kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gavin Shan <gshan@redhat.com>
To: Keqian Zhu <zhukeqian1@huawei.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org,
	kvmarm@lists.cs.columbia.edu, Marc Zyngier <maz@kernel.org>
Cc: wanghaibin.wang@huawei.com
Subject: Re: [PATCH v4 2/2] kvm/arm64: Try stage2 block mapping for host device MMIO
Date: Wed, 21 Apr 2021 17:52:58 +1000	[thread overview]
Message-ID: <960e097d-818b-00bc-b2ee-0da17857f862@redhat.com> (raw)
In-Reply-To: <20210415140328.24200-3-zhukeqian1@huawei.com>

Hi Keqian,

On 4/16/21 12:03 AM, Keqian Zhu wrote:
> The MMIO region of a device maybe huge (GB level), try to use
> block mapping in stage2 to speedup both map and unmap.
> 
> Compared to normal memory mapping, we should consider two more
> points when try block mapping for MMIO region:
> 
> 1. For normal memory mapping, the PA(host physical address) and
> HVA have same alignment within PUD_SIZE or PMD_SIZE when we use
> the HVA to request hugepage, so we don't need to consider PA
> alignment when verifing block mapping. But for device memory
> mapping, the PA and HVA may have different alignment.
> 
> 2. For normal memory mapping, we are sure hugepage size properly
> fit into vma, so we don't check whether the mapping size exceeds
> the boundary of vma. But for device memory mapping, we should pay
> attention to this.
> 
> This adds get_vma_page_shift() to get page shift for both normal
> memory and device MMIO region, and check these two points when
> selecting block mapping size for MMIO region.
> 
> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
> ---
>   arch/arm64/kvm/mmu.c | 61 ++++++++++++++++++++++++++++++++++++--------
>   1 file changed, 51 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
> index c59af5ca01b0..5a1cc7751e6d 100644
> --- a/arch/arm64/kvm/mmu.c
> +++ b/arch/arm64/kvm/mmu.c
> @@ -738,6 +738,35 @@ transparent_hugepage_adjust(struct kvm_memory_slot *memslot,
>   	return PAGE_SIZE;
>   }
>   
> +static int get_vma_page_shift(struct vm_area_struct *vma, unsigned long hva)
> +{
> +	unsigned long pa;
> +
> +	if (is_vm_hugetlb_page(vma) && !(vma->vm_flags & VM_PFNMAP))
> +		return huge_page_shift(hstate_vma(vma));
> +
> +	if (!(vma->vm_flags & VM_PFNMAP))
> +		return PAGE_SHIFT;
> +
> +	VM_BUG_ON(is_vm_hugetlb_page(vma));
> +

I don't understand how VM_PFNMAP is set for hugetlbfs related vma.
I think they are exclusive, meaning the flag is never set for
hugetlbfs vma. If it's true, VM_PFNMAP needn't be checked on hugetlbfs
vma and the VM_BUG_ON() becomes unnecessary.

> +	pa = (vma->vm_pgoff << PAGE_SHIFT) + (hva - vma->vm_start);
> +
> +#ifndef __PAGETABLE_PMD_FOLDED
> +	if ((hva & (PUD_SIZE - 1)) == (pa & (PUD_SIZE - 1)) &&
> +	    ALIGN_DOWN(hva, PUD_SIZE) >= vma->vm_start &&
> +	    ALIGN(hva, PUD_SIZE) <= vma->vm_end)
> +		return PUD_SHIFT;
> +#endif
> +
> +	if ((hva & (PMD_SIZE - 1)) == (pa & (PMD_SIZE - 1)) &&
> +	    ALIGN_DOWN(hva, PMD_SIZE) >= vma->vm_start &&
> +	    ALIGN(hva, PMD_SIZE) <= vma->vm_end)
> +		return PMD_SHIFT;
> +
> +	return PAGE_SHIFT;
> +}
> +

There is "switch(...)" fallback mechanism in user_mem_abort(). PUD_SIZE/PMD_SIZE
can be downgraded accordingly if the addresses fails in the alignment check
by fault_supports_stage2_huge_mapping(). I think it would make user_mem_abort()
simplified if the logic can be moved to get_vma_page_shift().

