From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Like Xu <like.xu.linux@gmail.com>
Subject: [PATCH 14/22] KVM: VMX: Use kvm-x86-ops.h to fill vmx_x86_ops
Date: Fri, 28 Jan 2022 00:52:00 +0000 [thread overview]
Message-ID: <20220128005208.4008533-15-seanjc@google.com> (raw)
In-Reply-To: <20220128005208.4008533-1-seanjc@google.com>
Fill vmx_x86_ops by including kvm-x86-ops.h and defining the appropriate
macros. Use the default for KVM_X86_APICV_OP as VMX doesn't have a
single prefix for all APICv ops, and the majority of APICv ops that do
conform to the kvm_x86_ops names do so with the standard vmx_ prefix.
Document the handful of exceptions where vmx_x86_ops deviates from the
"default".
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/vmx/vmx.c | 149 +++++++----------------------------------
1 file changed, 25 insertions(+), 124 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 2138f7439a19..f22d02fe4df3 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7702,141 +7702,42 @@ static bool vmx_check_apicv_inhibit_reasons(ulong bit)
return supported & BIT(bit);
}
+/* Not currently implemented for VMX. */
+#define vmx_vm_destroy NULL
+#define vmx_vcpu_blocking NULL
+#define vmx_vcpu_unblocking NULL
+
+/* Redirects to common KVM helpers (hooks provided for SEV-ES). */
+#define vmx_complete_emulated_msr kvm_complete_insn_gp
+#define vmx_vcpu_deliver_sipi_vector kvm_vcpu_deliver_sipi_vector
+
+/* Redirects to preserve VMX's preferred nomenclature. */
+#define vmx_has_wbinvd_exit cpu_has_vmx_wbinvd_exit
+#define vmx_dy_apicv_has_pending_interrupt pi_has_pending_interrupt
+
+/* VMX preemption timer support is 64-bit only as it uses 64-bit division. */
+#ifndef CONFIG_X86_64
+#define vmx_set_hv_timer NULL
+#define vmx_cancel_hv_timer NULL
+#endif
+
static struct kvm_x86_ops vmx_x86_ops __initdata = {
.name = "kvm_intel",
-
- .hardware_unsetup = vmx_hardware_unsetup,
-
- .hardware_enable = vmx_hardware_enable,
- .hardware_disable = vmx_hardware_disable,
- .cpu_has_accelerated_tpr = vmx_cpu_has_accelerated_tpr,
- .has_emulated_msr = vmx_has_emulated_msr,
-
.vm_size = sizeof(struct kvm_vmx),
- .vm_init = vmx_vm_init,
-
- .vcpu_create = vmx_vcpu_create,
- .vcpu_free = vmx_vcpu_free,
- .vcpu_reset = vmx_vcpu_reset,
-
- .prepare_switch_to_guest = vmx_prepare_switch_to_guest,
- .vcpu_load = vmx_vcpu_load,
- .vcpu_put = vmx_vcpu_put,
-
- .update_exception_bitmap = vmx_update_exception_bitmap,
- .get_msr_feature = vmx_get_msr_feature,
- .get_msr = vmx_get_msr,
- .set_msr = vmx_set_msr,
- .get_segment_base = vmx_get_segment_base,
- .get_segment = vmx_get_segment,
- .set_segment = vmx_set_segment,
- .get_cpl = vmx_get_cpl,
- .get_cs_db_l_bits = vmx_get_cs_db_l_bits,
- .set_cr0 = vmx_set_cr0,
- .is_valid_cr4 = vmx_is_valid_cr4,
- .set_cr4 = vmx_set_cr4,
- .set_efer = vmx_set_efer,
- .get_idt = vmx_get_idt,
- .set_idt = vmx_set_idt,
- .get_gdt = vmx_get_gdt,
- .set_gdt = vmx_set_gdt,
- .set_dr7 = vmx_set_dr7,
- .sync_dirty_debug_regs = vmx_sync_dirty_debug_regs,
- .cache_reg = vmx_cache_reg,
- .get_rflags = vmx_get_rflags,
- .set_rflags = vmx_set_rflags,
- .get_if_flag = vmx_get_if_flag,
-
- .flush_tlb_all = vmx_flush_tlb_all,
- .flush_tlb_current = vmx_flush_tlb_current,
