kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zenghui Yu <yuzenghui@huawei.com>
To: Marc Zyngier <maz@kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<kvmarm@lists.cs.columbia.edu>, <kvm@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Robert Richter <rrichter@marvell.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	Eric Auger <eric.auger@redhat.com>,
	"James Morse" <james.morse@arm.com>,
	Julien Thierry <julien.thierry.kdev@gmail.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>
Subject: Re: [PATCH v4 08/20] irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
Date: Tue, 18 Feb 2020 15:00:54 +0800	[thread overview]
Message-ID: <4b7f71f1-5e7f-e6af-f47d-7ed0d3a8739f@huawei.com> (raw)
In-Reply-To: <20200214145736.18550-9-maz@kernel.org>

Hi Marc,

On 2020/2/14 22:57, Marc Zyngier wrote:
> To implement the get/set_irqchip_state callbacks (limited to the
> PENDING state), we have to use a particular set of hacks:
> 
> - Reading the pending state is done by using a pair of new redistributor
>    registers (GICR_VSGIR, GICR_VSGIPENDR), which allow the 16 interrupts
>    state to be retrieved.
> - Setting the pending state is done by generating it as we'd otherwise do
>    for a guest (writing to GITS_SGIR)
> - Clearing the pending state is done by emiting a VSGI command with the
>    "clear" bit set.
> 
> Signed-off-by: Marc Zyngier <maz@kernel.org>
> ---
>   drivers/irqchip/irq-gic-v3-its.c   | 56 ++++++++++++++++++++++++++++++
>   include/linux/irqchip/arm-gic-v3.h | 14 ++++++++
>   2 files changed, 70 insertions(+)
> 
> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
> index 1e448d9a16ea..a9753435c4ff 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -3915,11 +3915,67 @@ static int its_sgi_set_affinity(struct irq_data *d,
>   	return -EINVAL;
>   }
>   
> +static int its_sgi_set_irqchip_state(struct irq_data *d,
> +				     enum irqchip_irq_state which,
> +				     bool state)
> +{
> +	if (which != IRQCHIP_STATE_PENDING)
> +		return -EINVAL;
> +
> +	if (state) {
> +		struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
> +		struct its_node *its = find_4_1_its();
> +		u64 val;
> +
> +		val  = FIELD_PREP(GITS_SGIR_VPEID, vpe->vpe_id);
> +		val |= FIELD_PREP(GITS_SGIR_VINTID, d->hwirq);
> +		writeq_relaxed(val, its->sgir_base + GITS_SGIR - SZ_128K);
> +	} else {
> +		its_configure_sgi(d, true);
> +	}
> +
> +	return 0;
> +}
> +
> +static int its_sgi_get_irqchip_state(struct irq_data *d,
> +				     enum irqchip_irq_state which, bool *val)
> +{
> +	struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
> +	void __iomem *base = gic_data_rdist_cpu(vpe->col_idx)->rd_base + SZ_128K;

There might be a race on reading the 'vpe->col_idx' against a concurrent
vPE schedule (col_idx will be modified in its_vpe_set_affinity)? Will we
end up accessing the GICR_VSGI* registers of the old redistributor,
while the vPE is now resident on the new one? Or is it harmful?

The same question for direct_lpi_inv(), where 'vpe->col_idx' will be
used in irq_to_cpuid().

