From: Matthew Rosato <mjrosato@linux.ibm.com>
To: linux-s390@vger.kernel.org
Cc: alex.williamson@redhat.com, cohuck@redhat.com,
schnelle@linux.ibm.com, farman@linux.ibm.com,
pmorel@linux.ibm.com, borntraeger@linux.ibm.com,
hca@linux.ibm.com, gor@linux.ibm.com,
gerald.schaefer@linux.ibm.com, agordeev@linux.ibm.com,
frankja@linux.ibm.com, david@redhat.com, imbrenda@linux.ibm.com,
vneethv@linux.ibm.com, oberpar@linux.ibm.com,
freude@linux.ibm.com, thuth@redhat.com, pasic@linux.ibm.com,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 27/30] vfio-pci/zdev: wire up zPCI IOAT assist support
Date: Fri, 4 Feb 2022 16:15:33 -0500 [thread overview]
Message-ID: <20220204211536.321475-28-mjrosato@linux.ibm.com> (raw)
In-Reply-To: <20220204211536.321475-1-mjrosato@linux.ibm.com>
Introduce support for VFIO_DEVICE_FEATURE_ZPCI_IOAT, which is a new
VFIO_DEVICE_FEATURE ioctl. This interface is used to indicate that an
s390x vfio-pci device wishes to enable/disable zPCI I/O Address
Translation assistance, allowing the host to perform address translation
and shadowing.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
arch/s390/include/asm/kvm_pci.h | 1 +
drivers/vfio/pci/vfio_pci_core.c | 2 ++
drivers/vfio/pci/vfio_pci_zdev.c | 58 ++++++++++++++++++++++++++++++++
include/linux/vfio_pci_core.h | 10 ++++++
include/uapi/linux/vfio.h | 8 +++++
include/uapi/linux/vfio_zdev.h | 13 +++++++
6 files changed, 92 insertions(+)
diff --git a/arch/s390/include/asm/kvm_pci.h b/arch/s390/include/asm/kvm_pci.h
index 93b61e61dc7f..71d27863ab97 100644
--- a/arch/s390/include/asm/kvm_pci.h
+++ b/arch/s390/include/asm/kvm_pci.h
@@ -31,6 +31,7 @@ struct kvm_zdev {
struct zpci_dev *zdev;
struct kvm *kvm;
u64 rpcit_count;
+ u64 iota;
struct kvm_zdev_ioat ioat;
struct zpci_fib fib;
struct notifier_block nb;
diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index 01658de660bd..709d9ba22a60 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -1176,6 +1176,8 @@ long vfio_pci_core_ioctl(struct vfio_device *core_vdev, unsigned int cmd,
return vfio_pci_zdev_feat_interp(vdev, feature, arg);
case VFIO_DEVICE_FEATURE_ZPCI_AIF:
return vfio_pci_zdev_feat_aif(vdev, feature, arg);
+ case VFIO_DEVICE_FEATURE_ZPCI_IOAT:
+ return vfio_pci_zdev_feat_ioat(vdev, feature, arg);
default:
return -ENOTTY;
}
diff --git a/drivers/vfio/pci/vfio_pci_zdev.c b/drivers/vfio/pci/vfio_pci_zdev.c
index 74508bdc5f88..f0a6e0f0e4b0 100644
--- a/drivers/vfio/pci/vfio_pci_zdev.c
+++ b/drivers/vfio/pci/vfio_pci_zdev.c
@@ -292,6 +292,63 @@ int vfio_pci_zdev_feat_aif(struct vfio_pci_core_device *vdev,
return rc;
}
+int vfio_pci_zdev_feat_ioat(struct vfio_pci_core_device *vdev,
+ struct vfio_device_feature feature,
+ unsigned long arg)
+{
+ struct zpci_dev *zdev = to_zpci(vdev->pdev);
+ struct vfio_device_zpci_ioat *data;
+ struct vfio_device_feature *feat;
+ unsigned long minsz;
+ int size, rc = 0;
+
+ if (!zdev || !zdev->kzdev)
+ return -EINVAL;
+
+ /* If PROBE specified, return probe results immediately */
+ if (feature.flags & VFIO_DEVICE_FEATURE_PROBE)
+ return kvm_s390_pci_ioat_probe(zdev);
+
+ size = sizeof(*feat) + sizeof(*data);
+ feat = kzalloc(size, GFP_KERNEL);
+ if (!feat)
+ return -ENOMEM;
+
+ data = (struct vfio_device_zpci_ioat *)&feat->data;
+ minsz = offsetofend(struct vfio_device_feature, flags);
+
