KVM Archive on lore.kernel.org
 help / color / Atom feed
From: David Woodhouse <dwmw2@infradead.org>
To: x86@kernel.org
Cc: kvm <kvm@vger.kernel.org>, Thomas Gleixner <tglx@linutronix.de>,
	Paolo Bonzini <pbonzini@redhat.com>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linux-hyperv@vger.kernel.org
Subject: [PATCH v2 1/8] x86/apic: Fix x2apic enablement without interrupt remapping
Date: Fri,  9 Oct 2020 11:46:09 +0100
Message-ID: <20201009104616.1314746-2-dwmw2@infradead.org> (raw)
In-Reply-To: <20201009104616.1314746-1-dwmw2@infradead.org>

From: David Woodhouse <dwmw@amazon.co.uk>

Currently, Linux as a hypervisor guest will enable x2apic only if there
are no CPUs present at boot time with an APIC ID above 255.

Hotplugging a CPU later with a higher APIC ID would result in a CPU
which cannot be targeted by external interrupts.

Add a filter in x2apic_apic_id_valid() which can be used to prevent
such CPUs from coming online, and allow x2apic to be enabled even if
they are present at boot time.

Fixes: ce69a784504 ("x86/apic: Enable x2APIC without interrupt remapping under KVM")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/include/asm/apic.h        |  1 +
 arch/x86/kernel/apic/apic.c        | 14 ++++++++------
 arch/x86/kernel/apic/x2apic_phys.c |  9 +++++++++
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 1c129abb7f09..b0fd204e0023 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -259,6 +259,7 @@ static inline u64 native_x2apic_icr_read(void)
 
 extern int x2apic_mode;
 extern int x2apic_phys;
+extern void __init x2apic_set_max_apicid(u32 apicid);
 extern void __init check_x2apic(void);
 extern void x2apic_setup(void);
 static inline int x2apic_enabled(void)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index b3eef1d5c903..113f6ca7b828 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1841,20 +1841,22 @@ static __init void try_to_enable_x2apic(int remap_mode)
 		return;
 
 	if (remap_mode != IRQ_REMAP_X2APIC_MODE) {
-		/* IR is required if there is APIC ID > 255 even when running
-		 * under KVM
+		/*
+		 * Using X2APIC without IR is not architecturally supported
+		 * on bare metal but may be supported in guests.
 		 */
-		if (max_physical_apicid > 255 ||
-		    !x86_init.hyper.x2apic_available()) {
+		if (!x86_init.hyper.x2apic_available()) {
 			pr_info("x2apic: IRQ remapping doesn't support X2APIC mode\n");
 			x2apic_disable();
 			return;
 		}
 
 		/*
-		 * without IR all CPUs can be addressed by IOAPIC/MSI
-		 * only in physical mode
+		 * Without IR, all CPUs can be addressed by IOAPIC/MSI only
+		 * in physical mode, and CPUs with an APIC ID that cannnot
+		 * be addressed must not be brought online.
 		 */
+		x2apic_set_max_apicid(255);
 		x2apic_phys = 1;
 	}
 	x2apic_enable();
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index bc9693841353..e14eae6d6ea7 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -8,6 +8,12 @@
 int x2apic_phys;
 
 static struct apic apic_x2apic_phys;
+static u32 x2apic_max_apicid __ro_after_init;
+
+void __init x2apic_set_max_apicid(u32 apicid)
+{
+	x2apic_max_apicid = apicid;
+}
 
 static int __init set_x2apic_phys_mode(char *arg)
 {
@@ -98,6 +104,9 @@ static int x2apic_phys_probe(void)
 /* Common x2apic functions, also used by x2apic_cluster */
 int x2apic_apic_id_valid(u32 apicid)
 {
+	if (x2apic_max_apicid && apicid > x2apic_max_apicid)
+		return 0;
+
 	return 1;
 }
 
