kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
	joro@8bytes.org, alex.williamson@redhat.com,
	jacob.jun.pan@linux.intel.com, yi.l.liu@intel.com,
	jean-philippe.brucker@arm.com, will.deacon@arm.com,
	robin.murphy@arm.com
Cc: kevin.tian@intel.com, ashok.raj@intel.com, marc.zyngier@arm.com,
	peter.maydell@linaro.org, vincent.stehle@arm.com,
	zhangfei.gao@gmail.com
Subject: [PATCH v9 01/14] iommu: Introduce attach/detach_pasid_table API
Date: Thu, 11 Jul 2019 13:49:46 +0200	[thread overview]
Message-ID: <20190711114959.15675-2-eric.auger@redhat.com> (raw)
In-Reply-To: <20190711114959.15675-1-eric.auger@redhat.com>

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

In virtualization use case, when a guest is assigned
a PCI host device, protected by a virtual IOMMU on the guest,
the physical IOMMU must be programmed to be consistent with
the guest mappings. If the physical IOMMU supports two
translation stages it makes sense to program guest mappings
onto the first stage/level (ARM/Intel terminology) while the host
owns the stage/level 2.

In that case, it is mandated to trap on guest configuration
settings and pass those to the physical iommu driver.

This patch adds a new API to the iommu subsystem that allows
to set/unset the pasid table information.

A generic iommu_pasid_table_config struct is introduced in
a new iommu.h uapi header. This is going to be used by the VFIO
user API.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
---
 drivers/iommu/iommu.c      | 19 ++++++++++++++
 include/linux/iommu.h      | 18 ++++++++++++++
 include/uapi/linux/iommu.h | 51 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 88 insertions(+)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 0c674d80c37f..dac05f75671c 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -1610,6 +1610,25 @@ int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
 }
 EXPORT_SYMBOL_GPL(iommu_attach_device);
 
+int iommu_attach_pasid_table(struct iommu_domain *domain,
+			     struct iommu_pasid_table_config *cfg)
+{
+	if (unlikely(!domain->ops->attach_pasid_table))
+		return -ENODEV;
+
+	return domain->ops->attach_pasid_table(domain, cfg);
+}
+EXPORT_SYMBOL_GPL(iommu_attach_pasid_table);
+
+void iommu_detach_pasid_table(struct iommu_domain *domain)
+{
+	if (unlikely(!domain->ops->detach_pasid_table))
+		return;
+
+	domain->ops->detach_pasid_table(domain);
+}
+EXPORT_SYMBOL_GPL(iommu_detach_pasid_table);
+
 static void __iommu_detach_device(struct iommu_domain *domain,
 				  struct device *dev)
 {
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index fdc355ccc570..0a51d4060121 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -228,6 +228,8 @@ struct iommu_sva_ops {
  * @sva_unbind: Unbind process address space from device
  * @sva_get_pasid: Get PASID associated to a SVA handle
  * @page_response: handle page request response
+ * @attach_pasid_table: attach a pasid table
+ * @detach_pasid_table: detach the pasid table
  * @pgsize_bitmap: bitmap of all possible supported page sizes
  */
 struct iommu_ops {
@@ -287,6 +289,9 @@ struct iommu_ops {
 				      void *drvdata);
 	void (*sva_unbind)(struct iommu_sva *handle);
 	int (*sva_get_pasid)(struct iommu_sva *handle);
+	int (*attach_pasid_table)(struct iommu_domain *domain,
+				  struct iommu_pasid_table_config *cfg);
+	void (*detach_pasid_table)(struct iommu_domain *domain);
 
 	int (*page_response)(struct device *dev,
 			     struct iommu_fault_event *evt,
@@ -395,6 +400,9 @@ extern int iommu_attach_device(struct iommu_domain *domain,
 			       struct device *dev);
 extern void iommu_detach_device(struct iommu_domain *domain,
 				struct device *dev);
+extern int iommu_attach_pasid_table(struct iommu_domain *domain,
+				    struct iommu_pasid_table_config *cfg);
+extern void iommu_detach_pasid_table(struct iommu_domain *domain);
 extern struct iommu_domain *iommu_get_domain_for_dev(struct device *dev);
 extern struct iommu_domain *iommu_get_dma_domain(struct device *dev);
 extern int iommu_map(struct iommu_domain *domain, unsigned long iova,
@@ -916,6 +924,13 @@ iommu_aux_get_pasid(struct iommu_domain *domain, struct device *dev)
 	return -ENODEV;
 }
 
+static inline
+int iommu_attach_pasid_table(struct iommu_domain *domain,
+			     struct iommu_pasid_table_config *cfg)
+{
+	return -ENODEV;
+}
+
 static inline struct iommu_sva *
 iommu_sva_bind_device(struct device *dev, struct mm_struct *mm, void *drvdata)
 {
@@ -937,6 +952,9 @@ static inline int iommu_sva_get_pasid(struct iommu_sva *handle)
 	return IOMMU_PASID_INVALID;
 }
 
+static inline
+void iommu_detach_pasid_table(struct iommu_domain *domain) {}
+
 #endif /* CONFIG_IOMMU_API */
 
