[Bug 207707] New: USB pass through to qemu/kvm causes CDROM reset and "device not configured"

[Bug 207707] New: USB pass through to qemu/kvm causes CDROM reset and "device not configured"

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=207707

            Bug ID: 207707
           Summary: USB pass through to qemu/kvm causes CDROM reset and
                    "device not configured"
           Product: Virtualization
           Version: unspecified
    Kernel Version: 4.19.121
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: kvm
          Assignee: virtualization_kvm@kernel-bugs.osdl.org
          Reporter: steffen@sdaoden.eu
        Regression: No

Hello.
I update my 4.19 kernel each Saturday.
In March i wrote a C program that accesses CDDA data (toc, CD-TEXT, etc), and
ported it to *BSD via qemu/kvm via USB pass through (i could).  I updated the
binary (s-cdda) last on March 16th.

Now, two weeks ago i wanted to pass through the USB CD-ROM again, and it did
not work no more with error as below.  This was directly after updating to qemu
5.0.0, so i reinstalled 4.2.0, with which i did the above, but it did no longer
work, too.
This is CRUX-Linux 3.5, and libusb has not changed. The only thing that really
changed otherwise is the kernel, i would say.

I used this USB CD-ROM:

May 11 22:25:32 kent kernel: usb 1-1: new high-speed USB device number 5 using
xhci_hcd
May 11 22:25:32 kent kernel: usb 1-1: New USB device found, idVendor=0e8d,
idProduct=1806, bcdDevice= 0.00
May 11 22:25:32 kent kernel: usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
May 11 22:25:32 kent kernel: usb 1-1: Product: MT1887
May 11 22:25:32 kent kernel: usb 1-1: Manufacturer: MediaTek Inc
May 11 22:25:32 kent kernel: usb 1-1: SerialNumber: S16D6YMG2003AB
May 11 22:25:32 kent kernel: usb-storage 1-1:1.0: USB Mass Storage device
detected
May 11 22:25:32 kent kernel: scsi host0: usb-storage 1-1:1.0
May 11 22:25:33 kent kernel: scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW
SE-218GN  TS00 PQ: 0 ANSI: 0
May 11 22:25:33 kent kernel: sr 0:0:0:0: Power-on or device reset occurred
May 11 22:25:33 kent kernel: sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
dvd-ram cd/rw xa/form2 cdda tray
May 11 22:25:33 kent kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
May 11 22:25:33 kent kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0
May 11 22:25:33 kent kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5

And it works.  I start qemu, the device disappears on the host, the guest OS
detects it during boot, and this causes a "reset":

May 11 22:27:31 kent kernel: usb 1-1: reset high-speed USB device number 5
using xhci_hcd

After which the device is still not back in the host, and also inaccessible in
the guest (FreeBSD says "device not configured" when i try to access it).

Is this right here, or should i open an USB bug?
Happy to help or test, thank you!

-- 
You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 207707] USB pass through to qemu/kvm causes CDROM reset and "device not configured"

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=207707

Steffen Nurpmeso (steffen@sdaoden.eu) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
     Kernel Version|4.19.121                    |5.10.10
         Resolution|---                         |OBSOLETE

--- Comment #1 from Steffen Nurpmeso (steffen@sdaoden.eu) ---
It seems fixed with 5.10.10.

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.