kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFC v3 00/11] Introduce VDUSE - vDPA Device in Userspace
@ 2021-01-19  4:59 Xie Yongji
  2021-01-19  4:59 ` [RFC v3 01/11] eventfd: track eventfd_signal() recursion depth separately in different cases Xie Yongji
                   ` (6 more replies)
  0 siblings, 7 replies; 57+ messages in thread
From: Xie Yongji @ 2021-01-19  4:59 UTC (permalink / raw)
  To: mst, jasowang, stefanha, sgarzare, parav, bob.liu, hch, rdunlap,
	willy, viro, axboe, bcrl, corbet
  Cc: virtualization, netdev, kvm, linux-aio, linux-fsdevel

This series introduces a framework, which can be used to implement
vDPA Devices in a userspace program. The work consist of two parts:
control path forwarding and data path offloading.

In the control path, the VDUSE driver will make use of message
mechnism to forward the config operation from vdpa bus driver
to userspace. Userspace can use read()/write() to receive/reply
those control messages.

In the data path, the core is mapping dma buffer into VDUSE
daemon's address space, which can be implemented in different ways
depending on the vdpa bus to which the vDPA device is attached.

In virtio-vdpa case, we implements a MMU-based on-chip IOMMU driver with
bounce-buffering mechanism to achieve that. And in vhost-vdpa case, the dma
buffer is reside in a userspace memory region which can be shared to the
VDUSE userspace processs via transferring the shmfd.

The details and our user case is shown below:

------------------------    -------------------------   ----------------------------------------------
|            Container |    |              QEMU(VM) |   |                               VDUSE daemon |
|       ---------      |    |  -------------------  |   | ------------------------- ---------------- |
|       |dev/vdx|      |    |  |/dev/vhost-vdpa-x|  |   | | vDPA device emulation | | block driver | |
------------+-----------     -----------+------------   -------------+----------------------+---------
            |                           |                            |                      |
            |                           |                            |                      |
------------+---------------------------+----------------------------+----------------------+---------
|    | block device |           |  vhost device |            | vduse driver |          | TCP/IP |    |
|    -------+--------           --------+--------            -------+--------          -----+----    |
|           |                           |                           |                       |        |
| ----------+----------       ----------+-----------         -------+-------                |        |
| | virtio-blk driver |       |  vhost-vdpa driver |         | vdpa device |                |        |
| ----------+----------       ----------+-----------         -------+-------                |        |
|           |      virtio bus           |                           |                       |        |
|   --------+----+-----------           |                           |                       |        |
|                |                      |                           |                       |        |
|      ----------+----------            |                           |                       |        |
|      | virtio-blk device |            |                           |                       |        |
|      ----------+----------            |                           |                       |        |
|                |                      |                           |                       |        |
|     -----------+-----------           |                           |                       |        |
|     |  virtio-vdpa driver |           |                           |                       |        |
|     -----------+-----------           |                           |                       |        |
|                |                      |                           |    vdpa bus           |        |
|     -----------+----------------------+---------------------------+------------           |        |
|                                                                                        ---+---     |
-----------------------------------------------------------------------------------------| NIC |------
                                                                                         ---+---
                                                                                            |
                                                                                   ---------+---------
                                                                                   | Remote Storages |
                                                                                   -------------------

We make use of it to implement a block device connecting to
our distributed storage, which can be used both in containers and
VMs. Thus, we can have an unified technology stack in this two cases.

To test it with null-blk:

  $ qemu-storage-daemon \
      --chardev socket,id=charmonitor,path=/tmp/qmp.sock,server,nowait \
      --monitor chardev=charmonitor \
      --blockdev driver=host_device,cache.direct=on,aio=native,filename=/dev/nullb0,node-name=disk0 \
      --export vduse-blk,id=test,node-name=disk0,writable=on,vduse-id=1,num-queues=16,queue-size=128

The qemu-storage-daemon can be found at https://github.com/bytedance/qemu/tree/vduse

Future work:
  - Improve performance (e.g. zero copy implementation in datapath)
  - Config interrupt support
  - Userspace library (find a way to reuse device emulation code in qemu/rust-vmm)