Another question if we need the check from fault_supports_stage2_huge_mapping()
if VM_PFNMAP area is going to be covered by block mapping. If so, the "switch(...)"
fallback mechanism needs to be part of get_vma_page_shift().

>   static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>   			  struct kvm_memory_slot *memslot, unsigned long hva,
>   			  unsigned long fault_status)
> @@ -769,7 +798,10 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>   		return -EFAULT;
>   	}
>   
> -	/* Let's check if we will get back a huge page backed by hugetlbfs */
> +	/*
> +	 * Let's check if we will get back a huge page backed by hugetlbfs, or
> +	 * get block mapping for device MMIO region.
> +	 */
>   	mmap_read_lock(current->mm);
>   	vma = find_vma_intersection(current->mm, hva, hva + 1);
>   	if (unlikely(!vma)) {
> @@ -778,15 +810,15 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>   		return -EFAULT;
>   	}
>   
> -	if (is_vm_hugetlb_page(vma))
> -		vma_shift = huge_page_shift(hstate_vma(vma));
> -	else
> -		vma_shift = PAGE_SHIFT;
> -
> -	if (logging_active ||
> -	    (vma->vm_flags & VM_PFNMAP)) {
> +	/*
> +	 * logging_active is guaranteed to never be true for VM_PFNMAP
> +	 * memslots.
> +	 */
> +	if (logging_active) {
>   		force_pte = true;
>   		vma_shift = PAGE_SHIFT;
> +	} else {
> +		vma_shift = get_vma_page_shift(vma, hva);
>   	}
>   
>   	switch (vma_shift) {
> @@ -854,8 +886,17 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>   		return -EFAULT;
>   
>   	if (kvm_is_device_pfn(pfn)) {
> +		/*
> +		 * If the page was identified as device early by looking at
> +		 * the VMA flags, vma_pagesize is already representing the
> +		 * largest quantity we can map.  If instead it was mapped
> +		 * via gfn_to_pfn_prot(), vma_pagesize is set to PAGE_SIZE
> +		 * and must not be upgraded.
> +		 *
> +		 * In both cases, we don't let transparent_hugepage_adjust()
> +		 * change things at the last minute.
> +		 */
>   		device = true;
> -		force_pte = true;
>   	} else if (logging_active && !write_fault) {
>   		/*
>   		 * Only actually map the page as writable if this was a write
> @@ -876,7 +917,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>   	 * If we are not forced to use page mapping, check if we are
>   	 * backed by a THP and thus use block mapping if possible.
>   	 */
> -	if (vma_pagesize == PAGE_SIZE && !force_pte)
> +	if (vma_pagesize == PAGE_SIZE && !(force_pte || device))
>   		vma_pagesize = transparent_hugepage_adjust(memslot, hva,
>   							   &pfn, &fault_ipa);
>   	if (writable)
> 

Thanks,
Gavin


  parent reply	other threads:[~2021-04-21  5:53 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-15 14:03 [PATCH v4 0/2] kvm/arm64: Try stage2 block mapping for host device MMIO Keqian Zhu
2021-04-15 14:03 ` [PATCH v4 1/2] kvm/arm64: Remove the creation time's mapping of MMIO regions Keqian Zhu
2021-04-21  6:38   ` Gavin Shan
2021-04-21  6:28     ` Keqian Zhu
2021-04-22  2:12       ` Gavin Shan
2021-04-22  7:41         ` Keqian Zhu
2021-04-23  1:35           ` Gavin Shan
2021-04-23  1:36             ` Keqian Zhu
2021-04-23  0:36   ` Gavin Shan
2021-04-15 14:03 ` [PATCH v4 2/2] kvm/arm64: Try stage2 block mapping for host device MMIO Keqian Zhu
2021-04-15 14:08   ` Keqian Zhu
2021-04-16 14:44     ` Marc Zyngier
2021-04-17  1:05       ` Keqian Zhu
2021-04-21  7:52   ` Gavin Shan [this message]
2021-04-21  6:36     ` Keqian Zhu
2021-04-22  2:25       ` Gavin Shan
2021-04-22  6:51         ` Marc Zyngier
2021-04-23  0:42           ` Gavin Shan
2021-04-23  0:37   ` Gavin Shan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=960e097d-818b-00bc-b2ee-0da17857f862@redhat.com \
    --to=gshan@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=wanghaibin.wang@huawei.com \
    --cc=zhukeqian1@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).