-- 
2.26.2


  reply index

Thread overview: 113+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-07 12:20 [PATCH 0/5] Fix x2apic enablement and allow up to 32768 CPUs without IR where supported David Woodhouse
2020-10-07 12:20 ` [PATCH 1/5] x86/apic: Fix x2apic enablement without interrupt remapping David Woodhouse
2020-10-07 12:20   ` [PATCH 2/5] x86/msi: Only use high bits of MSI address for DMAR unit David Woodhouse
2020-10-07 12:20   ` [PATCH 3/5] x86/ioapic: Handle Extended Destination ID field in RTE David Woodhouse
2020-10-08  9:12     ` Peter Zijlstra
2020-10-08 17:05       ` David Woodhouse
2020-10-08 11:41     ` Thomas Gleixner
2020-10-07 12:20   ` [PATCH 4/5] x86/apic: Support 15 bits of APIC ID in IOAPIC/MSI where available David Woodhouse
2020-10-08 11:54     ` Thomas Gleixner
2020-10-08 12:02       ` Thomas Gleixner
2020-10-08 13:00       ` David Woodhouse
2020-10-07 12:20   ` [PATCH 5/5] x86/kvm: Add KVM_FEATURE_MSI_EXT_DEST_ID David Woodhouse
2020-10-08 12:05     ` Thomas Gleixner
2020-10-08 12:55       ` David Woodhouse
2020-10-08 16:08         ` David Woodhouse
2020-10-08 21:14           ` Thomas Gleixner
2020-10-08 21:39             ` David Woodhouse
2020-10-08 23:27               ` Thomas Gleixner
2020-10-09  6:07                 ` David Woodhouse
2020-10-10 10:06                 ` David Woodhouse
2020-10-10 11:44                   ` Thomas Gleixner
2020-10-10 11:58                     ` David Woodhouse
2020-10-11 17:12                       ` Thomas Gleixner
2020-10-11 21:15                         ` David Woodhouse
2020-10-12  9:33                           ` Thomas Gleixner
2020-10-12 16:06                             ` David Woodhouse
2020-10-12 18:38                               ` Thomas Gleixner
2020-10-12 20:20                                 ` David Woodhouse
2020-10-12 22:13                                   ` Thomas Gleixner
2020-10-13  7:52                                     ` David Woodhouse
2020-10-13  8:11                                       ` [PATCH 0/9] Remove irq_remapping_get_irq_domain() David Woodhouse
2020-10-13  8:11                                         ` [PATCH 1/9] genirq/irqdomain: Implement get_name() method on irqchip fwnodes David Woodhouse
2020-10-13  8:11                                         ` [PATCH 2/9] x86/apic: Add select() method on vector irqdomain David Woodhouse
2020-10-13  8:11                                         ` [PATCH 3/9] iommu/amd: Implement select() method on remapping irqdomain David Woodhouse
2020-10-13  8:11                                         ` [PATCH 4/9] iommu/vt-d: " David Woodhouse
2020-10-13  8:11                                         ` [PATCH 5/9] iommu/hyper-v: " David Woodhouse
2020-10-13  8:11                                         ` [PATCH 6/9] x86/hpet: Use irq_find_matching_fwspec() to find " David Woodhouse
2020-10-13  8:11                                         ` [PATCH 7/9] x86/ioapic: " David Woodhouse
2020-10-13  8:11                                         ` [PATCH 8/9] x86: Kill all traces of irq_remapping_get_irq_domain() David Woodhouse
2020-10-13  8:11                                         ` [PATCH 9/9] iommu/vt-d: Simplify intel_irq_remapping_select() David Woodhouse
2020-10-13  9:28                                       ` [PATCH 5/5] x86/kvm: Add KVM_FEATURE_MSI_EXT_DEST_ID Thomas Gleixner
2020-10-13 10:15                                         ` David Woodhouse
2020-10-13 10:46                                         ` Thomas Gleixner
2020-10-13 10:53                                           ` David Woodhouse
2020-10-13 11:51                                             ` David Woodhouse
2020-10-13 12:40                                               ` Thomas Gleixner
2020-10-08 11:46   ` [PATCH 1/5] x86/apic: Fix x2apic enablement without interrupt remapping Thomas Gleixner
2020-10-09 10:46 ` [PATCH v2 0/8] Fix x2apic enablement and allow up to 32768 CPUs without IR where supported David Woodhouse
2020-10-09 10:46   ` David Woodhouse [this message]
2020-10-09 10:46   ` [PATCH v2 2/8] x86/msi: Only use high bits of MSI address for DMAR unit David Woodhouse
2020-10-09 10:46   ` [PATCH v2 3/8] x86/apic: Always provide irq_compose_msi_msg() method for vector domain David Woodhouse
2020-10-09 10:46   ` [PATCH v2 4/8] x86/ioapic: Handle Extended Destination ID field in RTE David Woodhouse
2020-10-09 10:46   ` [PATCH v2 5/8] x86/apic: Support 15 bits of APIC ID in MSI where available David Woodhouse
2020-10-09 10:46   ` [PATCH v2 6/8] x86/kvm: Add KVM_FEATURE_MSI_EXT_DEST_ID David Woodhouse
2020-10-09 10:46   ` [PATCH v2 7/8] x86/hpet: Move MSI support into hpet.c David Woodhouse
2020-10-09 10:46   ` [PATCH v2 8/8] x86/ioapic: Generate RTE directly from parent irqchip's MSI message David Woodhouse
2020-10-22 21:43     ` Thomas Gleixner
2020-10-22 22:10       ` Thomas Gleixner
2020-10-23 17:04         ` David Woodhouse
2020-10-23 10:10       ` David Woodhouse
2020-10-23 21:28         ` Thomas Gleixner
2020-10-24  8:26           ` David Woodhouse
2020-10-24  8:41             ` David Woodhouse
2020-10-24  9:13             ` Paolo Bonzini