This is now based on below series:
https://lore.kernel.org/netdev/20201112064005.349268-1-parav@nvidia.com/

V2 to V3:
- Rework the MMU-based IOMMU driver
- Use the iova domain as iova allocator instead of genpool
- Support transferring vma->vm_file in vhost-vdpa
- Add SVA support in vhost-vdpa
- Remove the patches on bounce pages reclaim

V1 to V2:
- Add vhost-vdpa support
- Add some documents
- Based on the vdpa management tool
- Introduce a workqueue for irq injection
- Replace interval tree with array map to store the iova_map

Xie Yongji (11):
  eventfd: track eventfd_signal() recursion depth separately in different cases
  eventfd: Increase the recursion depth of eventfd_signal()
  vdpa: Remove the restriction that only supports virtio-net devices
  vhost-vdpa: protect concurrent access to vhost device iotlb
  vdpa: shared virtual addressing support
  vhost-vdpa: Add an opaque pointer for vhost IOTLB
  vdpa: Pass the netlink attributes to ops.dev_add()
  vduse: Introduce VDUSE - vDPA Device in Userspace
  vduse: Add VDUSE_GET_DEV ioctl
  vduse: grab the module's references until there is no vduse device
  vduse: Introduce a workqueue for irq injection

 Documentation/driver-api/vduse.rst                 |   85 ++
 Documentation/userspace-api/ioctl/ioctl-number.rst |    1 +
 drivers/vdpa/Kconfig                               |    7 +
 drivers/vdpa/Makefile                              |    1 +
 drivers/vdpa/ifcvf/ifcvf_main.c                    |    2 +-
 drivers/vdpa/mlx5/net/mlx5_vnet.c                  |    2 +-
 drivers/vdpa/vdpa.c                                |    7 +-
 drivers/vdpa/vdpa_sim/vdpa_sim.c                   |   17 +-
 drivers/vdpa/vdpa_user/Makefile                    |    5 +
 drivers/vdpa/vdpa_user/eventfd.c                   |  229 ++++
 drivers/vdpa/vdpa_user/eventfd.h                   |   48 +
 drivers/vdpa/vdpa_user/iova_domain.c               |  426 +++++++
 drivers/vdpa/vdpa_user/iova_domain.h               |   68 ++
 drivers/vdpa/vdpa_user/vduse.h                     |   62 +
 drivers/vdpa/vdpa_user/vduse_dev.c                 | 1249 ++++++++++++++++++++
 drivers/vhost/iotlb.c                              |    5 +-
 drivers/vhost/vdpa.c                               |  130 +-
 drivers/vhost/vhost.c                              |    4 +-
 fs/aio.c                                           |    3 +-
 fs/eventfd.c                                       |   20 +-
 include/linux/eventfd.h                            |    5 +-
 include/linux/vdpa.h                               |   17 +-
 include/linux/vhost_iotlb.h                        |    8 +-
 include/uapi/linux/vdpa.h                          |    1 +
 include/uapi/linux/vduse.h                         |  126 ++
 25 files changed, 2458 insertions(+), 70 deletions(-)
 create mode 100644 Documentation/driver-api/vduse.rst
 create mode 100644 drivers/vdpa/vdpa_user/Makefile
 create mode 100644 drivers/vdpa/vdpa_user/eventfd.c
 create mode 100644 drivers/vdpa/vdpa_user/eventfd.h
 create mode 100644 drivers/vdpa/vdpa_user/iova_domain.c
 create mode 100644 drivers/vdpa/vdpa_user/iova_domain.h
 create mode 100644 drivers/vdpa/vdpa_user/vduse.h
 create mode 100644 drivers/vdpa/vdpa_user/vduse_dev.c
 create mode 100644 include/uapi/linux/vduse.h

-- 
2.11.0


^ permalink raw reply	[flat|nested] 57+ messages in thread

end of thread, other threads:[~2021-02-01 11:07 UTC | newest]

