From: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> To: joro@8bytes.org, mst@redhat.com Cc: virtio-dev@lists.oasis-open.org, kevin.tian@intel.com, Lorenzo.Pieralisi@arm.com, tnowicki@caviumnetworks.com, frowand.list@gmail.com, devicetree@vger.kernel.org, linux-pci@vger.kernel.org, jasowang@redhat.com, virtualization@lists.linux-foundation.org, iommu@lists.linux-foundation.org, robh+dt@kernel.org, bhelgaas@google.com, robin.murphy@arm.com, kvmarm@lists.cs.columbia.edu, bauerman@linux.ibm.com Subject: [PATCH v8 2/7] dt-bindings: virtio: Add virtio-pci-iommu node Date: Thu, 30 May 2019 18:09:24 +0100 Message-ID: <20190530170929.19366-3-jean-philippe.brucker@arm.com> (raw) In-Reply-To: <20190530170929.19366-1-jean-philippe.brucker@arm.com> Some systems implement virtio-iommu as a PCI endpoint. The operating system needs to discover the relationship between IOMMU and masters long before the PCI endpoint gets probed. Add a PCI child node to describe the virtio-iommu device. The virtio-pci-iommu is conceptually split between a PCI programming interface and a translation component on the parent bus. The latter doesn't have a node in the device tree. The virtio-pci-iommu node describes both, by linking the PCI endpoint to "iommus" property of DMA master nodes and to "iommu-map" properties of bus nodes. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> --- .../devicetree/bindings/virtio/iommu.txt | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/virtio/iommu.txt diff --git a/Documentation/devicetree/bindings/virtio/iommu.txt b/Documentation/devicetree/bindings/virtio/iommu.txt new file mode 100644 index 000000000000..2407fea0651c --- /dev/null +++ b/Documentation/devicetree/bindings/virtio/iommu.txt @@ -0,0 +1,66 @@ +* virtio IOMMU PCI device + +When virtio-iommu uses the PCI transport, its programming interface is +discovered dynamically by the PCI probing infrastructure. However the +device tree statically describes the relation between IOMMU and DMA +masters. Therefore, the PCI root complex that hosts the virtio-iommu +contains a child node representing the IOMMU device explicitly. + +Required properties: + +- compatible: Should be "virtio,pci-iommu" +- reg: PCI address of the IOMMU. As defined in the PCI Bus + Binding reference [1], the reg property is a five-cell + address encoded as (phys.hi phys.mid phys.lo size.hi + size.lo). phys.hi should contain the device's BDF as + 0b00000000 bbbbbbbb dddddfff 00000000. The other cells + should be zero. +- #iommu-cells: Each platform DMA master managed by the IOMMU is assigned + an endpoint ID, described by the "iommus" property [2]. + For virtio-iommu, #iommu-cells must be 1. + +Notes: + +- DMA from the IOMMU device isn't managed by another IOMMU. Therefore the + virtio-iommu node doesn't have an "iommus" property, and is omitted from + the iommu-map property of the root complex. + +Example: + +pcie@10000000 { + compatible = "pci-host-ecam-generic"; + ... + + /* The IOMMU programming interface uses slot 00:01.0 */ + iommu0: iommu@0008 { + compatible = "virtio,pci-iommu"; + reg = <0x00000800 0 0 0 0>; + #iommu-cells = <1>; + }; + + /* + * The IOMMU manages all functions in this PCI domain except + * itself. Omit BDF 00:01.0. + */ + iommu-map = <0x0 &iommu0 0x0 0x8> + <0x9 &iommu0 0x9 0xfff7>; +}; + +pcie@20000000 { + compatible = "pci-host-ecam-generic"; + ... + /* + * The IOMMU also manages all functions from this domain, + * with endpoint IDs 0x10000 - 0x1ffff + */ + iommu-map = <0x0 &iommu0 0x10000 0x10000>; +}; + +ethernet@fe001000 { + ... + /* The IOMMU manages this platform device with endpoint ID 0x20000 */ + iommus = <&iommu0 0x20000>; +}; + +[1] Documentation/devicetree/bindings/pci/pci.txt +[2] Documentation/devicetree/bindings/iommu/iommu.txt -- 2.21.0 _______________________________________________ kvmarm mailing list kvmarm@lists.cs.columbia.edu https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
next prev parent reply index Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-30 17:09 [PATCH v8 0/7] Add virtio-iommu driver Jean-Philippe Brucker 2019-05-30 17:09 ` [PATCH v8 1/7] dt-bindings: virtio-mmio: Add IOMMU description Jean-Philippe Brucker 2019-05-30 17:09 ` Jean-Philippe Brucker [this message] 2019-05-30 17:45 ` [PATCH v8 2/7] dt-bindings: virtio: Add virtio-pci-iommu node Michael S. Tsirkin 2019-05-31 11:13 ` [virtio-dev] " Jean-Philippe Brucker 2019-06-16 20:04 ` Michael S. Tsirkin 2019-05-30 17:09 ` [PATCH v8 3/7] of: Allow the iommu-map property to omit untranslated devices Jean-Philippe Brucker 2019-05-30 17:09 ` [PATCH v8 4/7] PCI: OF: Initialize dev->fwnode appropriately Jean-Philippe Brucker 2019-05-30 17:09 ` [PATCH v8 5/7] iommu: Add virtio-iommu driver Jean-Philippe Brucker 2019-06-14 7:33 ` Auger Eric 2019-05-30 17:09 ` [PATCH v8 6/7] iommu/virtio: Add probe request Jean-Philippe Brucker 2019-05-30 17:09 ` [PATCH v8 7/7] iommu/virtio: Add event queue Jean-Philippe Brucker 2019-06-13 15:54 ` [PATCH v8 0/7] Add virtio-iommu driver Auger Eric
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190530170929.19366-3-jean-philippe.brucker@arm.com \ --to=jean-philippe.brucker@arm.com \ --cc=Lorenzo.Pieralisi@arm.com \ --cc=bauerman@linux.ibm.com \ --cc=bhelgaas@google.com \ --cc=devicetree@vger.kernel.org \ --cc=frowand.list@gmail.com \ --cc=iommu@lists.linux-foundation.org \ --cc=jasowang@redhat.com \ --cc=joro@8bytes.org \ --cc=kevin.tian@intel.com \ --cc=kvmarm@lists.cs.columbia.edu \ --cc=linux-pci@vger.kernel.org \ --cc=mst@redhat.com \ --cc=robh+dt@kernel.org \ --cc=robin.murphy@arm.com \ --cc=tnowicki@caviumnetworks.com \ --cc=virtio-dev@lists.oasis-open.org \ --cc=virtualization@lists.linux-foundation.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
KVM ARM Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \ kvmarm@lists.cs.columbia.edu public-inbox-index kvmarm Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm AGPL code for this site: git clone https://public-inbox.org/public-inbox.git