From: Yifei Jiang <jiangyifei@huawei.com>
To: <qemu-devel@nongnu.org>, <qemu-riscv@nongnu.org>
Cc: <kvm-riscv@lists.infradead.org>, <kvm@vger.kernel.org>,
<libvir-list@redhat.com>, <anup.patel@wdc.com>,
<palmer@dabbelt.com>, <Alistair.Francis@wdc.com>,
<sagark@eecs.berkeley.edu>, <kbastian@mail.uni-paderborn.de>,
<bin.meng@windriver.com>, <fanliang@huawei.com>,
<wu.wubin@huawei.com>, <zhang.zhanghailiang@huawei.com>,
<yinyipeng1@huawei.com>, Yifei Jiang <jiangyifei@huawei.com>
Subject: [PATCH RFC v5 01/12] linux-header: Update linux/kvm.h
Date: Mon, 12 Apr 2021 14:52:35 +0800 [thread overview]
Message-ID: <20210412065246.1853-2-jiangyifei@huawei.com> (raw)
In-Reply-To: <20210412065246.1853-1-jiangyifei@huawei.com>
Update linux-headers/linux/kvm.h from
https://github.com/avpatel/linux/tree/riscv_kvm_v17.
Only use this header file, so here do not update all linux headers by
update-linux-headers.sh until above KVM series is accepted.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
---
| 97 +++++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
--git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index 020b62a619..1e92fd2a76 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -216,6 +216,20 @@ struct kvm_hyperv_exit {
} u;
};
+struct kvm_xen_exit {
+#define KVM_EXIT_XEN_HCALL 1
+ __u32 type;
+ union {
+ struct {
+ __u32 longmode;
+ __u32 cpl;
+ __u64 input;
+ __u64 result;
+ __u64 params[6];
+ } hcall;
+ } u;
+};
+
#define KVM_S390_GET_SKEYS_NONE 1
#define KVM_S390_SKEYS_MAX 1048576
@@ -251,6 +265,10 @@ struct kvm_hyperv_exit {
#define KVM_EXIT_X86_RDMSR 29
#define KVM_EXIT_X86_WRMSR 30
#define KVM_EXIT_DIRTY_RING_FULL 31
+#define KVM_EXIT_AP_RESET_HOLD 32
+#define KVM_EXIT_X86_BUS_LOCK 33
+#define KVM_EXIT_XEN 34
+#define KVM_EXIT_RISCV_SBI 35
/* For KVM_EXIT_INTERNAL_ERROR */
/* Emulate instruction failed. */
@@ -427,6 +445,15 @@ struct kvm_run {
__u32 index; /* kernel -> user */
__u64 data; /* kernel <-> user */
} msr;
+ /* KVM_EXIT_XEN */
+ struct kvm_xen_exit xen;
+ /* KVM_EXIT_RISCV_SBI */
+ struct {
+ unsigned long extension_id;
+ unsigned long function_id;
+ unsigned long args[6];
+ unsigned long ret[2];
+ } riscv_sbi;
/* Fix the size of the union. */
char padding[256];
};
@@ -573,6 +600,7 @@ struct kvm_vapic_addr {
#define KVM_MP_STATE_CHECK_STOP 6
#define KVM_MP_STATE_OPERATING 7
#define KVM_MP_STATE_LOAD 8
+#define KVM_MP_STATE_AP_RESET_HOLD 9
struct kvm_mp_state {
__u32 mp_state;
@@ -1056,6 +1084,8 @@ struct kvm_ppc_resize_hpt {
#define KVM_CAP_ENFORCE_PV_FEATURE_CPUID 190
#define KVM_CAP_SYS_HYPERV_CPUID 191
#define KVM_CAP_DIRTY_LOG_RING 192
+#define KVM_CAP_X86_BUS_LOCK_EXIT 193
+#define KVM_CAP_PPC_DAWR1 194
#ifdef KVM_CAP_IRQ_ROUTING
@@ -1129,6 +1159,11 @@ struct kvm_x86_mce {
#endif
#ifdef KVM_CAP_XEN_HVM
+#define KVM_XEN_HVM_CONFIG_HYPERCALL_MSR (1 << 0)
+#define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL (1 << 1)
+#define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2)
+#define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3)
+
struct kvm_xen_hvm_config {
__u32 flags;
__u32 msr;
@@ -1563,6 +1598,57 @@ struct kvm_pv_cmd {
/* Available with KVM_CAP_DIRTY_LOG_RING */
#define KVM_RESET_DIRTY_RINGS _IO(KVMIO, 0xc7)
+/* Per-VM Xen attributes */
+#define KVM_XEN_HVM_GET_ATTR _IOWR(KVMIO, 0xc8, struct kvm_xen_hvm_attr)
+#define KVM_XEN_HVM_SET_ATTR _IOW(KVMIO, 0xc9, struct kvm_xen_hvm_attr)
+
+struct kvm_xen_hvm_attr {
+ __u16 type;
+ __u16 pad[3];
+ union {
+ __u8 long_mode;
+ __u8 vector;
+ struct {
+ __u64 gfn;
+ } shared_info;
+ __u64 pad[8];
+ } u;
+};
+
+/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO */
+#define KVM_XEN_ATTR_TYPE_LONG_MODE 0x0
+#define KVM_XEN_ATTR_TYPE_SHARED_INFO 0x1
+#define KVM_XEN_ATTR_TYPE_UPCALL_VECTOR 0x2
+
+/* Per-vCPU Xen attributes */
