From: Marcelo Tosatti <mtosatti@redhat.com>
To: Maxim Levitsky <mlevitsk@redhat.com>
Cc: kvm@vger.kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Jonathan Corbet <corbet@lwn.net>,
Jim Mattson <jmattson@google.com>,
Wanpeng Li <wanpengli@tencent.com>,
"open list:KERNEL SELFTEST FRAMEWORK"
<linux-kselftest@vger.kernel.org>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
Sean Christopherson <sean.j.christopherson@intel.com>,
open list <linux-kernel@vger.kernel.org>,
Ingo Molnar <mingo@redhat.com>,
"maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)"
<x86@kernel.org>, Joerg Roedel <joro@8bytes.org>,
Borislav Petkov <bp@alien8.de>, Shuah Khan <shuah@kernel.org>,
Andrew Jones <drjones@redhat.com>,
Oliver Upton <oupton@google.com>,
"open list:DOCUMENTATION" <linux-doc@vger.kernel.org>
Subject: Re: [PATCH v2 1/3] KVM: x86: implement KVM_{GET|SET}_TSC_STATE
Date: Mon, 7 Dec 2020 20:29:20 -0300 [thread overview]
Message-ID: <20201207232920.GD27492@fuller.cnet> (raw)
In-Reply-To: <20201203171118.372391-2-mlevitsk@redhat.com>
On Thu, Dec 03, 2020 at 07:11:16PM +0200, Maxim Levitsky wrote:
> These two new ioctls allow to more precisly capture and
> restore guest's TSC state.
>
> Both ioctls are meant to be used to accurately migrate guest TSC
> even when there is a significant downtime during the migration.
>
> Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
> ---
> Documentation/virt/kvm/api.rst | 65 ++++++++++++++++++++++++++++++
> arch/x86/kvm/x86.c | 73 ++++++++++++++++++++++++++++++++++
> include/uapi/linux/kvm.h | 15 +++++++
> 3 files changed, 153 insertions(+)
>
> diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> index 70254eaa5229f..ebecfe4b414ce 100644
> --- a/Documentation/virt/kvm/api.rst
> +++ b/Documentation/virt/kvm/api.rst
> @@ -4826,6 +4826,71 @@ If a vCPU is in running state while this ioctl is invoked, the vCPU may
> experience inconsistent filtering behavior on MSR accesses.
>
>
> +4.127 KVM_GET_TSC_STATE
> +----------------------------
> +
> +:Capability: KVM_CAP_PRECISE_TSC
> +:Architectures: x86
> +:Type: vcpu ioctl
> +:Parameters: struct kvm_tsc_state
> +:Returns: 0 on success, < 0 on error
> +
> +::
> +
> + #define KVM_TSC_STATE_TIMESTAMP_VALID 1
> + #define KVM_TSC_STATE_TSC_ADJUST_VALID 2
> + struct kvm_tsc_state {
> + __u32 flags;
> + __u64 nsec;
> + __u64 tsc;
> + __u64 tsc_adjust;
> + };
> +
> +flags values for ``struct kvm_tsc_state``:
> +
> +``KVM_TSC_STATE_TIMESTAMP_VALID``
> +
> + ``nsec`` contains nanoseconds from unix epoch.
> + Always set by KVM_GET_TSC_STATE, might be omitted in KVM_SET_TSC_STATE
> +
> +``KVM_TSC_STATE_TSC_ADJUST_VALID``
> +
> + ``tsc_adjust`` contains valid IA32_TSC_ADJUST value
> +
> +
> +This ioctl allows the user space to read the guest's IA32_TSC,IA32_TSC_ADJUST,
> +and the current value of host's CLOCK_REALTIME clock in nanoseconds since unix
> +epoch.
Why is CLOCK_REALTIME necessary at all? kvmclock uses the host clock as
a time base, but for TSC it should not be necessary.
