kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "SourceForge.net" <noreply@sourceforge.net>
To: noreply@sourceforge.net
Subject: [ kvm-Bugs-2729621 ] usb_add on garmin gps fails
Date: Sat, 04 Apr 2009 03:08:08 +0000	[thread overview]
Message-ID: <E1LpwEq-0005H1-Qz@3bkjzd1.ch3.sourceforge.com> (raw)

Bugs item #2729621, was opened at 2009-04-03 21:02
Message generated for change (Comment added) made by byron_clark
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: qemu
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Byron Clark (byron_clark)
Assigned to: Nobody/Anonymous (nobody)
Summary: usb_add on garmin gps fails

Initial Comment:
When I attempt to usb_add my Garmin Venture HC GPS with this command:
usb_add host:091e:0003

I get the following error:
usb_linux_update_endp_table: Broken pipe

strace log:
write(1, "husb: open device 5.3\n", 22) = 22
open("/proc/bus/usb/005/003", O_RDWR|O_NONBLOCK) = 26
read(26, "\22\1\20\1\377\377\377@\36\t\3\0\1\0\0\0\0\1\t\2'\0\1\1\0\300\0\t\4\0\0\3"..., 1024) = 57
write(1, "husb: config #1 need -1\n", 24) = 24
ioctl(26, USBDEVFS_IOCTL, 0x7fff0bb74300) = -1 ENODATA (No data available)
ioctl(26, USBDEVFS_CLAIMINTERFACE, 0x7fff0bb7431c) = 0
write(1, "husb: 1 interfaces claimed for c"..., 47) = 47
ioctl(26, USBDEVFS_CONNECTINFO, 0x7fff0bb74750) = 0
write(1, "husb: grabbed usb device 5.3\n", 29) = 29
ioctl(26, USBDEVFS_CONTROL, 0x7fff0bb742f0) = -1 EPIPE (Broken pipe)
dup(2)                                  = 27
fcntl(27, F_GETFL)                      = 0x8802 (flags O_RDWR|O_NONBLOCK|O_LARGEFILE)
fstat(27, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4e03b67000
lseek(27, 0, SEEK_CUR)                  = -1 ESPIPE (Illegal seek)
write(27, "usb_linux_update_endp_table: Bro"..., 41) = 41
close(27)                               = 0

cpu: 
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz
stepping        : 11
cpu MHz         : 2194.427
cache size      : 4096 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority
bogomips        : 4388.85
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

host distribution: debian sid
bitness: 64

guest distribution: windows xp
bitness: 32

----------------------------------------------------------------------

>Comment By: Byron Clark (byron_clark)
Date: 2009-04-03 21:08

Message:
kvm-84, kernel 2.6.29.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599

             reply	other threads:[~2009-04-04  3:08 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-04  3:08 SourceForge.net [this message]
  -- strict thread matches above, loose matches on Subject: below --
2011-03-03 11:39 [ kvm-Bugs-2729621 ] usb_add on garmin gps fails SourceForge.net
2009-12-03 19:18 SourceForge.net
2009-12-03 19:05 SourceForge.net
2009-04-04  3:02 SourceForge.net

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1LpwEq-0005H1-Qz@3bkjzd1.ch3.sourceforge.com \
    --to=noreply@sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).