+ if (feature.argsz < minsz + sizeof(*data))
+ return -EINVAL;
+
+ /* Get the rest of the payload for GET/SET */
+ rc = copy_from_user(data, (void __user *)(arg + minsz),
+ sizeof(*data));
+ if (rc)
+ rc = -EINVAL;
+
+ if (feature.flags & VFIO_DEVICE_FEATURE_GET) {
+ data->iota = (u64)zdev->kzdev->iota;
+ if (copy_to_user((void __user *)arg, feat, size))
+ rc = -EFAULT;
+ } else if (feature.flags & VFIO_DEVICE_FEATURE_SET) {
+ if (data->iota != 0) {
+ rc = kvm_s390_pci_ioat_enable(zdev, data->iota);
+ if (!rc)
+ zdev->kzdev->iota = data->iota;
+ } else if (zdev->kzdev->iota != 0) {
+ rc = kvm_s390_pci_ioat_disable(zdev);
+ if (!rc)
+ zdev->kzdev->iota = 0;
+ }
+ } else {
+ /* Neither GET nor SET were specified */
+ rc = -EINVAL;
+ }
+
+ kfree(feat);
+ return rc;
+}
+
static int vfio_pci_zdev_group_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -341,6 +398,7 @@ void vfio_pci_zdev_release(struct vfio_pci_core_device *vdev)
*/
if (zdev->gisa != 0) {
kvm_s390_pci_aif_disable(zdev, true);
+ kvm_s390_pci_ioat_disable(zdev);
kvm_s390_pci_interp_disable(zdev, true);
}
diff --git a/include/linux/vfio_pci_core.h b/include/linux/vfio_pci_core.h
index 7ec5e82e7933..f17d761ae14e 100644
--- a/include/linux/vfio_pci_core.h
+++ b/include/linux/vfio_pci_core.h
@@ -204,6 +204,9 @@ int vfio_pci_zdev_feat_interp(struct vfio_pci_core_device *vdev,
int vfio_pci_zdev_feat_aif(struct vfio_pci_core_device *vdev,
struct vfio_device_feature feature,
unsigned long arg);
+int vfio_pci_zdev_feat_ioat(struct vfio_pci_core_device *vdev,
+ struct vfio_device_feature feature,
+ unsigned long arg);
void vfio_pci_zdev_open(struct vfio_pci_core_device *vdev);
void vfio_pci_zdev_release(struct vfio_pci_core_device *vdev);
#else
@@ -227,6 +230,13 @@ static inline int vfio_pci_zdev_feat_aif(struct vfio_pci_core_device *vdev,
return -ENOTTY;
}
+static inline int vfio_pci_zdev_feat_ioat(struct vfio_pci_core_device *vdev,
+ struct vfio_device_feature feature,
+ unsigned long arg)
+{
+ return -ENOTTY;
+}
+
static inline void vfio_pci_zdev_open(struct vfio_pci_core_device *vdev)
{
}
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index fe3bfd99bf50..32c687388f48 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -1016,6 +1016,14 @@ struct vfio_device_feature {
*/
#define VFIO_DEVICE_FEATURE_ZPCI_AIF (2)
+/*
+ * Provide support for enabling guest I/O address translation assistance for
+ * zPCI devices. This feature is only valid for s390x PCI devices. Data
+ * provided when setting and getting this feature is further described in
+ * vfio_zdev.h
+ */
+#define VFIO_DEVICE_FEATURE_ZPCI_IOAT (3)
+
/* -------- API for Type1 VFIO IOMMU -------- */
/**
diff --git a/include/uapi/linux/vfio_zdev.h b/include/uapi/linux/vfio_zdev.h
index 09f413dfb1c3..b77e6ef355cb 100644
--- a/include/uapi/linux/vfio_zdev.h
+++ b/include/uapi/linux/vfio_zdev.h
@@ -110,4 +110,17 @@ struct vfio_device_zpci_aif {
__u8 sbo; /* Offset of guest summary bit vector */
};
+/**
+ * VFIO_DEVICE_FEATURE_ZPCI_IOAT
+ *
+ * This feature is used for enabling guest I/O translation assistance for
+ * passthrough zPCI devices using instruction interpretation. When setting
+ * this feature, the iota specifies a KVM guest I/O translation anchor. When
+ * getting this feature, the most recently set anchor (or 0) is returned in
+ * iota.
