KVM Archive on lore.kernel.org
 help / color / Atom feed
From: Andrew Murray <andrew.murray@arm.com>
To: Marc Zyngier <marc.zyngier@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org, Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v2 00/18] arm64: KVM: add SPE profiling support
Date: Fri, 20 Dec 2019 14:30:07 +0000
Message-ID: <20191220143025.33853-1-andrew.murray@arm.com> (raw)

This series implements support for allowing KVM guests to use the Arm
Statistical Profiling Extension (SPE).

It has been tested on a model to ensure that both host and guest can
simultaneously use SPE with valid data. E.g.

$ perf record -e arm_spe/ts_enable=1,pa_enable=1,pct_enable=1/ \
        dd if=/dev/zero of=/dev/null count=1000
$ perf report --dump-raw-trace > spe_buf.txt

As we save and restore the SPE context, the guest can access the SPE
registers directly, thus in this version of the series we remove the
trapping and emulation.

In the previous series of this support, when KVM SPE isn't supported
(e.g. via CONFIG_KVM_ARM_SPE) we were able to return a value of 0 to
all reads of the SPE registers - as we can no longer do this there isn't
a mechanism to prevent the guest from using SPE - thus I'm keen for
feedback on the best way of resolving this.

It appears necessary to pin the entire guest memory in order to provide
guest SPE access - otherwise it is possible for the guest to receive
Stage-2 faults.

The last two extra patches are for the kvmtool if someone wants to play
with it.

Changes since v2:
	- Rebased on v5.5-rc2
	- Renamed kvm_spe structure 'irq' member to 'irq_num'
	- Added irq_level to kvm_spe structure
	- Clear PMBSR service bit on save to avoid spurious interrupts
	- Update kvmtool headers to 5.4
	- Enabled SPE in KVM init features
	- No longer trap and emulate
	- Add support for guest/host exclusion flags
	- Fix virq support for SPE
	- Adjusted sysreg_elx_s macros with merged clang build support

Andrew Murray (4):
  KVM: arm64: don't trap Statistical Profiling controls to EL2
  perf: arm_spe: Add KVM structure for obtaining IRQ info
  KVM: arm64: spe: Provide guest virtual interrupts for SPE
  perf: arm_spe: Handle guest/host exclusion flags

Sudeep Holla (12):
  dt-bindings: ARM SPE: highlight the need for PPI partitions on
    heterogeneous systems
  arm64: KVM: reset E2PB correctly in MDCR_EL2 when exiting the
    guest(VHE)
  arm64: KVM: define SPE data structure for each vcpu
  arm64: KVM: add SPE system registers to sys_reg_descs
  arm64: KVM/VHE: enable the use PMSCR_EL12 on VHE systems
  arm64: KVM: split debug save restore across vm/traps activation
  arm64: KVM/debug: drop pmscr_el1 and use sys_regs[PMSCR_EL1] in
    kvm_cpu_context
  arm64: KVM: add support to save/restore SPE profiling buffer controls
  arm64: KVM: enable conditional save/restore full SPE profiling buffer
    controls
  arm64: KVM/debug: use EL1&0 stage 1 translation regime
  KVM: arm64: add a new vcpu device control group for SPEv1
  KVM: arm64: enable SPE support
  KVMTOOL: update_headers: Sync kvm UAPI headers with linux v5.5-rc2
  KVMTOOL: kvm: add a vcpu feature for SPEv1 support

 .../devicetree/bindings/arm/spe-pmu.txt       |   5 +-
 Documentation/virt/kvm/devices/vcpu.txt       |  28 +++
 arch/arm64/include/asm/kvm_host.h             |  18 +-
 arch/arm64/include/asm/kvm_hyp.h              |   6 +-
 arch/arm64/include/asm/sysreg.h               |   1 +
 arch/arm64/include/uapi/asm/kvm.h             |   4 +
 arch/arm64/kvm/Kconfig                        |   7 +
 arch/arm64/kvm/Makefile                       |   1 +
 arch/arm64/kvm/debug.c                        |   2 -
 arch/arm64/kvm/guest.c                        |   6 +
 arch/arm64/kvm/hyp/debug-sr.c                 | 105 +++++---
 arch/arm64/kvm/hyp/switch.c                   |  18 +-
 arch/arm64/kvm/reset.c                        |   3 +
 arch/arm64/kvm/sys_regs.c                     |  11 +
 drivers/perf/arm_spe_pmu.c                    |  26 ++
 include/kvm/arm_spe.h                         |  82 ++++++
 include/uapi/linux/kvm.h                      |   1 +
 virt/kvm/arm/arm.c                            |  10 +-
 virt/kvm/arm/spe.c                            | 234 ++++++++++++++++++
 19 files changed, 521 insertions(+), 47 deletions(-)
 create mode 100644 include/kvm/arm_spe.h
 create mode 100644 virt/kvm/arm/spe.c

