KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Robert Richter <rrichter@marvell.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v3 31/32] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable
Date: Tue, 24 Dec 2019 11:10:54 +0000
Message-ID: <20191224111055.11836-32-maz@kernel.org> (raw)
In-Reply-To: <20191224111055.11836-1-maz@kernel.org>

Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.

Of course, we only support Group-1 for now...

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 arch/arm64/include/asm/kvm_host.h | 1 +
 virt/kvm/arm/arm.c                | 8 ++++++++
 virt/kvm/arm/vgic/vgic-mmio-v3.c  | 5 ++++-
 3 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index c61260cf63c5..4aeff0cc4ecf 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -45,6 +45,7 @@
 #define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
 #define KVM_REQ_VCPU_RESET	KVM_ARCH_REQ(2)
 #define KVM_REQ_RECORD_STEAL	KVM_ARCH_REQ(3)
+#define KVM_REQ_RELOAD_GICv4	KVM_ARCH_REQ(4)
 
 DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
 
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index 12e0280291ce..a398dd449880 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -682,6 +682,14 @@ static void check_vcpu_requests(struct kvm_vcpu *vcpu)
 
 		if (kvm_check_request(KVM_REQ_RECORD_STEAL, vcpu))
 			kvm_update_stolen_time(vcpu);
+
+		if (kvm_check_request(KVM_REQ_RELOAD_GICv4, vcpu)) {
+			/* The distributor enable bits were changed */
+			preempt_disable();
+			vgic_v4_put(vcpu, false);
+			vgic_v4_load(vcpu);
+			preempt_enable();
+		}
 	}
 }
 
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index 31ff8c7e09b0..4e72fc08a973 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -132,7 +132,10 @@ static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
 		if (is_hwsgi != dist->nassgireq)
 			vgic_v4_configure_vsgis(vcpu->kvm);
 
-		if (!was_enabled && dist->enabled)
+		if (kvm_vgic_global_state.has_gicv4_1 &&
+		    was_enabled != dist->enabled)
+			kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_RELOAD_GICv4);
+		else if (!was_enabled && dist->enabled)
 			vgic_kick_vcpus(vcpu->kvm);
 
 		mutex_unlock(&vcpu->kvm->lock);
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-24 11:10 [PATCH v3 00/32] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 01/32] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 02/32] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 03/32] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2 Marc Zyngier
2020-03-09 22:11   ` Robert Richter
2020-03-10 11:41     ` Marc Zyngier
2020-03-10 12:34       ` Robert Richter
2020-03-11  8:45       ` Robert Richter
2020-03-11  9:03         ` Marc Zyngier
2020-03-11  9:18           ` Robert Richter
2019-12-24 11:10 ` [PATCH v3 04/32] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2019-12-28  8:56   ` Zenghui Yu
2019-12-28 10:36     ` Marc Zyngier
2019-12-30  3:50       ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 05/32] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2020-01-20 14:03   ` Zenghui Yu
2020-01-20 15:11     ` Marc Zyngier
2020-01-22  2:59   ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 06/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 07/32] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 08/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 09/32] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 10/32] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 11/32] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 12/32] irqchip/gic-v4.1: Add VPE eviction callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 13/32] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 14/32] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 15/32] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 16/32] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 17/32] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 18/32] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 19/32] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 20/32] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 21/32] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 22/32] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 23/32] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 24/32] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 25/32] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 26/32] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 27/32] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 28/32] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-12-28  9:19   ` Zenghui Yu
2019-12-28 10:41     ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 29/32] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-01-15  2:49   ` Shaokun Zhang
2020-01-15  3:49     ` Zenghui Yu
2020-01-15 13:32       ` Marc Zyngier
2020-01-15 13:49         ` Zenghui Yu
2020-01-16  6:13         ` Shaokun Zhang
2020-01-15 13:17     ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 30/32] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2019-12-24 11:10 ` Marc Zyngier [this message]
2019-12-24 11:10 ` [PATCH v3 32/32] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191224111055.11836-32-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git