KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Robert Richter <rrichter@marvell.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v3 29/32] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts
Date: Tue, 24 Dec 2019 11:10:52 +0000
Message-ID: <20191224111055.11836-30-maz@kernel.org> (raw)
In-Reply-To: <20191224111055.11836-1-maz@kernel.org>

In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.

Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 include/kvm/arm_vgic.h      |  3 ++
 virt/kvm/arm/vgic/vgic-v3.c |  2 +
 virt/kvm/arm/vgic/vgic-v4.c | 96 +++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic.h    |  1 +
 4 files changed, 102 insertions(+)

diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 63457908c9c4..69f4164d6477 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -231,6 +231,9 @@ struct vgic_dist {
 	/* distributor enabled */
 	bool			enabled;
 
+	/* Wants SGIs without active state */
+	bool			nassgireq;
+
 	struct vgic_irq		*spis;
 
 	struct vgic_io_device	dist_iodev;
diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
index c2fdea201747..c79a251c4974 100644
--- a/virt/kvm/arm/vgic/vgic-v3.c
+++ b/virt/kvm/arm/vgic/vgic-v3.c
@@ -540,6 +540,8 @@ int vgic_v3_map_resources(struct kvm *kvm)
 		goto out;
 	}
 
+	if (kvm_vgic_global_state.has_gicv4_1)
+		vgic_v4_configure_vsgis(kvm);
 	dist->ready = true;
 
 out:
diff --git a/virt/kvm/arm/vgic/vgic-v4.c b/virt/kvm/arm/vgic/vgic-v4.c
index c2fcde104ea2..063785fd2dc7 100644
--- a/virt/kvm/arm/vgic/vgic-v4.c
+++ b/virt/kvm/arm/vgic/vgic-v4.c
@@ -97,6 +97,102 @@ static irqreturn_t vgic_v4_doorbell_handler(int irq, void *info)
 	return IRQ_HANDLED;
 }
 
+static void vgic_v4_sync_sgi_config(struct its_vpe *vpe, struct vgic_irq *irq)
+{
+	vpe->sgi_config[irq->intid].enabled	= irq->enabled;
+	vpe->sgi_config[irq->intid].group 	= irq->group;
+	vpe->sgi_config[irq->intid].priority	= irq->priority;
+}
+
+static void vgic_v4_enable_vsgis(struct kvm_vcpu *vcpu)
+{
+	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+	int i;
+
+	/*
+	 * With GICv4.1, every virtual SGI can be directly injected. So
+	 * let's pretend that they are HW interrupts, tied to a host
+	 * IRQ. The SGI code will do its magic.
+	 */
+	for (i = 0; i < VGIC_NR_SGIS; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, i);
+		struct irq_desc *desc;
+		int ret;
+
+		if (irq->hw) {
+			vgic_put_irq(vcpu->kvm, irq);
+			continue;
+		}
+
+		irq->hw = true;
+		irq->host_irq = irq_find_mapping(vpe->sgi_domain, i);
+		vgic_v4_sync_sgi_config(vpe, irq);
+		/*
+		 * SGIs are initialised as disabled. Enable them if
+		 * required by the rest of the VGIC init code.
+		 */
+		desc = irq_to_desc(irq->host_irq);
+		ret = irq_domain_activate_irq(irq_desc_get_irq_data(desc),
+					      false);
+		if (!WARN_ON(ret)) {
+			/* Transfer pending state */
+			ret = irq_set_irqchip_state(irq->host_irq,
+						    IRQCHIP_STATE_PENDING,
+						    irq->pending_latch);
+			WARN_ON(ret);
+			irq->pending_latch = false;
+		}
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+static void vgic_v4_disable_vsgis(struct kvm_vcpu *vcpu)
+{
+	int i;
+
+	for (i = 0; i < VGIC_NR_SGIS; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, i);
+		struct irq_desc *desc;
+		int ret;
+
+		if (!irq->hw) {
+			vgic_put_irq(vcpu->kvm, irq);
+			continue;
+		}
+
+		irq->hw = false;
+		ret = irq_get_irqchip_state(irq->host_irq,
+					    IRQCHIP_STATE_PENDING,
+					    &irq->pending_latch);
+		WARN_ON(ret);
+
+		desc = irq_to_desc(irq->host_irq);
+		irq_domain_deactivate_irq(irq_desc_get_irq_data(desc));
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+/* Must be called with the kvm lock held */
+void vgic_v4_configure_vsgis(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct kvm_vcpu *vcpu;
+	int i;
+
+	kvm_arm_halt_guest(kvm);
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (dist->nassgireq)
+			vgic_v4_enable_vsgis(vcpu);
+		else
+			vgic_v4_disable_vsgis(vcpu);
+	}
+
+	kvm_arm_resume_guest(kvm);
+}
+
 /**
  * vgic_v4_init - Initialize the GICv4 data structures
  * @kvm:	Pointer to the VM being initialized
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index c7fefd6b1c80..769e4802645e 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -316,5 +316,6 @@ void vgic_its_invalidate_cache(struct kvm *kvm);
 bool vgic_supports_direct_msis(struct kvm *kvm);
 int vgic_v4_init(struct kvm *kvm);
 void vgic_v4_teardown(struct kvm *kvm);
+void vgic_v4_configure_vsgis(struct kvm *kvm);
 
 #endif
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-24 11:10 [PATCH v3 00/32] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 01/32] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 02/32] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 03/32] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2 Marc Zyngier
2020-03-09 22:11   ` Robert Richter
2020-03-10 11:41     ` Marc Zyngier
2020-03-10 12:34       ` Robert Richter
2020-03-11  8:45       ` Robert Richter
2020-03-11  9:03         ` Marc Zyngier
2020-03-11  9:18           ` Robert Richter
2019-12-24 11:10 ` [PATCH v3 04/32] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2019-12-28  8:56   ` Zenghui Yu
2019-12-28 10:36     ` Marc Zyngier
2019-12-30  3:50       ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 05/32] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2020-01-20 14:03   ` Zenghui Yu
2020-01-20 15:11     ` Marc Zyngier
2020-01-22  2:59   ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 06/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 07/32] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 08/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 09/32] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 10/32] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 11/32] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 12/32] irqchip/gic-v4.1: Add VPE eviction callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 13/32] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 14/32] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 15/32] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 16/32] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 17/32] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 18/32] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 19/32] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 20/32] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 21/32] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 22/32] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 23/32] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 24/32] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 25/32] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 26/32] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 27/32] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 28/32] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-12-28  9:19   ` Zenghui Yu
2019-12-28 10:41     ` Marc Zyngier
2019-12-24 11:10 ` Marc Zyngier [this message]
2020-01-15  2:49   ` [PATCH v3 29/32] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Shaokun Zhang
2020-01-15  3:49     ` Zenghui Yu
2020-01-15 13:32       ` Marc Zyngier
2020-01-15 13:49         ` Zenghui Yu
2020-01-16  6:13         ` Shaokun Zhang
2020-01-15 13:17     ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 30/32] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 31/32] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 32/32] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191224111055.11836-30-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git