kvmarm.lists.cs.columbia.edu archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] KVM: arm64: Don't write junk to sysregs on reset
Date: Fri,  9 Aug 2019 08:48:30 +0100	[thread overview]
Message-ID: <20190809074832.13283-3-maz@kernel.org> (raw)
In-Reply-To: <20190809074832.13283-1-maz@kernel.org>

At the moment, the way we reset system registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.

The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a system register while junk is in there, bad thing may happen.

Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something. This requires fixing a couple of
sysreg refinition in the trap table.

In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the sysregs leave outside of
the sys_regs[] array). It may well be axed in the near future.

Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 arch/arm64/kvm/sys_regs.c | 32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index f26e181d881c..2071260a275b 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -632,7 +632,7 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	 */
 	val = ((pmcr & ~ARMV8_PMU_PMCR_MASK)
 	       | (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E);
-	__vcpu_sys_reg(vcpu, PMCR_EL0) = val;
+	__vcpu_sys_reg(vcpu, r->reg) = val;
 }
 
 static bool check_pmu_access_disabled(struct kvm_vcpu *vcpu, u64 flags)
@@ -981,13 +981,13 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
 #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
 	{ SYS_DESC(SYS_DBGBVRn_EL1(n)),					\
-	  trap_bvr, reset_bvr, n, 0, get_bvr, set_bvr },		\
+	  trap_bvr, reset_bvr, 0, 0, get_bvr, set_bvr },		\
 	{ SYS_DESC(SYS_DBGBCRn_EL1(n)),					\
-	  trap_bcr, reset_bcr, n, 0, get_bcr, set_bcr },		\
+	  trap_bcr, reset_bcr, 0, 0, get_bcr, set_bcr },		\
 	{ SYS_DESC(SYS_DBGWVRn_EL1(n)),					\
-	  trap_wvr, reset_wvr, n, 0,  get_wvr, set_wvr },		\
+	  trap_wvr, reset_wvr, 0, 0,  get_wvr, set_wvr },		\
 	{ SYS_DESC(SYS_DBGWCRn_EL1(n)),					\
-	  trap_wcr, reset_wcr, n, 0,  get_wcr, set_wcr }
+	  trap_wcr, reset_wcr, 0, 0,  get_wcr, set_wcr }
 
 /* Macro to expand the PMEVCNTRn_EL0 register */
 #define PMU_PMEVCNTR_EL0(n)						\
@@ -1540,7 +1540,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 },
 	{ SYS_DESC(SYS_CTR_EL0), access_ctr },
 
-	{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, },
+	{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, PMCR_EL0 },
 	{ SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
 	{ SYS_DESC(SYS_PMCNTENCLR_EL0), access_pmcnten, NULL, PMCNTENSET_EL0 },
 	{ SYS_DESC(SYS_PMOVSCLR_EL0), access_pmovs, NULL, PMOVSSET_EL0 },
@@ -2254,13 +2254,19 @@ static int emulate_sys_reg(struct kvm_vcpu *vcpu,
 }
 
 static void reset_sys_reg_descs(struct kvm_vcpu *vcpu,
-			      const struct sys_reg_desc *table, size_t num)
+				const struct sys_reg_desc *table, size_t num,
+				unsigned long *bmap)
 {
 	unsigned long i;
 
 	for (i = 0; i < num; i++)
-		if (table[i].reset)
+		if (table[i].reset) {
+			int reg = table[i].reg;
+
 			table[i].reset(vcpu, &table[i]);
+			if (reg > 0 && reg < NR_SYS_REGS)
+				set_bit(reg, bmap);
+		}
 }
 
 /**
@@ -2774,18 +2780,16 @@ void kvm_reset_sys_regs(struct kvm_vcpu *vcpu)
 {
 	size_t num;
 	const struct sys_reg_desc *table;
-
-	/* Catch someone adding a register without putting in reset entry. */
-	memset(&vcpu->arch.ctxt.sys_regs, 0x42, sizeof(vcpu->arch.ctxt.sys_regs));
+	DECLARE_BITMAP(bmap, NR_SYS_REGS) = { 0, };
 
 	/* Generic chip reset first (so target could override). */
-	reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
+	reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs), bmap);
 
 	table = get_target_table(vcpu->arch.target, true, &num);
-	reset_sys_reg_descs(vcpu, table, num);
+	reset_sys_reg_descs(vcpu, table, num, bmap);
 
 	for (num = 1; num < NR_SYS_REGS; num++) {
-		if (WARN(__vcpu_sys_reg(vcpu, num) == 0x4242424242424242,
+		if (WARN(!test_bit(num, bmap),
 			 "Didn't reset __vcpu_sys_reg(%zi)\n", num))
 			break;
 	}
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply	other threads:[~2019-08-09  7:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09  7:48 [GIT PULL] KVM/arm updates for 5.3-rc4 Marc Zyngier
2019-08-09  7:48 ` [PATCH 1/4] KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block Marc Zyngier
2019-08-09  7:48 ` Marc Zyngier [this message]
2019-08-09  7:48 ` [PATCH 3/4] KVM: arm: Don't write junk to CP15 registers on reset Marc Zyngier
2019-08-09  7:48 ` [PATCH 4/4] KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable Marc Zyngier
2019-08-09 15:47 ` [GIT PULL] KVM/arm updates for 5.3-rc4 Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809074832.13283-3-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).