+#define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr)
+#define KVM_XEN_VCPU_SET_ATTR _IOW(KVMIO, 0xcb, struct kvm_xen_vcpu_attr)
+
+struct kvm_xen_vcpu_attr {
+ __u16 type;
+ __u16 pad[3];
+ union {
+ __u64 gpa;
+ __u64 pad[8];
+ struct {
+ __u64 state;
+ __u64 state_entry_time;
+ __u64 time_running;
+ __u64 time_runnable;
+ __u64 time_blocked;
+ __u64 time_offline;
+ } runstate;
+ } u;
+};
+
+/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO */
+#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO 0x0
+#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_TIME_INFO 0x1
+#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADDR 0x2
+#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT 0x3
+#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA 0x4
+#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST 0x5
+
/* Secure Encrypted Virtualization command */
enum sev_cmd_id {
/* Guest initialization commands */
@@ -1591,6 +1677,8 @@ enum sev_cmd_id {
KVM_SEV_DBG_ENCRYPT,
/* Guest certificates commands */
KVM_SEV_CERT_EXPORT,
+ /* Attestation report */
+ KVM_SEV_GET_ATTESTATION_REPORT,
KVM_SEV_NR_MAX,
};
@@ -1643,6 +1731,12 @@ struct kvm_sev_dbg {
__u32 len;
};
+struct kvm_sev_attestation_report {
+ __u8 mnonce[16];
+ __u64 uaddr;
+ __u32 len;
+};
+
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2)
@@ -1764,4 +1858,7 @@ struct kvm_dirty_gfn {
__u64 offset;
};
+#define KVM_BUS_LOCK_DETECTION_OFF (1 << 0)
+#define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1)
+
#endif /* __LINUX_KVM_H */
--
2.19.1
next prev parent reply other threads:[~2021-04-12 6:53 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-12 6:52 [PATCH RFC v5 00/12] Add riscv kvm accel support Yifei Jiang
2021-04-12 6:52 ` Yifei Jiang [this message]
2021-04-12 6:52 ` [PATCH RFC v5 02/12] target/riscv: Add target/riscv/kvm.c to place the public kvm interface Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 03/12] target/riscv: Implement function kvm_arch_init_vcpu Yifei Jiang
2021-04-14 22:32 ` Alistair Francis
2021-04-12 6:52 ` [PATCH RFC v5 04/12] target/riscv: Implement kvm_arch_get_registers Yifei Jiang
2021-04-14 22:39 ` Alistair Francis
2021-04-12 6:52 ` [PATCH RFC v5 05/12] target/riscv: Implement kvm_arch_put_registers Yifei Jiang
2021-04-14 22:46 ` Alistair Francis
2021-04-12 6:52 ` [PATCH RFC v5 06/12] target/riscv: Support start kernel directly by KVM Yifei Jiang
2021-04-14 22:48 ` Alistair Francis
2021-04-12 6:52 ` [PATCH RFC v5 07/12] hw/riscv: PLIC update external interrupt by KVM when kvm enabled Yifei Jiang
2021-04-14 22:50 ` Alistair Francis
2021-04-30 4:53 ` Anup Patel
2021-05-06 7:59 ` Jiangyifei
2021-04-12 6:52 ` [PATCH RFC v5 08/12] target/riscv: Handle KVM_EXIT_RISCV_SBI exit Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 09/12] target/riscv: Add host cpu type Yifei Jiang
2021-04-14 22:33 ` Alistair Francis
2021-04-12 6:52 ` [PATCH RFC v5 10/12] target/riscv: Add kvm_riscv_get/put_regs_timer Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 11/12] target/riscv: Implement virtual time adjusting with vm state changing Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 12/12] target/riscv: Support virtual time context synchronization Yifei Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210412065246.1853-2-jiangyifei@huawei.com \
--to=jiangyifei@huawei.com \
--cc=Alistair.Francis@wdc.com \
--cc=anup.patel@wdc.com \
--cc=bin.meng@windriver.com \
--cc=fanliang@huawei.com \
--cc=kbastian@mail.uni-paderborn.de \
--cc=kvm-riscv@lists.infradead.org \
--cc=kvm@vger.kernel.org \
--cc=libvir-list@redhat.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=sagark@eecs.berkeley.edu \
--cc=wu.wubin@huawei.com \
--cc=yinyipeng1@huawei.com \
--cc=zhang.zhanghailiang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).