kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christian Borntraeger <borntraeger@de.ibm.com>
To: Collin Walling <walling@linux.ibm.com>,
	kvm@vger.kernel.org, linux-s390@vger.kernel.org
Cc: pbonzini@redhat.com, frankja@linux.ibm.com, david@redhat.com,
	cohuck@redhat.com, imbrenda@linux.ibm.com,
	heiko.carstens@de.ibm.com, gor@linux.ibm.com, thuth@redhat.com
Subject: Re: [PATCH v7 3/3] s390/kvm: diagnose 0x318 get/set handling
Date: Mon, 18 May 2020 11:15:00 +0200	[thread overview]
Message-ID: <b08dbb8a-76fd-3693-d470-6171074ffce4@de.ibm.com> (raw)
In-Reply-To: <20200515221935.18775-4-walling@linux.ibm.com>



On 16.05.20 00:19, Collin Walling wrote:
> DIAGNOSE 0x318 (diag 318) sets information regarding the environment
> the VM is running in (Linux, z/VM, etc) and is observed via
> firmware/service events.
> 
> This is a privileged s390x instruction that must be intercepted by
> SIE. Userspace handling is required, so let's introduce some functions
> to communicate between userspace and KVM via ioctls. These will be used
> to get/set the diag 318 related information.
> 
> The Control Program Name Code (CPNC) is stored in the SIE block. The
> CPNC along with the Control Program Version Code (CPVC) are stored in
> the kvm_arch struct.
> 
> Signed-off-by: Collin Walling <walling@linux.ibm.com>
> ---
>  Documentation/virt/kvm/devices/vm.rst | 21 +++++++
>  arch/s390/include/asm/kvm_host.h      |  5 +-
>  arch/s390/include/uapi/asm/kvm.h      |  4 ++
>  arch/s390/kvm/kvm-s390.c              | 82 +++++++++++++++++++++++++++
>  arch/s390/kvm/vsie.c                  |  2 +
>  5 files changed, 113 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/virt/kvm/devices/vm.rst b/Documentation/virt/kvm/devices/vm.rst
> index 0aa5b1cfd700..52cc906dd7bd 100644
> --- a/Documentation/virt/kvm/devices/vm.rst
> +++ b/Documentation/virt/kvm/devices/vm.rst
> @@ -314,3 +314,24 @@ Allows userspace to query the status of migration mode.
>  	     if it is enabled
>  :Returns:   -EFAULT if the given address is not accessible from kernel space;
>  	    0 in case of success.
> +
> +6. GROUP: KVM_S390_VM_MISC
> +==========================
> +
> +:Architectures: s390
> +
> +6.1. KVM_S390_VM_MISC_DIAG_318 (r/w)
> +-----------------------------------
> +
> +Allows userspace to retrieve and set the DIAGNOSE 0x318 information,
> +which consists of a 1-byte "Control Program Name Code" and a 7-byte
> +"Control Program Version Code" (a 64 bit value all in all). This
> +information is set by the guest (usually during IPL). This interface is
> +intended to allow retrieving and setting it during migration; while no
> +real harm is done if the information is changed outside of migration,
> +it is strongly discouraged.
> +
> +:Parameters: address of a buffer in user space (u64), where the
> +	     information is read from or stored into
> +:Returns:    -EFAULT if the given address is not accessible from kernel space;
> +	     0 in case of success


An alternative would be a new sync_reg value + KVM capability.



  reply	other threads:[~2020-05-18  9:15 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-15 22:19 [PATCH v7 0/3] Use DIAG318 to set Control Program Name & Version Codes Collin Walling
2020-05-15 22:19 ` [PATCH v7 1/3] s390/setup: diag 318: refactor struct Collin Walling
2020-05-15 22:19 ` [PATCH v7 2/3] s390: keep diag 318 variables consistent with the rest Collin Walling
2020-05-18  6:30   ` Thomas Huth
2020-05-18 14:46     ` Collin Walling
2020-05-15 22:19 ` [PATCH v7 3/3] s390/kvm: diagnose 0x318 get/set handling Collin Walling
2020-05-18  9:15   ` Christian Borntraeger [this message]
2020-05-21  6:15     ` Collin Walling
2020-06-15 10:55       ` Christian Borntraeger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b08dbb8a-76fd-3693-d470-6171074ffce4@de.ibm.com \
    --to=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=frankja@linux.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=heiko.carstens@de.ibm.com \
    --cc=imbrenda@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=thuth@redhat.com \
    --cc=walling@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).