the region we're interested in */
+	writel(id, vm_dev->base + VIRTIO_MMIO_SHM_SEL);
+
+	/* Read the region size */
+	len = (u64) readl(vm_dev->base + VIRTIO_MMIO_SHM_LEN_LOW);
+	len |= (u64) readl(vm_dev->base + VIRTIO_MMIO_SHM_LEN_HIGH) << 32;
+
+	region->len = len;
+
+	/* Check if region length is -1. If that's the case, the shared memory
+	 * region does not exist and there is no need to proceed further.
+	 */
+	if (len == ~(u64)0) {
+		return false;
+	}
+
+	/* Read the region base address */
+	addr = (u64) readl(vm_dev->base + VIRTIO_MMIO_SHM_BASE_LOW);
+	addr |= (u64) readl(vm_dev->base + VIRTIO_MMIO_SHM_BASE_HIGH) << 32;
+
+	region->addr = addr;
+
+	return true;
+}
+
 static const struct virtio_config_ops virtio_mmio_config_ops = {
 	.get		= vm_get,
 	.set		= vm_set,
@@ -511,6 +542,7 @@ static const struct virtio_config_ops virtio_mmio_config_ops = {
 	.get_features	= vm_get_features,
 	.finalize_features = vm_finalize_features,
 	.bus_name	= vm_bus_name,
+	.get_shm_region = vm_get_shm_region,
 };
 
 
diff --git a/include/uapi/linux/virtio_mmio.h b/include/uapi/linux/virtio_mmio.h
index c4b09689ab64..0650f91bea6c 100644
--- a/include/uapi/linux/virtio_mmio.h
+++ b/include/uapi/linux/virtio_mmio.h
@@ -122,6 +122,17 @@
 #define VIRTIO_MMIO_QUEUE_USED_LOW	0x0a0
 #define VIRTIO_MMIO_QUEUE_USED_HIGH	0x0a4
 
+/* Shared memory region id */
+#define VIRTIO_MMIO_SHM_SEL             0x0ac
+
+/* Shared memory region length, 64 bits in two halves */
+#define VIRTIO_MMIO_SHM_LEN_LOW         0x0b0
+#define VIRTIO_MMIO_SHM_LEN_HIGH        0x0b4
+
+/* Shared memory region base address, 64 bits in two halves */
+#define VIRTIO_MMIO_SHM_BASE_LOW        0x0b8
+#define VIRTIO_MMIO_SHM_BASE_HIGH       0x0bc
+
 /* Configuration atomicity value */
 #define VIRTIO_MMIO_CONFIG_GENERATION	0x0fc
 
-- 
2.20.1


  parent reply index

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15 19:26 [PATCH v2 00/30] [RFC] virtio-fs: shared file system for virtual machines Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 01/30] fuse: delete dentry if timeout is zero Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 02/30] fuse: Clear setuid bit even in cache=never path Vivek Goyal
2019-05-20 14:41   ` Miklos Szeredi
2019-05-20 14:44     ` Miklos Szeredi
2019-05-20 20:25       ` Nikolaus Rath
2019-05-21 15:01     ` Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 03/30] fuse: Use default_file_splice_read for direct IO Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 04/30] fuse: export fuse_end_request() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 05/30] fuse: export fuse_len_args() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 06/30] fuse: Export fuse_send_init_request() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 07/30] fuse: export fuse_get_unique() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 08/30] fuse: extract fuse_fill_super_common() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 09/30] fuse: add fuse_iqueue_ops callbacks Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 10/30] fuse: Separate fuse device allocation and installation in fuse_conn Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 11/30] virtio_fs: add skeleton virtio_fs.ko module Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 12/30] dax: remove block device dependencies Vivek Goyal
2019-05-16  0:21   ` Dan Williams
2019-05-16 10:07     ` Stefan Hajnoczi
2019-05-16 14:23     ` Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 13/30] dax: Pass dax_dev to dax_writeback_mapping_range() Vivek Goyal
2019-05-15 19:26 ` [PATCH v2 14/30] virtio: Add get_shm_region method Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 15/30] virtio: Implement get_shm_region for PCI transport Vivek Goyal
2019-05-15 19:27 ` Vivek Goyal [this message]
2019-05-15 19:27 ` [PATCH v2 17/30] fuse, dax: add fuse_conn->dax_dev field Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 18/30] virtio_fs, dax: Set up virtio_fs dax_device Vivek Goyal
2019-07-17 17:27   ` Halil Pasic
2019-07-18  9:04     ` Cornelia Huck
2019-07-18 11:20       ` Halil Pasic
2019-07-18 14:47         ` Cornelia Huck
2019-07-18 13:15     ` Vivek Goyal
2019-07-18 14:30       ` Dan Williams
2019-07-22 10:51         ` Christian Borntraeger
2019-07-22 10:56           ` Dr. David Alan Gilbert
2019-07-22 11:20             ` Christian Borntraeger
2019-07-22 11:43               ` Cornelia Huck
2019-07-22 12:00                 ` Christian Borntraeger
2019-07-22 12:08                   ` David Hildenbrand
2019-07-29 13:20                     ` Stefan Hajnoczi
2019-05-15 19:27 ` [PATCH v2 19/30] fuse: Keep a list of free dax memory ranges Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 20/30] fuse: Introduce setupmapping/removemapping commands Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 21/30] fuse, dax: Implement dax read/write operations Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 22/30] fuse, dax: add DAX mmap support Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 23/30] fuse: Define dax address space operations Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 24/30] fuse, dax: Take ->i_mmap_sem lock during dax page fault Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 25/30] fuse: Maintain a list of busy elements Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 26/30] fuse: Add logic to free up a memory range Vivek Goyal
     [not found]   ` <CAN+Pk99SNKSf+GjSQUUWt_eu1fSjTy_ByUOEQUXHi8zNqXY1zA@mail.gmail.com>
2019-05-20 12:53     ` Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 27/30] fuse: Release file in process context Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 28/30] fuse: Reschedule dax free work if too many EAGAIN attempts Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 29/30] fuse: Take inode lock for dax inode truncation Vivek Goyal
2019-05-15 19:27 ` [PATCH v2 30/30] virtio-fs: Do not provide abort interface in fusectl Vivek Goyal

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190515192715.18000-17-vgoyal@redhat.com \
    --to=vgoyal@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=miklos@szeredi.hu \
    --cc=stefanha@redhat.com \
    --cc=swhiteho@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvm/0 kvm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvm kvm/ https://lore.kernel.org/kvm \
		kvm@vger.kernel.org
	public-inbox-index kvm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.kvm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git