KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Robert Richter <rrichter@marvell.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v3 17/32] irqchip/gic-v4.1: Map the ITS SGIR register page
Date: Tue, 24 Dec 2019 11:10:40 +0000
Message-ID: <20191224111055.11836-18-maz@kernel.org> (raw)
In-Reply-To: <20191224111055.11836-1-maz@kernel.org>

One of the new features of GICv4.1 is to allow virtual SGIs to be
directly signaled to a VPE. For that, the ITS has grown a new
64kB page containing only a single register that is used to
signal a SGI to a given VPE.

Add a second mapping covering this new 64kB range, and take this
opportunity to limit the original mapping to 64kB, which is enough
to cover the span of the ITS registers.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 48d7ee443544..2f94fae67dfd 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -97,6 +97,7 @@ struct its_node {
 	struct mutex		dev_alloc_lock;
 	struct list_head	entry;
 	void __iomem		*base;
+	void __iomem		*sgir_base;
 	phys_addr_t		phys_base;
 	struct its_cmd_block	*cmd_base;
 	struct its_cmd_block	*cmd_write;
@@ -4325,7 +4326,7 @@ static int __init its_probe_one(struct resource *res,
 	struct page *page;
 	int err;
 
-	its_base = ioremap(res->start, resource_size(res));
+	its_base = ioremap(res->start, SZ_64K);
 	if (!its_base) {
 		pr_warn("ITS@%pa: Unable to map ITS registers\n", &res->start);
 		return -ENOMEM;
@@ -4376,6 +4377,13 @@ static int __init its_probe_one(struct resource *res,
 
 		if (is_v4_1(its)) {
 			u32 svpet = FIELD_GET(GITS_TYPER_SVPET, typer);
+
+			its->sgir_base = ioremap(res->start + SZ_128K, SZ_64K);
+			if (!its->sgir_base) {
+				err = -ENOMEM;
+				goto out_free_its;
+			}
+
 			its->mpidr = readl_relaxed(its_base + GITS_MPIDR);
 
 			pr_info("ITS@%pa: Using GICv4.1 mode %08x %08x\n",
@@ -4389,7 +4397,7 @@ static int __init its_probe_one(struct resource *res,
 				get_order(ITS_CMD_QUEUE_SZ));
 	if (!page) {
 		err = -ENOMEM;
-		goto out_free_its;
+		goto out_unmap_sgir;
 	}
 	its->cmd_base = (void *)page_address(page);
 	its->cmd_write = its->cmd_base;
@@ -4456,6 +4464,9 @@ static int __init its_probe_one(struct resource *res,
 	its_free_tables(its);
 out_free_cmd:
 	free_pages((unsigned long)its->cmd_base, get_order(ITS_CMD_QUEUE_SZ));
+out_unmap_sgir:
+	if (its->sgir_base)
+		iounmap(its->sgir_base);
 out_free_its:
 	kfree(its);
 out_unmap:
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-24 11:10 [PATCH v3 00/32] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 01/32] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 02/32] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 03/32] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2 Marc Zyngier
2020-03-09 22:11   ` Robert Richter
2020-03-10 11:41     ` Marc Zyngier
2020-03-10 12:34       ` Robert Richter
2020-03-11  8:45       ` Robert Richter
2020-03-11  9:03         ` Marc Zyngier
2020-03-11  9:18           ` Robert Richter
2019-12-24 11:10 ` [PATCH v3 04/32] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2019-12-28  8:56   ` Zenghui Yu
2019-12-28 10:36     ` Marc Zyngier
2019-12-30  3:50       ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 05/32] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2020-01-20 14:03   ` Zenghui Yu
2020-01-20 15:11     ` Marc Zyngier
2020-01-22  2:59   ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 06/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 07/32] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 08/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 09/32] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 10/32] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 11/32] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 12/32] irqchip/gic-v4.1: Add VPE eviction callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 13/32] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 14/32] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 15/32] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 16/32] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-12-24 11:10 ` Marc Zyngier [this message]
2019-12-24 11:10 ` [PATCH v3 18/32] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 19/32] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 20/32] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 21/32] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 22/32] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 23/32] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 24/32] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 25/32] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 26/32] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 27/32] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 28/32] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-12-28  9:19   ` Zenghui Yu
2019-12-28 10:41     ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 29/32] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-01-15  2:49   ` Shaokun Zhang
2020-01-15  3:49     ` Zenghui Yu
2020-01-15 13:32       ` Marc Zyngier
2020-01-15 13:49         ` Zenghui Yu
2020-01-16  6:13         ` Shaokun Zhang
2020-01-15 13:17     ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 30/32] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 31/32] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 32/32] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191224111055.11836-18-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git