> +
> +
> +4.128 KVM_SET_TSC_STATE
> +----------------------------
> +
> +:Capability: KVM_CAP_PRECISE_TSC
> +:Architectures: x86
> +:Type: vcpu ioctl
> +:Parameters: struct kvm_tsc_state
> +:Returns: 0 on success, < 0 on error
> +
> +::
> +
> +This ioctl allows to reconstruct the guest's IA32_TSC and TSC_ADJUST value
> +from the state obtained in the past by KVM_GET_TSC_STATE on the same vCPU.
> +
> +If 'KVM_TSC_STATE_TIMESTAMP_VALID' is set in flags,
> +KVM will adjust the guest TSC value by the time that passed since the moment
> +CLOCK_REALTIME timestamp was saved in the struct and current value of
> +CLOCK_REALTIME, and set the guest's TSC to the new value.
This introduces the wraparound bug in Linux timekeeping, doesnt it?
> +
> +Otherwise KVM will set the guest TSC value to the exact value as given
> +in the struct.
> +
> +if KVM_TSC_STATE_TSC_ADJUST_VALID is set, and guest supports IA32_MSR_TSC_ADJUST,
> +then its value will be set to the given value from the struct.
> +
> +It is assumed that either both ioctls will be run on the same machine,
> +or that source and destination machines have synchronized clocks.
> 5. The kvm_run structure
> ========================
>
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index a3fdc16cfd6f3..9b8a2fe3a2398 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -2438,6 +2438,21 @@ static bool kvm_get_walltime_and_clockread(struct timespec64 *ts,
>
> return gtod_is_based_on_tsc(do_realtime(ts, tsc_timestamp));
> }
> +
> +
> +static void kvm_get_walltime(u64 *walltime_ns, u64 *host_tsc)
> +{
> + struct timespec64 ts;
> +
> + if (kvm_get_walltime_and_clockread(&ts, host_tsc)) {
> + *walltime_ns = timespec64_to_ns(&ts);
> + return;
> + }
> +
> + *host_tsc = rdtsc();
> + *walltime_ns = ktime_get_real_ns();
> +}
> +
> #endif
>
> /*
> @@ -3757,6 +3772,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
> case KVM_CAP_X86_USER_SPACE_MSR:
> case KVM_CAP_X86_MSR_FILTER:
> case KVM_CAP_ENFORCE_PV_FEATURE_CPUID:
> +#ifdef CONFIG_X86_64
> + case KVM_CAP_PRECISE_TSC:
> +#endif
> r = 1;
> break;
> case KVM_CAP_SYNC_REGS:
> @@ -4999,6 +5017,61 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
> case KVM_GET_SUPPORTED_HV_CPUID:
> r = kvm_ioctl_get_supported_hv_cpuid(vcpu, argp);
> break;
> +#ifdef CONFIG_X86_64
> + case KVM_GET_TSC_STATE: {
> + struct kvm_tsc_state __user *user_tsc_state = argp;
> + u64 host_tsc;
> +
> + struct kvm_tsc_state tsc_state = {
> + .flags = KVM_TSC_STATE_TIMESTAMP_VALID
> + };
> +
> + kvm_get_walltime(&tsc_state.nsec, &host_tsc);
> + tsc_state.tsc = kvm_read_l1_tsc(vcpu, host_tsc);
> +
> + if (guest_cpuid_has(vcpu, X86_FEATURE_TSC_ADJUST)) {
> + tsc_state.tsc_adjust = vcpu->arch.ia32_tsc_adjust_msr;
> + tsc_state.flags |= KVM_TSC_STATE_TSC_ADJUST_VALID;
> + }
> +
> + r = -EFAULT;
> + if (copy_to_user(user_tsc_state, &tsc_state, sizeof(tsc_state)))