> +	u32 count = 1000000;	/* 1s! */
> +	u32 status;
> +
> +	if (which != IRQCHIP_STATE_PENDING)
> +		return -EINVAL;
> +
> +	writel_relaxed(vpe->vpe_id, base + GICR_VSGIR);
> +	do {
> +		status = readl_relaxed(base + GICR_VSGIPENDR);
> +		if (!(status & GICR_VSGIPENDR_BUSY))
> +			goto out;
> +
> +		count--;
> +		if (!count) {
> +			pr_err_ratelimited("Unable to get SGI status\n");
> +			goto out;
> +		}
> +		cpu_relax();
> +		udelay(1);
> +	} while(count);
> +
> +out:
> +	*val = !!(status & (1 << d->hwirq));
> +
> +	return 0;
> +}
> +
>   static struct irq_chip its_sgi_irq_chip = {
>   	.name			= "GICv4.1-sgi",
>   	.irq_mask		= its_sgi_mask_irq,
>   	.irq_unmask		= its_sgi_unmask_irq,
>   	.irq_set_affinity	= its_sgi_set_affinity,
> +	.irq_set_irqchip_state	= its_sgi_set_irqchip_state,
> +	.irq_get_irqchip_state	= its_sgi_get_irqchip_state,
>   };
>   
>   static int its_sgi_irq_domain_alloc(struct irq_domain *domain,
> diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
> index a89578884263..64da945486ac 100644
> --- a/include/linux/irqchip/arm-gic-v3.h
> +++ b/include/linux/irqchip/arm-gic-v3.h
> @@ -345,6 +345,15 @@
>   #define GICR_VPENDBASER_4_1_VGRP1EN	(1ULL << 58)
>   #define GICR_VPENDBASER_4_1_VPEID	GENMASK_ULL(15, 0)
>   
> +#define GICR_VSGIR			0x0080
> +
> +#define GICR_VSGIR_VPEID		GENMASK(15, 0)
> +
> +#define GICR_VSGIPENDR			0x0088
> +
> +#define GICR_VSGIPENDR_BUSY		(1U << 31)
> +#define GICR_VSGIPENDR_PENDING		GENMASK(15, 0)
> +
>   /*
>    * ITS registers, offsets from ITS_base
>    */
> @@ -368,6 +377,11 @@
>   
>   #define GITS_TRANSLATER			0x10040
>   
> +#define GITS_SGIR			0x20020
> +
> +#define GITS_SGIR_VPEID			GENMASK_ULL(47, 32)
> +#define GITS_SGIR_VINTID		GENMASK_ULL(7, 0)

The spec says vINTID field is [3:0] of the GITS_SGIR.


Thanks,
Zenghui

> +
>   #define GITS_CTLR_ENABLE		(1U << 0)
>   #define GITS_CTLR_ImDe			(1U << 1)
>   #define	GITS_CTLR_ITS_NUMBER_SHIFT	4
> 


  reply	other threads:[~2020-02-18  7:01 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-14 14:57 [PATCH v4 00/20] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 01/20] irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributors Marc Zyngier
2020-02-17  9:11   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 02/20] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2020-02-17  9:18   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 03/20] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2020-02-17  9:09   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 04/20] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2020-02-20  3:17   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 05/20] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2020-02-20  3:21   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 06/20] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2020-02-18  7:25   ` Zenghui Yu
2020-02-18  9:46     ` Marc Zyngier
2020-02-20  3:25       ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 07/20] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2020-02-20  3:32   ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 08/20] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2020-02-18  7:00   ` Zenghui Yu [this message]
2020-02-18  9:27     ` Marc Zyngier
2020-02-18 15:31       ` Marc Zyngier
2020-02-19 11:50         ` Zenghui Yu
2020-02-19 15:18           ` Zenghui Yu
2020-02-20  3:11         ` Zenghui Yu
2020-02-28 19:37           ` Marc Zyngier
2020-03-01 19:00             ` Marc Zyngier
2020-03-02  8:18               ` Zenghui Yu
2020-03-02 12:09                 ` Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 09/20] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2020-02-20  3:37   ` Zenghui Yu
2020-02-28 19:00     ` Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 10/20] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 11/20] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 12/20] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 13/20] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 14/20] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 15/20] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2020-02-18  8:46   ` Zenghui Yu
2020-02-18  9:41     ` Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 16/20] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-02-20  3:55   ` Zenghui Yu
2020-02-28 19:16     ` Marc Zyngier
2020-03-02  2:40       ` Zenghui Yu
2020-02-14 14:57 ` [PATCH v4 17/20] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 18/20] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 19/20] KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs Marc Zyngier
2020-02-14 14:57 ` [PATCH v4 20/20] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4b7f71f1-5e7f-e6af-f47d-7ed0d3a8739f@huawei.com \
    --to=yuzenghui@huawei.com \
    --cc=eric.auger@redhat.com \
    --cc=james.morse@arm.com \
    --cc=jason@lakedaemon.net \
    --cc=julien.thierry.kdev@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=rrichter@marvell.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).