kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pierre Morel <pmorel@linux.ibm.com>
To: kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org,
	borntraeger@de.ibm.com, frankja@linux.ibm.com, cohuck@redhat.com,
	david@redhat.com, thuth@redhat.com, imbrenda@linux.ibm.com,
	hca@linux.ibm.com, gor@linux.ibm.com, pmorel@linux.ibm.com
Subject: [PATCH v5 1/1] s390x: KVM: accept STSI for CPU topology information
Date: Mon, 22 Nov 2021 14:14:43 +0100	[thread overview]
Message-ID: <20211122131443.66632-2-pmorel@linux.ibm.com> (raw)
In-Reply-To: <20211122131443.66632-1-pmorel@linux.ibm.com>

We let the userland hypervisor know if the machine support the CPU
topology facility using a new KVM capability: KVM_CAP_S390_CPU_TOPOLOGY.

The PTF instruction will report a topology change if there is any change
with a previous STSI_15_1_2 SYSIB.
Changes inside a STSI_15_1_2 SYSIB occur if CPU bits are set or clear
inside the CPU Topology List Entry CPU mask field, which happens with
changes in CPU polarization, dedication, CPU types and adding or
removing CPUs in a socket.

The reporting to the guest is done using the Multiprocessor
Topology-Change-Report (MTCR) bit of the utility entry of the guest's
SCA which will be cleared during the interpretation of PTF.

To check if the topology has been modified we use a new field of the
arch vCPU to save the previous real CPU ID at the end of a schedule
and verify on next schedule that the CPU used is in the same socket.

We assume in this patch:
- no polarization change: only horizontal polarization is currently
  used in linux.
- no CPU Type change: only IFL Type are supported in Linux
- Dedication: with this patch, only a complete dedicated CPU stack can
  take benefit of the CPU Topology.

STSI(15.1.x) gives information on the CPU configuration topology.
Let's accept the interception of STSI with the function code 15 and
let the userland part of the hypervisor handle it when userland
support the CPU Topology facility.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
---
 Documentation/virt/kvm/api.rst   | 16 ++++++++++
 arch/s390/include/asm/kvm_host.h | 14 ++++++---
 arch/s390/kvm/kvm-s390.c         | 52 +++++++++++++++++++++++++++++++-
 arch/s390/kvm/priv.c             |  7 ++++-
 arch/s390/kvm/vsie.c             |  3 ++
 include/uapi/linux/kvm.h         |  1 +
 6 files changed, 87 insertions(+), 6 deletions(-)

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index aeeb071c7688..e5c9da0782a6 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -7484,3 +7484,19 @@ The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset
 of the result of KVM_CHECK_EXTENSION.  KVM will forward to userspace
 the hypercalls whose corresponding bit is in the argument, and return
 ENOSYS for the others.
+
+8.17 KVM_CAP_S390_CPU_TOPOLOGY
+------------------------------
+
+:Capability: KVM_CAP_S390_CPU_TOPOLOGY
+:Architectures: s390
+:Type: vm
+
+This capability indicates that kvm will provide the S390 CPU Topology facility
+which consist of the interpretation of the PTF instruction for the Function
+Code 2 along with interception and forwarding of both the PTF instruction
+with function Codes 0 or 1 and the STSI(15,1,x) instruction to the userland
+hypervisor.
+
+The stfle facility 11, CPU Topology facility, should not be provided to the
+guest without this capability.
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index a604d51acfc8..cccc09a8fdab 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -95,15 +95,19 @@ struct bsca_block {
 	union ipte_control ipte_control;
 	__u64	reserved[5];
 	__u64	mcn;
-	__u64	reserved2;
+#define ESCA_UTILITY_MTCR	0x8000
+	__u16	utility;
+	__u8	reserved2[6];
 	struct bsca_entry cpu[KVM_S390_BSCA_CPU_SLOTS];
 };
 
 struct esca_block {
 	union ipte_control ipte_control;
-	__u64   reserved1[7];
+	__u64   reserved1[6];
+	__u16	utility;
+	__u8	reserved2[6];
 	__u64   mcn[4];
-	__u64   reserved2[20];
+	__u64   reserved3[20];
 	struct esca_entry cpu[KVM_S390_ESCA_CPU_SLOTS];
 };
 
