KVM Archive on lore.kernel.org
 help / color / Atom feed
From: Christian Borntraeger <borntraeger@de.ibm.com>
To: David Hildenbrand <david@redhat.com>
Cc: Ulrich.Weigand@de.ibm.com, cohuck@redhat.com,
	frankja@linux.ibm.com, frankja@linux.vnet.ibm.com,
	gor@linux.ibm.com, imbrenda@linux.ibm.com, kvm@vger.kernel.org,
	linux-s390@vger.kernel.org, mimu@linux.ibm.com, thuth@redhat.com
Subject: Re: [PATCH v2.1] KVM: s390: protvirt: Add initial vm and cpu lifecycle handling
Date: Wed, 19 Feb 2020 12:01:09 +0100
Message-ID: <4386caa5-6158-0f8b-cb9f-fd9ab3435910@de.ibm.com> (raw)
In-Reply-To: <42deaa19-d2ca-f1cc-3e83-af0d5d77347f@redhat.com>



On 18.02.20 10:12, David Hildenbrand wrote:
ock the VCPU, it cannot be running, right?
> 
>> +	kvm_for_each_vcpu(i, vcpu, kvm) {
>> +		mutex_lock(&vcpu->mutex);
>> +		r = kvm_s390_pv_destroy_cpu(vcpu, rc, rrc);
>> +		mutex_unlock(&vcpu->mutex);
>> +		if (r)
>> +			break;
>> +	}
> 
> Can this actually ever fail? 

Every reason for failure seems to be wrong usage by KVM. So it should not fail and if if does
we should probably warn. 

If so, you would leave half-initialized
> state around. Warn and continue?

So yes, maybe warn and try to continue to destroy the remaining CPUs.

> 
> Especially, kvm_arch_vcpu_destroy() ignores any error from
> kvm_s390_pv_destroy_cpu() as well ...
> 
> IMHO, we should make kvm_s390_switch_from_pv() and
> kvm_s390_pv_destroy_cpu() never fail.

ack.


