From: Peter Xu <peterx@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: Nitesh Narayan Lal <nitesh@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <sean.j.christopherson@intel.com>,
peterx@redhat.com, Vitaly Kuznetsov <vkuznets@redhat.com>
Subject: [PATCH v3 5/5] KVM: X86: Fix callers of kvm_apic_match_dest() to use correct macros
Date: Mon, 2 Dec 2019 15:13:14 -0500 [thread overview]
Message-ID: <20191202201314.543-6-peterx@redhat.com> (raw)
In-Reply-To: <20191202201314.543-1-peterx@redhat.com>
Callers of kvm_apic_match_dest() should always pass in APIC_DEST_*
macros for either dest_mode and short_hand parameters. Fix up all the
callers of kvm_apic_match_dest() that are not following the rule.
Reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
arch/x86/kvm/ioapic.c | 11 +++++++----
arch/x86/kvm/irq_comm.c | 3 ++-
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index 901d85237d1c..1082ca8d11e5 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -108,8 +108,9 @@ static void __rtc_irq_eoi_tracking_restore_one(struct kvm_vcpu *vcpu)
union kvm_ioapic_redirect_entry *e;
e = &ioapic->redirtbl[RTC_GSI];
- if (!kvm_apic_match_dest(vcpu, NULL, 0, e->fields.dest_id,
- e->fields.dest_mode))
+ if (!kvm_apic_match_dest(vcpu, NULL, APIC_DEST_NOSHORT,
+ e->fields.dest_id,
+ kvm_lapic_irq_dest_mode(e->fields.dest_mode)))
return;
new_val = kvm_apic_pending_eoi(vcpu, e->fields.vector);
@@ -237,6 +238,7 @@ void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu, ulong *ioapic_handled_vectors)
struct dest_map *dest_map = &ioapic->rtc_status.dest_map;
union kvm_ioapic_redirect_entry *e;
int index;
+ u16 dm;
spin_lock(&ioapic->lock);
@@ -250,8 +252,9 @@ void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu, ulong *ioapic_handled_vectors)
if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG ||
kvm_irq_has_notifier(ioapic->kvm, KVM_IRQCHIP_IOAPIC, index) ||
index == RTC_GSI) {
- if (kvm_apic_match_dest(vcpu, NULL, 0,
- e->fields.dest_id, e->fields.dest_mode) ||
+ dm = kvm_lapic_irq_dest_mode(e->fields.dest_mode);
+ if (kvm_apic_match_dest(vcpu, NULL, APIC_DEST_NOSHORT,
+ e->fields.dest_id, dm) ||
kvm_apic_pending_eoi(vcpu, e->fields.vector))
__set_bit(e->fields.vector,
ioapic_handled_vectors);
diff --git a/arch/x86/kvm/irq_comm.c b/arch/x86/kvm/irq_comm.c
index 5f59e5ebdbed..e89c2160b39f 100644
--- a/arch/x86/kvm/irq_comm.c
+++ b/arch/x86/kvm/irq_comm.c
@@ -417,7 +417,8 @@ void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu,
kvm_set_msi_irq(vcpu->kvm, entry, &irq);
- if (irq.level && kvm_apic_match_dest(vcpu, NULL, 0,
+ if (irq.level &&
+ kvm_apic_match_dest(vcpu, NULL, APIC_DEST_NOSHORT,
irq.dest_id, irq.dest_mode))
__set_bit(irq.vector, ioapic_handled_vectors);
}
--
2.21.0
next prev parent reply other threads:[~2019-12-02 20:13 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-02 20:13 [PATCH v3 0/5] KVM: X86: Cleanups on dest_mode and headers Peter Xu
2019-12-02 20:13 ` [PATCH v3 1/5] KVM: X86: Fix kvm_bitmap_or_dest_vcpus() to use irq shorthand Peter Xu
2019-12-03 9:25 ` Vitaly Kuznetsov
2019-12-02 20:13 ` [PATCH v3 2/5] KVM: X86: Move irrelevant declarations out of ioapic.h Peter Xu
2019-12-03 9:36 ` Vitaly Kuznetsov
2019-12-02 20:13 ` [PATCH v3 3/5] KVM: X86: Use APIC_DEST_* macros properly in kvm_lapic_irq.dest_mode Peter Xu
2019-12-03 13:16 ` Vitaly Kuznetsov
2019-12-03 16:16 ` Peter Xu
2019-12-02 20:13 ` [PATCH v3 4/5] KVM: X86: Drop KVM_APIC_SHORT_MASK and KVM_APIC_DEST_MASK Peter Xu
2019-12-03 13:19 ` Vitaly Kuznetsov
2019-12-03 16:21 ` Peter Xu
2019-12-02 20:13 ` Peter Xu [this message]
2019-12-03 13:23 ` [PATCH v3 5/5] KVM: X86: Fix callers of kvm_apic_match_dest() to use correct macros Vitaly Kuznetsov
2019-12-03 16:27 ` Peter Xu
2019-12-03 16:32 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191202201314.543-6-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nitesh@redhat.com \
--cc=pbonzini@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).