kvmarm.lists.cs.columbia.edu archive mirror
 help / color / mirror / Atom feed
From: Jianyong Wu <jianyong.wu@arm.com>
To: netdev@vger.kernel.org, yangbo.lu@nxp.com,
	john.stultz@linaro.org, tglx@linutronix.de, pbonzini@redhat.com,
	sean.j.christopherson@intel.com, maz@kernel.org,
	richardcochran@gmail.com, Mark.Rutland@arm.com, will@kernel.org,
	suzuki.poulose@arm.com
Cc: justin.he@arm.com, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org, nd@arm.com,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v6 0/7] Enable ptp_kvm for arm64
Date: Thu, 24 Oct 2019 19:02:02 +0800	[thread overview]
Message-ID: <20191024110209.21328-1-jianyong.wu@arm.com> (raw)

kvm ptp targets to provide high precision time sync between guest
and host in virtualization environment. This patch enable kvm ptp
for arm64.
This patch set base on [1][2][3]

change log:
from v5 to v6:
        (1) apply Mark's patch[4] to get SMCCC conduit.
        (2) add mechanism to recognize current clocksource by add
clocksouce_id value into struct clocksource instead of method in patch-v5.
        (3) rename kvm_arch_ptp_get_clock_fn into
kvm_arch_ptp_get_crosststamp.

from v4 to v5:
        (1) remove hvc delay compensasion as it should leave to userspace.
        (2) check current clocksource in hvc call service.
        (3) expose current clocksource by adding it to
system_time_snapshot.
        (4) add helper to check if clocksource is arm_arch_counter.
        (5) rename kvm_ptp.c to ptp_kvm_common.c

from v3 to v4:
        (1) fix clocksource of ptp_kvm to arch_sys_counter.
        (2) move kvm_arch_ptp_get_clock_fn into arm_arch_timer.c
        (3) subtract cntvoff before return cycles from host.
        (4) use ktime_get_snapshot instead of getnstimeofday and
get_current_counterval to return time and counter value.
        (5) split ktime and counter into two 32-bit block respectively
to avoid Y2038-safe issue.
        (6) set time compensation to device time as half of the delay of
hvc call.
        (7) add ARM_ARCH_TIMER as dependency of ptp_kvm for
arm64.

from v2 to v3:
        (1) fix some issues in commit log.
        (2) add some receivers in send list.

from v1 to v2:
        (1) move arch-specific code from arch/ to driver/ptp/
        (2) offer mechanism to inform userspace if ptp_kvm service is
available.
        (3) separate ptp_kvm code for arm64 into hypervisor part and
guest part.
        (4) add API to expose monotonic clock and counter value.
        (5) refine code: remove no necessary part and reconsitution.

[1]https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/
commit/?h=kvm/hvc&id=125ea89e4a21e2fc5235410f966a996a1a7148bf
[2]https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/
commit/?h=kvm/hvc&id=464f5a1741e5959c3e4d2be1966ae0093b4dce06
[3]https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/
commit/?h=kvm/hvc&id=6597490e005d0eeca8ed8c1c1d7b4318ee014681
[4]https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git/
commit/?h=for-next/smccc-conduit-cleanup&id=6b7fe77c334ae59fed9500140e08f4f896b36871

Jianyong Wu (6):
  psci: let arm_smccc_1_1_invoke available by modules
  ptp: Reorganize ptp_kvm modules to make it arch-independent.
  time: Add mechanism to recognize clocksource in time_get_snapshot
  psci: Add hvc call service for ptp_kvm.
  ptp: arm64: Enable ptp_kvm for arm64
  kvm: arm64: Add capability check extension for ptp_kvm

Mark Rutland (1):
  arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit()

 drivers/clocksource/arm_arch_timer.c        | 24 ++++++
 drivers/firmware/psci/psci.c                | 16 ++++
 drivers/ptp/Kconfig                         |  2 +-
 drivers/ptp/Makefile                        |  1 +
 drivers/ptp/ptp_kvm_arm64.c                 | 53 +++++++++++++
 drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} | 77 +++++-------------
 drivers/ptp/ptp_kvm_x86.c                   | 87 +++++++++++++++++++++
 include/asm-generic/ptp_kvm.h               | 12 +++
 include/clocksource/arm_arch_timer.h        |  4 +
 include/linux/arm-smccc.h                   | 30 ++++++-
 include/linux/clocksource.h                 |  6 ++
 include/linux/timekeeping.h                 | 12 +--
 include/uapi/linux/kvm.h                    |  1 +
 kernel/time/clocksource.c                   |  3 +
 kernel/time/timekeeping.c                   |  1 +
 virt/kvm/arm/arm.c                          |  1 +
 virt/kvm/arm/psci.c                         | 22 ++++++
 17 files changed, 286 insertions(+), 66 deletions(-)
 create mode 100644 drivers/ptp/ptp_kvm_arm64.c
 rename drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} (63%)
 create mode 100644 drivers/ptp/ptp_kvm_x86.c
 create mode 100644 include/asm-generic/ptp_kvm.h

-- 
2.17.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

             reply	other threads:[~2019-10-24 11:02 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-24 11:02 Jianyong Wu [this message]
2019-10-24 11:02 ` [RFC PATCH v6 1/7] arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit() Jianyong Wu
2019-10-24 11:02 ` [RFC PATCH v6 2/7] psci: Let arm_smccc_1_1_invoke available by modules Jianyong Wu
2019-10-24 11:02 ` [RFC PATCH v6 3/7] ptp: Reorganize ptp_kvm modules to make it arch-independent Jianyong Wu
2019-10-24 11:02 ` [RFC PATCH v6 4/7] time: Add mechanism to recognize clocksource in time_get_snapshot Jianyong Wu
2019-11-07  7:55   ` Thomas Gleixner
2019-11-08  2:34     ` Jianyong Wu (Arm Technology China)
2019-10-24 11:02 ` [RFC PATCH v6 5/7] psci: Add hvc call service for ptp_kvm Jianyong Wu
2019-11-07  8:01   ` Thomas Gleixner
2019-11-08  2:51     ` Jianyong Wu (Arm Technology China)
2019-10-24 11:02 ` [RFC PATCH v6 6/7] ptp: arm64: Enable ptp_kvm for arm64 Jianyong Wu
2019-10-24 11:02 ` [RFC PATCH v6 7/7] kvm: arm64: Add capability check extension for ptp_kvm Jianyong Wu
2019-11-07  5:34 ` [RFC PATCH v6 0/7] Enable ptp_kvm for arm64 Jianyong Wu (Arm Technology China)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191024110209.21328-1-jianyong.wu@arm.com \
    --to=jianyong.wu@arm.com \
    --cc=Mark.Rutland@arm.com \
    --cc=john.stultz@linaro.org \
    --cc=justin.he@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=nd@arm.com \
    --cc=netdev@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tglx@linutronix.de \
    --cc=will@kernel.org \
    --cc=yangbo.lu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).