@@ -228,7 +232,7 @@ struct kvm_s390_sie_block {
 	__u8	icptcode;		/* 0x0050 */
 	__u8	icptstatus;		/* 0x0051 */
 	__u16	ihcpu;			/* 0x0052 */
-	__u8	reserved54;		/* 0x0054 */
+	__u8	mtcr;			/* 0x0054 */
 #define IICTL_CODE_NONE		 0x00
 #define IICTL_CODE_MCHK		 0x01
 #define IICTL_CODE_EXT		 0x02
@@ -247,6 +251,7 @@ struct kvm_s390_sie_block {
 #define ECB_SPECI	0x08
 #define ECB_SRSI	0x04
 #define ECB_HOSTPROTINT	0x02
+#define ECB_PTF		0x01
 	__u8	ecb;			/* 0x0061 */
 #define ECB2_CMMA	0x80
 #define ECB2_IEP	0x20
@@ -748,6 +753,7 @@ struct kvm_vcpu_arch {
 	bool skey_enabled;
 	struct kvm_s390_pv_vcpu pv;
 	union diag318_info diag318_info;
+	int prev_cpu;
 };
 
 struct kvm_vm_stat {
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 14a18ba5ff2c..b40d2a20bce0 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -606,6 +606,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_S390_PROTECTED:
 		r = is_prot_virt_host();
 		break;
+	case KVM_CAP_S390_CPU_TOPOLOGY:
+		r = test_facility(11);
+		break;
 	default:
 		r = 0;
 	}
@@ -817,6 +820,20 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
 		icpt_operexc_on_all_vcpus(kvm);
 		r = 0;
 		break;
+	case KVM_CAP_S390_CPU_TOPOLOGY:
+		r = -EINVAL;
+		mutex_lock(&kvm->lock);
+		if (kvm->created_vcpus) {
+			r = -EBUSY;
+		} else if (test_facility(11)) {
+			set_kvm_facility(kvm->arch.model.fac_mask, 11);
+			set_kvm_facility(kvm->arch.model.fac_list, 11);
+			r = 0;
+		}
+		mutex_unlock(&kvm->lock);
+		VM_EVENT(kvm, 3, "ENABLE: CPU TOPOLOGY %s",
+			 r ? "(not available)" : "(success)");
+		break;
 	default:
 		r = -EINVAL;
 		break;
@@ -3089,18 +3106,44 @@ __u64 kvm_s390_get_cpu_timer(struct kvm_vcpu *vcpu)
 	return value;
 }
 
-void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+static void kvm_s390_set_mtcr(struct kvm_vcpu *vcpu)
 {
+	struct esca_block *esca = vcpu->kvm->arch.sca;
 
+	if (vcpu->arch.sie_block->ecb & ECB_PTF) {
+		ipte_lock(vcpu);
+		WRITE_ONCE(esca->utility, ESCA_UTILITY_MTCR);
+		ipte_unlock(vcpu);
+	}
+}
+
+void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+{
 	gmap_enable(vcpu->arch.enabled_gmap);
 	kvm_s390_set_cpuflags(vcpu, CPUSTAT_RUNNING);
 	if (vcpu->arch.cputm_enabled && !is_vcpu_idle(vcpu))
 		__start_cpu_timer_accounting(vcpu);
 	vcpu->cpu = cpu;
+
+	/*
+	 * With PTF interpretation the guest will be aware of topology
+	 * change when the Multiprocessor Topology-Change-Report is pending.
+	 * We check for events modifying the result of STSI_15_2:
+	 * - A new vCPU has been hotplugged (prev_cpu == -1)
+	 * - The real CPU backing up the vCPU moved to another socket
+	 */
+	if (vcpu->arch.sie_block->ecb & ECB_PTF) {
+		if (vcpu->arch.prev_cpu == -1 ||
+		    (topology_physical_package_id(cpu) !=
+		     topology_physical_package_id(vcpu->arch.prev_cpu)))
+			kvm_s390_set_mtcr(vcpu);
+	}
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	/* Remember which CPU was backing the vCPU */
+	vcpu->arch.prev_cpu = vcpu->cpu;
 	vcpu->cpu = -1;
 	if (vcpu->arch.cputm_enabled && !is_vcpu_idle(vcpu))
 		__stop_cpu_timer_accounting(vcpu);
@@ -3220,6 +3263,13 @@ static int kvm_s390_vcpu_setup(struct kvm_vcpu *vcpu)
 		vcpu->arch.sie_block->ecb |= ECB_HOSTPROTINT;
 	if (test_kvm_facility(vcpu->kvm, 9))
 		vcpu->arch.sie_block->ecb |= ECB_SRSI;
+
+	/* PTF needs guest facilities to enable interpretation */
+	if (test_kvm_facility(vcpu->kvm, 11))
+		vcpu->arch.sie_block->ecb |= ECB_PTF;
+	/* Set the prev_cpu value to an impossible value to detect a new vcpu */
+	vcpu->arch.prev_cpu = -1;
+
 	if (test_kvm_facility(vcpu->kvm, 73))
 		vcpu->arch.sie_block->ecb |= ECB_TE;
 	if (!kvm_is_ucontrol(vcpu->kvm))
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 417154b314a6..26d165733496 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -861,7 +861,8 @@ static int handle_stsi(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
 		return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
 