2020-10-24 10:13               ` David Woodhouse
2020-10-24 12:44                 ` David Woodhouse
2020-10-24 21:35                   ` [PATCH v3 00/35] Fix x2apic enablement and allow more CPUs, clean up I/OAPIC and MSI bitfields David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 01/35] x86/apic: Fix x2apic enablement without interrupt remapping David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 02/35] x86/msi: Only use high bits of MSI address for DMAR unit David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 03/35] x86/apic/uv: Fix inconsistent destination mode David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 04/35] x86/devicetree: Fix the ioapic interrupt type table David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 05/35] x86/apic: Cleanup delivery mode defines David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 06/35] x86/apic: Replace pointless apic::dest_logical usage David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 07/35] x86/apic: Get rid of apic::dest_logical David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 08/35] x86/apic: Cleanup destination mode David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 09/35] x86/apic: Always provide irq_compose_msi_msg() method for vector domain David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 10/35] x86/hpet: Move MSI support into hpet.c David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 11/35] genirq/msi: Allow shadow declarations of msi_msg::$member David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 12/35] x86/msi: Provide msi message shadow structs David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 13/35] iommu/intel: Use msi_msg " David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 14/35] iommu/amd: " David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 15/35] PCI: vmd: " David Woodhouse
2020-10-28 20:49                       ` Kees Cook
2020-10-28 21:13                         ` Thomas Gleixner
2020-10-28 23:22                           ` Kees Cook
2020-10-24 21:35                     ` [PATCH v3 16/35] x86/kvm: " David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 17/35] x86/pci/xen: " David Woodhouse
2020-10-25  9:49                       ` David Laight
2020-10-25 10:26                         ` David Woodhouse
2020-10-25 13:20                           ` David Laight
2020-10-24 21:35                     ` [PATCH v3 18/35] x86/msi: Remove msidef.h David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 19/35] x86/io_apic: Cleanup trigger/polarity helpers David Woodhouse
2020-11-10  6:31                       ` Qian Cai
2020-11-10  8:59                         ` David Woodhouse
2020-11-10 16:26                           ` Paolo Bonzini
2020-10-24 21:35                     ` [PATCH v3 20/35] x86/ioapic: Cleanup IO/APIC route entry structs David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 21/35] x86/ioapic: Generate RTE directly from parent irqchip's MSI message David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 22/35] genirq/irqdomain: Implement get_name() method on irqchip fwnodes David Woodhouse
2020-10-25  9:41                       ` Marc Zyngier
2020-10-24 21:35                     ` [PATCH v3 23/35] x86/apic: Add select() method on vector irqdomain David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 24/35] iommu/amd: Implement select() method on remapping irqdomain David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 25/35] iommu/vt-d: " David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 26/35] iommu/hyper-v: " David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 27/35] x86/hpet: Use irq_find_matching_fwspec() to find " David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 28/35] x86/ioapic: " David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 29/35] x86: Kill all traces of irq_remapping_get_irq_domain() David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 30/35] iommu/vt-d: Simplify intel_irq_remapping_select() David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 31/35] x86/ioapic: Handle Extended Destination ID field in RTE David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 32/35] x86/apic: Support 15 bits of APIC ID in MSI where available David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 33/35] iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 34/35] x86/kvm: Reserve KVM_FEATURE_MSI_EXT_DEST_ID David Woodhouse
2020-10-24 21:35                     ` [PATCH v3 35/35] x86/kvm: Enable 15-bit extension when KVM_FEATURE_MSI_EXT_DEST_ID detected David Woodhouse
2020-10-25  8:12                     ` [PATCH v3 00/35] Fix x2apic enablement and allow more CPUs, clean up I/OAPIC and MSI bitfields David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201009104616.1314746-2-dwmw2@infradead.org \
    --to=dwmw2@infradead.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvm/0 kvm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvm kvm/ https://lore.kernel.org/kvm \
		kvm@vger.kernel.org
	public-inbox-index kvm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.kvm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git