> + goto out;
> + r = 0;
> + break;
> + }
> + case KVM_SET_TSC_STATE: {
> + struct kvm_tsc_state __user *user_tsc_state = argp;
> + struct kvm_tsc_state tsc_state;
> + u64 host_tsc, wall_nsec;
> +
> + u64 new_guest_tsc, new_guest_tsc_offset;
> +
> + r = -EFAULT;
> + if (copy_from_user(&tsc_state, user_tsc_state, sizeof(tsc_state)))
> + goto out;
> +
> + kvm_get_walltime(&wall_nsec, &host_tsc);
> + new_guest_tsc = tsc_state.tsc;
> +
> + if (tsc_state.flags & KVM_TSC_STATE_TIMESTAMP_VALID) {
> + s64 diff = wall_nsec - tsc_state.nsec;
> + if (diff >= 0)
> + new_guest_tsc += nsec_to_cycles(vcpu, diff);
> + else
> + new_guest_tsc -= nsec_to_cycles(vcpu, -diff);
> + }
> +
> + new_guest_tsc_offset = new_guest_tsc - kvm_scale_tsc(vcpu, host_tsc);
> + kvm_vcpu_write_tsc_offset(vcpu, new_guest_tsc_offset);
> +
> + if (tsc_state.flags & KVM_TSC_STATE_TSC_ADJUST_VALID)
> + if (guest_cpuid_has(vcpu, X86_FEATURE_TSC_ADJUST))
> + vcpu->arch.ia32_tsc_adjust_msr = tsc_state.tsc_adjust;
> + r = 0;
> + break;
> + }
> +#endif
> default:
> r = -EINVAL;
> }
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 886802b8ffba3..bf4c38fd58291 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -1056,6 +1056,7 @@ struct kvm_ppc_resize_hpt {
> #define KVM_CAP_ENFORCE_PV_FEATURE_CPUID 190
> #define KVM_CAP_SYS_HYPERV_CPUID 191
> #define KVM_CAP_DIRTY_LOG_RING 192
> +#define KVM_CAP_PRECISE_TSC 193
>
> #ifdef KVM_CAP_IRQ_ROUTING
>
> @@ -1169,6 +1170,16 @@ struct kvm_clock_data {
> __u32 pad[9];
> };
>
> +
> +#define KVM_TSC_STATE_TIMESTAMP_VALID 1
> +#define KVM_TSC_STATE_TSC_ADJUST_VALID 2
> +struct kvm_tsc_state {
> + __u32 flags;
> + __u64 nsec;
> + __u64 tsc;
> + __u64 tsc_adjust;
> +};
> +
> /* For KVM_CAP_SW_TLB */
>
> #define KVM_MMU_FSL_BOOKE_NOHV 0
> @@ -1563,6 +1574,10 @@ struct kvm_pv_cmd {
> /* Available with KVM_CAP_DIRTY_LOG_RING */
> #define KVM_RESET_DIRTY_RINGS _IO(KVMIO, 0xc7)
>
> +/* Available with KVM_CAP_PRECISE_TSC*/
> +#define KVM_SET_TSC_STATE _IOW(KVMIO, 0xc8, struct kvm_tsc_state)
> +#define KVM_GET_TSC_STATE _IOR(KVMIO, 0xc9, struct kvm_tsc_state)
> +
> /* Secure Encrypted Virtualization command */
> enum sev_cmd_id {
> /* Guest initialization commands */
> --
> 2.26.2
next prev parent reply other threads:[~2020-12-08 14:25 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-03 17:11 [PATCH v2 0/3] RFC: Precise TSC migration Maxim Levitsky
2020-12-03 17:11 ` [PATCH v2 1/3] KVM: x86: implement KVM_{GET|SET}_TSC_STATE Maxim Levitsky
2020-12-06 16:19 ` Thomas Gleixner
2020-12-07 12:16 ` Maxim Levitsky
2020-12-07 13:16 ` Vitaly Kuznetsov
2020-12-07 17:41 ` Thomas Gleixner
2020-12-08 9:48 ` Peter Zijlstra
2020-12-10 11:42 ` Paolo Bonzini
2020-12-10 12:14 ` Peter Zijlstra
2020-12-10 12:22 ` Paolo Bonzini
2020-12-10 13:01 ` Peter Zijlstra
2020-12-10 20:20 ` Thomas Gleixner
