KVM Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Xu <peterx@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	Christophe de Dinechin <dinechin@redhat.com>,
	Jason Wang <jasowang@redhat.com>,
	Kevin Tian <kevin.tian@intel.com>,
	peterx@redhat.com,
	Sean Christopherson <sean.j.christopherson@intel.com>,
	Yan Zhao <yan.y.zhao@intel.com>
Subject: [PATCH v9 07/14] KVM: Don't allocate dirty bitmap if dirty ring is enabled
Date: Sat, 23 May 2020 18:56:52 -0400
Message-ID: <20200523225659.1027044-8-peterx@redhat.com> (raw)
In-Reply-To: <20200523225659.1027044-1-peterx@redhat.com>

Because kvm dirty rings and kvm dirty log is used in an exclusive way,
Let's avoid creating the dirty_bitmap when kvm dirty ring is enabled.
At the meantime, since the dirty_bitmap will be conditionally created
now, we can't use it as a sign of "whether this memory slot enabled
dirty tracking".  Change users like that to check against the kvm
memory slot flags.

Note that there still can be chances where the kvm memory slot got its
dirty_bitmap allocated, _if_ the memory slots are created before
enabling of the dirty rings and at the same time with the dirty
tracking capability enabled, they'll still with the dirty_bitmap.
However it should not hurt much (e.g., the bitmaps will always be
freed if they are there), and the real users normally won't trigger
this because dirty bit tracking flag should in most cases only be
applied to kvm slots only before migration starts, that should be far
latter than kvm initializes (VM starts).

Signed-off-by: Peter Xu <peterx@redhat.com>
---
 arch/x86/kvm/mmu/mmu.c   | 4 ++--
 include/linux/kvm_host.h | 5 +++++
 virt/kvm/kvm_main.c      | 4 ++--
 3 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 94d84a383b80..ebc86f661db3 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -1276,8 +1276,8 @@ gfn_to_memslot_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t gfn,
 	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
 	if (!slot || slot->flags & KVM_MEMSLOT_INVALID)
 		return NULL;
-	if (no_dirty_log && slot->dirty_bitmap)
-		return NULL;
+	if (no_dirty_log && kvm_slot_dirty_track_enabled(slot))
+		return false;
 
 	return slot;
 }
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index a7eaef494f45..5081c6e2ae06 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -351,6 +351,11 @@ struct kvm_memory_slot {
 	u16 as_id;
 };
 
+static inline bool kvm_slot_dirty_track_enabled(struct kvm_memory_slot *slot)
+{
+	return slot->flags & KVM_MEM_LOG_DIRTY_PAGES;
+}
+
 static inline unsigned long kvm_dirty_bitmap_bytes(struct kvm_memory_slot *memslot)
 {
 	return ALIGN(memslot->npages, BITS_PER_LONG) / 8;
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 9639cf8d8c9c..ae7ba67eab63 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1294,7 +1294,7 @@ int __kvm_set_memory_region(struct kvm *kvm,
 	/* Allocate/free page dirty bitmap as needed */
 	if (!(new.flags & KVM_MEM_LOG_DIRTY_PAGES))
 		new.dirty_bitmap = NULL;
-	else if (!new.dirty_bitmap) {
+	else if (!new.dirty_bitmap && !kvm->dirty_ring_size) {
 		r = kvm_alloc_dirty_bitmap(&new);
 		if (r)
 			return r;
@@ -2581,7 +2581,7 @@ static void mark_page_dirty_in_slot(struct kvm *kvm,
 				    struct kvm_memory_slot *memslot,
 				    gfn_t gfn)
 {
-	if (memslot && memslot->dirty_bitmap) {
+	if (memslot && kvm_slot_dirty_track_enabled(memslot)) {
 		unsigned long rel_gfn = gfn - memslot->base_gfn;
 		u32 slot = (memslot->as_id << 16) | memslot->id;
 
-- 
2.26.2


  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-23 22:56 [PATCH v9 00/14] KVM: Dirty ring interface Peter Xu
2020-05-23 22:56 ` [PATCH v9 01/14] KVM: X86: Change parameter for fast_page_fault tracepoint Peter Xu
2020-05-23 22:56 ` [PATCH v9 02/14] KVM: Cache as_id in kvm_memory_slot Peter Xu
2020-05-23 22:56 ` [PATCH v9 03/14] KVM: X86: Don't track dirty for KVM_SET_[TSS_ADDR|IDENTITY_MAP_ADDR] Peter Xu
2020-05-23 22:56 ` [PATCH v9 04/14] KVM: Pass in kvm pointer into mark_page_dirty_in_slot() Peter Xu
2020-05-23 22:56 ` [PATCH v9 05/14] KVM: X86: Implement ring-based dirty memory tracking Peter Xu
2020-05-25  2:48   ` kbuild test robot
2020-05-25 15:26     ` Peter Xu
     [not found]   ` <202005252245.ZeOB8qNJ%lkp@intel.com>
2020-05-25 15:33     ` Peter Xu
2020-05-23 22:56 ` [PATCH v9 06/14] KVM: Make dirty ring exclusive to dirty bitmap log Peter Xu
2020-05-23 22:56 ` Peter Xu [this message]
2020-05-26 15:05   ` [PATCH v9 07/14] KVM: Don't allocate dirty bitmap if dirty ring is enabled kbuild test robot
2020-05-26 15:21     ` Peter Xu
2020-05-23 22:56 ` [PATCH v9 08/14] KVM: selftests: Always clear dirty bitmap after iteration Peter Xu
2020-05-23 22:56 ` [PATCH v9 09/14] KVM: selftests: Sync uapi/linux/kvm.h to tools/ Peter Xu
2020-05-23 22:56 ` [PATCH v9 10/14] KVM: selftests: Use a single binary for dirty/clear log test Peter Xu
2020-05-23 22:56 ` [PATCH v9 11/14] KVM: selftests: Introduce after_vcpu_run hook for dirty " Peter Xu
2020-05-23 22:56 ` [PATCH v9 12/14] KVM: selftests: Add dirty ring buffer test Peter Xu
2020-05-23 23:06 ` [PATCH v9 13/14] KVM: selftests: Let dirty_log_test async for dirty ring test Peter Xu
2020-05-23 23:06 ` [PATCH v9 14/14] KVM: selftests: Add "-c" parameter to dirty log test Peter Xu
2020-05-23 23:14 ` [PATCH v9 00/14] KVM: Dirty ring interface Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200523225659.1027044-8-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=dinechin@redhat.com \
    --cc=jasowang@redhat.com \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=vkuznets@redhat.com \
    --cc=yan.y.zhao@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvm/0 kvm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvm kvm/ https://lore.kernel.org/kvm \
		kvm@vger.kernel.org
	public-inbox-index kvm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.kvm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git