KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Robert Richter <rrichter@marvell.com>,
	Jayachandran C <jnair@marvell.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v2 02/36] irqchip/gic-v3-its: Factor out wait_for_syncr primitive
Date: Sun, 27 Oct 2019 14:42:00 +0000
Message-ID: <20191027144234.8395-3-maz@kernel.org> (raw)
In-Reply-To: <20191027144234.8395-1-maz@kernel.org>

Waiting for a redistributor to have performed an operation is a
common thing to do, and the idiom is already spread around.
As we're going to make even more use of this, let's have a primitive
that does just that.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 62e54f1a248b..58cb233cf138 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -1075,6 +1075,12 @@ static void lpi_write_config(struct irq_data *d, u8 clr, u8 set)
 		dsb(ishst);
 }
 
+static void wait_for_syncr(void __iomem *rdbase)
+{
+	while (gic_read_lpir(rdbase + GICR_SYNCR) & 1)
+		cpu_relax();
+}
+
 static void lpi_update_config(struct irq_data *d, u8 clr, u8 set)
 {
 	struct its_device *its_dev = irq_data_get_irq_chip_data(d);
@@ -2757,8 +2763,7 @@ static void its_vpe_db_proxy_move(struct its_vpe *vpe, int from, int to)
 
 		rdbase = per_cpu_ptr(gic_rdists->rdist, from)->rd_base;
 		gic_write_lpir(vpe->vpe_db_lpi, rdbase + GICR_CLRLPIR);
-		while (gic_read_lpir(rdbase + GICR_SYNCR) & 1)
-			cpu_relax();
+		wait_for_syncr(rdbase);
 
 		return;
 	}
@@ -2914,8 +2919,7 @@ static void its_vpe_send_inv(struct irq_data *d)
 
 		rdbase = per_cpu_ptr(gic_rdists->rdist, vpe->col_idx)->rd_base;
 		gic_write_lpir(vpe->vpe_db_lpi, rdbase + GICR_INVLPIR);
-		while (gic_read_lpir(rdbase + GICR_SYNCR) & 1)
-			cpu_relax();
+		wait_for_syncr(rdbase);
 	} else {
 		its_vpe_send_cmd(vpe, its_send_inv);
 	}
@@ -2957,8 +2961,7 @@ static int its_vpe_set_irqchip_state(struct irq_data *d,
 			gic_write_lpir(vpe->vpe_db_lpi, rdbase + GICR_SETLPIR);
 		} else {
 			gic_write_lpir(vpe->vpe_db_lpi, rdbase + GICR_CLRLPIR);
-			while (gic_read_lpir(rdbase + GICR_SYNCR) & 1)
-				cpu_relax();
+			wait_for_syncr(rdbase);
 		}
 	} else {
 		if (state)
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-27 14:41 [PATCH v2 00/36] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-10-27 14:41 ` [PATCH v2 01/36] KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put Marc Zyngier
2019-10-27 14:42 ` Marc Zyngier [this message]
2019-10-28  9:20   ` [PATCH v2 02/36] irqchip/gic-v3-its: Factor out wait_for_syncr primitive Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 03/36] irqchip/gic-v3-its: Allow LPI invalidation via the DirectLPI interface Marc Zyngier
2019-10-31  8:49   ` Zenghui Yu
2019-11-01 13:26     ` Marc Zyngier
2019-11-05 10:30       ` Zenghui Yu
2019-11-05 12:12         ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 04/36] irqchip/gic-v3-its: Make is_v4 use a TYPER copy Marc Zyngier
2019-10-28  9:34   ` Zenghui Yu
2019-10-28 10:52     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 05/36] irqchip/gic-v3-its: Kill its->ite_size and use TYPER copy instead Marc Zyngier
2019-10-28  9:40   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 06/36] irqchip/gic-v3-its: Kill its->device_ids " Marc Zyngier
2019-10-31  6:33   ` Zenghui Yu
2019-10-31  8:30     ` Marc Zyngier
2019-10-31  9:08       ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 07/36] irqchip/gic-v3-its: Add get_vlpi_map() helper Marc Zyngier
2019-10-31  3:54   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 08/36] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2019-10-31 11:34   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 09/36] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2019-10-31 12:02   ` Zenghui Yu
2019-11-01 15:13     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 10/36] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2 Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 11/36] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 12/36] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2019-11-01 10:58   ` Zenghui Yu
2019-11-13  8:02   ` Zenghui Yu
2019-11-13  9:47     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 13/36] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2019-11-01 11:05   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 14/36] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2019-11-01 11:10   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 15/36] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2019-11-01 11:13   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 16/36] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2019-11-01 11:23   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 17/36] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2019-11-01 11:34   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 18/36] irqchip/gic-v4.1: Add VPE eviction callback Marc Zyngier
2019-11-01 11:39   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 19/36] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2019-11-01 11:51   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 20/36] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2019-11-01 12:17   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 21/36] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2019-11-01 12:30   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 22/36] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-11-01 12:55   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 23/36] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 24/36] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 25/36] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 26/36] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 27/36] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 28/36] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 29/36] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 30/36] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 31/36] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 32/36] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 33/36] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 34/36] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 35/36] KVM: arm64: GICv4.1: Configure SGIs as HW interrupts Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 36/36] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191027144234.8395-3-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=jnair@marvell.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git