KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Robert Richter <rrichter@marvell.com>,
	Jayachandran C <jnair@marvell.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v2 35/36] KVM: arm64: GICv4.1: Configure SGIs as HW interrupts
Date: Sun, 27 Oct 2019 14:42:33 +0000
Message-ID: <20191027144234.8395-36-maz@kernel.org> (raw)
In-Reply-To: <20191027144234.8395-1-maz@kernel.org>

To enable HW delivery of SGIs, set their hw flag to true, link them
to the corresponding Linux interrupt, which is then activated.

This configures the SGIs at the ITS level, and put the show
on the road!

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 virt/kvm/arm/vgic/vgic-v4.c | 42 +++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/virt/kvm/arm/vgic/vgic-v4.c b/virt/kvm/arm/vgic/vgic-v4.c
index e61c7a149515..0ff6dac16cba 100644
--- a/virt/kvm/arm/vgic/vgic-v4.c
+++ b/virt/kvm/arm/vgic/vgic-v4.c
@@ -97,6 +97,46 @@ static irqreturn_t vgic_v4_doorbell_handler(int irq, void *info)
 	return IRQ_HANDLED;
 }
 
+static void vgic_v4_sync_sgi_config(struct its_vpe *vpe, struct vgic_irq *irq)
+{
+	vpe->sgi_config[irq->intid].enabled	= irq->enabled;
+	vpe->sgi_config[irq->intid].group 	= irq->group;
+	vpe->sgi_config[irq->intid].priority	= irq->priority;
+}
+
+static void vgic_v4_init_vsgis(struct kvm_vcpu *vcpu)
+{
+	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+	int i;
+
+	if (!kvm_vgic_global_state.has_gicv4_1)
+		return;
+
+	/*
+	 * With GICv4.1, every virtual SGI can be directly injected. So
+	 * let's pretend that they are HW interrupts, tied to a host
+	 * IRQ. The SGI code will do its magic.
+	 */
+	for (i = 0; i < VGIC_NR_SGIS; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, i);
+		struct irq_desc *desc;
+		int ret;
+
+		irq->hw = true;
+		irq->host_irq = irq_find_mapping(vpe->sgi_domain, i);
+		vgic_v4_sync_sgi_config(vpe, irq);
+		/*
+		 * SGIs are initialised as disabled. Enable them if
+		 * required by the rest of the VGIC init code.
+		 */
+		desc = irq_to_desc(irq->host_irq);
+		ret = irq_domain_activate_irq(irq_desc_get_irq_data(desc),
+					      false);
+		WARN_ON(ret);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
 /**
  * vgic_v4_init - Initialize the GICv4 data structures
  * @kvm:	Pointer to the VM being initialized
@@ -168,6 +208,8 @@ int vgic_v4_init(struct kvm *kvm)
 			dist->its_vm.nr_vpes = i;
 			break;
 		}
+
+		vgic_v4_init_vsgis(vcpu);
 	}
 
 	if (ret)
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-27 14:41 [PATCH v2 00/36] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-10-27 14:41 ` [PATCH v2 01/36] KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 02/36] irqchip/gic-v3-its: Factor out wait_for_syncr primitive Marc Zyngier
2019-10-28  9:20   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 03/36] irqchip/gic-v3-its: Allow LPI invalidation via the DirectLPI interface Marc Zyngier
2019-10-31  8:49   ` Zenghui Yu
2019-11-01 13:26     ` Marc Zyngier
2019-11-05 10:30       ` Zenghui Yu
2019-11-05 12:12         ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 04/36] irqchip/gic-v3-its: Make is_v4 use a TYPER copy Marc Zyngier
2019-10-28  9:34   ` Zenghui Yu
2019-10-28 10:52     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 05/36] irqchip/gic-v3-its: Kill its->ite_size and use TYPER copy instead Marc Zyngier
2019-10-28  9:40   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 06/36] irqchip/gic-v3-its: Kill its->device_ids " Marc Zyngier
2019-10-31  6:33   ` Zenghui Yu
2019-10-31  8:30     ` Marc Zyngier
2019-10-31  9:08       ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 07/36] irqchip/gic-v3-its: Add get_vlpi_map() helper Marc Zyngier
2019-10-31  3:54   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 08/36] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2019-10-31 11:34   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 09/36] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2019-10-31 12:02   ` Zenghui Yu
2019-11-01 15:13     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 10/36] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2 Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 11/36] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 12/36] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2019-11-01 10:58   ` Zenghui Yu
2019-11-13  8:02   ` Zenghui Yu
2019-11-13  9:47     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 13/36] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2019-11-01 11:05   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 14/36] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2019-11-01 11:10   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 15/36] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2019-11-01 11:13   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 16/36] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2019-11-01 11:23   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 17/36] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2019-11-01 11:34   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 18/36] irqchip/gic-v4.1: Add VPE eviction callback Marc Zyngier
2019-11-01 11:39   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 19/36] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2019-11-01 11:51   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 20/36] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2019-11-01 12:17   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 21/36] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2019-11-01 12:30   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 22/36] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-11-01 12:55   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 23/36] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 24/36] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 25/36] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 26/36] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 27/36] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 28/36] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 29/36] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 30/36] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 31/36] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 32/36] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 33/36] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 34/36] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-10-27 14:42 ` Marc Zyngier [this message]
2019-10-27 14:42 ` [PATCH v2 36/36] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191027144234.8395-36-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=jnair@marvell.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git