-- 
2.21.0


             reply index

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-20 14:30 Andrew Murray [this message]
2019-12-20 14:30 ` [PATCH v2 01/18] dt-bindings: ARM SPE: highlight the need for PPI partitions on heterogeneous systems Andrew Murray
2019-12-20 14:30 ` [PATCH v2 02/18] arm64: KVM: reset E2PB correctly in MDCR_EL2 when exiting the guest(VHE) Andrew Murray
2019-12-21 13:12   ` Marc Zyngier
2019-12-24 10:29     ` Andrew Murray
2020-01-02 16:21       ` Andrew Murray
2019-12-20 14:30 ` [PATCH v2 03/18] arm64: KVM: define SPE data structure for each vcpu Andrew Murray
2019-12-21 13:19   ` Marc Zyngier
2019-12-24 12:01     ` Andrew Murray
2019-12-20 14:30 ` [PATCH v2 04/18] arm64: KVM: add SPE system registers to sys_reg_descs Andrew Murray
2019-12-20 14:30 ` [PATCH v2 05/18] arm64: KVM/VHE: enable the use PMSCR_EL12 on VHE systems Andrew Murray
2019-12-20 14:30 ` [PATCH v2 06/18] arm64: KVM: split debug save restore across vm/traps activation Andrew Murray
2019-12-20 14:30 ` [PATCH v2 07/18] arm64: KVM/debug: drop pmscr_el1 and use sys_regs[PMSCR_EL1] in kvm_cpu_context Andrew Murray
2019-12-20 14:30 ` [PATCH v2 08/18] arm64: KVM: add support to save/restore SPE profiling buffer controls Andrew Murray
2019-12-21 13:57   ` Marc Zyngier
2019-12-24 10:49     ` Andrew Murray
2019-12-24 15:17       ` Andrew Murray
2019-12-24 15:48         ` Marc Zyngier
2019-12-20 14:30 ` [PATCH v2 09/18] arm64: KVM: enable conditional save/restore full " Andrew Murray
2019-12-20 18:06   ` Mark Rutland
2019-12-24 12:15     ` Andrew Murray
2019-12-21 14:13   ` Marc Zyngier
2020-01-07 15:13     ` Andrew Murray
2020-01-08 11:17       ` Marc Zyngier
2020-01-08 11:58         ` Will Deacon
2020-01-08 12:36           ` Marc Zyngier
2020-01-08 13:10             ` Will Deacon
2020-01-09 11:23               ` Andrew Murray
2020-01-09 11:25                 ` Andrew Murray
2020-01-09 12:01                   ` Will Deacon
2020-01-10 10:54     ` Andrew Murray
2020-01-10 11:04       ` Andrew Murray
2020-01-10 11:51         ` Marc Zyngier
2020-01-10 12:12           ` Andrew Murray
2020-01-10 11:18       ` Marc Zyngier
2020-01-10 12:12         ` Andrew Murray
2020-01-10 13:34           ` Marc Zyngier
2019-12-20 14:30 ` [PATCH v2 10/18] arm64: KVM/debug: use EL1&0 stage 1 translation regime Andrew Murray
2019-12-22 10:34   ` Marc Zyngier
2019-12-24 11:11     ` Andrew Murray
2020-01-13 16:31     ` Andrew Murray
2020-01-15 14:03       ` Marc Zyngier
2019-12-20 14:30 ` [PATCH v2 11/18] KVM: arm64: don't trap Statistical Profiling controls to EL2 Andrew Murray
2019-12-20 18:08   ` Mark Rutland
2019-12-22 10:42   ` Marc Zyngier
2019-12-23 11:56     ` Andrew Murray
2019-12-23 12:05       ` Marc Zyngier
2019-12-23 12:10         ` Andrew Murray
2020-01-09 17:25           ` Andrew Murray
2020-01-09 17:42             ` Mark Rutland
2020-01-09 17:46               ` Andrew Murray
2019-12-20 14:30 ` [PATCH v2 12/18] KVM: arm64: add a new vcpu device control group for SPEv1 Andrew Murray
2019-12-22 11:03   ` Marc Zyngier
2019-12-24 12:30     ` Andrew Murray
2019-12-20 14:30 ` [PATCH v2 13/18] perf: arm_spe: Add KVM structure for obtaining IRQ info Andrew Murray
2019-12-22 11:24   ` Marc Zyngier
2019-12-24 12:35     ` Andrew Murray
2019-12-20 14:30 ` [PATCH v2 14/18] KVM: arm64: spe: Provide guest virtual interrupts for SPE Andrew Murray
2019-12-22 12:07   ` Marc Zyngier
2019-12-24 11:50     ` Andrew Murray
2019-12-24 12:42       ` Marc Zyngier
2019-12-24 13:08         ` Andrew Murray
2019-12-24 13:22           ` Marc Zyngier
2019-12-24 13:36             ` Andrew Murray
2019-12-24 13:46               ` Marc Zyngier
2019-12-20 14:30 ` [PATCH v2 15/18] perf: arm_spe: Handle guest/host exclusion flags Andrew Murray
2019-12-20 18:10   ` Mark Rutland
2019-12-22 12:10   ` Marc Zyngier
2019-12-23 12:10     ` Andrew Murray
2019-12-23 12:18       ` Marc Zyngier
2019-12-20 14:30 ` [PATCH v2 16/18] KVM: arm64: enable SPE support Andrew Murray
2019-12-20 14:30 ` [PATCH v2 17/18, KVMTOOL] update_headers: Sync kvm UAPI headers with linux v5.5-rc2 Andrew Murray
2019-12-20 14:30 ` [PATCH v2 18/18, KVMTOOL] kvm: add a vcpu feature for SPEv1 support Andrew Murray
2019-12-20 17:55 ` [PATCH v2 00/18] arm64: KVM: add SPE profiling support Mark Rutland
2019-12-24 12:54   ` Andrew Murray
2019-12-21 10:48 ` Marc Zyngier
2019-12-22 12:22   ` Marc Zyngier
2019-12-24 12:56     ` Andrew Murray

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191220143025.33853-1-andrew.murray@arm.com \
    --to=andrew.murray@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=sudeep.holla@arm.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvm/0 kvm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvm kvm/ https://lore.kernel.org/kvm \
		kvm@vger.kernel.org
	public-inbox-index kvm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.kvm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git