- .flush_tlb_gva = vmx_flush_tlb_gva,
- .flush_tlb_guest = vmx_flush_tlb_guest,
-
- .vcpu_pre_run = vmx_vcpu_pre_run,
- .vcpu_run = vmx_vcpu_run,
- .handle_exit = vmx_handle_exit,
- .skip_emulated_instruction = vmx_skip_emulated_instruction,
- .update_emulated_instruction = vmx_update_emulated_instruction,
- .set_interrupt_shadow = vmx_set_interrupt_shadow,
- .get_interrupt_shadow = vmx_get_interrupt_shadow,
- .patch_hypercall = vmx_patch_hypercall,
- .inject_irq = vmx_inject_irq,
- .inject_nmi = vmx_inject_nmi,
- .queue_exception = vmx_queue_exception,
- .cancel_injection = vmx_cancel_injection,
- .interrupt_allowed = vmx_interrupt_allowed,
- .nmi_allowed = vmx_nmi_allowed,
- .get_nmi_mask = vmx_get_nmi_mask,
- .set_nmi_mask = vmx_set_nmi_mask,
- .enable_nmi_window = vmx_enable_nmi_window,
- .enable_irq_window = vmx_enable_irq_window,
- .update_cr8_intercept = vmx_update_cr8_intercept,
- .set_virtual_apic_mode = vmx_set_virtual_apic_mode,
- .set_apic_access_page_addr = vmx_set_apic_access_page_addr,
- .refresh_apicv_exec_ctrl = vmx_refresh_apicv_exec_ctrl,
- .load_eoi_exitmap = vmx_load_eoi_exitmap,
- .apicv_post_state_restore = vmx_apicv_post_state_restore,
- .check_apicv_inhibit_reasons = vmx_check_apicv_inhibit_reasons,
- .hwapic_irr_update = vmx_hwapic_irr_update,
- .hwapic_isr_update = vmx_hwapic_isr_update,
- .guest_apic_has_interrupt = vmx_guest_apic_has_interrupt,
- .sync_pir_to_irr = vmx_sync_pir_to_irr,
- .deliver_interrupt = vmx_deliver_interrupt,
- .dy_apicv_has_pending_interrupt = pi_has_pending_interrupt,
-
- .set_tss_addr = vmx_set_tss_addr,
- .set_identity_map_addr = vmx_set_identity_map_addr,
- .get_mt_mask = vmx_get_mt_mask,
-
- .get_exit_info = vmx_get_exit_info,
-
- .vcpu_after_set_cpuid = vmx_vcpu_after_set_cpuid,
-
- .has_wbinvd_exit = cpu_has_vmx_wbinvd_exit,
-
- .get_l2_tsc_offset = vmx_get_l2_tsc_offset,
- .get_l2_tsc_multiplier = vmx_get_l2_tsc_multiplier,
- .write_tsc_offset = vmx_write_tsc_offset,
- .write_tsc_multiplier = vmx_write_tsc_multiplier,
-
- .load_mmu_pgd = vmx_load_mmu_pgd,
-
- .check_intercept = vmx_check_intercept,
- .handle_exit_irqoff = vmx_handle_exit_irqoff,
-
- .request_immediate_exit = vmx_request_immediate_exit,
-
- .sched_in = vmx_sched_in,
-
.cpu_dirty_log_size = PML_ENTITY_NUM,
- .update_cpu_dirty_logging = vmx_update_cpu_dirty_logging,
.pmu_ops = &intel_pmu_ops,
.nested_ops = &vmx_nested_ops,
- .pi_update_irte = vmx_pi_update_irte,
- .pi_start_assignment = vmx_pi_start_assignment,
+#define KVM_X86_OP(func) .func = vmx_##func,
-#ifdef CONFIG_X86_64
- .set_hv_timer = vmx_set_hv_timer,
- .cancel_hv_timer = vmx_cancel_hv_timer,
-#endif
+/* VMX doesn't yet support confidential VMs. */
+#define KVM_X86_CVM_OP(func) .func = NULL,
- .setup_mce = vmx_setup_mce,
+/* Hyper-V hooks are filled at runtime. */
+#define KVM_X86_HYPERV_OP(func) .func = NULL,
- .smi_allowed = vmx_smi_allowed,
- .enter_smm = vmx_enter_smm,
- .leave_smm = vmx_leave_smm,
- .enable_smi_window = vmx_enable_smi_window,
-
- .can_emulate_instruction = vmx_can_emulate_instruction,
- .apic_init_signal_blocked = vmx_apic_init_signal_blocked,
- .migrate_timers = vmx_migrate_timers,
-
- .msr_filter_changed = vmx_msr_filter_changed,
- .complete_emulated_msr = kvm_complete_insn_gp,
