kvmarm.lists.cs.columbia.edu archive mirror
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com, maz@kernel.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	qemu-devel@nongnu.org, qemu-arm@nongnu.org
Cc: andre.przywara@arm.com, thuth@redhat.com
Subject: [kvm-unit-tests PATCH 02/16] arm: gic: Provide per-IRQ helper functions
Date: Mon, 16 Dec 2019 15:02:21 +0100	[thread overview]
Message-ID: <20191216140235.10751-3-eric.auger@redhat.com> (raw)
In-Reply-To: <20191216140235.10751-1-eric.auger@redhat.com>

From: Andre Przywara <andre.przywara@arm.com>

A common theme when accessing per-IRQ parameters in the GIC distributor
is to set fields of a certain bit width in a range of MMIO registers.
Examples are the enabled status (one bit per IRQ), the level/edge
configuration (2 bits per IRQ) or the priority (8 bits per IRQ).

Add a generic helper function which is able to mask and set the
respective number of bits, given the IRQ number and the MMIO offset.
Provide wrappers using this function to easily allow configuring an IRQ.

For now assume that private IRQ numbers always refer to the current CPU.
In a GICv2 accessing the "other" private IRQs is not easily doable (the
registers are banked per CPU on the same MMIO address), so we impose the
same limitation on GICv3, even though those registers are not banked
there anymore.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

---

initialize reg
---
 lib/arm/asm/gic-v3.h |  2 +
 lib/arm/asm/gic.h    |  9 +++++
 lib/arm/gic.c        | 90 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 101 insertions(+)

diff --git a/lib/arm/asm/gic-v3.h b/lib/arm/asm/gic-v3.h
index 347be2f..4a445a5 100644
--- a/lib/arm/asm/gic-v3.h
+++ b/lib/arm/asm/gic-v3.h
@@ -23,6 +23,8 @@
 #define GICD_CTLR_ENABLE_G1A		(1U << 1)
 #define GICD_CTLR_ENABLE_G1		(1U << 0)
 
+#define GICD_IROUTER			0x6000
+
 /* Re-Distributor registers, offsets from RD_base */
 #define GICR_TYPER			0x0008
 
diff --git a/lib/arm/asm/gic.h b/lib/arm/asm/gic.h
index 1fc10a0..21cdb58 100644
--- a/lib/arm/asm/gic.h
+++ b/lib/arm/asm/gic.h
@@ -15,6 +15,7 @@
 #define GICD_IIDR			0x0008
 #define GICD_IGROUPR			0x0080
 #define GICD_ISENABLER			0x0100
+#define GICD_ICENABLER			0x0180
 #define GICD_ISPENDR			0x0200
 #define GICD_ICPENDR			0x0280
 #define GICD_ISACTIVER			0x0300
@@ -73,5 +74,13 @@ extern void gic_write_eoir(u32 irqstat);
 extern void gic_ipi_send_single(int irq, int cpu);
 extern void gic_ipi_send_mask(int irq, const cpumask_t *dest);
 