2020-12-07 16:38 ` Thomas Gleixner
2020-12-07 16:53 ` Andy Lutomirski
2020-12-07 17:00 ` Maxim Levitsky
2020-12-07 18:04 ` Andy Lutomirski
2020-12-07 23:11 ` Marcelo Tosatti
2020-12-08 17:43 ` Andy Lutomirski
2020-12-08 19:24 ` Thomas Gleixner
2020-12-08 20:32 ` Andy Lutomirski
2020-12-09 0:19 ` Thomas Gleixner
2020-12-09 4:08 ` Andy Lutomirski
2020-12-09 10:14 ` Thomas Gleixner
2020-12-10 23:42 ` Andy Lutomirski
2020-12-08 11:24 ` Maxim Levitsky
2020-12-08 9:35 ` Peter Zijlstra
2020-12-07 23:34 ` Marcelo Tosatti
2020-12-07 17:29 ` Oliver Upton
2020-12-08 11:13 ` Maxim Levitsky
2020-12-08 15:57 ` Oliver Upton
2020-12-08 15:58 ` Oliver Upton
2020-12-08 17:10 ` Maxim Levitsky
2020-12-08 16:40 ` Thomas Gleixner
2020-12-08 17:08 ` Maxim Levitsky
2020-12-10 11:48 ` Paolo Bonzini
2020-12-10 14:25 ` Maxim Levitsky
2020-12-07 23:29 ` Marcelo Tosatti [this message]
2020-12-08 14:50 ` Maxim Levitsky
2020-12-08 16:02 ` Thomas Gleixner
2020-12-08 16:25 ` Maxim Levitsky
2020-12-08 17:33 ` Andy Lutomirski
2020-12-08 21:25 ` Thomas Gleixner
2020-12-08 18:12 ` Marcelo Tosatti
2020-12-08 21:35 ` Thomas Gleixner
2020-12-08 21:20 ` Thomas Gleixner
2020-12-10 11:48 ` Paolo Bonzini
2020-12-10 14:52 ` Maxim Levitsky
2020-12-10 15:16 ` Andy Lutomirski
2020-12-10 17:59 ` Oliver Upton
2020-12-10 18:05 ` Paolo Bonzini
2020-12-10 18:13 ` Oliver Upton
2020-12-10 21:25 ` Thomas Gleixner
2020-12-10 22:01 ` Andy Lutomirski
2020-12-10 22:28 ` Thomas Gleixner
2020-12-10 23:19 ` Andy Lutomirski
2020-12-11 0:03 ` Thomas Gleixner
2020-12-08 18:11 ` Marcelo Tosatti
2020-12-08 21:33 ` Thomas Gleixner
2020-12-09 16:34 ` Marcelo Tosatti
2020-12-09 20:58 ` Thomas Gleixner
2020-12-10 15:26 ` Marcelo Tosatti
2020-12-10 21:48 ` Thomas Gleixner
2020-12-11 0:27 ` Marcelo Tosatti
2020-12-11 13:30 ` Thomas Gleixner
2020-12-11 14:18 ` Marcelo Tosatti
2020-12-11 21:04 ` Thomas Gleixner
2020-12-11 21:59 ` Paolo Bonzini
2020-12-12 13:03 ` Thomas Gleixner
2020-12-15 10:59 ` Marcelo Tosatti
2020-12-15 16:55 ` Andy Lutomirski
2020-12-15 22:34 ` Thomas Gleixner
2020-12-11 13:37 ` Paolo Bonzini
2020-12-08 17:35 ` Marcelo Tosatti
2020-12-03 17:11 ` [PATCH v2 2/3] KVM: x86: introduce KVM_X86_QUIRK_TSC_HOST_ACCESS Maxim Levitsky
2020-12-03 17:11 ` [PATCH v2 3/3] kvm/selftests: update tsc_msrs_test to cover KVM_X86_QUIRK_TSC_HOST_ACCESS Maxim Levitsky
2020-12-07 23:16 ` [PATCH v2 0/3] RFC: Precise TSC migration Marcelo Tosatti
2020-12-10 11:48 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201207232920.GD27492@fuller.cnet \
--to=mtosatti@redhat.com \
--cc=bp@alien8.de \
--cc=corbet@lwn.net \
--cc=drjones@redhat.com \
--cc=hpa@zytor.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=mlevitsk@redhat.com \
--cc=oupton@google.com \
--cc=pbonzini@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=shuah@kernel.org \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).