-	if (fc > 3) {
+	if ((fc > 3 && fc != 15) ||
+	    (fc == 15 && !test_kvm_facility(vcpu->kvm, 11))) {
 		kvm_s390_set_psw_cc(vcpu, 3);
 		return 0;
 	}
@@ -898,6 +899,10 @@ static int handle_stsi(struct kvm_vcpu *vcpu)
 			goto out_no_data;
 		handle_stsi_3_2_2(vcpu, (void *) mem);
 		break;
+	case 15:
+		trace_kvm_s390_handle_stsi(vcpu, fc, sel1, sel2, operand2);
+		insert_stsi_usr_data(vcpu, operand2, ar, fc, sel1, sel2);
+		return -EREMOTE;
 	}
 	if (kvm_s390_pv_cpu_is_protected(vcpu)) {
 		memcpy((void *)sida_origin(vcpu->arch.sie_block), (void *)mem,
diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index acda4b6fc851..da0397cf2cc7 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -503,6 +503,9 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 	/* Host-protection-interruption introduced with ESOP */
 	if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_ESOP))
 		scb_s->ecb |= scb_o->ecb & ECB_HOSTPROTINT;
+	/* CPU Topology */
+	if (test_kvm_facility(vcpu->kvm, 11))
+		scb_s->ecb |= scb_o->ecb & ECB_PTF;
 	/* transactional execution */
 	if (test_kvm_facility(vcpu->kvm, 73) && wants_tx) {
 		/* remap the prefix is tx is toggled on */
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 1daa45268de2..273c62dfbe9a 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -1131,6 +1131,7 @@ struct kvm_ppc_resize_hpt {
 #define KVM_CAP_EXIT_ON_EMULATION_FAILURE 204
 #define KVM_CAP_ARM_MTE 205
 #define KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM 206
+#define KVM_CAP_S390_CPU_TOPOLOGY 207
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
-- 
2.27.0


  reply	other threads:[~2021-11-22 13:14 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-22 13:14 [PATCH v5 0/1] s390x: KVM: CPU Topology Pierre Morel
2021-11-22 13:14 ` Pierre Morel [this message]
2021-12-07  9:43   ` [PATCH v5 1/1] s390x: KVM: accept STSI for CPU topology information Pierre Morel
2021-12-09 12:36   ` Claudio Imbrenda
2021-12-09 13:31     ` Pierre Morel
2021-12-09 15:54     ` Heiko Carstens
2021-12-13 10:05       ` Pierre Morel
2021-12-13 14:26       ` Pierre Morel
2021-12-13 15:21         ` Heiko Carstens
2021-12-13 15:46           ` Pierre Morel
2021-12-09 16:08   ` Janosch Frank
2021-12-13 10:16     ` Pierre Morel
2021-12-14  9:01 ` [PATCH v5 0/1] s390x: KVM: CPU Topology Alexandra Winter
2021-12-16 15:16   ` Pierre Morel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211122131443.66632-2-pmorel@linux.ibm.com \
    --to=pmorel@linux.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=frankja@linux.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=hca@linux.ibm.com \
    --cc=imbrenda@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).