+void gic_set_irq_bit(int irq, int offset);
+void gic_enable_irq(int irq);
+void gic_disable_irq(int irq);
+void gic_set_irq_priority(int irq, u8 prio);
+void gic_set_irq_target(int irq, int cpu);
+void gic_set_irq_group(int irq, int group);
+int gic_get_irq_group(int irq);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASMARM_GIC_H_ */
diff --git a/lib/arm/gic.c b/lib/arm/gic.c
index 9430116..aa9cb86 100644
--- a/lib/arm/gic.c
+++ b/lib/arm/gic.c
@@ -146,3 +146,93 @@ void gic_ipi_send_mask(int irq, const cpumask_t *dest)
 	assert(gic_common_ops && gic_common_ops->ipi_send_mask);
 	gic_common_ops->ipi_send_mask(irq, dest);
 }
+
+enum gic_bit_access {
+	ACCESS_READ,
+	ACCESS_SET,
+	ACCESS_RMW
+};
+
+static u8 gic_masked_irq_bits(int irq, int offset, int bits, u8 value,
+			      enum gic_bit_access access)
+{
+	void *base;
+	int split = 32 / bits;
+	int shift = (irq % split) * bits;
+	u32 reg = 0, mask = ((1U << bits) - 1) << shift;
+
+	switch (gic_version()) {
+	case 2:
+		base = gicv2_dist_base();
+		break;
+	case 3:
+		if (irq < 32)
+			base = gicv3_sgi_base();
+		else
+			base = gicv3_dist_base();
+		break;
+	default:
+		return 0;
+	}
+	base += offset + (irq / split) * 4;
+
+	switch (access) {
+	case ACCESS_READ:
+		return (readl(base) & mask) >> shift;
+	case ACCESS_SET:
+		reg = 0;
+		break;
+	case ACCESS_RMW:
+		reg = readl(base) & ~mask;
+		break;
+	}
+
+	writel(reg | ((u32)value << shift), base);
+
+	return 0;
+}
+
+void gic_set_irq_bit(int irq, int offset)
+{
+	gic_masked_irq_bits(irq, offset, 1, 1, ACCESS_SET);
+}
+
+void gic_enable_irq(int irq)
+{
+	gic_set_irq_bit(irq, GICD_ISENABLER);
+}
+
+void gic_disable_irq(int irq)
+{
+	gic_set_irq_bit(irq, GICD_ICENABLER);
+}
+
+void gic_set_irq_priority(int irq, u8 prio)
+{
+	gic_masked_irq_bits(irq, GICD_IPRIORITYR, 8, prio, ACCESS_RMW);
+}
+
+void gic_set_irq_target(int irq, int cpu)
+{
+	if (irq < 32)
+		return;
+
+	if (gic_version() == 2) {
+		gic_masked_irq_bits(irq, GICD_ITARGETSR, 8, 1U << cpu,
+				    ACCESS_RMW);
+
+		return;
+	}
+
+	writeq(cpus[cpu], gicv3_dist_base() + GICD_IROUTER + irq * 8);
+}
+
+void gic_set_irq_group(int irq, int group)
+{
+	gic_masked_irq_bits(irq, GICD_IGROUPR, 1, group, ACCESS_RMW);
+}
+
+int gic_get_irq_group(int irq)
+{
+	return gic_masked_irq_bits(irq, GICD_IGROUPR, 1, 0, ACCESS_READ);
+}
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply	other threads:[~2019-12-16 14:05 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-16 14:02 [kvm-unit-tests PATCH 00/16] arm/arm64: Add ITS tests Eric Auger
2019-12-16 14:02 ` [kvm-unit-tests PATCH 01/16] libcflat: Add other size defines Eric Auger
2020-01-07  7:35   ` Thomas Huth
2019-12-16 14:02 ` Eric Auger [this message]
2019-12-16 14:02 ` [kvm-unit-tests PATCH 03/16] arm/arm64: gic: Introduce setup_irq() helper Eric Auger
2019-12-16 14:02 ` [kvm-unit-tests PATCH 04/16] arm/arm64: gicv3: Add some re-distributor defines Eric Auger
2019-12-16 14:02 ` [kvm-unit-tests PATCH 05/16] arm/arm64: ITS: Introspection tests Eric Auger
2019-12-18  3:46   ` Zenghui Yu
2019-12-18  8:34     ` Auger Eric
2019-12-20  7:34       ` Zenghui Yu
2019-12-16 14:02 ` [kvm-unit-tests PATCH 06/16] arm/arm64: ITS: Test BASER Eric Auger
2019-12-20  6:59   ` Zenghui Yu
2019-12-16 14:02 ` [kvm-unit-tests PATCH 07/16] arm/arm64: ITS: Set the LPI config and pending tables Eric Auger
2019-12-16 14:02 ` [kvm-unit-tests PATCH 08/16] arm/arm64: ITS: Init the command queue Eric Auger
2019-12-20  7:10   ` Zenghui Yu
2020-01-10 14:19     ` Auger Eric
2019-12-16 14:02 ` [kvm-unit-tests PATCH 09/16] arm/arm64: ITS: Enable/Disable LPIs at re-distributor level Eric Auger
2019-12-16 14:02 ` [kvm-unit-tests PATCH 10/16] arm/arm64: ITS: its_enable_defaults Eric Auger
2019-12-16 14:02 ` [kvm-unit-tests PATCH 11/16] arm/arm64: ITS: Device and collection Initialization Eric Auger
2019-12-20  7:25   ` Zenghui Yu
2020-01-10 14:32     ` Auger Eric
2019-12-16 14:02 ` [kvm-unit-tests PATCH 12/16] arm/arm64: ITS: commands Eric Auger
2019-12-20  7:29   ` Zenghui Yu
2019-12-16 14:02 ` [kvm-unit-tests PATCH 13/16] arm/arm64: ITS: INT functional tests Eric Auger
2019-12-16 14:02 ` [kvm-unit-tests PATCH 14/16] arm/run: Allow Migration tests Eric Auger
2020-01-07  7:39   ` Thomas Huth
2019-12-16 14:02 ` [kvm-unit-tests PATCH 15/16] arm/arm64: ITS: migration tests Eric Auger
2019-12-16 14:02 ` [kvm-unit-tests PATCH 16/16] arm/arm64: ITS: pending table migration test Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191216140235.10751-3-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=andre.przywara@arm.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=maz@kernel.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).