-
- .vcpu_deliver_sipi_vector = kvm_vcpu_deliver_sipi_vector,
+#include <asm/kvm-x86-ops.h>
};
static __init void vmx_setup_user_return_msrs(void)
--
2.35.0.rc0.227.g00780c9af4-goog
next prev parent reply other threads:[~2022-01-28 0:54 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-28 0:51 [PATCH 00/22] KVM: x86: Fill *_x86_ops via kvm-x86-ops.h Sean Christopherson
2022-01-28 0:51 ` [PATCH 01/22] KVM: x86: Drop unnecessary and confusing KVM_X86_OP_NULL macro Sean Christopherson
2022-01-28 10:11 ` Paolo Bonzini
2022-01-28 15:42 ` Sean Christopherson
2022-01-31 14:56 ` Paolo Bonzini
2022-01-31 15:19 ` Maxim Levitsky
2022-01-31 16:48 ` Sean Christopherson
2022-01-28 0:51 ` [PATCH 02/22] KVM: x86: Move delivery of non-APICv interrupt into vendor code Sean Christopherson
2022-01-28 0:51 ` [PATCH 03/22] KVM: x86: Drop export for .tlb_flush_current() static_call key Sean Christopherson
2022-01-28 0:51 ` [PATCH 04/22] KVM: x86: Rename kvm_x86_ops pointers to align w/ preferred vendor names Sean Christopherson
2022-01-28 0:51 ` [PATCH 05/22] KVM: x86: Use static_call() for .vcpu_deliver_sipi_vector() Sean Christopherson
2022-01-28 0:51 ` [PATCH 06/22] KVM: VMX: Call vmx_get_cpl() directly in handle_dr() Sean Christopherson
2022-01-28 0:51 ` [PATCH 07/22] KVM: xen: Use static_call() for invoking kvm_x86_ops hooks Sean Christopherson
2022-01-28 0:51 ` [PATCH 08/22] KVM: nVMX: Refactor PMU refresh to avoid referencing kvm_x86_ops.pmu_ops Sean Christopherson
2022-01-28 0:51 ` [PATCH 09/22] KVM: x86: Uninline and export hv_track_root_tdp() Sean Christopherson
2022-01-31 16:19 ` Vitaly Kuznetsov
2022-01-28 0:51 ` [PATCH 10/22] KVM: x86: Unexport kvm_x86_ops Sean Christopherson
2022-01-28 0:51 ` [PATCH 11/22] KVM: x86: Use static_call() for copy/move encryption context ioctls() Sean Christopherson
2022-01-28 0:51 ` [PATCH 12/22] KVM: x86: Allow different macros for APICv, CVM, and Hyper-V kvm_x86_ops Sean Christopherson
2022-01-28 0:51 ` [PATCH 13/22] KVM: VMX: Rename VMX functions to conform to kvm_x86_ops names Sean Christopherson
2022-01-28 0:52 ` Sean Christopherson [this message]
2022-01-28 0:52 ` [PATCH 15/22] KVM: x86: Move get_cs_db_l_bits() helper to SVM Sean Christopherson
2022-01-28 0:52 ` [PATCH 16/22] KVM: SVM: Rename svm_flush_tlb() to svm_flush_tlb_current() Sean Christopherson
2022-01-28 0:52 ` [PATCH 17/22] KVM: SVM: Remove unused MAX_INST_SIZE #define Sean Christopherson
2022-01-28 0:52 ` [PATCH 18/22] KVM: SVM: Rename AVIC helpers to use "avic" prefix instead of "svm" Sean Christopherson
2022-01-28 0:52 ` [PATCH 19/22] KVM: x86: Use more verbose names for mem encrypt kvm_x86_ops hooks Sean Christopherson
2022-01-28 0:52 ` [PATCH 20/22] KVM: SVM: Rename SEV implemenations to conform to " Sean Christopherson
2022-01-28 0:52 ` [PATCH 21/22] KVM: SVM: Rename hook implementations to conform to kvm_x86_ops' names Sean Christopherson
2022-01-28 0:52 ` [PATCH 22/22] KVM: SVM: Use kvm-x86-ops.h to fill svm_x86_ops Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220128005208.4008533-15-seanjc@google.com \
--to=seanjc@google.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=like.xu.linux@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).