+ */
+struct vfio_device_zpci_ioat {
+ __u64 iota;
+};
+
#endif
--
2.27.0
next prev parent reply other threads:[~2022-02-04 21:18 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-04 21:15 [PATCH v3 00/30] KVM: s390: enable zPCI for interpretive execution Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 01/30] s390/sclp: detect the zPCI load/store interpretation facility Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 02/30] s390/sclp: detect the AISII facility Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 03/30] s390/sclp: detect the AENI facility Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 04/30] s390/sclp: detect the AISI facility Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 05/30] s390/airq: pass more TPI info to airq handlers Matthew Rosato
2022-02-07 8:28 ` Cornelia Huck
2022-02-04 21:15 ` [PATCH v3 06/30] s390/airq: allow for airq structure that uses an input vector Matthew Rosato
2022-02-07 8:29 ` Cornelia Huck
2022-02-07 8:42 ` Claudio Imbrenda
2022-02-04 21:15 ` [PATCH v3 07/30] s390/pci: externalize the SIC operation controls and routine Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 08/30] s390/pci: stash associated GISA designation Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 09/30] s390/pci: export some routines related to RPCIT processing Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 10/30] s390/pci: stash dtsm and maxstbl Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 11/30] s390/pci: add helper function to find device by handle Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 12/30] s390/pci: get SHM information from list pci Matthew Rosato
2022-02-07 10:08 ` Pierre Morel
2022-02-04 21:15 ` [PATCH v3 13/30] s390/pci: return status from zpci_refresh_trans Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 14/30] vfio/pci: re-introduce CONFIG_VFIO_PCI_ZDEV Matthew Rosato
2022-02-07 8:35 ` Cornelia Huck
2022-02-07 15:43 ` Matthew Rosato
2022-02-07 17:59 ` Cornelia Huck
2022-02-07 20:09 ` Matthew Rosato
2022-02-10 10:07 ` Cornelia Huck
2022-02-04 21:15 ` [PATCH v3 15/30] KVM: s390: pci: add basic kvm_zdev structure Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 16/30] KVM: s390: pci: do initial setup for AEN interpretation Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 17/30] KVM: s390: pci: enable host forwarding of Adapter Event Notifications Matthew Rosato
2022-02-14 12:59 ` Pierre Morel
2022-02-14 20:35 ` Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 18/30] KVM: s390: mechanism to enable guest zPCI Interpretation Matthew Rosato
2022-02-14 13:06 ` Pierre Morel
2022-02-04 21:15 ` [PATCH v3 19/30] KVM: s390: pci: provide routines for enabling/disabling interpretation Matthew Rosato
2022-02-14 13:22 ` Pierre Morel
2022-02-04 21:15 ` [PATCH v3 20/30] KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 21/30] KVM: s390: pci: provide routines for enabling/disabling IOAT assist Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 22/30] KVM: s390: pci: handle refresh of PCI translations Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 23/30] KVM: s390: intercept the rpcit instruction Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 24/30] vfio-pci/zdev: wire up group notifier Matthew Rosato
2022-02-08 17:43 ` Alex Williamson
2022-02-08 18:51 ` Jason Gunthorpe
2022-02-08 19:26 ` Alex Williamson
2022-02-08 19:51 ` Jason Gunthorpe
2022-02-08 20:33 ` Matthew Rosato
2022-02-08 20:40 ` Jason Gunthorpe
2022-02-08 21:37 ` Matthew Rosato
2022-02-10 11:15 ` Niklas Schnelle
2022-02-10 13:01 ` Jason Gunthorpe
2022-02-10 14:06 ` Niklas Schnelle
2022-02-10 15:23 ` Jason Gunthorpe
2022-02-10 18:59 ` Matthew Rosato
2022-02-10 23:45 ` Jason Gunthorpe
2022-02-04 21:15 ` [PATCH v3 25/30] vfio-pci/zdev: wire up zPCI interpretive execution support Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 26/30] vfio-pci/zdev: wire up zPCI adapter interrupt forwarding support Matthew Rosato
2022-02-07 16:38 ` Pierre Morel
2022-02-04 21:15 ` Matthew Rosato [this message]
2022-02-04 21:15 ` [PATCH v3 28/30] vfio-pci/zdev: add DTSM to clp group capability Matthew Rosato
2022-02-04 21:15 ` [PATCH v3 29/30] KVM: s390: introduce CPU feature for zPCI Interpretation Matthew Rosato
2022-02-07 16:36 ` Pierre Morel
2022-02-04 21:15 ` [PATCH v3 30/30] MAINTAINERS: additional files related kvm s390 pci passthrough Matthew Rosato
2022-02-07 13:04 ` Christian Borntraeger
2022-02-07 15:44 ` Matthew Rosato
2022-02-04 21:33 ` [PATCH v3 00/30] KVM: s390: enable zPCI for interpretive execution Matthew Rosato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220204211536.321475-28-mjrosato@linux.ibm.com \
--to=mjrosato@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=alex.williamson@redhat.com \
--cc=borntraeger@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=farman@linux.ibm.com \
--cc=frankja@linux.ibm.com \
--cc=freude@linux.ibm.com \
--cc=gerald.schaefer@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=oberpar@linux.ibm.com \
--cc=pasic@linux.ibm.com \
--cc=pmorel@linux.ibm.com \
--cc=schnelle@linux.ibm.com \
--cc=thuth@redhat.com \
--cc=vneethv@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).