Thread overview: 57+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-19  4:59 [RFC v3 00/11] Introduce VDUSE - vDPA Device in Userspace Xie Yongji
2021-01-19  4:59 ` [RFC v3 01/11] eventfd: track eventfd_signal() recursion depth separately in different cases Xie Yongji
2021-01-20  4:24   ` Jason Wang
2021-01-20  6:52     ` Yongji Xie
2021-01-27  3:37       ` Jason Wang
2021-01-27  9:11         ` Yongji Xie
2021-01-28  3:04           ` Jason Wang
2021-01-28  3:08             ` Jens Axboe
2021-01-28  5:12               ` Yongji Xie
2021-01-28  3:52             ` Yongji Xie
2021-01-28  4:31               ` Jason Wang
2021-01-28  6:08                 ` Yongji Xie
2021-01-19  4:59 ` [RFC v3 02/11] eventfd: Increase the recursion depth of eventfd_signal() Xie Yongji
2021-01-19  4:59 ` [RFC v3 03/11] vdpa: Remove the restriction that only supports virtio-net devices Xie Yongji
2021-01-20  3:46   ` Jason Wang
2021-01-20  6:46     ` Yongji Xie
2021-01-20 11:08     ` Stefano Garzarella
2021-01-27  3:33       ` Jason Wang
2021-01-27  8:57         ` Stefano Garzarella
2021-01-28  3:11           ` Jason Wang
     [not found]             ` <20210129150359.caitcskrfhqed73z@steredhat>
2021-01-30 11:33               ` Yongji Xie
2021-02-01 11:05                 ` Stefano Garzarella
2021-01-27  8:59   ` Stefano Garzarella
2021-01-27  9:05     ` Yongji Xie
2021-01-19  4:59 ` [RFC v3 04/11] vhost-vdpa: protect concurrent access to vhost device iotlb Xie Yongji
2021-01-20  3:44   ` Jason Wang
2021-01-20  6:44     ` Yongji Xie
2021-01-19  4:59 ` [RFC v3 05/11] vdpa: shared virtual addressing support Xie Yongji
2021-01-20  5:55   ` Jason Wang
2021-01-20  7:10     ` Yongji Xie
2021-01-27  3:43       ` Jason Wang
2021-01-19  4:59 ` [RFC v3 06/11] vhost-vdpa: Add an opaque pointer for vhost IOTLB Xie Yongji
2021-01-20  6:24   ` Jason Wang
2021-01-20  7:52     ` Yongji Xie
2021-01-27  3:51       ` Jason Wang
2021-01-27  9:27         ` Yongji Xie
2021-01-19  5:07 ` [RFC v3 07/11] vdpa: Pass the netlink attributes to ops.dev_add() Xie Yongji
2021-01-19  5:07   ` [RFC v3 08/11] vduse: Introduce VDUSE - vDPA Device in Userspace Xie Yongji
2021-01-19 14:53     ` Jonathan Corbet
2021-01-20  2:25       ` Yongji Xie
2021-01-19 17:53     ` Randy Dunlap
2021-01-20  2:42       ` Yongji Xie
2021-01-26  8:08     ` Jason Wang
2021-01-27  8:50       ` Yongji Xie
2021-01-28  4:27         ` Jason Wang
2021-01-28  6:03           ` Yongji Xie
2021-01-28  6:14             ` Jason Wang
2021-01-28  6:43               ` Yongji Xie
2021-01-26  8:19     ` Jason Wang
2021-01-27  8:59       ` Yongji Xie
2021-01-19  5:07   ` [RFC v3 09/11] vduse: Add VDUSE_GET_DEV ioctl Xie Yongji
2021-01-19  5:07   ` [RFC v3 10/11] vduse: grab the module's references until there is no vduse device Xie Yongji
2021-01-26  8:09     ` Jason Wang
2021-01-27  8:51       ` Yongji Xie
2021-01-19  5:07   ` [RFC v3 11/11] vduse: Introduce a workqueue for irq injection Xie Yongji
2021-01-26  8:17     ` Jason Wang
2021-01-27  9:00       ` Yongji Xie

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).