  parent reply index

Thread overview: 132+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-14 22:26 [PATCH v2 00/42] KVM: s390: Add support for protected VMs Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 01/42] mm:gup/writeback: add callbacks for inaccessible pages Christian Borntraeger
2020-02-17  9:14   ` David Hildenbrand
2020-02-17 11:10     ` Christian Borntraeger
2020-02-18  8:27       ` David Hildenbrand
2020-02-18 15:46         ` Sean Christopherson
2020-02-18 16:02           ` Will Deacon
2020-02-18 16:15             ` Christian Borntraeger
2020-02-18 21:35               ` Sean Christopherson
2020-02-19  8:31                 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 02/42] KVM: s390/interrupt: do not pin adapter interrupt pages Christian Borntraeger
2020-02-17  9:43   ` David Hildenbrand
2020-02-20 12:18     ` David Hildenbrand
2020-02-20 13:31     ` Christian Borntraeger
2020-02-20 13:34       ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 03/42] s390/protvirt: introduce host side setup Christian Borntraeger
2020-02-17  9:53   ` David Hildenbrand
2020-02-17 11:11     ` Christian Borntraeger
2020-02-17 11:13       ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 04/42] s390/protvirt: add ultravisor initialization Christian Borntraeger
2020-02-17  9:57   ` David Hildenbrand
2020-02-17 11:13     ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 05/42] s390/mm: provide memory management functions for protected KVM guests Christian Borntraeger
2020-02-17 10:21   ` David Hildenbrand
2020-02-17 11:28     ` Christian Borntraeger
2020-02-17 12:07       ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 06/42] s390/mm: add (non)secure page access exceptions handlers Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 07/42] KVM: s390: protvirt: Add UV debug trace Christian Borntraeger
2020-02-17 10:41   ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 08/42] KVM: s390: add new variants of UV CALL Christian Borntraeger
2020-02-17 10:42   ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 09/42] KVM: s390: protvirt: Add initial vm and cpu lifecycle handling Christian Borntraeger
2020-02-17 10:56   ` David Hildenbrand
2020-02-17 12:04     ` Christian Borntraeger
2020-02-17 12:09       ` David Hildenbrand
2020-02-17 14:53         ` [PATCH 0/2] example changes Christian Borntraeger
2020-02-17 14:53           ` [PATCH 1/2] lock changes Christian Borntraeger
2020-02-17 14:53           ` [PATCH 2/2] merge vm/cpu create Christian Borntraeger
2020-02-17 15:00             ` Janosch Frank
2020-02-17 15:02               ` Christian Borntraeger
2020-02-19 11:02               ` Christian Borntraeger
2020-02-17 19:18           ` [PATCH 0/2] example changes David Hildenbrand
2020-02-18  8:09     ` [PATCH v2 09/42] KVM: s390: protvirt: Add initial vm and cpu lifecycle handling Christian Borntraeger
2020-02-18  8:39   ` [PATCH v2.1] " Christian Borntraeger
2020-02-18  9:12     ` David Hildenbrand
2020-02-18 21:18       ` Christian Borntraeger
2020-02-19  8:32         ` David Hildenbrand
2020-02-19 11:01       ` Christian Borntraeger [this message]
2020-02-18  9:56     ` David Hildenbrand
2020-02-18 20:26       ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 10/42] KVM: s390: protvirt: Add KVM api documentation Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 11/42] KVM: s390: protvirt: Secure memory is not mergeable Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 12/42] KVM: s390/mm: Make pages accessible before destroying the guest Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 13/42] KVM: s390: protvirt: Handle SE notification interceptions Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 14/42] KVM: s390: protvirt: Instruction emulation Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 15/42] KVM: s390: protvirt: Add interruption injection controls Christian Borntraeger
2020-02-17 10:59   ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 16/42] KVM: s390: protvirt: Implement interruption injection Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 17/42] KVM: s390: protvirt: Add SCLP interrupt handling Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 18/42] KVM: s390: protvirt: Handle spec exception loops Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 19/42] KVM: s390: protvirt: Add new gprs location handling Christian Borntraeger
2020-02-17 11:01   ` David Hildenbrand
2020-02-17 11:33     ` Christian Borntraeger
2020-02-17 14:37     ` Janosch Frank
2020-02-14 22:26 ` [PATCH v2 20/42] KVM: S390: protvirt: Introduce instruction data area bounce buffer Christian Borntraeger
2020-02-17 11:08   ` David Hildenbrand
2020-02-17 14:47     ` Janosch Frank
2020-02-17 15:00       ` Christian Borntraeger
2020-02-17 15:38         ` Janosch Frank
2020-02-17 16:58           ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 21/42] KVM: s390: protvirt: handle secure guest prefix pages Christian Borntraeger
2020-02-17 11:11   ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 22/42] KVM: s390/mm: handle guest unpin events Christian Borntraeger
2020-02-17 14:23   ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 23/42] KVM: s390: protvirt: Write sthyi data to instruction data area Christian Borntraeger
2020-02-17 14:24   ` David Hildenbrand
2020-02-17 18:40     ` Christian Borntraeger
2020-02-17 19:16       ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 24/42] KVM: s390: protvirt: STSI handling Christian Borntraeger
2020-02-18  8:35   ` David Hildenbrand
2020-02-18  8:44     ` Christian Borntraeger
2020-02-18  9:08       ` David Hildenbrand
2020-02-18  9:11         ` Christian Borntraeger
2020-02-18  9:13           ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 25/42] KVM: s390: protvirt: disallow one_reg Christian Borntraeger
2020-02-18  8:40   ` David Hildenbrand
2020-02-18  8:57     ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 26/42] KVM: s390: protvirt: Do only reset registers that are accessible Christian Borntraeger
2020-02-18  8:42   ` David Hildenbrand
2020-02-18  9:20     ` Christian Borntraeger
2020-02-18  9:28       ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 27/42] KVM: s390: protvirt: Only sync fmt4 registers Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 28/42] KVM: s390: protvirt: Add program exception injection Christian Borntraeger
2020-02-18  9:33   ` David Hildenbrand
2020-02-18  9:37     ` Christian Borntraeger
2020-02-18  9:39       ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 29/42] KVM: s390: protvirt: Add diag 308 subcode 8 - 10 handling Christian Borntraeger
2020-02-18  9:38   ` David Hildenbrand
2020-02-19 12:45     ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 30/42] KVM: s390: protvirt: UV calls in support of diag308 0, 1 Christian Borntraeger
2020-02-18  9:44   ` David Hildenbrand
2020-02-19 11:53     ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 31/42] KVM: s390: protvirt: Report CPU state to Ultravisor Christian Borntraeger
2020-02-18  9:48   ` David Hildenbrand
2020-02-19 19:36     ` Christian Borntraeger
2020-02-19 19:46       ` Christian Borntraeger
2020-02-20 10:52         ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 32/42] KVM: s390: protvirt: Support cmd 5 operation state Christian Borntraeger
2020-02-18  9:50   ` David Hildenbrand
2020-02-19 11:06     ` Christian Borntraeger
2020-02-19 11:08       ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 33/42] KVM: s390: protvirt: Mask PSW interrupt bits for interception 104 and 112 Christian Borntraeger
2020-02-18  9:53   ` David Hildenbrand
2020-02-18 10:02     ` David Hildenbrand
2020-02-18 10:05     ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 34/42] KVM: s390: protvirt: do not inject interrupts after start Christian Borntraeger
2020-02-18  9:53   ` David Hildenbrand
2020-02-18 10:02     ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 35/42] KVM: s390: protvirt: Add UV cpu reset calls Christian Borntraeger
2020-02-18  9:54   ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 36/42] DOCUMENTATION: Protected virtual machine introduction and IPL Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 37/42] s390/uv: Fix handling of length extensions (already in s390 tree) Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 38/42] s390: protvirt: Add sysfs firmware interface for Ultravisor information Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 39/42] example for future extension: mm:gup/writeback: add callbacks for inaccessible pages: error cases Christian Borntraeger
2020-02-18 16:25   ` Will Deacon
2020-02-18 16:30     ` Christian Borntraeger
2020-02-18 16:33       ` Will Deacon
2020-02-14 22:26 ` [PATCH v2 40/42] example for future extension: mm:gup/writeback: add callbacks for inaccessible pages: source indication Christian Borntraeger
2020-02-17 14:15   ` Ulrich Weigand
2020-02-17 14:38     ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 41/42] potential fixup for "s390/mm: provide memory management functions for protected KVM guests" Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 42/42] KVM: s390: rstify new ioctls in api.rst Christian Borntraeger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4386caa5-6158-0f8b-cb9f-fd9ab3435910@de.ibm.com \
    --to=borntraeger@de.ibm.com \
    --cc=Ulrich.Weigand@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=frankja@linux.ibm.com \
    --cc=frankja@linux.vnet.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=imbrenda@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=mimu@linux.ibm.com \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvm/0 kvm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvm kvm/ https://lore.kernel.org/kvm \
		kvm@vger.kernel.org
	public-inbox-index kvm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.kvm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git