 #ifdef CONFIG_IOMMU_DEBUGFS
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
index fc00c5d4741b..0f9d24904f4b 100644
--- a/include/uapi/linux/iommu.h
+++ b/include/uapi/linux/iommu.h
@@ -152,4 +152,55 @@ struct iommu_page_response {
 	__u32	code;
 };
 
+/**
+ * struct iommu_pasid_smmuv3 - ARM SMMUv3 Stream Table Entry stage 1 related
+ *     information
+ * @version: API version of this structure
+ * @s1fmt: STE s1fmt (format of the CD table: single CD, linear table
+ *         or 2-level table)
+ * @s1dss: STE s1dss (specifies the behavior when @pasid_bits != 0
+ *         and no PASID is passed along with the incoming transaction)
+ * @padding: reserved for future use (should be zero)
+ *
+ * The PASID table is referred to as the Context Descriptor (CD) table on ARM
+ * SMMUv3. Please refer to the ARM SMMU 3.x spec (ARM IHI 0070A) for full
+ * details.
+ */
+struct iommu_pasid_smmuv3 {
+#define PASID_TABLE_SMMUV3_CFG_VERSION_1 1
+	__u32	version;
+	__u8	s1fmt;
+	__u8	s1dss;
+	__u8	padding[2];
+};
+
+/**
+ * struct iommu_pasid_table_config - PASID table data used to bind guest PASID
+ *     table to the host IOMMU
+ * @version: API version to prepare for future extensions
+ * @format: format of the PASID table
+ * @base_ptr: guest physical address of the PASID table
+ * @pasid_bits: number of PASID bits used in the PASID table
+ * @config: indicates whether the guest translation stage must
+ *          be translated, bypassed or aborted.
+ * @padding: reserved for future use (should be zero)
+ * @smmuv3: table information when @format is %IOMMU_PASID_FORMAT_SMMUV3
+ */
+struct iommu_pasid_table_config {
+#define PASID_TABLE_CFG_VERSION_1 1
+	__u32	version;
+#define IOMMU_PASID_FORMAT_SMMUV3	1
+	__u32	format;
+	__u64	base_ptr;
+	__u8	pasid_bits;
+#define IOMMU_PASID_CONFIG_TRANSLATE	1
+#define IOMMU_PASID_CONFIG_BYPASS	2
+#define IOMMU_PASID_CONFIG_ABORT	3
+	__u8	config;
+	__u8    padding[6];
+	union {
+		struct iommu_pasid_smmuv3 smmuv3;
+	};
+};
+
 #endif /* _UAPI_IOMMU_H */
-- 
2.20.1


  reply	other threads:[~2019-07-11 11:50 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-11 11:49 [PATCH v9 00/14] SMMUv3 Nested Stage Setup (IOMMU part) Eric Auger
2019-07-11 11:49 ` Eric Auger [this message]
2019-07-11 11:49 ` [PATCH v9 02/14] iommu: Introduce cache_invalidate API Eric Auger
2019-07-11 11:49 ` [PATCH v9 03/14] iommu: Introduce bind/unbind_guest_msi Eric Auger
2019-07-11 11:49 ` [PATCH v9 04/14] iommu/arm-smmu-v3: Maintain a SID->device structure Eric Auger
2019-07-11 11:49 ` [PATCH v9 05/14] iommu/smmuv3: Dynamically allocate s1_cfg and s2_cfg Eric Auger
2019-07-11 11:49 ` [PATCH v9 06/14] iommu/smmuv3: Get prepared for nested stage support Eric Auger
2019-07-11 11:49 ` [PATCH v9 07/14] iommu/smmuv3: Implement attach/detach_pasid_table Eric Auger
2019-07-11 11:49 ` [PATCH v9 08/14] iommu/smmuv3: Introduce __arm_smmu_tlb_inv_asid/s1_range_nosync Eric Auger
2019-07-11 11:49 ` [PATCH v9 09/14] iommu/smmuv3: Implement cache_invalidate Eric Auger
2019-07-11 11:49 ` [PATCH v9 10/14] dma-iommu: Implement NESTED_MSI cookie Eric Auger
2019-07-11 11:49 ` [PATCH v9 11/14] iommu/smmuv3: Nested mode single MSI doorbell per domain enforcement Eric Auger
2019-07-11 11:49 ` [PATCH v9 12/14] iommu/smmuv3: Enforce incompatibility between nested mode and HW MSI regions Eric Auger
2019-07-11 11:49 ` [PATCH v9 13/14] iommu/smmuv3: Implement bind/unbind_guest_msi Eric Auger
2019-07-11 11:49 ` [PATCH v9 14/14] iommu/smmuv3: Report non recoverable faults Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190711114959.15675-2-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe.brucker@arm.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=peter.maydell@linaro.org \
    --cc=robin.murphy@arm.com \
    --cc=vincent.stehle@arm.com \
    --cc=will.deacon@arm.com \
    --cc=yi.l.liu@intel.com \
    --cc=zhangfei.gao@gmail.com \
    --subject='Re: [PATCH v9 01/14] iommu: Introduce attach/detach_pasid_table API' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).